| /* |
| * drivers/usb/musb/ux500_dma.c |
| * |
| * U8500 and U5500 DMA support code |
| * |
| * Copyright (C) 2009 STMicroelectronics |
| * Copyright (C) 2011 ST-Ericsson SA |
| * Authors: |
| * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> |
| * Praveena Nadahally <praveen.nadahally@stericsson.com> |
| * Rajaram Regupathy <ragupathy.rajaram@stericsson.com> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/pfn.h> |
| #include <linux/platform_data/usb-musb-ux500.h> |
| #include "musb_core.h" |
| |
| struct ux500_dma_channel { |
| struct dma_channel channel; |
| struct ux500_dma_controller *controller; |
| struct musb_hw_ep *hw_ep; |
| struct dma_chan *dma_chan; |
| unsigned int cur_len; |
| dma_cookie_t cookie; |
| u8 ch_num; |
| u8 is_tx; |
| u8 is_allocated; |
| }; |
| |
| struct ux500_dma_controller { |
| struct dma_controller controller; |
| struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS]; |
| struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS]; |
| u32 num_rx_channels; |
| u32 num_tx_channels; |
| void *private_data; |
| dma_addr_t phy_base; |
| }; |
| |
| /* Work function invoked from DMA callback to handle rx transfers. */ |
| void ux500_dma_callback(void *private_data) |
| { |
| struct dma_channel *channel = private_data; |
| struct ux500_dma_channel *ux500_channel = channel->private_data; |
| struct musb_hw_ep *hw_ep = ux500_channel->hw_ep; |
| struct musb *musb = hw_ep->musb; |
| unsigned long flags; |
| |
| dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n", |
| hw_ep->epnum); |
| |
| spin_lock_irqsave(&musb->lock, flags); |
| ux500_channel->channel.actual_len = ux500_channel->cur_len; |
| ux500_channel->channel.status = MUSB_DMA_STATUS_FREE; |
| musb_dma_completion(musb, hw_ep->epnum, |
| ux500_channel->is_tx); |
| spin_unlock_irqrestore(&musb->lock, flags); |
| |
| } |
| |
| static bool ux500_configure_channel(struct dma_channel *channel, |
| u16 packet_sz, u8 mode, |
| dma_addr_t dma_addr, u32 len) |
| { |
| struct ux500_dma_channel *ux500_channel = channel->private_data; |
| struct musb_hw_ep *hw_ep = ux500_channel->hw_ep; |
| struct dma_chan *dma_chan = ux500_channel->dma_chan; |
| struct dma_async_tx_descriptor *dma_desc; |
| enum dma_transfer_direction direction; |
| struct scatterlist sg; |
| struct dma_slave_config slave_conf; |
| enum dma_slave_buswidth addr_width; |
| dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) + |
| ux500_channel->controller->phy_base); |
| struct musb *musb = ux500_channel->controller->private_data; |
| |
| dev_dbg(musb->controller, |
| "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", |
| packet_sz, mode, dma_addr, len, ux500_channel->is_tx); |
| |
| ux500_channel->cur_len = len; |
| |
| sg_init_table(&sg, 1); |
| sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_addr)), len, |
| offset_in_page(dma_addr)); |
| sg_dma_address(&sg) = dma_addr; |
| sg_dma_len(&sg) = len; |
| |
| direction = ux500_channel->is_tx ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; |
| addr_width = (len & 0x3) ? DMA_SLAVE_BUSWIDTH_1_BYTE : |
| DMA_SLAVE_BUSWIDTH_4_BYTES; |
| |
| slave_conf.direction = direction; |
| slave_conf.src_addr = usb_fifo_addr; |
| slave_conf.src_addr_width = addr_width; |
| slave_conf.src_maxburst = 16; |
| slave_conf.dst_addr = usb_fifo_addr; |
| slave_conf.dst_addr_width = addr_width; |
| slave_conf.dst_maxburst = 16; |
| slave_conf.device_fc = false; |
| |
| dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, |
| (unsigned long) &slave_conf); |
| |
| dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| if (!dma_desc) |
| return false; |
| |
| dma_desc->callback = ux500_dma_callback; |
| dma_desc->callback_param = channel; |
| ux500_channel->cookie = dma_desc->tx_submit(dma_desc); |
| |
| dma_async_issue_pending(dma_chan); |
| |
| return true; |
| } |
| |
| static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, |
