| /***************************************************************************** |
| * * |
| * File: cxgb2.c * |
| * $Revision: 1.25 $ * |
| * $Date: 2005/06/22 00:43:25 $ * |
| * Description: * |
| * Chelsio 10Gb Ethernet Driver. * |
| * * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License, version 2, as * |
| * published by the Free Software Foundation. * |
| * * |
| * You should have received a copy of the GNU General Public License along * |
| * with this program; if not, write to the Free Software Foundation, Inc., * |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * |
| * * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * |
| * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * |
| * * |
| * http://www.chelsio.com * |
| * * |
| * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * |
| * All rights reserved. * |
| * * |
| * Maintainers: maintainers@chelsio.com * |
| * * |
| * Authors: Dimitrios Michailidis <dm@chelsio.com> * |
| * Tina Yang <tainay@chelsio.com> * |
| * Felix Marti <felix@chelsio.com> * |
| * Scott Bardone <sbardone@chelsio.com> * |
| * Kurt Ottaway <kottaway@chelsio.com> * |
| * Frank DiMambro <frank@chelsio.com> * |
| * * |
| * History: * |
| * * |
| ****************************************************************************/ |
| |
| #include "common.h" |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_vlan.h> |
| #include <linux/mii.h> |
| #include <linux/sockios.h> |
| #include <linux/proc_fs.h> |
| #include <linux/dma-mapping.h> |
| #include <asm/uaccess.h> |
| |
| #include "cpl5_cmd.h" |
| #include "regs.h" |
| #include "gmac.h" |
| #include "cphy.h" |
| #include "sge.h" |
| #include "espi.h" |
| |
| #ifdef work_struct |
| #include <linux/tqueue.h> |
| #define INIT_WORK INIT_TQUEUE |
| #define schedule_work schedule_task |
| #define flush_scheduled_work flush_scheduled_tasks |
| |
| static inline void schedule_mac_stats_update(struct adapter *ap, int secs) |
| { |
| mod_timer(&ap->stats_update_timer, jiffies + secs * HZ); |
| } |
| |
| static inline void cancel_mac_stats_update(struct adapter *ap) |
| { |
| del_timer_sync(&ap->stats_update_timer); |
| flush_scheduled_tasks(); |
| } |
| |
| /* |
| * Stats update timer for 2.4. It schedules a task to do the actual update as |
| * we need to access MAC statistics in process context. |
| */ |
| static void mac_stats_timer(unsigned long data) |
| { |
| struct adapter *ap = (struct adapter *)data; |
| |
| schedule_task(&ap->stats_update_task); |
| } |
| #else |
| #include <linux/workqueue.h> |
| |
| static inline void schedule_mac_stats_update(struct adapter *ap, int secs) |
| { |
| schedule_delayed_work(&ap->stats_update_task, secs * HZ); |
| } |
| |
| static inline void cancel_mac_stats_update(struct adapter *ap) |
| { |
| cancel_delayed_work(&ap->stats_update_task); |
| } |
| #endif |
| |
| #define MAX_CMDQ_ENTRIES 16384 |
| #define MAX_CMDQ1_ENTRIES 1024 |
| #define MAX_RX_BUFFERS 16384 |
| #define MAX_RX_JUMBO_BUFFERS 16384 |
| #define MAX_TX_BUFFERS_HIGH 16384U |
| #define MAX_TX_BUFFERS_LOW 1536U |
| #define MIN_FL_ENTRIES 32 |
| |
| #define PORT_MASK ((1 << MAX_NPORTS) - 1) |
| |
| #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ |
| NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ |
| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) |
| |
| /* |
| * The EEPROM is actually bigger but only the first few bytes are used so we |
| * only report those. |
| */ |
| #define EEPROM_SIZE 32 |
| |
| MODULE_DESCRIPTION(DRV_DESCRIPTION); |
| MODULE_AUTHOR("Chelsio Communications"); |
| MODULE_LICENSE("GPL"); |
| |
| static int dflt_msg_enable = DFLT_MSG_ENABLE; |
| |
| module_param(dflt_msg_enable, int, 0); |
| MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap"); |
| |
| |
| static const char pci_speed[][4] = { |
| "33", "66", "100", "133" |
| }; |
| |
| /* |
| * Setup MAC to receive the types of packets we want. |
| */ |
| static void t1_set_rxmode(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| struct t1_rx_mode rm; |
| |
| rm.dev = dev; |
| rm.idx = 0; |
| rm.list = dev->mc_list; |
| mac->ops->set_rx_mode(mac, &rm); |
| } |
| |
| static void link_report(struct port_info *p) |
| { |
| if (!netif_carrier_ok(p->dev)) |
| printk(KERN_INFO "%s: link down\n", p->dev->name); |
| else { |
| const char *s = "10Mbps"; |
| |
| switch (p->link_config.speed) { |
| case SPEED_10000: s = "10Gbps"; break; |
