| /* |
| * Address map functions for Marvell 370 / XP SoCs |
| * |
| * Copyright (C) 2012 Marvell |
| * |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/mbus.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <plat/addr-map.h> |
| |
| /* |
| * Generic Address Decode Windows bit settings |
| */ |
| #define ARMADA_XP_TARGET_DEV_BUS 1 |
| #define ARMADA_XP_ATTR_DEV_BOOTROM 0x1D |
| #define ARMADA_XP_TARGET_ETH1 3 |
| #define ARMADA_XP_TARGET_PCIE_0_2 4 |
| #define ARMADA_XP_TARGET_ETH0 7 |
| #define ARMADA_XP_TARGET_PCIE_1_3 8 |
| |
| #define ARMADA_370_TARGET_DEV_BUS 1 |
| #define ARMADA_370_ATTR_DEV_BOOTROM 0x1D |
| #define ARMADA_370_TARGET_PCIE_0 4 |
| #define ARMADA_370_TARGET_PCIE_1 8 |
| |
| #define ARMADA_WINDOW_8_PLUS_OFFSET 0x90 |
| #define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180 |
| |
| static const struct __initdata orion_addr_map_info |
| armada_xp_addr_map_info[] = { |
| /* |
| * Window for the BootROM, needed for SMP on Armada XP |
| */ |
| { 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS, |
| ARMADA_XP_ATTR_DEV_BOOTROM, -1 }, |
| /* End marker */ |
| { -1, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static const struct __initdata orion_addr_map_info |
| armada_370_addr_map_info[] = { |
| /* End marker */ |
| { -1, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct of_device_id of_addr_decoding_controller_table[] = { |
| { .compatible = "marvell,armada-addr-decoding-controller" }, |
| { /* end of list */ }, |
| }; |
| |
| static void __iomem * |
| armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win) |
| { |
| unsigned int offset; |
| |
| /* The register layout is a bit annoying and the below code |
| * tries to cope with it. |
| * - At offset 0x0, there are the registers for the first 8 |
| * windows, with 4 registers of 32 bits per window (ctrl, |
| * base, remap low, remap high) |
| * - Then at offset 0x80, there is a hole of 0x10 bytes for |
| * the internal registers base address and internal units |
| * sync barrier register. |
| * - Then at offset 0x90, there the registers for 12 |
| * windows, with only 2 registers of 32 bits per window |
| * (ctrl, base). |
| */ |
| if (win < 8) |
| offset = (win << 4); |
| else |
| offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3); |
| |
| return cfg->bridge_virt_base + offset; |
| } |
| |
| static struct __initdata orion_addr_map_cfg addr_map_cfg = { |
| .num_wins = 20, |
| .remappable_wins = 8, |
| .win_cfg_base = armada_cfg_base, |
| }; |
| |
| static int __init armada_setup_cpu_mbus(void) |
| { |
| struct device_node *np; |
| void __iomem *mbus_unit_addr_decoding_base; |
| void __iomem *sdram_addr_decoding_base; |
| |
| np = of_find_matching_node(NULL, of_addr_decoding_controller_table); |
| if (!np) |
| return -ENODEV; |
| |
| mbus_unit_addr_decoding_base = of_iomap(np, 0); |
| BUG_ON(!mbus_unit_addr_decoding_base); |
| |
| sdram_addr_decoding_base = |
| mbus_unit_addr_decoding_base + |
| ARMADA_SDRAM_ADDR_DECODING_OFFSET; |
| |
| addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base; |
| |
| /* |
| * Disable, clear and configure windows. |
| */ |
| if (of_machine_is_compatible("marvell,armadaxp")) |
| orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info); |
| else if (of_machine_is_compatible("marvell,armada370")) |
| orion_config_wins(&addr_map_cfg, armada_370_addr_map_info); |
| else { |
| pr_err("Unsupported SoC\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Setup MBUS dram target info. |
| */ |
| orion_setup_cpu_mbus_target(&addr_map_cfg, |
| sdram_addr_decoding_base); |
| return 0; |
| } |
| |
| /* Using a early_initcall is needed so that this initialization gets |
| * done before the SMP initialization, which requires the BootROM to |
| * be remapped. */ |
| early_initcall(armada_setup_cpu_mbus); |