| /* |
| * linux/arch/arm/mach-realview/realview_pb11mp.c |
| * |
| * Copyright (C) 2008 ARM Limited |
| * Copyright (C) 2000 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/sysdev.h> |
| #include <linux/amba/bus.h> |
| #include <linux/amba/pl061.h> |
| #include <linux/amba/mmci.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/leds.h> |
| #include <asm/mach-types.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/hardware/icst307.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/localtimer.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/flash.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| |
| #include <mach/board-pb11mp.h> |
| #include <mach/irqs.h> |
| |
| #include "core.h" |
| #include "clock.h" |
| |
| static struct map_desc realview_pb11mp_io_desc[] __initdata = { |
| { |
| .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_TC11MP_L220_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_TC11MP_L220_BASE), |
| .length = SZ_8K, |
| .type = MT_DEVICE, |
| }, |
| #ifdef CONFIG_DEBUG_LL |
| { |
| .virtual = IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| #endif |
| }; |
| |
| static void __init realview_pb11mp_map_io(void) |
| { |
| iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc)); |
| } |
| |
| static struct pl061_platform_data gpio0_plat_data = { |
| .gpio_base = 0, |
| .irq_base = -1, |
| }; |
| |
| static struct pl061_platform_data gpio1_plat_data = { |
| .gpio_base = 8, |
| .irq_base = -1, |
| }; |
| |
| static struct pl061_platform_data gpio2_plat_data = { |
| .gpio_base = 16, |
| .irq_base = -1, |
| }; |
| |
| /* |
| * RealView PB11MPCore AMBA devices |
| */ |
| |
| #define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } |
| #define GPIO2_DMA { 0, 0 } |
| #define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } |
| #define GPIO3_DMA { 0, 0 } |
| #define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } |
| #define AACI_DMA { 0x80, 0x81 } |
| #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } |
| #define MMCI0_DMA { 0x84, 0 } |
| #define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } |
| #define KMI0_DMA { 0, 0 } |
| #define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } |
| #define KMI1_DMA { 0, 0 } |
| #define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } |
| #define PB11MP_SMC_DMA { 0, 0 } |
| #define MPMC_IRQ { NO_IRQ, NO_IRQ } |
| #define MPMC_DMA { 0, 0 } |
| #define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } |
| #define PB11MP_CLCD_DMA { 0, 0 } |
| #define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } |
| #define DMAC_DMA { 0, 0 } |
| #define SCTL_IRQ { NO_IRQ, NO_IRQ } |
| #define SCTL_DMA { 0, 0 } |
| #define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } |
| #define PB11MP_WATCHDOG_DMA { 0, 0 } |
| #define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } |
| #define PB11MP_GPIO0_DMA { 0, 0 } |
| #define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } |
| #define GPIO1_DMA { 0, 0 } |
| #define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } |
| #define PB11MP_RTC_DMA { 0, 0 } |
| #define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } |
| #define SCI_DMA { 7, 6 } |
| #define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } |
| #define PB11MP_UART0_DMA { 15, 14 } |
| #define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } |
| #define PB11MP_UART1_DMA { 13, 12 } |
| #define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } |
| #define PB11MP_UART2_DMA { 11, 10 } |
| #define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } |
| #define PB11MP_UART3_DMA { 0x86, 0x87 } |
| #define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } |
| #define PB11MP_SSP_DMA { 9, 8 } |
| |
| /* FPGA Primecells */ |
| AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); |
| |
| /* DevChip Primecells */ |
| AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); |
| AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); |
| AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); |
| AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); |
| AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); |
| AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); |
| AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); |
| AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, NULL); |
| |
| /* Primecells on the NEC ISSP chip */ |
| AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); |
| AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); |
