| /* |
| * Mini SCLP driver. |
| * |
| * Copyright IBM Corp. 2004, 2009 |
| * |
| * Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>, |
| * Heiko Carstens <heiko.carstens@de.ibm.com>, |
| * |
| */ |
| |
| #include <linux/linkage.h> |
| |
| LC_EXT_NEW_PSW = 0x58 # addr of ext int handler |
| LC_EXT_NEW_PSW_64 = 0x1b0 # addr of ext int handler 64 bit |
| LC_EXT_INT_PARAM = 0x80 # addr of ext int parameter |
| LC_EXT_INT_CODE = 0x86 # addr of ext int code |
| LC_AR_MODE_ID = 0xa3 |
| |
| # |
| # Subroutine which waits synchronously until either an external interruption |
| # or a timeout occurs. |
| # |
| # Parameters: |
| # R2 = 0 for no timeout, non-zero for timeout in (approximated) seconds |
| # |
| # Returns: |
| # R2 = 0 on interrupt, 2 on timeout |
| # R3 = external interruption parameter if R2=0 |
| # |
| |
| _sclp_wait_int: |
| stm %r6,%r15,24(%r15) # save registers |
| basr %r13,0 # get base register |
| .LbaseS1: |
| ahi %r15,-96 # create stack frame |
| la %r8,LC_EXT_NEW_PSW # register int handler |
| la %r9,.LextpswS1-.LbaseS1(%r13) |
| #ifdef CONFIG_64BIT |
| tm LC_AR_MODE_ID,1 |
| jno .Lesa1 |
| la %r8,LC_EXT_NEW_PSW_64 # register int handler 64 bit |
| la %r9,.LextpswS1_64-.LbaseS1(%r13) |
| .Lesa1: |
| #endif |
| mvc .LoldpswS1-.LbaseS1(16,%r13),0(%r8) |
| mvc 0(16,%r8),0(%r9) |
| lhi %r6,0x0200 # cr mask for ext int (cr0.54) |
| ltr %r2,%r2 |
| jz .LsetctS1 |
| ahi %r6,0x0800 # cr mask for clock int (cr0.52) |
| stck .LtimeS1-.LbaseS1(%r13) # initiate timeout |
| al %r2,.LtimeS1-.LbaseS1(%r13) |
| st %r2,.LtimeS1-.LbaseS1(%r13) |
| sckc .LtimeS1-.LbaseS1(%r13) |
| |
| .LsetctS1: |
| stctl %c0,%c0,.LctlS1-.LbaseS1(%r13) # enable required interrupts |
| l %r0,.LctlS1-.LbaseS1(%r13) |
| lhi %r1,~(0x200 | 0x800) # clear old values |
| nr %r1,%r0 |
| or %r1,%r6 # set new value |
| st %r1,.LctlS1-.LbaseS1(%r13) |
| lctl %c0,%c0,.LctlS1-.LbaseS1(%r13) |
| st %r0,.LctlS1-.LbaseS1(%r13) |
| lhi %r2,2 # return code for timeout |
| .LloopS1: |
| lpsw .LwaitpswS1-.LbaseS1(%r13) # wait until interrupt |
| .LwaitS1: |
| lh %r7,LC_EXT_INT_CODE |
| chi %r7,0x1004 # timeout? |
| je .LtimeoutS1 |
| chi %r7,0x2401 # service int? |
| jne .LloopS1 |
| sr %r2,%r2 |
| l %r3,LC_EXT_INT_PARAM |
| .LtimeoutS1: |
| lctl %c0,%c0,.LctlS1-.LbaseS1(%r13) # restore interrupt setting |
| # restore old handler |
| mvc 0(16,%r8),.LoldpswS1-.LbaseS1(%r13) |
| lm %r6,%r15,120(%r15) # restore registers |
| br %r14 # return to caller |
| |
| .align 8 |
| .LoldpswS1: |
| .long 0, 0, 0, 0 # old ext int PSW |
| .LextpswS1: |
| .long 0x00080000, 0x80000000+.LwaitS1 # PSW to handle ext int |
| #ifdef CONFIG_64BIT |
| .LextpswS1_64: |
| .quad 0x0000000180000000, .LwaitS1 # PSW to handle ext int, 64 bit |
| #endif |
| .LwaitpswS1: |
| .long 0x010a0000, 0x00000000+.LloopS1 # PSW to wait for ext int |
| .LtimeS1: |
| .quad 0 # current time |
| .LctlS1: |
| .long 0 # CT0 contents |
| |
| # |
| # Subroutine to synchronously issue a service call. |
| # |
| # Parameters: |
| # R2 = command word |
| # R3 = sccb address |