| case SPEED_1000: s = "1000Mbps"; break; |
| case SPEED_100: s = "100Mbps"; break; |
| } |
| |
| printk(KERN_INFO "%s: link up, %s, %s-duplex\n", |
| p->dev->name, s, |
| p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); |
| } |
| } |
| |
| void t1_link_changed(struct adapter *adapter, int port_id, int link_stat, |
| int speed, int duplex, int pause) |
| { |
| struct port_info *p = &adapter->port[port_id]; |
| |
| if (link_stat != netif_carrier_ok(p->dev)) { |
| if (link_stat) |
| netif_carrier_on(p->dev); |
| else |
| netif_carrier_off(p->dev); |
| link_report(p); |
| |
| } |
| } |
| |
| static void link_start(struct port_info *p) |
| { |
| struct cmac *mac = p->mac; |
| |
| mac->ops->reset(mac); |
| if (mac->ops->macaddress_set) |
| mac->ops->macaddress_set(mac, p->dev->dev_addr); |
| t1_set_rxmode(p->dev); |
| t1_link_start(p->phy, mac, &p->link_config); |
| mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); |
| } |
| |
| static void enable_hw_csum(struct adapter *adapter) |
| { |
| if (adapter->flags & TSO_CAPABLE) |
| t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */ |
| t1_tp_set_tcp_checksum_offload(adapter, 1); |
| } |
| |
| /* |
| * Things to do upon first use of a card. |
| * This must run with the rtnl lock held. |
| */ |
| static int cxgb_up(struct adapter *adapter) |
| { |
| int err = 0; |
| |
| if (!(adapter->flags & FULL_INIT_DONE)) { |
| err = t1_init_hw_modules(adapter); |
| if (err) |
| goto out_err; |
| |
| enable_hw_csum(adapter); |
| adapter->flags |= FULL_INIT_DONE; |
| } |
| |
| t1_interrupts_clear(adapter); |
| if ((err = request_irq(adapter->pdev->irq, |
| t1_select_intr_handler(adapter), SA_SHIRQ, |
| adapter->name, adapter))) { |
| goto out_err; |
| } |
| t1_sge_start(adapter->sge); |
| t1_interrupts_enable(adapter); |
| out_err: |
| return err; |
| } |
| |
| /* |
| * Release resources when all the ports have been stopped. |
| */ |
| static void cxgb_down(struct adapter *adapter) |
| { |
| t1_sge_stop(adapter->sge); |
| t1_interrupts_disable(adapter); |
| free_irq(adapter->pdev->irq, adapter); |
| } |
| |
| static int cxgb_open(struct net_device *dev) |
| { |
| int err; |
| struct adapter *adapter = dev->priv; |
| int other_ports = adapter->open_device_map & PORT_MASK; |
| |
| if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) |
| return err; |
| |
| __set_bit(dev->if_port, &adapter->open_device_map); |
| link_start(&adapter->port[dev->if_port]); |
| netif_start_queue(dev); |
| if (!other_ports && adapter->params.stats_update_period) |
| schedule_mac_stats_update(adapter, |
| adapter->params.stats_update_period); |
| return 0; |
| } |
| |
| static int cxgb_close(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct cmac *mac = p->mac; |
| |
| netif_stop_queue(dev); |
| mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); |
| netif_carrier_off(dev); |
| |
| clear_bit(dev->if_port, &adapter->open_device_map); |
| if (adapter->params.stats_update_period && |
| !(adapter->open_device_map & PORT_MASK)) { |
| /* Stop statistics accumulation. */ |
| smp_mb__after_clear_bit(); |
| spin_lock(&adapter->work_lock); /* sync with update task */ |
| spin_unlock(&adapter->work_lock); |
| cancel_mac_stats_update(adapter); |
| } |
| |
| if (!adapter->open_device_map) |
| cxgb_down(adapter); |
| return 0; |
| } |
| |
| static struct net_device_stats *t1_get_stats(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct net_device_stats *ns = &p->netstats; |
| const struct cmac_statistics *pstats; |
| |
| /* Do a full update of the MAC stats */ |
| pstats = p->mac->ops->statistics_update(p->mac, |
| MAC_STATS_UPDATE_FULL); |
| |
| ns->tx_packets = pstats->TxUnicastFramesOK + |
| pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK; |
| |
| ns->rx_packets = pstats->RxUnicastFramesOK + |
| pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK; |
| |
| ns->tx_bytes = pstats->TxOctetsOK; |
| ns->rx_bytes = pstats->RxOctetsOK; |
| |
| ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors + |
| pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions; |
| ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors + |
| pstats->RxFCSErrors + pstats->RxAlignErrors + |
| pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors + |
| pstats->RxSymbolErrors + pstats->RxRuntErrors; |
| |
| ns->multicast = pstats->RxMulticastFramesOK; |
