| /* |
| * arch/s390/kernel/setup.c |
| * |
| * S390 version |
| * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Author(s): Hartmut Penner (hp@de.ibm.com), |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| * |
| * Derived from "arch/i386/kernel/setup.c" |
| * Copyright (C) 1995, Linus Torvalds |
| */ |
| |
| /* |
| * This file handles the architecture-dependent parts of initialization |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/user.h> |
| #include <linux/a.out.h> |
| #include <linux/tty.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/initrd.h> |
| #include <linux/bootmem.h> |
| #include <linux/root_dev.h> |
| #include <linux/console.h> |
| #include <linux/seq_file.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/device.h> |
| #include <linux/notifier.h> |
| #include <linux/pfn.h> |
| #include <linux/ctype.h> |
| #include <linux/reboot.h> |
| |
| #include <asm/ipl.h> |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| #include <asm/smp.h> |
| #include <asm/mmu_context.h> |
| #include <asm/cpcmd.h> |
| #include <asm/lowcore.h> |
| #include <asm/irq.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| #include <asm/sections.h> |
| #include <asm/ebcdic.h> |
| #include <asm/compat.h> |
| |
| long psw_kernel_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY | |
| PSW_MASK_MCHECK | PSW_DEFAULT_KEY); |
| long psw_user_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | |
| PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | |
| PSW_MASK_PSTATE | PSW_DEFAULT_KEY); |
| |
| /* |
| * User copy operations. |
| */ |
| struct uaccess_ops uaccess; |
| EXPORT_SYMBOL(uaccess); |
| |
| /* |
| * Machine setup.. |
| */ |
| unsigned int console_mode = 0; |
| unsigned int console_devno = -1; |
| unsigned int console_irq = -1; |
| unsigned long machine_flags = 0; |
| unsigned long elf_hwcap = 0; |
| char elf_platform[ELF_PLATFORM_SIZE]; |
| |
| struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS]; |
| volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ |
| static unsigned long __initdata memory_end; |
| |
| /* |
| * This is set up by the setup-routine at boot-time |
| * for S390 need to find out, what we have to setup |
| * using address 0x10400 ... |
| */ |
| |
| #include <asm/setup.h> |
| |
| static struct resource code_resource = { |
| .name = "Kernel code", |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, |
| }; |
| |
| static struct resource data_resource = { |
| .name = "Kernel data", |
| .flags = IORESOURCE_BUSY | IORESOURCE_MEM, |
| }; |
| |
| /* |
| * cpu_init() initializes state that is per-CPU. |
| */ |
| void __devinit cpu_init (void) |
| { |
| int addr = hard_smp_processor_id(); |
| |
| /* |
| * Store processor id in lowcore (used e.g. in timer_interrupt) |
| */ |
| get_cpu_id(&S390_lowcore.cpu_data.cpu_id); |
| S390_lowcore.cpu_data.cpu_addr = addr; |
| |
| /* |
| * Force FPU initialization: |
| */ |
| clear_thread_flag(TIF_USEDFPU); |
| clear_used_math(); |
| |
| atomic_inc(&init_mm.mm_count); |
| current->active_mm = &init_mm; |
| if (current->mm) |
| BUG(); |
| enter_lazy_tlb(&init_mm, current); |
| } |
| |
| /* |
| * VM halt and poweroff setup routines |
| */ |
| char vmhalt_cmd[128] = ""; |
| char vmpoff_cmd[128] = ""; |
| static char vmpanic_cmd[128] = ""; |
| |
| static void strncpy_skip_quote(char *dst, char *src, int n) |
| { |
| int sx, dx; |
| |
| dx = 0; |
| for (sx = 0; src[sx] != 0; sx++) { |
