| /* |
| * arch/powerpc/platforms/83xx/mpc834x_sys.c |
| * |
| * MPC834x SYS board specific routines |
| * |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/reboot.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/major.h> |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/module.h> |
| #include <linux/fsl_devices.h> |
| |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/atomic.h> |
| #include <asm/time.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/ipic.h> |
| #include <asm/bootinfo.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/mpc83xx.h> |
| #include <asm/irq.h> |
| #include <mm/mmu_decl.h> |
| #include <asm/prom.h> |
| #include <asm/udbg.h> |
| #include <sysdev/fsl_soc.h> |
| |
| #include "mpc83xx.h" |
| |
| #ifndef CONFIG_PCI |
| unsigned long isa_io_base = 0; |
| unsigned long isa_mem_base = 0; |
| #endif |
| |
| #ifdef CONFIG_PCI |
| extern int mpc83xx_pci2_busno; |
| |
| static int |
| mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) |
| { |
| static char pci_irq_table[][4] = |
| /* |
| * PCI IDSEL/INTPIN->INTLINE |
| * A B C D |
| */ |
| { |
| {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ |
| {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ |
| {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ |
| {0, 0, 0, 0}, |
| {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ |
| {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ |
| {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ |
| {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ |
| {0, 0, 0, 0}, /* idsel 0x19 */ |
| {0, 0, 0, 0}, /* idsel 0x20 */ |
| }; |
| |
| const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; |
| return PCI_IRQ_TABLE_LOOKUP; |
| } |
| |
| static int |
| mpc83xx_exclude_device(u_char bus, u_char devfn) |
| { |
| if (bus == 0 && PCI_SLOT(devfn) == 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (mpc83xx_pci2_busno) |
| if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| return PCIBIOS_SUCCESSFUL; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| /* ************************************************************************ |
| * |
| * Setup the architecture |
| * |
| */ |
| static void __init |
| mpc834x_sys_setup_arch(void) |
| { |
| struct device_node *np; |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc834x_sys_setup_arch()", 0); |
| |
| np = of_find_node_by_type(NULL, "cpu"); |
| if (np != 0) { |
| unsigned int *fp = (int *) get_property(np, "clock-frequency", NULL); |
| if (fp != 0) |
| loops_per_jiffy = *fp / HZ; |
| else |
| loops_per_jiffy = 50000000 / HZ; |
| of_node_put(np); |
| } |
| |
| #ifdef CONFIG_PCI |
| for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) |
| add_bridge(np); |
| |
| ppc_md.pci_swizzle = common_swizzle; |
| ppc_md.pci_map_irq = mpc83xx_map_irq; |
| ppc_md.pci_exclude_device = mpc83xx_exclude_device; |
| #endif |
| |
| #ifdef CONFIG_ROOT_NFS |
| ROOT_DEV = Root_NFS; |
| #else |
| ROOT_DEV = Root_HDA1; |
| #endif |
| } |
| |
| void __init |
| mpc834x_sys_init_IRQ(void) |
| { |
| u8 senses[8] = { |
| 0, /* EXT 0 */ |
| IRQ_SENSE_LEVEL, /* EXT 1 */ |
| IRQ_SENSE_LEVEL, /* EXT 2 */ |
| 0, /* EXT 3 */ |
| #ifdef CONFIG_PCI |
| IRQ_SENSE_LEVEL, /* EXT 4 */ |
| IRQ_SENSE_LEVEL, /* EXT 5 */ |
| IRQ_SENSE_LEVEL, /* EXT 6 */ |
| IRQ_SENSE_LEVEL, /* EXT 7 */ |
| #else |
| 0, /* EXT 4 */ |
| 0, /* EXT 5 */ |
| 0, /* EXT 6 */ |
| 0, /* EXT 7 */ |
| #endif |
| }; |
| |
| ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8); |
| |
| /* Initialize the default interrupt mapping priorities, |
| * in case the boot rom changed something on us. |
| */ |
| ipic_set_default_priority(); |
| } |
| |
| #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) |
| extern ulong ds1374_get_rtc_time(void); |
| extern int ds1374_set_rtc_time(ulong); |
| |
| static int __init |
| mpc834x_rtc_hookup(void) |
| { |
| struct timespec tv; |
| |
| ppc_md.get_rtc_time = ds1374_get_rtc_time; |
| ppc_md.set_rtc_time = ds1374_set_rtc_time; |
| |
| tv.tv_nsec = 0; |
| tv.tv_sec = (ppc_md.get_rtc_time)(); |
| do_settimeofday(&tv); |
| |
| return 0; |
| } |
| late_initcall(mpc834x_rtc_hookup); |
| #endif |
| |
| static void |
| mpc83xx_restart(char *cmd) |
| { |
| #define RST_OFFSET 0x00000900 |
| #define RST_PROT_REG 0x00000018 |
| #define RST_CTRL_REG 0x0000001c |
| __be32 __iomem *reg; |
| |
| // map reset register space |
| reg = ioremap(get_immrbase() + 0x900, 0xff); |
| |
| local_irq_disable(); |
| |
| /* enable software reset "RSTE" */ |
| out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); |
| |
| /* set software hard reset */ |
| out_be32(reg + (RST_CTRL_REG >> 2), 0x52535445); |
| for(;;); |
| } |
| |
| static long __init |
| mpc83xx_time_init(void) |
| { |
| #define SPCR_OFFSET 0x00000110 |
| #define SPCR_TBEN 0x00400000 |
| __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); |
| __be32 tmp; |
| |
| tmp = in_be32(spcr); |
| out_be32(spcr, tmp|SPCR_TBEN); |
| |
| iounmap(spcr); |
| |
| return 0; |
| } |
| void __init |
| platform_init(void) |
| { |
| /* setup the PowerPC module struct */ |
| ppc_md.setup_arch = mpc834x_sys_setup_arch; |
| |
| ppc_md.init_IRQ = mpc834x_sys_init_IRQ; |
| ppc_md.get_irq = ipic_get_irq; |
| |
| ppc_md.restart = mpc83xx_restart; |
| |
| ppc_md.time_init = mpc83xx_time_init; |
| ppc_md.set_rtc_time = NULL; |
| ppc_md.get_rtc_time = NULL; |
| ppc_md.calibrate_decr = generic_calibrate_decr; |
| |
| ppc_md.progress = udbg_progress; |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc834x_sys_init(): exit", 0); |
| |
| return; |
| } |
| |
| |