| ns->collisions = pstats->TxTotalCollisions; |
| |
| /* detailed rx_errors */ |
| ns->rx_length_errors = pstats->RxFrameTooLongErrors + |
| pstats->RxJabberErrors; |
| ns->rx_over_errors = 0; |
| ns->rx_crc_errors = pstats->RxFCSErrors; |
| ns->rx_frame_errors = pstats->RxAlignErrors; |
| ns->rx_fifo_errors = 0; |
| ns->rx_missed_errors = 0; |
| |
| /* detailed tx_errors */ |
| ns->tx_aborted_errors = pstats->TxFramesAbortedDueToXSCollisions; |
| ns->tx_carrier_errors = 0; |
| ns->tx_fifo_errors = pstats->TxUnderrun; |
| ns->tx_heartbeat_errors = 0; |
| ns->tx_window_errors = pstats->TxLateCollisions; |
| return ns; |
| } |
| |
| static u32 get_msglevel(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| return adapter->msg_enable; |
| } |
| |
| static void set_msglevel(struct net_device *dev, u32 val) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| adapter->msg_enable = val; |
| } |
| |
| static char stats_strings[][ETH_GSTRING_LEN] = { |
| "TxOctetsOK", |
| "TxOctetsBad", |
| "TxUnicastFramesOK", |
| "TxMulticastFramesOK", |
| "TxBroadcastFramesOK", |
| "TxPauseFrames", |
| "TxFramesWithDeferredXmissions", |
| "TxLateCollisions", |
| "TxTotalCollisions", |
| "TxFramesAbortedDueToXSCollisions", |
| "TxUnderrun", |
| "TxLengthErrors", |
| "TxInternalMACXmitError", |
| "TxFramesWithExcessiveDeferral", |
| "TxFCSErrors", |
| |
| "RxOctetsOK", |
| "RxOctetsBad", |
| "RxUnicastFramesOK", |
| "RxMulticastFramesOK", |
| "RxBroadcastFramesOK", |
| "RxPauseFrames", |
| "RxFCSErrors", |
| "RxAlignErrors", |
| "RxSymbolErrors", |
| "RxDataErrors", |
| "RxSequenceErrors", |
| "RxRuntErrors", |
| "RxJabberErrors", |
| "RxInternalMACRcvError", |
| "RxInRangeLengthErrors", |
| "RxOutOfRangeLengthField", |
| "RxFrameTooLongErrors", |
| |
| "TSO", |
| "VLANextractions", |
| "VLANinsertions", |
| "RxCsumGood", |
| "TxCsumOffload", |
| "RxDrops" |
| |
| "respQ_empty", |
| "respQ_overflow", |
| "freelistQ_empty", |
| "pkt_too_big", |
| "pkt_mismatch", |
| "cmdQ_full0", |
| "cmdQ_full1", |
| "tx_ipfrags", |
| "tx_reg_pkts", |
| "tx_lso_pkts", |
| "tx_do_cksum", |
| |
| "espi_DIP2ParityErr", |
| "espi_DIP4Err", |
| "espi_RxDrops", |
| "espi_TxDrops", |
| "espi_RxOvfl", |
| "espi_ParityErr" |
| }; |
| |
| #define T2_REGMAP_SIZE (3 * 1024) |
| |
| static int get_regs_len(struct net_device *dev) |
| { |
| return T2_REGMAP_SIZE; |
| } |
| |
| static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| strcpy(info->driver, DRV_NAME); |
| strcpy(info->version, DRV_VERSION); |
| strcpy(info->fw_version, "N/A"); |
| strcpy(info->bus_info, pci_name(adapter->pdev)); |
| } |
| |
| static int get_stats_count(struct net_device *dev) |
| { |
| return ARRAY_SIZE(stats_strings); |
| } |
| |
| static void get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| if (stringset == ETH_SS_STATS) |
| memcpy(data, stats_strings, sizeof(stats_strings)); |
| } |
| |
| static void get_stats(struct net_device *dev, struct ethtool_stats *stats, |
| u64 *data) |
| { |
| struct adapter *adapter = dev->priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| const struct cmac_statistics *s; |
| const struct sge_port_stats *ss; |
| const struct sge_intr_counts *t; |
| |
| s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); |
| ss = t1_sge_get_port_stats(adapter->sge, dev->if_port); |
| t = t1_sge_get_intr_counts(adapter->sge); |
| |
| *data++ = s->TxOctetsOK; |
| *data++ = s->TxOctetsBad; |
| *data++ = s->TxUnicastFramesOK; |
| *data++ = s->TxMulticastFramesOK; |
| *data++ = s->TxBroadcastFramesOK; |
| *data++ = s->TxPauseFrames; |
| *data++ = s->TxFramesWithDeferredXmissions; |
| *data++ = s->TxLateCollisions; |
| *data++ = s->TxTotalCollisions; |
| *data++ = s->TxFramesAbortedDueToXSCollisions; |
| *data++ = s->TxUnderrun; |
| *data++ = s->TxLengthErrors; |
| *data++ = s->TxInternalMACXmitError; |
| *data++ = s->TxFramesWithExcessiveDeferral; |
| *data++ = s->TxFCSErrors; |
| |
| *data++ = s->RxOctetsOK; |
| *data++ = s->RxOctetsBad; |
| *data++ = s->RxUnicastFramesOK; |
| *data++ = s->RxMulticastFramesOK; |
| *data++ = s->RxBroadcastFramesOK; |
| *data++ = s->RxPauseFrames; |
| *data++ = s->RxFCSErrors; |
| *data++ = s->RxAlignErrors; |
| *data++ = s->RxSymbolErrors; |
| *data++ = s->RxDataErrors; |
| *data++ = s->RxSequenceErrors; |
| *data++ = s->RxRuntErrors; |
| *data++ = s->RxJabberErrors; |
| *data++ = s->RxInternalMACRcvError; |