| if (src[sx] == '"') continue; |
| dst[dx++] = src[sx]; |
| if (dx >= n) break; |
| } |
| } |
| |
| static int __init vmhalt_setup(char *str) |
| { |
| strncpy_skip_quote(vmhalt_cmd, str, 127); |
| vmhalt_cmd[127] = 0; |
| return 1; |
| } |
| |
| __setup("vmhalt=", vmhalt_setup); |
| |
| static int __init vmpoff_setup(char *str) |
| { |
| strncpy_skip_quote(vmpoff_cmd, str, 127); |
| vmpoff_cmd[127] = 0; |
| return 1; |
| } |
| |
| __setup("vmpoff=", vmpoff_setup); |
| |
| static int vmpanic_notify(struct notifier_block *self, unsigned long event, |
| void *data) |
| { |
| if (MACHINE_IS_VM && strlen(vmpanic_cmd) > 0) |
| cpcmd(vmpanic_cmd, NULL, 0, NULL); |
| |
| return NOTIFY_OK; |
| } |
| |
| #define PANIC_PRI_VMPANIC 0 |
| |
| static struct notifier_block vmpanic_nb = { |
| .notifier_call = vmpanic_notify, |
| .priority = PANIC_PRI_VMPANIC |
| }; |
| |
| static int __init vmpanic_setup(char *str) |
| { |
| static int register_done __initdata = 0; |
| |
| strncpy_skip_quote(vmpanic_cmd, str, 127); |
| vmpanic_cmd[127] = 0; |
| if (!register_done) { |
| register_done = 1; |
| atomic_notifier_chain_register(&panic_notifier_list, |
| &vmpanic_nb); |
| } |
| return 1; |
| } |
| |
| __setup("vmpanic=", vmpanic_setup); |
| |
| /* |
| * condev= and conmode= setup parameter. |
| */ |
| |
| static int __init condev_setup(char *str) |
| { |
| int vdev; |
| |
| vdev = simple_strtoul(str, &str, 0); |
| if (vdev >= 0 && vdev < 65536) { |
| console_devno = vdev; |
| console_irq = -1; |
| } |
| return 1; |
| } |
| |
| __setup("condev=", condev_setup); |
| |
| static int __init conmode_setup(char *str) |
| { |
| #if defined(CONFIG_SCLP_CONSOLE) |
| if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0) |
| SET_CONSOLE_SCLP; |
| #endif |
| #if defined(CONFIG_TN3215_CONSOLE) |
| if (strncmp(str, "3215", 5) == 0) |
| SET_CONSOLE_3215; |
| #endif |
| #if defined(CONFIG_TN3270_CONSOLE) |
| if (strncmp(str, "3270", 5) == 0) |
| SET_CONSOLE_3270; |
| #endif |
| return 1; |
| } |
| |
| __setup("conmode=", conmode_setup); |
| |
| static void __init conmode_default(void) |
| { |
| char query_buffer[1024]; |
| char *ptr; |
| |
| if (MACHINE_IS_VM) { |
| cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL); |
| console_devno = simple_strtoul(query_buffer + 5, NULL, 16); |
| ptr = strstr(query_buffer, "SUBCHANNEL ="); |
| console_irq = simple_strtoul(ptr + 13, NULL, 16); |
| cpcmd("QUERY TERM", query_buffer, 1024, NULL); |
| ptr = strstr(query_buffer, "CONMODE"); |
| /* |
| * Set the conmode to 3215 so that the device recognition |
| * will set the cu_type of the console to 3215. If the |
| * conmode is 3270 and we don't set it back then both |
| * 3215 and the 3270 driver will try to access the console |
| * device (3215 as console and 3270 as normal tty). |
| */ |
| cpcmd("TERM CONMODE 3215", NULL, 0, NULL); |
| if (ptr == NULL) { |
| #if defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| return; |
| } |
| if (strncmp(ptr + 8, "3270", 4) == 0) { |
| #if defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } else if (strncmp(ptr + 8, "3215", 4) == 0) { |
| #if defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #elif defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| } else if (MACHINE_IS_P390) { |
| #if defined(CONFIG_TN3215_CONSOLE) |
| SET_CONSOLE_3215; |
| #elif defined(CONFIG_TN3270_CONSOLE) |
| SET_CONSOLE_3270; |
| #endif |
| } else { |
