| /* |
| * arch/sh/boards/dreamcast/irq.c |
| * |
| * Holly IRQ support for the Sega Dreamcast. |
| * |
| * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org> |
| * |
| * This file is part of the LinuxDC project (www.linuxdc.org) |
| * Released under the terms of the GNU GPL v2.0 |
| */ |
| |
| #include <linux/irq.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/dreamcast/sysasic.h> |
| |
| /* Dreamcast System ASIC Hardware Events - |
| |
| The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving |
| hardware events from system peripherals and triggering an SH7750 IRQ. |
| Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are |
| set in the Event Mask Registers (EMRs). When a hardware event is |
| triggered, it's corresponding bit in the Event Status Registers (ESRs) |
| is set, and that bit should be rewritten to the ESR to acknowledge that |
| event. |
| |
| There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event |
| types can be found in include/asm-sh/dreamcast/sysasic.h. There are three |
| groups of EMRs that parallel the ESRs. Each EMR group corresponds to an |
| IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 |
| triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9. |
| |
| In the kernel, these events are mapped to virtual IRQs so that drivers can |
| respond to them as they would a normal interrupt. In order to keep this |
| mapping simple, the events are mapped as: |
| |
| 6900/6910 - Events 0-31, IRQ 13 |
| 6904/6924 - Events 32-63, IRQ 11 |
| 6908/6938 - Events 64-95, IRQ 9 |
| |
| */ |
| |
| #define ESR_BASE 0x005f6900 /* Base event status register */ |
| #define EMR_BASE 0x005f6910 /* Base event mask register */ |
| |
| /* Helps us determine the EMR group that this event belongs to: 0 = 0x6910, |
| 1 = 0x6920, 2 = 0x6930; also determine the event offset */ |
| #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) |
| |
| /* Return the hardware event's bit positon within the EMR/ESR */ |
| #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) |
| |
| /* For each of these *_irq routines, the IRQ passed in is the virtual IRQ |
| (logically mapped to the corresponding bit for the hardware event). */ |
| |
| /* Disable the hardware event by masking its bit in its EMR */ |
| static inline void disable_systemasic_irq(unsigned int irq) |
| { |
| unsigned long flags; |
| __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); |
| __u32 mask; |
| |
| local_irq_save(flags); |
| mask = inl(emr); |
| mask &= ~(1 << EVENT_BIT(irq)); |
| outl(mask, emr); |
| local_irq_restore(flags); |
| } |
| |
| /* Enable the hardware event by setting its bit in its EMR */ |
| static inline void enable_systemasic_irq(unsigned int irq) |
| { |
| unsigned long flags; |
| __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); |
| __u32 mask; |
| |
| local_irq_save(flags); |
| mask = inl(emr); |
| mask |= (1 << EVENT_BIT(irq)); |
| outl(mask, emr); |
| local_irq_restore(flags); |
| } |
| |
| /* Acknowledge a hardware event by writing its bit back to its ESR */ |
| static void ack_systemasic_irq(unsigned int irq) |
| { |
| __u32 esr = ESR_BASE + (LEVEL(irq) << 2); |
| disable_systemasic_irq(irq); |
| outl((1 << EVENT_BIT(irq)), esr); |
| } |
| |
| /* After a IRQ has been ack'd and responded to, it needs to be renabled */ |
| static void end_systemasic_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| enable_systemasic_irq(irq); |
| } |
| |
| static unsigned int startup_systemasic_irq(unsigned int irq) |
| { |
| enable_systemasic_irq(irq); |
| |
| return 0; |
| } |
| |
| static void shutdown_systemasic_irq(unsigned int irq) |
| { |
| disable_systemasic_irq(irq); |
| } |
| |
| struct hw_interrupt_type systemasic_int = { |
| .typename = "System ASIC", |
| .startup = startup_systemasic_irq, |
| .shutdown = shutdown_systemasic_irq, |
| .enable = enable_systemasic_irq, |
| .disable = disable_systemasic_irq, |
| .ack = ack_systemasic_irq, |
| .end = end_systemasic_irq, |
| }; |
| |
| /* |
| * Map the hardware event indicated by the processor IRQ to a virtual IRQ. |
| */ |
| int systemasic_irq_demux(int irq) |
| { |
| __u32 emr, esr, status, level; |
| __u32 j, bit; |
| |
| switch (irq) { |
| case 13: |
| level = 0; |
| break; |
| case 11: |
| level = 1; |
| break; |
| case 9: |
| level = 2; |
| break; |
| default: |
| return irq; |
| } |
| emr = EMR_BASE + (level << 4) + (level << 2); |
| esr = ESR_BASE + (level << 2); |
| |
| /* Mask the ESR to filter any spurious, unwanted interrtupts */ |
| status = inl(esr); |
| status &= inl(emr); |
| |
| /* Now scan and find the first set bit as the event to map */ |
| for (bit = 1, j = 0; j < 32; bit <<= 1, j++) { |
| if (status & bit) { |
| irq = HW_EVENT_IRQ_BASE + j + (level << 5); |
| return irq; |
| } |
| } |
| |
| /* Not reached */ |
| return irq; |
| } |