blob: f3990b04fecf4661216c9cf321dc817c72e1a0b7 [file] [log] [blame]
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
};
};
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
clocks = <&clks 106>;
};
gpmi-nand@00112000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <0 13 0x04>, <0 15 0x04>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 152>, <&clks 153>, <&clks 151>,
<&clks 150>, <&clks 149>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
fsl,gpmi-dma-channel = <0>;
status = "disabled";
};
timer@00a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
};
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 0x04>;
cache-unified;
cache-level = <2>;
};
aips-bus@02000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
spdif@02004000 {
reg = <0x02004000 0x4000>;
interrupts = <0 52 0x04>;
};
ecspi@02008000 { /* eCSPI1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 0x04>;
clocks = <&clks 112>, <&clks 112>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi@0200c000 { /* eCSPI2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 0x04>;
clocks = <&clks 113>, <&clks 113>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi@02010000 { /* eCSPI3 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 0x04>;
clocks = <&clks 114>, <&clks 114>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi@02014000 { /* eCSPI4 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 0x04>;
clocks = <&clks 115>, <&clks 115>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi@02018000 { /* eCSPI5 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 0x04>;
clocks = <&clks 116>, <&clks 116>;
clock-names = "ipg", "per";
status = "disabled";
};
uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
status = "disabled";
};
esai@02024000 {
reg = <0x02024000 0x4000>;
interrupts = <0 51 0x04>;
};
ssi1: ssi@02028000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
clocks = <&clks 178>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
status = "disabled";
};
ssi2: ssi@0202c000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
clocks = <&clks 179>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
status = "disabled";
};
ssi3: ssi@02030000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
clocks = <&clks 180>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
status = "disabled";
};
asrc@02034000 {
reg = <0x02034000 0x4000>;
interrupts = <0 50 0x04>;
};
spba@0203c000 {
reg = <0x0203c000 0x4000>;
};
};
vpu@02040000 {
reg = <0x02040000 0x3c000>;
interrupts = <0 3 0x04 0 12 0x04>;
};
aipstz@0207c000 { /* AIPSTZ1 */
reg = <0x0207c000 0x4000>;
};
pwm@02080000 { /* PWM1 */
reg = <0x02080000 0x4000>;
interrupts = <0 83 0x04>;
};
pwm@02084000 { /* PWM2 */
reg = <0x02084000 0x4000>;
interrupts = <0 84 0x04>;
};
pwm@02088000 { /* PWM3 */
reg = <0x02088000 0x4000>;
interrupts = <0 85 0x04>;
};
pwm@0208c000 { /* PWM4 */
reg = <0x0208c000 0x4000>;
interrupts = <0 86 0x04>;
};
flexcan@02090000 { /* CAN1 */
reg = <0x02090000 0x4000>;
interrupts = <0 110 0x04>;
};
flexcan@02094000 { /* CAN2 */
reg = <0x02094000 0x4000>;
interrupts = <0 111 0x04>;
};
gpt@02098000 {
compatible = "fsl,imx6q-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 0x04>;
};
gpio1: gpio@0209c000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 0x04 0 67 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@020a0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 0x04 0 69 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@020a4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 0x04 0 71 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@020a8000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 0x04 0 73 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@020ac000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 0x04 0 75 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@020b0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <0 76 0x04 0 77 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio@020b4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b4000 0x4000>;
interrupts = <0 78 0x04 0 79 0x04>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
kpp@020b8000 {
reg = <0x020b8000 0x4000>;
interrupts = <0 82 0x04>;
};
wdog@020bc000 { /* WDOG1 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
clocks = <&clks 0>;
};
wdog@020c0000 { /* WDOG2 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 0x04>;
clocks = <&clks 0>;
status = "disabled";
};
clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
#clock-cells = <1>;
};
anatop: anatop@020c8000 {
compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1375000>;
regulator-always-on;
anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
};
regulator-3p0@120 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
};
regulator-2p5@130 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2750000>;
regulator-always-on;
anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2000000>;
anatop-max-voltage = <2750000>;
};
regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <0>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
regulator-vddpu@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
regulator-vddsoc@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <18>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
};
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
clocks = <&clks 182>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
clocks = <&clks 183>;
};
snvs@020cc000 {
reg = <0x020cc000 0x4000>;
interrupts = <0 19 0x04 0 20 0x04>;
};
epit@020d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
interrupts = <0 56 0x04>;
};
epit@020d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
interrupts = <0 57 0x04>;
};
src@020d8000 {
compatible = "fsl,imx6q-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 0x04 0 96 0x04>;
};
gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 0x04 0 90 0x04>;