| *data++ = s->RxInRangeLengthErrors; |
| *data++ = s->RxOutOfRangeLengthField; |
| *data++ = s->RxFrameTooLongErrors; |
| |
| *data++ = ss->tso; |
| *data++ = ss->vlan_xtract; |
| *data++ = ss->vlan_insert; |
| *data++ = ss->rx_cso_good; |
| *data++ = ss->tx_cso; |
| *data++ = ss->rx_drops; |
| |
| *data++ = (u64)t->respQ_empty; |
| *data++ = (u64)t->respQ_overflow; |
| *data++ = (u64)t->freelistQ_empty; |
| *data++ = (u64)t->pkt_too_big; |
| *data++ = (u64)t->pkt_mismatch; |
| *data++ = (u64)t->cmdQ_full[0]; |
| *data++ = (u64)t->cmdQ_full[1]; |
| *data++ = (u64)t->tx_ipfrags; |
| *data++ = (u64)t->tx_reg_pkts; |
| *data++ = (u64)t->tx_lso_pkts; |
| *data++ = (u64)t->tx_do_cksum; |
| } |
| |
| static inline void reg_block_dump(struct adapter *ap, void *buf, |
| unsigned int start, unsigned int end) |
| { |
| u32 *p = buf + start; |
| |
| for ( ; start <= end; start += sizeof(u32)) |
| *p++ = readl(ap->regs + start); |
| } |
| |
| static void get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *buf) |
| { |
| struct adapter *ap = dev->priv; |
| |
| /* |
| * Version scheme: bits 0..9: chip version, bits 10..15: chip revision |
| */ |
| regs->version = 2; |
| |
| memset(buf, 0, T2_REGMAP_SIZE); |
| reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); |
| } |
| |
| static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| |
| cmd->supported = p->link_config.supported; |
| cmd->advertising = p->link_config.advertising; |
| |
| if (netif_carrier_ok(dev)) { |
| cmd->speed = p->link_config.speed; |
| cmd->duplex = p->link_config.duplex; |
| } else { |
| cmd->speed = -1; |
| cmd->duplex = -1; |
| } |
| |
| cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; |
| cmd->phy_address = p->phy->addr; |
| cmd->transceiver = XCVR_EXTERNAL; |
| cmd->autoneg = p->link_config.autoneg; |
| cmd->maxtxpkt = 0; |
| cmd->maxrxpkt = 0; |
| return 0; |
| } |
| |
| static int speed_duplex_to_caps(int speed, int duplex) |
| { |
| int cap = 0; |
| |
| switch (speed) { |
| case SPEED_10: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_10baseT_Full; |
| else |
| cap = SUPPORTED_10baseT_Half; |
| break; |
| case SPEED_100: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_100baseT_Full; |
| else |
| cap = SUPPORTED_100baseT_Half; |
| break; |
| case SPEED_1000: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_1000baseT_Full; |
| else |
| cap = SUPPORTED_1000baseT_Half; |
| break; |
| case SPEED_10000: |
| if (duplex == DUPLEX_FULL) |
| cap = SUPPORTED_10000baseT_Full; |
| } |
| return cap; |
| } |
| |
| #define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ |
| ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ |
| ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ |
| ADVERTISED_10000baseT_Full) |
| |
| static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct link_config *lc = &p->link_config; |
| |
| if (!(lc->supported & SUPPORTED_Autoneg)) |
| return -EOPNOTSUPP; /* can't change speed/duplex */ |
| |
| if (cmd->autoneg == AUTONEG_DISABLE) { |
| int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); |
| |
| if (!(lc->supported & cap) || cmd->speed == SPEED_1000) |
| return -EINVAL; |
| lc->requested_speed = cmd->speed; |
| lc->requested_duplex = cmd->duplex; |
| lc->advertising = 0; |
| } else { |
| cmd->advertising &= ADVERTISED_MASK; |
| if (cmd->advertising & (cmd->advertising - 1)) |
| cmd->advertising = lc->supported; |
| cmd->advertising &= lc->supported; |
| if (!cmd->advertising) |
| return -EINVAL; |
| lc->requested_speed = SPEED_INVALID; |
| lc->requested_duplex = DUPLEX_INVALID; |
| lc->advertising = cmd->advertising | ADVERTISED_Autoneg; |
| } |
| lc->autoneg = cmd->autoneg; |
| if (netif_running(dev)) |
| t1_link_start(p->phy, p->mac, lc); |
| return 0; |
| } |
| |
| static void get_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| |
| epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; |
| epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; |
| epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; |
| } |
| |
| static int set_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *epause) |
| { |
| struct adapter *adapter = dev->priv; |
| struct port_info *p = &adapter->port[dev->if_port]; |
| struct link_config *lc = &p->link_config; |
| |
| if (epause->autoneg == AUTONEG_DISABLE) |
| lc->requested_fc = 0; |
| else if (lc->supported & SUPPORTED_Autoneg) |