| #if defined(CONFIG_SCLP_CONSOLE) |
| SET_CONSOLE_SCLP; |
| #endif |
| } |
| } |
| |
| #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) |
| static void __init setup_zfcpdump(unsigned int console_devno) |
| { |
| static char str[64]; |
| |
| if (ipl_info.type != IPL_TYPE_FCP_DUMP) |
| return; |
| if (console_devno != -1) |
| sprintf(str, "cio_ignore=all,!0.0.%04x,!0.0.%04x", |
| ipl_info.data.fcp.dev_id.devno, console_devno); |
| else |
| sprintf(str, "cio_ignore=all,!0.0.%04x", |
| ipl_info.data.fcp.dev_id.devno); |
| strcat(COMMAND_LINE, str); |
| console_loglevel = 2; |
| } |
| #else |
| static inline void setup_zfcpdump(unsigned int console_devno) {} |
| #endif /* CONFIG_ZFCPDUMP */ |
| |
| #ifdef CONFIG_SMP |
| void (*_machine_restart)(char *command) = machine_restart_smp; |
| void (*_machine_halt)(void) = machine_halt_smp; |
| void (*_machine_power_off)(void) = machine_power_off_smp; |
| #else |
| /* |
| * Reboot, halt and power_off routines for non SMP. |
| */ |
| static void do_machine_restart_nonsmp(char * __unused) |
| { |
| do_reipl(); |
| } |
| |
| static void do_machine_halt_nonsmp(void) |
| { |
| if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) |
| __cpcmd(vmhalt_cmd, NULL, 0, NULL); |
| signal_processor(smp_processor_id(), sigp_stop_and_store_status); |
| } |
| |
| static void do_machine_power_off_nonsmp(void) |
| { |
| if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) |
| __cpcmd(vmpoff_cmd, NULL, 0, NULL); |
| signal_processor(smp_processor_id(), sigp_stop_and_store_status); |
| } |
| |
| void (*_machine_restart)(char *command) = do_machine_restart_nonsmp; |
| void (*_machine_halt)(void) = do_machine_halt_nonsmp; |
| void (*_machine_power_off)(void) = do_machine_power_off_nonsmp; |
| #endif |
| |
| /* |
| * Reboot, halt and power_off stubs. They just call _machine_restart, |
| * _machine_halt or _machine_power_off. |
| */ |
| |
| void machine_restart(char *command) |
| { |
| if (!in_interrupt() || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_restart(command); |
| } |
| |
| void machine_halt(void) |
| { |
| if (!in_interrupt() || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_halt(); |
| } |
| |
| void machine_power_off(void) |
| { |
| if (!in_interrupt() || oops_in_progress) |
| /* |
| * Only unblank the console if we are called in enabled |
| * context or a bust_spinlocks cleared the way for us. |
| */ |
| console_unblank(); |
| _machine_power_off(); |
| } |
| |
| /* |
| * Dummy power off function. |
| */ |
| void (*pm_power_off)(void) = machine_power_off; |
| |
| static int __init early_parse_mem(char *p) |
| { |
| memory_end = memparse(p, &p); |
| return 0; |
| } |
| early_param("mem", early_parse_mem); |
| |
| /* |
| * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes |
| */ |
| static int __init early_parse_ipldelay(char *p) |
| { |
| unsigned long delay = 0; |
| |
| delay = simple_strtoul(p, &p, 0); |
| |
| switch (*p) { |
| case 's': |
| case 'S': |
| delay *= 1000000; |
| break; |
| case 'm': |
| case 'M': |
| delay *= 60 * 1000000; |
| } |
| |
| /* now wait for the requested amount of time */ |
| udelay(delay); |
| |
| return 0; |
| } |
| early_param("ipldelay", early_parse_ipldelay); |
| |
| #ifdef CONFIG_S390_SWITCH_AMODE |
| unsigned int switch_amode = 0; |
| EXPORT_SYMBOL_GPL(switch_amode); |
| |
| static void set_amode_and_uaccess(unsigned long user_amode, |
| unsigned long user32_amode) |
| { |
| psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode | |
| PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | |
| PSW_MASK_PSTATE | PSW_DEFAULT_KEY; |
| #ifdef CONFIG_COMPAT |
| psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode | |
| PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | |
| PSW_MASK_PSTATE | PSW_DEFAULT_KEY; |
| psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode | |
| PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK | |
| PSW32_MASK_PSTATE; |
| #endif |
| psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | |
| PSW_MASK_MCHECK | PSW_DEFAULT_KEY; |
| |
| if (MACHINE_HAS_MVCOS) { |
| printk("mvcos available.\n"); |
| memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess)); |
| } else { |
| printk("mvcos not available.\n"); |
| memcpy(&uaccess, &uaccess_pt, sizeof(uaccess)); |
| } |
| } |
| |
| /* |
| * Switch kernel/user addressing modes? |
| */ |
| static int __init early_parse_switch_amode(char *p) |
| { |
| switch_amode = 1; |
| return 0; |
| } |
| early_param("switch_amode", early_parse_switch_amode); |
| |
| #else /* CONFIG_S390_SWITCH_AMODE */ |
| static inline void set_amode_and_uaccess(unsigned long user_amode, |
| unsigned long user32_amode) |
| { |
| } |
| #endif /* CONFIG_S390_SWITCH_AMODE */ |
| |
| #ifdef CONFIG_S390_EXEC_PROTECT |
| unsigned int s390_noexec = 0; |
| EXPORT_SYMBOL_GPL(s390_noexec); |
| |
| /* |
| * Enable execute protection? |
| */ |
| static int __init early_parse_noexec(char *p) |
| { |
| if (!strncmp(p, "off", 3)) |
| return 0; |
| switch_amode = 1; |
| s390_noexec = 1; |
| return 0; |
| } |
| early_param("noexec", early_parse_noexec); |
| #endif /* CONFIG_S390_EXEC_PROTECT */ |
| |
| static void setup_addressing_mode(void) |
| { |
| if (s390_noexec) { |
| printk("S390 execute protection active, "); |
| set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY); |
| return; |
| } |
| if (switch_amode) { |
| printk("S390 address spaces switched, "); |
| set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY); |
| } |
| } |
| |
| static void __init |
| setup_lowcore(void) |
| { |
| struct _lowcore *lc; |
| int lc_pages; |
| |
| /* |
| * Setup lowcore for boot cpu |
| */ |
| lc_pages = sizeof(void *) == 8 ? 2 : 1; |
| lc = (struct _lowcore *) |
| __alloc_bootmem(lc_pages * PAGE_SIZE, lc_pages * PAGE_SIZE, 0); |
| memset(lc, 0, lc_pages * PAGE_SIZE); |
| lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; |
| lc->restart_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) restart_int_handler; |
| if (switch_amode) |
| lc->restart_psw.mask |= PSW_ASC_HOME; |
| lc->external_new_psw.mask = psw_kernel_bits; |
| lc->external_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) ext_int_handler; |
| lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT; |
| lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; |
| lc->program_new_psw.mask = psw_kernel_bits; |
| lc->program_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long)pgm_check_handler; |
| lc->mcck_new_psw.mask = |
| psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT; |
| lc->mcck_new_psw.addr = |
| PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; |
| lc->io_new_psw.mask = psw_kernel_bits; |
| lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; |
| lc->ipl_device = S390_lowcore.ipl_device; |
| lc->jiffy_timer = -1LL; |
| lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; |
