| /* |
| * linux/arch/m32r/kernel/sys_m32r.c |
| * |
| * This file contains various random system calls that |
| * have a non-standard calling sequence on the Linux/M32R platform. |
| * |
| * Taken from i386 version. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/sem.h> |
| #include <linux/msg.h> |
| #include <linux/shm.h> |
| #include <linux/stat.h> |
| #include <linux/syscalls.h> |
| #include <linux/mman.h> |
| #include <linux/file.h> |
| #include <linux/utsname.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/cachectl.h> |
| #include <asm/cacheflush.h> |
| #include <asm/ipc.h> |
| |
| /* |
| * sys_tas() - test-and-set |
| */ |
| asmlinkage int sys_tas(int *addr) |
| { |
| int oldval; |
| |
| if (!access_ok(VERIFY_WRITE, addr, sizeof (int))) |
| return -EFAULT; |
| |
| /* atomic operation: |
| * oldval = *addr; *addr = 1; |
| */ |
| __asm__ __volatile__ ( |
| DCACHE_CLEAR("%0", "r4", "%1") |
| " .fillinsn\n" |
| "1:\n" |
| " lock %0, @%1 -> unlock %2, @%1\n" |
| "2:\n" |
| /* NOTE: |
| * The m32r processor can accept interrupts only |
| * at the 32-bit instruction boundary. |
| * So, in the above code, the "unlock" instruction |
| * can be executed continuously after the "lock" |
| * instruction execution without any interruptions. |
| */ |
| ".section .fixup,\"ax\"\n" |
| " .balign 4\n" |
| "3: ldi %0, #%3\n" |
| " seth r14, #high(2b)\n" |
| " or3 r14, r14, #low(2b)\n" |
| " jmp r14\n" |
| ".previous\n" |
| ".section __ex_table,\"a\"\n" |
| " .balign 4\n" |
| " .long 1b,3b\n" |
| ".previous\n" |
| : "=&r" (oldval) |
| : "r" (addr), "r" (1), "i"(-EFAULT) |
| : "r14", "memory" |
| #ifdef CONFIG_CHIP_M32700_TS1 |
| , "r4" |
| #endif /* CONFIG_CHIP_M32700_TS1 */ |
| ); |
| |
| return oldval; |
| } |
| |
| /* |
| * sys_pipe() is the normal C calling standard for creating |
| * a pipe. It's not the way Unix traditionally does this, though. |
| */ |
| asmlinkage int |
| sys_pipe(unsigned long r0, unsigned long r1, unsigned long r2, |
| unsigned long r3, unsigned long r4, unsigned long r5, |
| unsigned long r6, struct pt_regs regs) |
| { |
| int fd[2]; |
| int error; |
| |
| error = do_pipe(fd); |
| if (!error) { |
| if (copy_to_user((void *)r0, (void *)fd, 2*sizeof(int))) |
| error = -EFAULT; |
| } |
| return error; |
| } |
| |
| asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, |
| unsigned long prot, unsigned long flags, |
| unsigned long fd, unsigned long pgoff) |
| { |
| int error = -EBADF; |
| struct file *file = NULL; |
| |
| flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); |
| if (!(flags & MAP_ANONYMOUS)) { |
| file = fget(fd); |
| if (!file) |
| goto out; |
| } |
| |
| down_write(¤t->mm->mmap_sem); |
| error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); |
| up_write(¤t->mm->mmap_sem); |
| |
| if (file) |
| fput(file); |
| out: |
| return error; |
| } |
| |
| /* |
| * sys_ipc() is the de-multiplexer for the SysV IPC calls.. |
| * |
| * This is really horribly ugly. |
| */ |
| asmlinkage int sys_ipc(uint call, int first, int second, |
| int third, void __user *ptr, long fifth) |
| { |
| int version, ret; |
| |
| version = call >> 16; /* hack for backward compatibility */ |
| call &= 0xffff; |
| |
| switch (call) { |
| case SEMOP: |
| return sys_semtimedop(first, (struct sembuf __user *)ptr, |
| second, NULL); |
| case SEMTIMEDOP: |
| return sys_semtimedop(first, (struct sembuf __user *)ptr, |
| second, (const struct timespec __user *)fifth); |
| case SEMGET: |
| return sys_semget (first, second, third); |
| case SEMCTL: { |
| union semun fourth; |
| if (!ptr) |
| return -EINVAL; |
| if (get_user(fourth.__pad, (void __user * __user *) ptr)) |
| return -EFAULT; |
| return sys_semctl (first, second, third, fourth); |
| } |
| |
| case MSGSND: |
| return sys_msgsnd (first, (struct msgbuf __user *) ptr, |
| second, third); |
| case MSGRCV: |
| switch (version) { |
| case 0: { |
| struct ipc_kludge tmp; |
| if (!ptr) |
| return -EINVAL; |
| |
| if (copy_from_user(&tmp, |
| (struct ipc_kludge __user *) ptr, |
| sizeof (tmp))) |
| return -EFAULT; |
| return sys_msgrcv (first, tmp.msgp, second, |
| tmp.msgtyp, third); |
| } |
| default: |
| return sys_msgrcv (first, |
| (struct msgbuf __user *) ptr, |
| second, fifth, third); |
| } |
| case MSGGET: |
| return sys_msgget ((key_t) first, second); |
| case MSGCTL: |
| return sys_msgctl (first, second, |
| (struct msqid_ds __user *) ptr); |
| case SHMAT: { |
| ulong raddr; |
| |
| if (!access_ok(VERIFY_WRITE, (ulong __user *) third, |
| sizeof(ulong))) |
| return -EFAULT; |
| ret = do_shmat (first, (char __user *) ptr, second, &raddr); |
| if (ret) |
| return ret; |
| return put_user (raddr, (ulong __user *) third); |
| } |
| case SHMDT: |
| return sys_shmdt ((char __user *)ptr); |
| case SHMGET: |
| return sys_shmget (first, second, third); |
| case SHMCTL: |
| return sys_shmctl (first, second, |
| (struct shmid_ds __user *) ptr); |
| default: |
| return -ENOSYS; |
| } |
| } |
| |
| asmlinkage int sys_uname(struct old_utsname * name) |
| { |
| int err; |
| if (!name) |
| return -EFAULT; |
| down_read(&uts_sem); |
| err=copy_to_user(name, &system_utsname, sizeof (*name)); |
| up_read(&uts_sem); |
| return err?-EFAULT:0; |
| } |
| |
| asmlinkage int sys_cacheflush(void *addr, int bytes, int cache) |
| { |
| /* This should flush more selectivly ... */ |
| _flush_cache_all(); |
| return 0; |
| } |
| |
| asmlinkage int sys_cachectl(char *addr, int nbytes, int op) |
| { |
| /* Not implemented yet. */ |
| return -ENOSYS; |
| } |
| |