| lc->requested_fc = PAUSE_AUTONEG; |
| else |
| return -EINVAL; |
| |
| if (epause->rx_pause) |
| lc->requested_fc |= PAUSE_RX; |
| if (epause->tx_pause) |
| lc->requested_fc |= PAUSE_TX; |
| if (lc->autoneg == AUTONEG_ENABLE) { |
| if (netif_running(dev)) |
| t1_link_start(p->phy, p->mac, lc); |
| } else { |
| lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); |
| if (netif_running(dev)) |
| p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1, |
| lc->fc); |
| } |
| return 0; |
| } |
| |
| static u32 get_rx_csum(struct net_device *dev) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| return (adapter->flags & RX_CSUM_ENABLED) != 0; |
| } |
| |
| static int set_rx_csum(struct net_device *dev, u32 data) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| if (data) |
| adapter->flags |= RX_CSUM_ENABLED; |
| else |
| adapter->flags &= ~RX_CSUM_ENABLED; |
| return 0; |
| } |
| |
| static int set_tso(struct net_device *dev, u32 value) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| if (!(adapter->flags & TSO_CAPABLE)) |
| return value ? -EOPNOTSUPP : 0; |
| return ethtool_op_set_tso(dev, value); |
| } |
| |
| static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| struct adapter *adapter = dev->priv; |
| int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; |
| |
| e->rx_max_pending = MAX_RX_BUFFERS; |
| e->rx_mini_max_pending = 0; |
| e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; |
| e->tx_max_pending = MAX_CMDQ_ENTRIES; |
| |
| e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl]; |
| e->rx_mini_pending = 0; |
| e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl]; |
| e->tx_pending = adapter->params.sge.cmdQ_size[0]; |
| } |
| |
| static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) |
| { |
| struct adapter *adapter = dev->priv; |
| int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; |
| |
| if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending || |
| e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || |
| e->tx_pending > MAX_CMDQ_ENTRIES || |
| e->rx_pending < MIN_FL_ENTRIES || |
| e->rx_jumbo_pending < MIN_FL_ENTRIES || |
| e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1)) |
| return -EINVAL; |
| |
| if (adapter->flags & FULL_INIT_DONE) |
| return -EBUSY; |
| |
| adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; |
| adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; |
| adapter->params.sge.cmdQ_size[0] = e->tx_pending; |
| adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ? |
| MAX_CMDQ1_ENTRIES : e->tx_pending; |
| return 0; |
| } |
| |
| static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| /* |
| * If RX coalescing is requested we use NAPI, otherwise interrupts. |
| * This choice can be made only when all ports and the TOE are off. |
| */ |
| if (adapter->open_device_map == 0) |
| adapter->params.sge.polling = c->use_adaptive_rx_coalesce; |
| |
| if (adapter->params.sge.polling) { |
| adapter->params.sge.rx_coalesce_usecs = 0; |
| } else { |
| adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; |
| } |
| adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; |
| adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; |
| t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); |
| return 0; |
| } |
| |
| static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; |
| c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; |
| c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; |
| return 0; |
| } |
| |
| static int get_eeprom_len(struct net_device *dev) |
| { |
| return EEPROM_SIZE; |
| } |
| |
| #define EEPROM_MAGIC(ap) \ |
| (PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16)) |
| |
| static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, |
| u8 *data) |
| { |
| int i; |
| u8 buf[EEPROM_SIZE] __attribute__((aligned(4))); |
| struct adapter *adapter = dev->priv; |
| |
| e->magic = EEPROM_MAGIC(adapter); |
| for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32)) |
| t1_seeprom_read(adapter, i, (u32 *)&buf[i]); |
| memcpy(data, buf + e->offset, e->len); |
| return 0; |
| } |
| |
| static struct ethtool_ops t1_ethtool_ops = { |
| .get_settings = get_settings, |
| .set_settings = set_settings, |
| .get_drvinfo = get_drvinfo, |
| .get_msglevel = get_msglevel, |
| .set_msglevel = set_msglevel, |
| .get_ringparam = get_sge_param, |
| .set_ringparam = set_sge_param, |