| lc->async_stack = (unsigned long) |
| __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; |
| lc->panic_stack = (unsigned long) |
| __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; |
| lc->current_task = (unsigned long) init_thread_union.thread_info.task; |
| lc->thread_info = (unsigned long) &init_thread_union; |
| #ifndef CONFIG_64BIT |
| if (MACHINE_HAS_IEEE) { |
| lc->extended_save_area_addr = (__u32) |
| __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0); |
| /* enable extended save area */ |
| __ctl_set_bit(14, 29); |
| } |
| #endif |
| set_prefix((u32)(unsigned long) lc); |
| } |
| |
| static void __init |
| setup_resources(void) |
| { |
| struct resource *res, *sub_res; |
| int i; |
| |
| code_resource.start = (unsigned long) &_text; |
| code_resource.end = (unsigned long) &_etext - 1; |
| data_resource.start = (unsigned long) &_etext; |
| data_resource.end = (unsigned long) &_edata - 1; |
| |
| for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { |
| res = alloc_bootmem_low(sizeof(struct resource)); |
| res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; |
| switch (memory_chunk[i].type) { |
| case CHUNK_READ_WRITE: |
| res->name = "System RAM"; |
| break; |
| case CHUNK_READ_ONLY: |
| res->name = "System ROM"; |
| res->flags |= IORESOURCE_READONLY; |
| break; |
| default: |
| res->name = "reserved"; |
| } |
| res->start = memory_chunk[i].addr; |
| res->end = memory_chunk[i].addr + memory_chunk[i].size - 1; |
| request_resource(&iomem_resource, res); |
| |
| if (code_resource.start >= res->start && |
| code_resource.start <= res->end && |
| code_resource.end > res->end) { |
| sub_res = alloc_bootmem_low(sizeof(struct resource)); |
| memcpy(sub_res, &code_resource, |
| sizeof(struct resource)); |
| sub_res->end = res->end; |
| code_resource.start = res->end + 1; |
| request_resource(res, sub_res); |
| } |
| |
| if (code_resource.start >= res->start && |
| code_resource.start <= res->end && |
| code_resource.end <= res->end) |
| request_resource(res, &code_resource); |
| |
| if (data_resource.start >= res->start && |
| data_resource.start <= res->end && |
| data_resource.end > res->end) { |
| sub_res = alloc_bootmem_low(sizeof(struct resource)); |
| memcpy(sub_res, &data_resource, |
| sizeof(struct resource)); |
| sub_res->end = res->end; |
| data_resource.start = res->end + 1; |
| request_resource(res, sub_res); |
| } |
| |
| if (data_resource.start >= res->start && |
| data_resource.start <= res->end && |
| data_resource.end <= res->end) |
| request_resource(res, &data_resource); |
| } |
| } |
| |
| unsigned long real_memory_size; |
| EXPORT_SYMBOL_GPL(real_memory_size); |
| |
| static void __init setup_memory_end(void) |
| { |
| unsigned long memory_size; |
| unsigned long max_mem, max_phys; |
| int i; |
| |
| #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) |
| if (ipl_info.type == IPL_TYPE_FCP_DUMP) |
| memory_end = ZFCPDUMP_HSA_SIZE; |
| #endif |
| memory_size = 0; |
| max_phys = VMALLOC_END_INIT - VMALLOC_MIN_SIZE; |
| memory_end &= PAGE_MASK; |
| |
| max_mem = memory_end ? min(max_phys, memory_end) : max_phys; |
| |
| for (i = 0; i < MEMORY_CHUNKS; i++) { |
| struct mem_chunk *chunk = &memory_chunk[i]; |
| |
| real_memory_size = max(real_memory_size, |
| chunk->addr + chunk->size); |
| if (chunk->addr >= max_mem) { |
| memset(chunk, 0, sizeof(*chunk)); |
| continue; |
| } |
| if (chunk->addr + chunk->size > max_mem) |