| struct musb_hw_ep *hw_ep, u8 is_tx) |
| { |
| struct ux500_dma_controller *controller = container_of(c, |
| struct ux500_dma_controller, controller); |
| struct ux500_dma_channel *ux500_channel = NULL; |
| struct musb *musb = controller->private_data; |
| u8 ch_num = hw_ep->epnum - 1; |
| u32 max_ch; |
| |
| /* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated |
| * to specified hw_ep. For example DMA channel 0 can only be allocated |
| * to hw_ep 1 and 9. |
| */ |
| if (ch_num > 7) |
| ch_num -= 8; |
| |
| max_ch = is_tx ? controller->num_tx_channels : |
| controller->num_rx_channels; |
| |
| if (ch_num >= max_ch) |
| return NULL; |
| |
| ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) : |
| &(controller->rx_channel[ch_num]) ; |
| |
| /* Check if channel is already used. */ |
| if (ux500_channel->is_allocated) |
| return NULL; |
| |
| ux500_channel->hw_ep = hw_ep; |
| ux500_channel->is_allocated = 1; |
| |
| dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n", |
| hw_ep->epnum, is_tx, ch_num); |
| |
| return &(ux500_channel->channel); |
| } |
| |
| static void ux500_dma_channel_release(struct dma_channel *channel) |
| { |
| struct ux500_dma_channel *ux500_channel = channel->private_data; |
| struct musb *musb = ux500_channel->controller->private_data; |
| |
| dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num); |
| |
| if (ux500_channel->is_allocated) { |
| ux500_channel->is_allocated = 0; |
| channel->status = MUSB_DMA_STATUS_FREE; |
| channel->actual_len = 0; |
| } |
| } |
| |
| static int ux500_dma_is_compatible(struct dma_channel *channel, |
| u16 maxpacket, void *buf, u32 length) |
| { |
| if ((maxpacket & 0x3) || |
| ((int)buf & 0x3) || |
| (length < 512) || |
| (length & 0x3)) |
| return false; |
| else |
| return true; |
| } |
| |
| static int ux500_dma_channel_program(struct dma_channel *channel, |
| u16 packet_sz, u8 mode, |
| dma_addr_t dma_addr, u32 len) |
| { |
| int ret; |
| |
| BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || |
| channel->status == MUSB_DMA_STATUS_BUSY); |
| |
| if (!ux500_dma_is_compatible(channel, packet_sz, (void *)dma_addr, len)) |
| return false; |
| |
| channel->status = MUSB_DMA_STATUS_BUSY; |
| channel->actual_len = 0; |
| ret = ux500_configure_channel(channel, packet_sz, mode, dma_addr, len); |
| if (!ret) |
| channel->status = MUSB_DMA_STATUS_FREE; |
| |
| return ret; |
| } |
| |
| static int ux500_dma_channel_abort(struct dma_channel *channel) |
| { |
| struct ux500_dma_channel *ux500_channel = channel->private_data; |
| struct ux500_dma_controller *controller = ux500_channel->controller; |
| struct musb *musb = controller->private_data; |
| void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs; |
| u16 csr; |
| |
| dev_dbg(musb->controller, "channel=%d, is_tx=%d\n", |
| ux500_channel->ch_num, ux500_channel->is_tx); |
| |
| if (channel->status == MUSB_DMA_STATUS_BUSY) { |
| if (ux500_channel->is_tx) { |
| csr = musb_readw(epio, MUSB_TXCSR); |
| csr &= ~(MUSB_TXCSR_AUTOSET | |
| MUSB_TXCSR_DMAENAB | |
| MUSB_TXCSR_DMAMODE); |
| musb_writew(epio, MUSB_TXCSR, csr); |
| } else { |
| csr = musb_readw(epio, MUSB_RXCSR); |
| csr &= ~(MUSB_RXCSR_AUTOCLEAR | |
| MUSB_RXCSR_DMAENAB | |
| MUSB_RXCSR_DMAMODE); |
| musb_writew(epio, MUSB_RXCSR, csr); |
| } |
| |
| ux500_channel->dma_chan->device-> |
| device_control(ux500_channel->dma_chan, |
| DMA_TERMINATE_ALL, 0); |
| channel->status = MUSB_DMA_STATUS_FREE; |
| } |
| return 0; |
| } |
| |
| static int ux500_dma_controller_stop(struct dma_controller *c) |
| { |
| struct ux500_dma_controller *controller = container_of(c, |
| struct ux500_dma_controller, controller); |
| struct ux500_dma_channel *ux500_channel; |
| struct dma_channel *channel; |
| u8 ch_num; |
| |
| for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) { |
| channel = &controller->rx_channel[ch_num].channel; |