| # |
| # Returns: |
| # R2 = 0 on success, 1 on failure |
| # R3 = sccb response code if R2 = 0 |
| # |
| |
| _sclp_servc: |
| stm %r6,%r15,24(%r15) # save registers |
| ahi %r15,-96 # create stack frame |
| lr %r6,%r2 # save command word |
| lr %r7,%r3 # save sccb address |
| .LretryS2: |
| lhi %r2,1 # error return code |
| .insn rre,0xb2200000,%r6,%r7 # servc |
| brc 1,.LendS2 # exit if not operational |
| brc 8,.LnotbusyS2 # go on if not busy |
| sr %r2,%r2 # wait until no longer busy |
| bras %r14,_sclp_wait_int |
| j .LretryS2 # retry |
| .LnotbusyS2: |
| sr %r2,%r2 # wait until result |
| bras %r14,_sclp_wait_int |
| sr %r2,%r2 |
| lh %r3,6(%r7) |
| .LendS2: |
| lm %r6,%r15,120(%r15) # restore registers |
| br %r14 |
| |
| # |
| # Subroutine to set up the SCLP interface. |
| # |
| # Parameters: |
| # R2 = 0 to activate, non-zero to deactivate |
| # |
| # Returns: |
| # R2 = 0 on success, non-zero on failure |
| # |
| |
| _sclp_setup: |
| stm %r6,%r15,24(%r15) # save registers |
| ahi %r15,-96 # create stack frame |
| basr %r13,0 # get base register |
| .LbaseS3: |
| l %r6,.LsccbS0-.LbaseS3(%r13) # prepare init mask sccb |
| mvc 0(.LinitendS3-.LinitsccbS3,%r6),.LinitsccbS3-.LbaseS3(%r13) |
| ltr %r2,%r2 # initialization? |
| jz .LdoinitS3 # go ahead |
| # clear masks |
| xc .LinitmaskS3-.LinitsccbS3(8,%r6),.LinitmaskS3-.LinitsccbS3(%r6) |
| .LdoinitS3: |
| l %r2,.LwritemaskS3-.LbaseS3(%r13)# get command word |
| lr %r3,%r6 # get sccb address |
| bras %r14,_sclp_servc # issue service call |
| ltr %r2,%r2 # servc successful? |
| jnz .LerrorS3 |
| chi %r3,0x20 # write mask successful? |
| jne .LerrorS3 |
| # check masks |
| la %r2,.LinitmaskS3-.LinitsccbS3(%r6) |
| l %r1,0(%r2) # receive mask ok? |
| n %r1,12(%r2) |
| cl %r1,0(%r2) |
| jne .LerrorS3 |
| l %r1,4(%r2) # send mask ok? |
| n %r1,8(%r2) |
| cl %r1,4(%r2) |
| sr %r2,%r2 |
| je .LendS3 |
| .LerrorS3: |
| lhi %r2,1 # error return code |
| .LendS3: |
| lm %r6,%r15,120(%r15) # restore registers |
| br %r14 |
| .LwritemaskS3: |
| .long 0x00780005 # SCLP command for write mask |
| .LinitsccbS3: |
| .word .LinitendS3-.LinitsccbS3 |
| .byte 0,0,0,0 |
| .word 0 |
| .word 0 |
| .word 4 |
| .LinitmaskS3: |
| .long 0x80000000 |
| .long 0x40000000 |
| .long 0 |
| .long 0 |
| .LinitendS3: |
| |
| # |
| # Subroutine which prints a given text to the SCLP console. |
| # |
| # Parameters: |
| # R2 = address of nil-terminated ASCII text |
| # |
| # Returns: |
| # R2 = 0 on success, 1 on failure |
| # |
| |
| _sclp_print: |
| stm %r6,%r15,24(%r15) # save registers |
| ahi %r15,-96 # create stack frame |
| basr %r13,0 # get base register |
| .LbaseS4: |
| l %r8,.LsccbS0-.LbaseS4(%r13) # prepare write data sccb |
| mvc 0(.LmtoS4-.LwritesccbS4,%r8),.LwritesccbS4-.LbaseS4(%r13) |
| la %r7,.LmtoS4-.LwritesccbS4(%r8) # current mto addr |
| sr %r0,%r0 |
| l %r10,.Lascebc-.LbaseS4(%r13) # address of translation table |
| .LinitmtoS4: |
| # initialize mto |
| mvc 0(.LmtoendS4-.LmtoS4,%r7),.LmtoS4-.LbaseS4(%r13) |
| lhi %r6,.LmtoendS4-.LmtoS4 # current mto length |