| .get_coalesce = get_coalesce, |
| .set_coalesce = set_coalesce, |
| .get_eeprom_len = get_eeprom_len, |
| .get_eeprom = get_eeprom, |
| .get_pauseparam = get_pauseparam, |
| .set_pauseparam = set_pauseparam, |
| .get_rx_csum = get_rx_csum, |
| .set_rx_csum = set_rx_csum, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .set_tx_csum = ethtool_op_set_tx_csum, |
| .get_sg = ethtool_op_get_sg, |
| .set_sg = ethtool_op_set_sg, |
| .get_link = ethtool_op_get_link, |
| .get_strings = get_strings, |
| .get_stats_count = get_stats_count, |
| .get_ethtool_stats = get_stats, |
| .get_regs_len = get_regs_len, |
| .get_regs = get_regs, |
| .get_tso = ethtool_op_get_tso, |
| .set_tso = set_tso, |
| }; |
| |
| static void cxgb_proc_cleanup(struct adapter *adapter, |
| struct proc_dir_entry *dir) |
| { |
| const char *name; |
| name = adapter->name; |
| remove_proc_entry(name, dir); |
| } |
| //#define chtoe_setup_toedev(adapter) NULL |
| #define update_mtu_tab(adapter) |
| #define write_smt_entry(adapter, idx) |
| |
| static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) |
| { |
| struct adapter *adapter = dev->priv; |
| struct mii_ioctl_data *data = if_mii(req); |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| data->phy_id = adapter->port[dev->if_port].phy->addr; |
| /* FALLTHRU */ |
| case SIOCGMIIREG: { |
| struct cphy *phy = adapter->port[dev->if_port].phy; |
| u32 val; |
| |
| if (!phy->mdio_read) |
| return -EOPNOTSUPP; |
| phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, |
| &val); |
| data->val_out = val; |
| break; |
| } |
| case SIOCSMIIREG: { |
| struct cphy *phy = adapter->port[dev->if_port].phy; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (!phy->mdio_write) |
| return -EOPNOTSUPP; |
| phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, |
| data->val_in); |
| break; |
| } |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| static int t1_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| int ret; |
| struct adapter *adapter = dev->priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| |
| if (!mac->ops->set_mtu) |
| return -EOPNOTSUPP; |
| if (new_mtu < 68) |
| return -EINVAL; |
| if ((ret = mac->ops->set_mtu(mac, new_mtu))) |
| return ret; |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| static int t1_set_mac_addr(struct net_device *dev, void *p) |
| { |
| struct adapter *adapter = dev->priv; |
| struct cmac *mac = adapter->port[dev->if_port].mac; |
| struct sockaddr *addr = p; |
| |
| if (!mac->ops->macaddress_set) |
| return -EOPNOTSUPP; |
| |
| memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); |
| mac->ops->macaddress_set(mac, dev->dev_addr); |
| return 0; |
| } |
| |
| #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) |
| static void vlan_rx_register(struct net_device *dev, |
| struct vlan_group *grp) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| spin_lock_irq(&adapter->async_lock); |
| adapter->vlan_grp = grp; |
| t1_set_vlan_accel(adapter, grp != NULL); |
| spin_unlock_irq(&adapter->async_lock); |
| } |
| |
| static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) |
| { |
| struct adapter *adapter = dev->priv; |
| |
| spin_lock_irq(&adapter->async_lock); |
| if (adapter->vlan_grp) |
| adapter->vlan_grp->vlan_devices[vid] = NULL; |
| spin_unlock_irq(&adapter->async_lock); |
| } |
| #endif |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void t1_netpoll(struct net_device *dev) |
| { |
| unsigned long flags; |
| struct adapter *adapter = dev->priv; |
| |
| local_irq_save(flags); |
| t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL); |
| local_irq_restore(flags); |
| } |
| #endif |
| |
| /* |
| * Periodic accumulation of MAC statistics. This is used only if the MAC |
| * does not have any other way to prevent stats counter overflow. |
| */ |
| static void mac_stats_task(void *data) |
| { |
| int i; |
| struct adapter *adapter = data; |
| |
| for_each_port(adapter, i) { |
| struct port_info *p = &adapter->port[i]; |
| |
| if (netif_running(p->dev)) |
| p->mac->ops->statistics_update(p->mac, |
| MAC_STATS_UPDATE_FAST); |
| } |
| |
| /* Schedule the next statistics update if any port is active. */ |
| spin_lock(&adapter->work_lock); |
| if (adapter->open_device_map & PORT_MASK) |
| schedule_mac_stats_update(adapter, |
| adapter->params.stats_update_period); |
| spin_unlock(&adapter->work_lock); |