| chunk->size = max_mem - chunk->addr; |
| memory_size = max(memory_size, chunk->addr + chunk->size); |
| } |
| if (!memory_end) |
| memory_end = memory_size; |
| } |
| |
| static void __init |
| setup_memory(void) |
| { |
| unsigned long bootmap_size; |
| unsigned long start_pfn, end_pfn; |
| int i; |
| |
| /* |
| * partially used pages are not usable - thus |
| * we are rounding upwards: |
| */ |
| start_pfn = PFN_UP(__pa(&_end)); |
| end_pfn = max_pfn = PFN_DOWN(memory_end); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| /* |
| * Move the initrd in case the bitmap of the bootmem allocater |
| * would overwrite it. |
| */ |
| |
| if (INITRD_START && INITRD_SIZE) { |
| unsigned long bmap_size; |
| unsigned long start; |
| |
| bmap_size = bootmem_bootmap_pages(end_pfn - start_pfn + 1); |
| bmap_size = PFN_PHYS(bmap_size); |
| |
| if (PFN_PHYS(start_pfn) + bmap_size > INITRD_START) { |
| start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE; |
| |
| if (start + INITRD_SIZE > memory_end) { |
| printk("initrd extends beyond end of memory " |
| "(0x%08lx > 0x%08lx)\n" |
| "disabling initrd\n", |
| start + INITRD_SIZE, memory_end); |
| INITRD_START = INITRD_SIZE = 0; |
| } else { |
| printk("Moving initrd (0x%08lx -> 0x%08lx, " |
| "size: %ld)\n", |
| INITRD_START, start, INITRD_SIZE); |
| memmove((void *) start, (void *) INITRD_START, |
| INITRD_SIZE); |
| INITRD_START = start; |
| } |
| } |
| } |
| #endif |
| |
| /* |
| * Initialize the boot-time allocator |
| */ |
| bootmap_size = init_bootmem(start_pfn, end_pfn); |
| |
| /* |
| * Register RAM areas with the bootmem allocator. |
| */ |
| |
| for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { |
| unsigned long start_chunk, end_chunk, pfn; |
| |
| if (memory_chunk[i].type != CHUNK_READ_WRITE) |
| continue; |
| start_chunk = PFN_DOWN(memory_chunk[i].addr); |
| end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1; |
| end_chunk = min(end_chunk, end_pfn); |
| if (start_chunk >= end_chunk) |
| continue; |
| add_active_range(0, start_chunk, end_chunk); |
| pfn = max(start_chunk, start_pfn); |
| for (; pfn <= end_chunk; pfn++) |
| page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY); |
| } |
| |
| psw_set_key(PAGE_DEFAULT_KEY); |
| |
| free_bootmem_with_active_regions(0, max_pfn); |
| |
| /* |
| * Reserve memory used for lowcore/command line/kernel image. |
| */ |
| reserve_bootmem(0, (unsigned long)_ehead); |
| reserve_bootmem((unsigned long)_stext, |
| PFN_PHYS(start_pfn) - (unsigned long)_stext); |
| /* |
| * Reserve the bootmem bitmap itself as well. We do this in two |
| * steps (first step was init_bootmem()) because this catches |
| * the (very unlikely) case of us accidentally initializing the |
| * bootmem allocator with an invalid RAM area. |
| */ |
| reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (INITRD_START && INITRD_SIZE) { |
| if (INITRD_START + INITRD_SIZE <= memory_end) { |
| reserve_bootmem(INITRD_START, INITRD_SIZE); |
| initrd_start = INITRD_START; |
| initrd_end = initrd_start + INITRD_SIZE; |
| } else { |
| printk("initrd extends beyond end of memory " |
| "(0x%08lx > 0x%08lx)\ndisabling initrd\n", |
| initrd_start + INITRD_SIZE, memory_end); |
| initrd_start = initrd_end = 0; |
| } |
| } |
| #endif |
| } |
| |
| static __init unsigned int stfl(void) |
| { |
| asm volatile( |
| " .insn s,0xb2b10000,0(0)\n" /* stfl */ |
| "0:\n" |
| EX_TABLE(0b,0b)); |