| ux500_channel = channel->private_data; |
| |
| ux500_dma_channel_release(channel); |
| |
| if (ux500_channel->dma_chan) |
| dma_release_channel(ux500_channel->dma_chan); |
| } |
| |
| for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) { |
| channel = &controller->tx_channel[ch_num].channel; |
| ux500_channel = channel->private_data; |
| |
| ux500_dma_channel_release(channel); |
| |
| if (ux500_channel->dma_chan) |
| dma_release_channel(ux500_channel->dma_chan); |
| } |
| |
| return 0; |
| } |
| |
| static int ux500_dma_controller_start(struct dma_controller *c) |
| { |
| struct ux500_dma_controller *controller = container_of(c, |
| struct ux500_dma_controller, controller); |
| struct ux500_dma_channel *ux500_channel = NULL; |
| struct musb *musb = controller->private_data; |
| struct device *dev = musb->controller; |
| struct musb_hdrc_platform_data *plat = dev->platform_data; |
| struct ux500_musb_board_data *data = plat->board_data; |
| struct dma_channel *dma_channel = NULL; |
| u32 ch_num; |
| u8 dir; |
| u8 is_tx = 0; |
| |
| void **param_array; |
| struct ux500_dma_channel *channel_array; |
| u32 ch_count; |
| dma_cap_mask_t mask; |
| |
| if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) || |
| (data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS)) |
| return -EINVAL; |
| |
| controller->num_rx_channels = data->num_rx_channels; |
| controller->num_tx_channels = data->num_tx_channels; |
| |
| dma_cap_zero(mask); |
| dma_cap_set(DMA_SLAVE, mask); |
| |
| /* Prepare the loop for RX channels */ |
| channel_array = controller->rx_channel; |
| ch_count = data->num_rx_channels; |
| param_array = data->dma_rx_param_array; |
| |
| for (dir = 0; dir < 2; dir++) { |
| for (ch_num = 0; ch_num < ch_count; ch_num++) { |
| ux500_channel = &channel_array[ch_num]; |
| ux500_channel->controller = controller; |
| ux500_channel->ch_num = ch_num; |
| ux500_channel->is_tx = is_tx; |
| |
| dma_channel = &(ux500_channel->channel); |
| dma_channel->private_data = ux500_channel; |
| dma_channel->status = MUSB_DMA_STATUS_FREE; |
| dma_channel->max_len = SZ_16M; |
| |
| ux500_channel->dma_chan = dma_request_channel(mask, |
| data->dma_filter, |
| param_array[ch_num]); |
| if (!ux500_channel->dma_chan) { |
| ERR("Dma pipe allocation error dir=%d ch=%d\n", |
| dir, ch_num); |
| |
| /* Release already allocated channels */ |
| ux500_dma_controller_stop(c); |
| |
| return -EBUSY; |
| } |
| |
| } |
| |
| /* Prepare the loop for TX channels */ |
| channel_array = controller->tx_channel; |
| ch_count = data->num_tx_channels; |
| param_array = data->dma_tx_param_array; |
| is_tx = 1; |
| } |
| |
| return 0; |
| } |
| |
| void dma_controller_destroy(struct dma_controller *c) |
| { |
| struct ux500_dma_controller *controller = container_of(c, |
| struct ux500_dma_controller, controller); |
| |
| kfree(controller); |
| } |
| |
| struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) |
| { |
| struct ux500_dma_controller *controller; |
| struct platform_device *pdev = to_platform_device(musb->controller); |
| struct resource *iomem; |
| |
| controller = kzalloc(sizeof(*controller), GFP_KERNEL); |
| if (!controller) |
| return NULL; |
| |
| controller->private_data = musb; |
| |
| /* Save physical address for DMA controller. */ |
| iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| controller->phy_base = (dma_addr_t) iomem->start; |
| |
| controller->controller.start = ux500_dma_controller_start; |
| controller->controller.stop = ux500_dma_controller_stop; |
| controller->controller.channel_alloc = ux500_dma_channel_allocate; |
| controller->controller.channel_release = ux500_dma_channel_release; |
| controller->controller.channel_program = ux500_dma_channel_program; |
| controller->controller.channel_abort = ux500_dma_channel_abort; |
| controller->controller.is_compatible = ux500_dma_is_compatible; |
| |
| return &controller->controller; |
| } |