};
gpr: iomuxc-gpr@020e0000 {
compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e0000 0x38>;
};
iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
/* shared pinctrl settings */
audmux {
pinctrl_audmux_1: audmux-1 {
fsl,pins = <
18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
>;
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
>;
};
};
enet {
pinctrl_enet_1: enetgrp-1 {
fsl,pins = <
695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */
24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
>;
};
pinctrl_enet_2: enetgrp-2 {
fsl,pins = <
890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */
909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */
24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
>;
};
};
gpmi-nand {
pinctrl_gpmi_nand_1: gpmi-nand-1 {
fsl,pins = <
1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
>;
};
};
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <
137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */
>;
};
};
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
>;
};
};
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */
>;
};
};
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */
885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */
>;
};
};
usbotg {
pinctrl_usbotg_1: usbotggrp-1 {
fsl,pins = <
1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
>;
};
};
usdhc2 {
pinctrl_usdhc2_1: usdhc2grp-1 {
fsl,pins = <
1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
>;
};
};
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
fsl,pins = <
1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
>;
};
pinctrl_usdhc3_2: usdhc3grp-2 {
fsl,pins = <
1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
>;
};
};
usdhc4 {
pinctrl_usdhc4_1: usdhc4grp-1 {
fsl,pins = <
1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
>;
};
pinctrl_usdhc4_2: usdhc4grp-2 {
fsl,pins = <
1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
>;
};
};
};
dcic@020e4000 { /* DCIC1 */
reg = <0x020e4000 0x4000>;
interrupts = <0 124 0x04>;
};
dcic@020e8000 { /* DCIC2 */
reg = <0x020e8000 0x4000>;
interrupts = <0 125 0x04>;
};
sdma@020ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 0x04>;
clocks = <&clks 155>, <&clks 155>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
};
};
aips-bus@02100000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
caam@02100000 {
reg = <0x02100000 0x40000>;
interrupts = <0 105 0x04 0 106 0x04>;
};
aipstz@0217c000 { /* AIPSTZ2 */
reg = <0x0217c000 0x4000>;
};
usb@02184000 { /* USB OTG */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
clocks = <&clks 162>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
usb@02184200 { /* USB1 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 0x04>;
clocks = <&clks 162>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
usb@02184400 { /* USB2 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 0x04>;
clocks = <&clks 162>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
usb@02184600 { /* USB3 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 0x04>;
clocks = <&clks 162>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
usbmisc: usbmisc@02184800 {
#index-cells = <1>;
compatible = "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks 162>;
};
ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
clocks = <&clks 117>, <&clks 117>;
clock-names = "ipg", "ahb";
status = "disabled";
};
mlb@0218c000 {
reg = <0x0218c000 0x4000>;
interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
};
usdhc@02190000 { /* uSDHC1 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 0x04>;
clocks = <&clks 163>, <&clks 163>, <&clks 163>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
usdhc@02194000 { /* uSDHC2 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 0x04>;
clocks = <&clks 164>, <&clks 164>, <&clks 164>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
usdhc@02198000 { /* uSDHC3 */
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 0x04>;
clocks = <&clks 165>, <&clks 165>, <&clks 165>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
usdhc@0219c000 { /* uSDHC4 */
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 0x04>;
clocks = <&clks 166>, <&clks 166>, <&clks 166>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
i2c@021a0000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 0x04>;
clocks = <&clks 125>;
status = "disabled";
};
i2c@021a4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 0x04>;
clocks = <&clks 126>;
status = "disabled";
};
i2c@021a8000 { /* I2C3 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 0x04>;
clocks = <&clks 127>;
status = "disabled";
};
romcp@021ac000 {
reg = <0x021ac000 0x4000>;
};
mmdc@021b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
mmdc@021b4000 { /* MMDC1 */
reg = <0x021b4000 0x4000>;
};
weim@021b8000 {
reg = <0x021b8000 0x4000>;
interrupts = <0 14 0x04>;
};
ocotp@021bc000 {
reg = <0x021bc000 0x4000>;
};
ocotp@021c0000 {
reg = <0x021c0000 0x4000>;
interrupts = <0 21 0x04>;
};
tzasc@021d0000 { /* TZASC1 */
reg = <0x021d0000 0x4000>;
interrupts = <0 108 0x04>;
};
tzasc@021d4000 { /* TZASC2 */
reg = <0x021d4000 0x4000>;
interrupts = <0 109 0x04>;
};
audmux@021d8000 {
compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
mipi@021dc000 { /* MIPI-CSI */
reg = <0x021dc000 0x4000>;
};
mipi@021e0000 { /* MIPI-DSI */
reg = <0x021e0000 0x4000>;
};
vdoa@021e4000 {
reg = <0x021e4000 0x4000>;
interrupts = <0 18 0x04>;
};
uart2: serial@021e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
status = "disabled";
};
uart3: serial@021ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
status = "disabled";
};
uart4: serial@021f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
status = "disabled";
};
uart5: serial@021f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
status = "disabled";
};
};
};
};