| return S390_lowcore.stfl_fac_list; |
| } |
| |
| static __init int stfle(unsigned long long *list, int doublewords) |
| { |
| typedef struct { unsigned long long _[doublewords]; } addrtype; |
| register unsigned long __nr asm("0") = doublewords - 1; |
| |
| asm volatile(".insn s,0xb2b00000,%0" /* stfle */ |
| : "=m" (*(addrtype *) list), "+d" (__nr) : : "cc"); |
| return __nr + 1; |
| } |
| |
| /* |
| * Setup hardware capabilities. |
| */ |
| static void __init setup_hwcaps(void) |
| { |
| static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 }; |
| struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data; |
| unsigned long long facility_list_extended; |
| unsigned int facility_list; |
| int i; |
| |
| facility_list = stfl(); |
| /* |
| * The store facility list bits numbers as found in the principles |
| * of operation are numbered with bit 1UL<<31 as number 0 to |
| * bit 1UL<<0 as number 31. |
| * Bit 0: instructions named N3, "backported" to esa-mode |
| * Bit 2: z/Architecture mode is active |
| * Bit 7: the store-facility-list-extended facility is installed |
| * Bit 17: the message-security assist is installed |
| * Bit 19: the long-displacement facility is installed |
| * Bit 21: the extended-immediate facility is installed |
| * These get translated to: |
| * HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1, |
| * HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3, |
| * HWCAP_S390_LDISP bit 4, and HWCAP_S390_EIMM bit 5. |
| */ |
| for (i = 0; i < 6; i++) |
| if (facility_list & (1UL << (31 - stfl_bits[i]))) |
| elf_hwcap |= 1UL << i; |
| |
| /* |
| * Check for additional facilities with store-facility-list-extended. |
| * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0 |
| * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information |
| * as stored by stfl, bits 32-xxx contain additional facilities. |
| * How many facility words are stored depends on the number of |
| * doublewords passed to the instruction. The additional facilites |
| * are: |
| * Bit 43: decimal floating point facility is installed |
| * translated to: |
| * HWCAP_S390_DFP bit 6. |
| */ |
| if ((elf_hwcap & (1UL << 2)) && |
| stfle(&facility_list_extended, 1) > 0) { |
| if (facility_list_extended & (1ULL << (64 - 43))) |
| elf_hwcap |= 1UL << 6; |
| } |
| |
| switch (cpuinfo->cpu_id.machine) { |
| case 0x9672: |
| #if !defined(CONFIG_64BIT) |
| default: /* Use "g5" as default for 31 bit kernels. */ |
| #endif |
| strcpy(elf_platform, "g5"); |
| break; |
| case 0x2064: |
| case 0x2066: |
| #if defined(CONFIG_64BIT) |
| default: /* Use "z900" as default for 64 bit kernels. */ |
| #endif |
| strcpy(elf_platform, "z900"); |
| break; |
| case 0x2084: |
| case 0x2086: |
| strcpy(elf_platform, "z990"); |
| break; |
| case 0x2094: |
| strcpy(elf_platform, "z9-109"); |
| break; |
| } |
| } |
| |
| /* |
| * Setup function called from init/main.c just after the banner |
| * was printed. |
| */ |
| |
| void __init |
| setup_arch(char **cmdline_p) |
| { |
| /* |
| * print what head.S has found out about the machine |
| */ |
| #ifndef CONFIG_64BIT |
| printk((MACHINE_IS_VM) ? |
| "We are running under VM (31 bit mode)\n" : |
| "We are running native (31 bit mode)\n"); |
| printk((MACHINE_HAS_IEEE) ? |
| "This machine has an IEEE fpu\n" : |
| "This machine has no IEEE fpu\n"); |
| #else /* CONFIG_64BIT */ |
| printk((MACHINE_IS_VM) ? |
| "We are running under VM (64 bit mode)\n" : |