| |
| static struct amba_device *amba_devs[] __initdata = { |
| &dmac_device, |
| &uart0_device, |
| &uart1_device, |
| &uart2_device, |
| &uart3_device, |
| &smc_device, |
| &clcd_device, |
| &sctl_device, |
| &wdog_device, |
| &gpio0_device, |
| &gpio1_device, |
| &gpio2_device, |
| &rtc_device, |
| &sci0_device, |
| &ssp0_device, |
| &aaci_device, |
| &mmc0_device, |
| &kmi0_device, |
| &kmi1_device, |
| }; |
| |
| /* |
| * RealView PB11MPCore platform devices |
| */ |
| static struct resource realview_pb11mp_flash_resource[] = { |
| [0] = { |
| .start = REALVIEW_PB11MP_FLASH0_BASE, |
| .end = REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = REALVIEW_PB11MP_FLASH1_BASE, |
| .end = REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct resource realview_pb11mp_smsc911x_resources[] = { |
| [0] = { |
| .start = REALVIEW_PB11MP_ETH_BASE, |
| .end = REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_TC11MP_ETH, |
| .end = IRQ_TC11MP_ETH, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource realview_pb11mp_isp1761_resources[] = { |
| [0] = { |
| .start = REALVIEW_PB11MP_USB_BASE, |
| .end = REALVIEW_PB11MP_USB_BASE + SZ_128K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_TC11MP_USB, |
| .end = IRQ_TC11MP_USB, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static void __init gic_init_irq(void) |
| { |
| unsigned int pldctrl; |
| |
| /* new irq mode with no DCC */ |
| writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); |
| pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); |
| pldctrl |= 2 << 22; |
| writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); |
| writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); |
| |
| /* ARM11MPCore test chip GIC, primary */ |
| gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE); |
| gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29); |
| gic_cpu_init(0, gic_cpu_base_addr); |
| |
| /* board GIC, secondary */ |
| gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START); |
| gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE)); |
| gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1); |
| } |
| |
| static void __init realview_pb11mp_timer_init(void) |
| { |
| timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE); |
| timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20; |
| timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE); |
| timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; |
| |
| #ifdef CONFIG_LOCAL_TIMERS |
| twd_base = __io_address(REALVIEW_TC11MP_TWD_BASE); |
| #endif |
| realview_timer_init(IRQ_TC11MP_TIMER0_1); |
| } |
| |
| static struct sys_timer realview_pb11mp_timer = { |
| .init = realview_pb11mp_timer_init, |
| }; |
| |
| static void realview_pb11mp_reset(char mode) |
| { |
| void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + |
| REALVIEW_SYS_RESETCTL_OFFSET; |
| unsigned int val; |
| |
| /* |
| * To reset, we hit the on-board reset register |
| * in the system FPGA |
| */ |
| val = __raw_readl(hdr_ctrl); |
| val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR; |
| __raw_writel(val, hdr_ctrl); |
| } |
| |
| static void __init realview_pb11mp_init(void) |
| { |
| int i; |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled |
| * Bits: .... ...0 0111 1001 0000 .... .... .... */ |
| l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); |
| #endif |
| |
| realview_flash_register(realview_pb11mp_flash_resource, |
| ARRAY_SIZE(realview_pb11mp_flash_resource)); |
| realview_eth_register(NULL, realview_pb11mp_smsc911x_resources); |
| platform_device_register(&realview_i2c_device); |
| platform_device_register(&realview_cf_device); |
| realview_usb_register(realview_pb11mp_isp1761_resources); |
| |
| for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { |
| struct amba_device *d = amba_devs[i]; |
| amba_device_register(d, &iomem_resource); |
| } |
| |
| #ifdef CONFIG_LEDS |
| leds_event = realview_leds_event; |
| #endif |
| realview_reset = realview_pb11mp_reset; |
| } |
| |
| MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") |
| /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ |
| .phys_io = REALVIEW_PB11MP_UART0_BASE, |
| .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, |
| .boot_params = PHYS_OFFSET + 0x00000100, |
| .fixup = realview_fixup, |
| .map_io = realview_pb11mp_map_io, |
| .init_irq = gic_init_irq, |
| .timer = &realview_pb11mp_timer, |
| .init_machine = realview_pb11mp_init, |
| MACHINE_END |