| } |
| |
| /* |
| * Processes elmer0 external interrupts in process context. |
| */ |
| static void ext_intr_task(void *data) |
| { |
| struct adapter *adapter = data; |
| |
| elmer0_ext_intr_handler(adapter); |
| |
| /* Now reenable external interrupts */ |
| spin_lock_irq(&adapter->async_lock); |
| adapter->slow_intr_mask |= F_PL_INTR_EXT; |
| writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); |
| writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, |
| adapter->regs + A_PL_ENABLE); |
| spin_unlock_irq(&adapter->async_lock); |
| } |
| |
| /* |
| * Interrupt-context handler for elmer0 external interrupts. |
| */ |
| void t1_elmer0_ext_intr(struct adapter *adapter) |
| { |
| /* |
| * Schedule a task to handle external interrupts as we require |
| * a process context. We disable EXT interrupts in the interim |
| * and let the task reenable them when it's done. |
| */ |
| adapter->slow_intr_mask &= ~F_PL_INTR_EXT; |
| writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, |
| adapter->regs + A_PL_ENABLE); |
| schedule_work(&adapter->ext_intr_handler_task); |
| } |
| |
| void t1_fatal_err(struct adapter *adapter) |
| { |
| if (adapter->flags & FULL_INIT_DONE) { |
| t1_sge_stop(adapter->sge); |
| t1_interrupts_disable(adapter); |
| } |
| CH_ALERT("%s: encountered fatal error, operation suspended\n", |
| adapter->name); |
| } |
| |
| static int __devinit init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| static int version_printed; |
| |
| int i, err, pci_using_dac = 0; |
| unsigned long mmio_start, mmio_len; |
| const struct board_info *bi; |
| struct adapter *adapter = NULL; |
| struct port_info *pi; |
| |
| if (!version_printed) { |
| printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION, |
| DRV_VERSION); |
| ++version_printed; |
| } |
| |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| |
| if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { |
| CH_ERR("%s: cannot find PCI device memory base address\n", |
| pci_name(pdev)); |
| err = -ENODEV; |
| goto out_disable_pdev; |
| } |
| |
| if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { |
| pci_using_dac = 1; |
| |
| if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { |
| CH_ERR("%s: unable to obtain 64-bit DMA for" |
| "consistent allocations\n", pci_name(pdev)); |
| err = -ENODEV; |
| goto out_disable_pdev; |
| } |
| |
| } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { |
| CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); |
| goto out_disable_pdev; |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) { |
| CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); |
| goto out_disable_pdev; |
| } |
| |
| pci_set_master(pdev); |
| |
| mmio_start = pci_resource_start(pdev, 0); |
| mmio_len = pci_resource_len(pdev, 0); |
| bi = t1_get_board_info(ent->driver_data); |
| |
| for (i = 0; i < bi->port_number; ++i) { |
| struct net_device *netdev; |
| |
| netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter)); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto out_free_dev; |
| } |
| |
| SET_MODULE_OWNER(netdev); |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| if (!adapter) { |
| adapter = netdev->priv; |
| adapter->pdev = pdev; |
| adapter->port[0].dev = netdev; /* so we don't leak it */ |
| |
| adapter->regs = ioremap(mmio_start, mmio_len); |
| if (!adapter->regs) { |
| CH_ERR("%s: cannot map device registers\n", |
| pci_name(pdev)); |
| err = -ENOMEM; |
| goto out_free_dev; |
| } |
| |
| if (t1_get_board_rev(adapter, bi, &adapter->params)) { |
| err = -ENODEV; /* Can't handle this chip rev */ |
| goto out_free_dev; |
| } |
| |
| adapter->name = pci_name(pdev); |
| adapter->msg_enable = dflt_msg_enable; |
| adapter->mmio_len = mmio_len; |
| |
| init_MUTEX(&adapter->mib_mutex); |
| spin_lock_init(&adapter->tpi_lock); |
| spin_lock_init(&adapter->work_lock); |
| spin_lock_init(&adapter->async_lock); |
| |
| INIT_WORK(&adapter->ext_intr_handler_task, |
| ext_intr_task, adapter); |
| INIT_WORK(&adapter->stats_update_task, mac_stats_task, |
| adapter); |
| #ifdef work_struct |
| init_timer(&adapter->stats_update_timer); |
| adapter->stats_update_timer.function = mac_stats_timer; |
| adapter->stats_update_timer.data = |
| (unsigned long)adapter; |
| #endif |
| |
| pci_set_drvdata(pdev, netdev); |
| } |
| |
| pi = &adapter->port[i]; |
| pi->dev = netdev; |
| netif_carrier_off(netdev); |