| "We are running native (64 bit mode)\n"); |
| #endif /* CONFIG_64BIT */ |
| |
| /* Save unparsed command line copy for /proc/cmdline */ |
| strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); |
| |
| *cmdline_p = COMMAND_LINE; |
| *(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0'; |
| |
| ROOT_DEV = Root_RAM0; |
| |
| init_mm.start_code = PAGE_OFFSET; |
| init_mm.end_code = (unsigned long) &_etext; |
| init_mm.end_data = (unsigned long) &_edata; |
| init_mm.brk = (unsigned long) &_end; |
| |
| if (MACHINE_HAS_MVCOS) |
| memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess)); |
| else |
| memcpy(&uaccess, &uaccess_std, sizeof(uaccess)); |
| |
| parse_early_param(); |
| |
| setup_ipl_info(); |
| setup_memory_end(); |
| setup_addressing_mode(); |
| setup_memory(); |
| setup_resources(); |
| setup_lowcore(); |
| |
| cpu_init(); |
| __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr; |
| smp_setup_cpu_possible_map(); |
| |
| /* |
| * Setup capabilities (ELF_HWCAP & ELF_PLATFORM). |
| */ |
| setup_hwcaps(); |
| |
| /* |
| * Create kernel page tables and switch to virtual addressing. |
| */ |
| paging_init(); |
| |
| /* Setup default console */ |
| conmode_default(); |
| |
| /* Setup zfcpdump support */ |
| setup_zfcpdump(console_devno); |
| } |
| |
| void print_cpu_info(struct cpuinfo_S390 *cpuinfo) |
| { |
| printk("cpu %d " |
| #ifdef CONFIG_SMP |
| "phys_idx=%d " |
| #endif |
| "vers=%02X ident=%06X machine=%04X unused=%04X\n", |
| cpuinfo->cpu_nr, |
| #ifdef CONFIG_SMP |
| cpuinfo->cpu_addr, |
| #endif |
| cpuinfo->cpu_id.version, |
| cpuinfo->cpu_id.ident, |
| cpuinfo->cpu_id.machine, |
| cpuinfo->cpu_id.unused); |
| } |
| |
| /* |
| * show_cpuinfo - Get information on one CPU for use by procfs. |
| */ |
| |
| static int show_cpuinfo(struct seq_file *m, void *v) |
| { |
| static const char *hwcap_str[7] = { |
| "esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp" |
| }; |
| struct cpuinfo_S390 *cpuinfo; |
| unsigned long n = (unsigned long) v - 1; |
| int i; |
| |
| s390_adjust_jiffies(); |
| preempt_disable(); |
| if (!n) { |
| seq_printf(m, "vendor_id : IBM/S390\n" |
| "# processors : %i\n" |
| "bogomips per cpu: %lu.%02lu\n", |
| num_online_cpus(), loops_per_jiffy/(500000/HZ), |
| (loops_per_jiffy/(5000/HZ))%100); |
| seq_puts(m, "features\t: "); |
| for (i = 0; i < 7; i++) |
| if (hwcap_str[i] && (elf_hwcap & (1UL << i))) |
| seq_printf(m, "%s ", hwcap_str[i]); |
| seq_puts(m, "\n"); |
| } |
| |
| if (cpu_online(n)) { |
| #ifdef CONFIG_SMP |
| if (smp_processor_id() == n) |
| cpuinfo = &S390_lowcore.cpu_data; |
| else |
| cpuinfo = &lowcore_ptr[n]->cpu_data; |
| #else |
| cpuinfo = &S390_lowcore.cpu_data; |
| #endif |
| seq_printf(m, "processor %li: " |
| "version = %02X, " |
| "identification = %06X, " |
| "machine = %04X\n", |
| n, cpuinfo->cpu_id.version, |
| cpuinfo->cpu_id.ident, |
| cpuinfo->cpu_id.machine); |
| } |
| preempt_enable(); |
| return 0; |
| } |
| |
| static void *c_start(struct seq_file *m, loff_t *pos) |
| { |
| return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL; |
| } |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) |
| { |
| ++*pos; |
| return c_start(m, pos); |
| } |
| static void c_stop(struct seq_file *m, void *v) |
| { |
| } |
| struct seq_operations cpuinfo_op = { |
| .start = c_start, |
| .next = c_next, |
| .stop = c_stop, |
| .show = show_cpuinfo, |
| }; |
| |