| /* |
| * uio_aec.c -- simple driver for Adrienne Electronics Corp time code PCI device |
| * |
| * Copyright (C) 2008 Brandon Philips <brandon@ifup.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place, Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/cdev.h> |
| #include <linux/fs.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <linux/uio_driver.h> |
| #include <linux/slab.h> |
| |
| #define PCI_VENDOR_ID_AEC 0xaecb |
| #define PCI_DEVICE_ID_AEC_VITCLTC 0x6250 |
| |
| #define INT_ENABLE_ADDR 0xFC |
| #define INT_ENABLE 0x10 |
| #define INT_DISABLE 0x0 |
| |
| #define INT_MASK_ADDR 0x2E |
| #define INT_MASK_ALL 0x3F |
| |
| #define INTA_DRVR_ADDR 0xFE |
| #define INTA_ENABLED_FLAG 0x08 |
| #define INTA_FLAG 0x01 |
| |
| #define MAILBOX 0x0F |
| |
| static struct pci_device_id ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_AEC, PCI_DEVICE_ID_AEC_VITCLTC), }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, ids); |
| |
| static irqreturn_t aectc_irq(int irq, struct uio_info *dev_info) |
| { |
| void __iomem *int_flag = dev_info->priv + INTA_DRVR_ADDR; |
| unsigned char status = ioread8(int_flag); |
| |
| |
| if ((status & INTA_ENABLED_FLAG) && (status & INTA_FLAG)) { |
| /* application writes 0x00 to 0x2F to get next interrupt */ |
| status = ioread8(dev_info->priv + MAILBOX); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static void print_board_data(struct pci_dev *pdev, struct uio_info *i) |
| { |
| dev_info(&pdev->dev, "PCI-TC board vendor: %x%x number: %x%x" |
| " revision: %c%c\n", |
| ioread8(i->priv + 0x01), |
| ioread8(i->priv + 0x00), |
| ioread8(i->priv + 0x03), |
| ioread8(i->priv + 0x02), |
| ioread8(i->priv + 0x06), |
| ioread8(i->priv + 0x07)); |
| } |
| |
| static int __devinit probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct uio_info *info; |
| int ret; |
| |
| info = kzalloc(sizeof(struct uio_info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| if (pci_enable_device(pdev)) |
| goto out_free; |
| |
| if (pci_request_regions(pdev, "aectc")) |
| goto out_disable; |
| |
| info->name = "aectc"; |
| info->port[0].start = pci_resource_start(pdev, 0); |
| if (!info->port[0].start) |
| goto out_release; |
| info->priv = pci_iomap(pdev, 0, 0); |
| if (!info->priv) |
| goto out_release; |
| info->port[0].size = pci_resource_len(pdev, 0); |
| info->port[0].porttype = UIO_PORT_GPIO; |
| |
| info->version = "0.0.1"; |
| info->irq = pdev->irq; |
| info->irq_flags = IRQF_SHARED; |
| info->handler = aectc_irq; |
| |
| print_board_data(pdev, info); |
| ret = uio_register_device(&pdev->dev, info); |
| if (ret) |
| goto out_unmap; |
| |
| iowrite32(INT_ENABLE, info->priv + INT_ENABLE_ADDR); |
| iowrite8(INT_MASK_ALL, info->priv + INT_MASK_ADDR); |
| if (!(ioread8(info->priv + INTA_DRVR_ADDR) |
| & INTA_ENABLED_FLAG)) |
| dev_err(&pdev->dev, "aectc: interrupts not enabled\n"); |
| |
| pci_set_drvdata(pdev, info); |
| |
| return 0; |
| |
| out_unmap: |
| pci_iounmap(pdev, info->priv); |
| out_release: |
| pci_release_regions(pdev); |
| out_disable: |
| pci_disable_device(pdev); |
| out_free: |
| kfree(info); |
| return -ENODEV; |
| } |
| |
| static void remove(struct pci_dev *pdev) |
| { |
| struct uio_info *info = pci_get_drvdata(pdev); |
| |
| /* disable interrupts */ |
| iowrite8(INT_DISABLE, info->priv + INT_MASK_ADDR); |
| iowrite32(INT_DISABLE, info->priv + INT_ENABLE_ADDR); |
| /* read mailbox to ensure board drops irq */ |
| ioread8(info->priv + MAILBOX); |
| |
| uio_unregister_device(info); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| iounmap(info->priv); |
| |
| kfree(info); |
| } |
| |
| static struct pci_driver pci_driver = { |
| .name = "aectc", |
| .id_table = ids, |
| .probe = probe, |
| .remove = remove, |
| }; |
| |
| static int __init aectc_init(void) |
| { |
| return pci_register_driver(&pci_driver); |
| } |
| |
| static void __exit aectc_exit(void) |
| { |
| pci_unregister_driver(&pci_driver); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| |
| module_init(aectc_init); |
| module_exit(aectc_exit); |