| netdev->irq = pdev->irq; |
| netdev->if_port = i; |
| netdev->mem_start = mmio_start; |
| netdev->mem_end = mmio_start + mmio_len - 1; |
| netdev->priv = adapter; |
| netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; |
| netdev->features |= NETIF_F_LLTX; |
| |
| adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; |
| if (pci_using_dac) |
| netdev->features |= NETIF_F_HIGHDMA; |
| if (vlan_tso_capable(adapter)) { |
| #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) |
| adapter->flags |= VLAN_ACCEL_CAPABLE; |
| netdev->features |= |
| NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; |
| netdev->vlan_rx_register = vlan_rx_register; |
| netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; |
| #endif |
| adapter->flags |= TSO_CAPABLE; |
| netdev->features |= NETIF_F_TSO; |
| } |
| |
| netdev->open = cxgb_open; |
| netdev->stop = cxgb_close; |
| netdev->hard_start_xmit = t1_start_xmit; |
| netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ? |
| sizeof(struct cpl_tx_pkt_lso) : |
| sizeof(struct cpl_tx_pkt); |
| netdev->get_stats = t1_get_stats; |
| netdev->set_multicast_list = t1_set_rxmode; |
| netdev->do_ioctl = t1_ioctl; |
| netdev->change_mtu = t1_change_mtu; |
| netdev->set_mac_address = t1_set_mac_addr; |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| netdev->poll_controller = t1_netpoll; |
| #endif |
| netdev->weight = 64; |
| |
| SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); |
| } |
| |
| if (t1_init_sw_modules(adapter, bi) < 0) { |
| err = -ENODEV; |
| goto out_free_dev; |
| } |
| |
| /* |
| * The card is now ready to go. If any errors occur during device |
| * registration we do not fail the whole card but rather proceed only |
| * with the ports we manage to register successfully. However we must |
| * register at least one net device. |
| */ |
| for (i = 0; i < bi->port_number; ++i) { |
| err = register_netdev(adapter->port[i].dev); |
| if (err) |
| CH_WARN("%s: cannot register net device %s, skipping\n", |
| pci_name(pdev), adapter->port[i].dev->name); |
| else { |
| /* |
| * Change the name we use for messages to the name of |
| * the first successfully registered interface. |
| */ |
| if (!adapter->registered_device_map) |
| adapter->name = adapter->port[i].dev->name; |
| |
| __set_bit(i, &adapter->registered_device_map); |
| } |
| } |
| if (!adapter->registered_device_map) { |
| CH_ERR("%s: could not register any net devices\n", |
| pci_name(pdev)); |
| goto out_release_adapter_res; |
| } |
| |
| printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name, |
| bi->desc, adapter->params.chip_revision, |
| adapter->params.pci.is_pcix ? "PCIX" : "PCI", |
| adapter->params.pci.speed, adapter->params.pci.width); |
| return 0; |
| |
| out_release_adapter_res: |
| t1_free_sw_modules(adapter); |
| out_free_dev: |
| if (adapter) { |
| if (adapter->regs) iounmap(adapter->regs); |
| for (i = bi->port_number - 1; i >= 0; --i) |
| if (adapter->port[i].dev) { |
| cxgb_proc_cleanup(adapter, proc_root_driver); |
| kfree(adapter->port[i].dev); |
| } |
| } |
| pci_release_regions(pdev); |
| out_disable_pdev: |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| static inline void t1_sw_reset(struct pci_dev *pdev) |
| { |
| pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3); |
| pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0); |
| } |
| |
| static void __devexit remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| if (dev) { |
| int i; |
| struct adapter *adapter = dev->priv; |
| |
| for_each_port(adapter, i) |
| if (test_bit(i, &adapter->registered_device_map)) |
| unregister_netdev(adapter->port[i].dev); |
| |
| t1_free_sw_modules(adapter); |
| iounmap(adapter->regs); |
| while (--i >= 0) |
| if (adapter->port[i].dev) { |
| cxgb_proc_cleanup(adapter, proc_root_driver); |
| kfree(adapter->port[i].dev); |
| } |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| t1_sw_reset(pdev); |
| } |
| } |
| |
| static struct pci_driver driver = { |
| .name = DRV_NAME, |
| .id_table = t1_pci_tbl, |
| .probe = init_one, |
| .remove = __devexit_p(remove_one), |
| }; |
| |
| static int __init t1_init_module(void) |
| { |
| return pci_module_init(&driver); |
| } |
| |
| static void __exit t1_cleanup_module(void) |
| { |
| pci_unregister_driver(&driver); |
| } |
| |
| module_init(t1_init_module); |
| module_exit(t1_cleanup_module); |