| .LloopS4: |
| ic %r0,0(%r2) # get character |
| ahi %r2,1 |
| ltr %r0,%r0 # end of string? |
| jz .LfinalizemtoS4 |
| chi %r0,0x15 # end of line (NL)? |
| jz .LfinalizemtoS4 |
| stc %r0,0(%r6,%r7) # copy to mto |
| la %r11,0(%r6,%r7) |
| tr 0(1,%r11),0(%r10) # translate to EBCDIC |
| ahi %r6,1 |
| j .LloopS4 |
| .LfinalizemtoS4: |
| sth %r6,0(%r7) # update mto length |
| lh %r9,.LmdbS4-.LwritesccbS4(%r8) # update mdb length |
| ar %r9,%r6 |
| sth %r9,.LmdbS4-.LwritesccbS4(%r8) |
| lh %r9,.LevbufS4-.LwritesccbS4(%r8)# update evbuf length |
| ar %r9,%r6 |
| sth %r9,.LevbufS4-.LwritesccbS4(%r8) |
| lh %r9,0(%r8) # update sccb length |
| ar %r9,%r6 |
| sth %r9,0(%r8) |
| ar %r7,%r6 # update current mto address |
| ltr %r0,%r0 # more characters? |
| jnz .LinitmtoS4 |
| l %r2,.LwritedataS4-.LbaseS4(%r13)# write data |
| lr %r3,%r8 |
| bras %r14,_sclp_servc |
| ltr %r2,%r2 # servc successful? |
| jnz .LendS4 |
| chi %r3,0x20 # write data successful? |
| je .LendS4 |
| lhi %r2,1 # error return code |
| .LendS4: |
| lm %r6,%r15,120(%r15) # restore registers |
| br %r14 |
| |
| # |
| # Function which prints a given text to the SCLP console. |
| # |
| # Parameters: |
| # R2 = address of nil-terminated ASCII text |
| # |
| # Returns: |
| # R2 = 0 on success, 1 on failure |
| # |
| |
| ENTRY(_sclp_print_early) |
| stm %r6,%r15,24(%r15) # save registers |
| ahi %r15,-96 # create stack frame |
| #ifdef CONFIG_64BIT |
| tm LC_AR_MODE_ID,1 |
| jno .Lesa2 |
| ahi %r15,-80 |
| stmh %r6,%r15,96(%r15) # store upper register halves |
| .Lesa2: |
| #endif |
| lr %r10,%r2 # save string pointer |
| lhi %r2,0 |
| bras %r14,_sclp_setup # enable console |
| ltr %r2,%r2 |
| jnz .LendS5 |
| lr %r2,%r10 |
| bras %r14,_sclp_print # print string |
| ltr %r2,%r2 |
| jnz .LendS5 |
| lhi %r2,1 |
| bras %r14,_sclp_setup # disable console |
| .LendS5: |
| #ifdef CONFIG_64BIT |
| tm LC_AR_MODE_ID,1 |
| jno .Lesa3 |
| lmh %r6,%r15,96(%r15) # store upper register halves |
| ahi %r15,80 |
| .Lesa3: |
| #endif |
| lm %r6,%r15,120(%r15) # restore registers |
| br %r14 |
| |
| .LwritedataS4: |
| .long 0x00760005 # SCLP command for write data |
| .LwritesccbS4: |
| # sccb |
| .word .LmtoS4-.LwritesccbS4 |
| .byte 0 |
| .byte 0,0,0 |
| .word 0 |
| |
| # evbuf |
| .LevbufS4: |
| .word .LmtoS4-.LevbufS4 |
| .byte 0x02 |
| .byte 0 |
| .word 0 |
| |
| .LmdbS4: |
| # mdb |
| .word .LmtoS4-.LmdbS4 |
| .word 1 |
| .long 0xd4c4c240 |
| .long 1 |
| |
| # go |
| .LgoS4: |
| .word .LmtoS4-.LgoS4 |
| .word 1 |
| .long 0 |
| .byte 0,0,0,0,0,0,0,0 |
| .byte 0,0,0 |
| .byte 0 |
| .byte 0,0,0,0,0,0,0 |
| .byte 0 |
| .word 0 |
| .byte 0,0,0,0,0,0,0,0,0,0 |
| .byte 0,0,0,0,0,0,0,0 |
| .byte 0,0,0,0,0,0,0,0 |
| |
| .LmtoS4: |
| .word .LmtoendS4-.LmtoS4 |
| .word 4 |
| .word 0x1000 |
| .byte 0 |
| .byte 0,0,0 |
| .LmtoendS4: |
| |
| # Global constants |
| .LsccbS0: |
| .long _sclp_work_area |
| .Lascebc: |
| .long _ascebc |
| |
| .section .data,"aw",@progbits |
| .balign 4096 |
| _sclp_work_area: |
| .fill 4096 |
| .previous |
