| /* |
| * linux/arch/sh/kernel/irq.c |
| * |
| * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar |
| * |
| * |
| * SuperH version: Copyright (C) 1999 Niibe Yutaka |
| */ |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/seq_file.h> |
| #include <linux/irq.h> |
| #include <asm/processor.h> |
| #include <asm/machvec.h> |
| #include <asm/uaccess.h> |
| #include <asm/thread_info.h> |
| #include <asm/cpu/mmu_context.h> |
| |
| atomic_t irq_err_count; |
| |
| /* |
| * 'what should we do if we get a hw irq event on an illegal vector'. |
| * each architecture has to answer this themselves, it doesn't deserve |
| * a generic callback i think. |
| */ |
| void ack_bad_irq(unsigned int irq) |
| { |
| atomic_inc(&irq_err_count); |
| printk("unexpected IRQ trap at vector %02x\n", irq); |
| } |
| |
| #if defined(CONFIG_PROC_FS) |
| int show_interrupts(struct seq_file *p, void *v) |
| { |
| int i = *(loff_t *) v, j; |
| struct irqaction * action; |
| unsigned long flags; |
| |
| if (i == 0) { |
| seq_puts(p, " "); |
| for_each_online_cpu(j) |
| seq_printf(p, "CPU%d ",j); |
| seq_putc(p, '\n'); |
| } |
| |
| if (i < sh_mv.mv_nr_irqs) { |
| spin_lock_irqsave(&irq_desc[i].lock, flags); |
| action = irq_desc[i].action; |
| if (!action) |
| goto unlock; |
| seq_printf(p, "%3d: ",i); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); |
| seq_printf(p, " %14s", irq_desc[i].chip->name); |
| seq_printf(p, "-%-8s", irq_desc[i].name); |
| seq_printf(p, " %s", action->name); |
| |
| for (action=action->next; action; action = action->next) |
| seq_printf(p, ", %s", action->name); |
| seq_putc(p, '\n'); |
| unlock: |
| spin_unlock_irqrestore(&irq_desc[i].lock, flags); |
| } else if (i == sh_mv.mv_nr_irqs) |
| seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_4KSTACKS |
| /* |
| * per-CPU IRQ handling contexts (thread information and stack) |
| */ |
| union irq_ctx { |
| struct thread_info tinfo; |
| u32 stack[THREAD_SIZE/sizeof(u32)]; |
| }; |
| |
| static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; |
| static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; |
| #endif |
| |
| asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs = set_irq_regs(regs); |
| #ifdef CONFIG_4KSTACKS |
| union irq_ctx *curctx, *irqctx; |
| #endif |
| |
| irq_enter(); |
| |
| #ifdef CONFIG_DEBUG_STACKOVERFLOW |
| /* Debugging check for stack overflow: is there less than 1KB free? */ |
| { |
| long sp; |
| |
| __asm__ __volatile__ ("and r15, %0" : |
| "=r" (sp) : "0" (THREAD_SIZE - 1)); |
| |
| if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { |
| printk("do_IRQ: stack overflow: %ld\n", |
| sp - sizeof(struct thread_info)); |
| dump_stack(); |
| } |
| } |
| #endif |
| |
| irq = irq_demux(evt2irq(irq)); |
| |
| #ifdef CONFIG_4KSTACKS |
| curctx = (union irq_ctx *)current_thread_info(); |
| irqctx = hardirq_ctx[smp_processor_id()]; |
| |
| /* |
| * this is where we switch to the IRQ stack. However, if we are |
| * already using the IRQ stack (because we interrupted a hardirq |
| * handler) we can't do that and just have to keep using the |
| * current stack (which is the irq stack already after all) |
| */ |
| if (curctx != irqctx) { |
| u32 *isp; |
| |
| isp = (u32 *)((char *)irqctx + sizeof(*irqctx)); |
| irqctx->tinfo.task = curctx->tinfo.task; |
| irqctx->tinfo.previous_sp = current_stack_pointer; |
| |
| /* |
| * Copy the softirq bits in preempt_count so that the |
| * softirq checks work in the hardirq context. |
| */ |
