| \# |
| # RTC class/drivers configuration |
| # |
| |
| menu "Real Time Clock" |
| |
| config RTC_LIB |
| tristate |
| |
| config RTC_CLASS |
| tristate "RTC class" |
| depends on EXPERIMENTAL |
| default n |
| select RTC_LIB |
| help |
| Generic RTC class support. If you say yes here, you will |
| be allowed to plug one or more RTCs to your system. You will |
| probably want to enable one or more of the interfaces below. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-class. |
| |
| config RTC_HCTOSYS |
| bool "Set system time from RTC on startup" |
| depends on RTC_CLASS = y |
| default y |
| help |
| If you say yes here, the system time will be set using |
| the value read from the specified RTC device. This is useful |
| in order to avoid unnecessary fschk runs. |
| |
| config RTC_HCTOSYS_DEVICE |
| string "The RTC to read the time from" |
| depends on RTC_HCTOSYS = y |
| default "rtc0" |
| help |
| The RTC device that will be used as the source for |
| the system time, usually rtc0. |
| |
| comment "RTC interfaces" |
| depends on RTC_CLASS |
| |
| config RTC_INTF_SYSFS |
| tristate "sysfs" |
| depends on RTC_CLASS && SYSFS |
| default RTC_CLASS |
| help |
| Say yes here if you want to use your RTC using the sysfs |
| interface, /sys/class/rtc/rtcX . |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-sysfs. |
| |
| config RTC_INTF_PROC |
| tristate "proc" |
| depends on RTC_CLASS && PROC_FS |
| default RTC_CLASS |
| help |
| Say yes here if you want to use your RTC using the proc |
| interface, /proc/driver/rtc . |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-proc. |
| |
| config RTC_INTF_DEV |
| tristate "dev" |
| depends on RTC_CLASS |
| default RTC_CLASS |
| help |
| Say yes here if you want to use your RTC using the dev |
| interface, /dev/rtc . |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-dev. |
| |
| config RTC_INTF_DEV_UIE_EMUL |
| bool "RTC UIE emulation on dev interface" |
| depends on RTC_INTF_DEV |
| help |
| Provides an emulation for RTC_UIE if the underlaying rtc chip |
| driver did not provide RTC_UIE ioctls. |
| |
| comment "RTC drivers" |
| depends on RTC_CLASS |
| |
| config RTC_DRV_X1205 |
| tristate "Xicor/Intersil X1205" |
| depends on RTC_CLASS && I2C |
| help |
| If you say yes here you get support for the |
| Xicor/Intersil X1205 RTC chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-x1205. |
| |
| config RTC_DRV_DS1307 |
| tristate "Dallas/Maxim DS1307 and similar I2C RTC chips" |
| depends on RTC_CLASS && I2C |
| help |
| If you say yes here you get support for various compatible RTC |
| chips (often with battery backup) connected with I2C. This driver |
| should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00, |
| and probably other chips. In some cases the RTC must already |
| have been initialized (by manufacturing or a bootloader). |
| |
| The first seven registers on these chips hold an RTC, and other |
| registers may add features such as NVRAM, a trickle charger for |
| the RTC/NVRAM backup power, and alarms. This driver may not |
| expose all those available chip features. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-ds1307. |
| |
| config RTC_DRV_DS1553 |
| tristate "Dallas DS1553" |
| depends on RTC_CLASS |
| help |
| If you say yes here you get support for the |
| Dallas DS1553 timekeeping chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-ds1553. |
| |
| config RTC_DRV_DS1672 |
| tristate "Dallas/Maxim DS1672" |
| depends on RTC_CLASS && I2C |
| help |
| If you say yes here you get support for the |
| Dallas/Maxim DS1672 timekeeping chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-ds1672. |
| |
| config RTC_DRV_DS1742 |
| tristate "Dallas DS1742" |
| depends on RTC_CLASS |
| help |
| If you say yes here you get support for the |
| Dallas DS1742 timekeeping chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-ds1742. |
| |
| config RTC_DRV_PCF8563 |
| tristate "Philips PCF8563/Epson RTC8564" |
| depends on RTC_CLASS && I2C |
| help |
| If you say yes here you get support for the |
| Philips PCF8563 RTC chip. The Epson RTC8564 |
| should work as well. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-pcf8563. |
| |
| config RTC_DRV_PCF8583 |
| tristate "Philips PCF8583" |
| depends on RTC_CLASS && I2C |
| help |
| If you say yes here you get support for the |
| Philips PCF8583 RTC chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-pcf8583. |
| |
| config RTC_DRV_RS5C348 |
| tristate "Ricoh RS5C348A/B" |
| depends on RTC_CLASS && SPI |
| help |
| If you say yes here you get support for the |
| Ricoh RS5C348A and RS5C348B RTC chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-rs5c348. |
| |
| config RTC_DRV_RS5C372 |
| tristate "Ricoh RS5C372A/B" |
| depends on RTC_CLASS && I2C |
| help |
| If you say yes here you get support for the |
| Ricoh RS5C372A and RS5C372B RTC chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-rs5c372. |
| |
| config RTC_DRV_M48T86 |
| tristate "ST M48T86/Dallas DS12887" |
| depends on RTC_CLASS |
| help |
| If you say Y here you will get support for the |
| ST M48T86 and Dallas DS12887 RTC chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-m48t86. |
| |
| config RTC_DRV_EP93XX |
| tristate "Cirrus Logic EP93XX" |
| depends on RTC_CLASS && ARCH_EP93XX |
| help |
| If you say yes here you get support for the |
| RTC embedded in the Cirrus Logic EP93XX processors. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-ep93xx. |
| |
| config RTC_DRV_SA1100 |
| tristate "SA11x0/PXA2xx" |
| depends on RTC_CLASS && (ARCH_SA1100 || ARCH_PXA) |
| help |
| If you say Y here you will get access to the real time clock |
| built into your SA11x0 or PXA2xx CPU. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rtc-sa1100. |
| |
| config RTC_DRV_VR41XX |
| tristate "NEC VR41XX" |
| depends on RTC_CLASS && CPU_VR41XX |
| help |
| If you say Y here you will get access to the real time clock |
| built into your NEC VR41XX CPU. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rtc-vr41xx. |
| |
| config RTC_DRV_PL031 |
| tristate "ARM AMBA PL031 RTC" |
| depends on RTC_CLASS && ARM_AMBA |
| help |
| If you say Y here you will get access to ARM AMBA |
| PrimeCell PL031 UART found on certain ARM SOCs. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rtc-pl031. |
| |
| config RTC_DRV_AT91 |
| tristate "AT91RM9200" |
| depends on RTC_CLASS && ARCH_AT91RM9200 |
| help |
| Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock). |
| |
| config RTC_DRV_TEST |
| tristate "Test driver/device" |
| depends on RTC_CLASS |
| help |
| If you say yes here you get support for the |
| RTC test driver. It's a software RTC which can be |
| used to test the RTC subsystem APIs. It gets |
| the time from the system clock. |
| You want this driver only if you are doing development |
| on the RTC subsystem. Please read the source code |
| for further details. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-test. |
| |
| config RTC_DRV_MAX6902 |
| tristate "Maxim 6902" |
| depends on RTC_CLASS && SPI |
| help |
| If you say yes here you will get support for the |
| Maxim MAX6902 spi RTC chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-max6902. |
| |
| config RTC_DRV_V3020 |
| tristate "EM Microelectronic V3020" |
| depends on RTC_CLASS |
| help |
| If you say yes here you will get support for the |
| EM Microelectronic v3020 RTC chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called rtc-v3020. |
| |
| endmenu |