| irqctx->tinfo.preempt_count = |
| (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | |
| (curctx->tinfo.preempt_count & SOFTIRQ_MASK); |
| |
| __asm__ __volatile__ ( |
| "mov %0, r4 \n" |
| "mov r15, r8 \n" |
| "jsr @%1 \n" |
| /* swith to the irq stack */ |
| " mov %2, r15 \n" |
| /* restore the stack (ring zero) */ |
| "mov r8, r15 \n" |
| : /* no outputs */ |
| : "r" (irq), "r" (generic_handle_irq), "r" (isp) |
| : "memory", "r0", "r1", "r2", "r3", "r4", |
| "r5", "r6", "r7", "r8", "t", "pr" |
| ); |
| } else |
| #endif |
| generic_handle_irq(irq); |
| |
| irq_exit(); |
| |
| set_irq_regs(old_regs); |
| return 1; |
| } |
| |
| #ifdef CONFIG_4KSTACKS |
| /* |
| * These should really be __section__(".bss.page_aligned") as well, but |
| * gcc's 3.0 and earlier don't handle that correctly. |
| */ |
| static char softirq_stack[NR_CPUS * THREAD_SIZE] |
| __attribute__((__aligned__(THREAD_SIZE))); |
| |
| static char hardirq_stack[NR_CPUS * THREAD_SIZE] |
| __attribute__((__aligned__(THREAD_SIZE))); |
| |
| /* |
| * allocate per-cpu stacks for hardirq and for softirq processing |
| */ |
| void irq_ctx_init(int cpu) |
| { |
| union irq_ctx *irqctx; |
| |
| if (hardirq_ctx[cpu]) |
| return; |
| |
| irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE]; |
| irqctx->tinfo.task = NULL; |
| irqctx->tinfo.exec_domain = NULL; |
| irqctx->tinfo.cpu = cpu; |
| irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); |
| |
| hardirq_ctx[cpu] = irqctx; |
| |
| irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE]; |
| irqctx->tinfo.task = NULL; |
| irqctx->tinfo.exec_domain = NULL; |
| irqctx->tinfo.cpu = cpu; |
| irqctx->tinfo.preempt_count = 0; |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); |
| |
| softirq_ctx[cpu] = irqctx; |
| |
| printk("CPU %u irqstacks, hard=%p soft=%p\n", |
| cpu, hardirq_ctx[cpu], softirq_ctx[cpu]); |
| } |
| |
| void irq_ctx_exit(int cpu) |
| { |
| hardirq_ctx[cpu] = NULL; |
| } |
| |
| extern asmlinkage void __do_softirq(void); |
| |
| asmlinkage void do_softirq(void) |
| { |
| unsigned long flags; |
| struct thread_info *curctx; |
| union irq_ctx *irqctx; |
| u32 *isp; |
| |
| if (in_interrupt()) |
| return; |
| |
| local_irq_save(flags); |
| |
| if (local_softirq_pending()) { |
| curctx = current_thread_info(); |
| irqctx = softirq_ctx[smp_processor_id()]; |
| irqctx->tinfo.task = curctx->task; |
| irqctx->tinfo.previous_sp = current_stack_pointer; |
| |
| /* build the stack frame on the softirq stack */ |
| isp = (u32 *)((char *)irqctx + sizeof(*irqctx)); |
| |
| __asm__ __volatile__ ( |
| "mov r15, r9 \n" |
| "jsr @%0 \n" |
| /* switch to the softirq stack */ |
| " mov %1, r15 \n" |
| /* restore the thread stack */ |
| "mov r9, r15 \n" |
| : /* no outputs */ |
| : "r" (__do_softirq), "r" (isp) |
| : "memory", "r0", "r1", "r2", "r3", "r4", |
| "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr" |
| ); |
| |
| /* |
| * Shouldnt happen, we returned above if in_interrupt(): |
| */ |
| WARN_ON_ONCE(softirq_count()); |
| } |
| |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL(do_softirq); |
| #endif |
| |
| void __init init_IRQ(void) |
| { |
| #ifdef CONFIG_CPU_HAS_PINT_IRQ |
| init_IRQ_pint(); |
| #endif |
| |
| #ifdef CONFIG_CPU_HAS_INTC2_IRQ |
| init_IRQ_intc2(); |
| #endif |
| |
| #ifdef CONFIG_CPU_HAS_IPR_IRQ |
| init_IRQ_ipr(); |
| #endif |
| |
| /* Perform the machine specific initialisation */ |
| if (sh_mv.mv_init_irq) |
| sh_mv.mv_init_irq(); |
| |
| irq_ctx_init(smp_processor_id()); |
| } |