| /* |
| * wl12xx SDIO routines |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| * Copyright (C) 2005 Texas Instruments Incorporated |
| * Copyright (C) 2008 Google Inc |
| * Copyright (C) 2009 Bob Copeland (me@bobcopeland.com) |
| */ |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/platform_device.h> |
| #include <linux/wl12xx.h> |
| #include <linux/irq.h> |
| |
| #include "wl1251.h" |
| |
| #ifndef SDIO_VENDOR_ID_TI |
| #define SDIO_VENDOR_ID_TI 0x104c |
| #endif |
| |
| #ifndef SDIO_DEVICE_ID_TI_WL1251 |
| #define SDIO_DEVICE_ID_TI_WL1251 0x9066 |
| #endif |
| |
| struct wl1251_sdio { |
| struct sdio_func *func; |
| u32 elp_val; |
| }; |
| |
| static struct wl12xx_platform_data *wl12xx_board_data; |
| |
| static struct sdio_func *wl_to_func(struct wl1251 *wl) |
| { |
| struct wl1251_sdio *wl_sdio = wl->if_priv; |
| return wl_sdio->func; |
| } |
| |
| static void wl1251_sdio_interrupt(struct sdio_func *func) |
| { |
| struct wl1251 *wl = sdio_get_drvdata(func); |
| |
| wl1251_debug(DEBUG_IRQ, "IRQ"); |
| |
| /* FIXME should be synchronous for sdio */ |
| ieee80211_queue_work(wl->hw, &wl->irq_work); |
| } |
| |
| static const struct sdio_device_id wl1251_devices[] = { |
| { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1251) }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(sdio, wl1251_devices); |
| |
| |
| static void wl1251_sdio_read(struct wl1251 *wl, int addr, |
| void *buf, size_t len) |
| { |
| int ret; |
| struct sdio_func *func = wl_to_func(wl); |
| |
| sdio_claim_host(func); |
| ret = sdio_memcpy_fromio(func, buf, addr, len); |
| if (ret) |
| wl1251_error("sdio read failed (%d)", ret); |
| sdio_release_host(func); |
| } |
| |
| static void wl1251_sdio_write(struct wl1251 *wl, int addr, |
| void *buf, size_t len) |
| { |
| int ret; |
| struct sdio_func *func = wl_to_func(wl); |
| |
| sdio_claim_host(func); |
| ret = sdio_memcpy_toio(func, addr, buf, len); |
| if (ret) |
| wl1251_error("sdio write failed (%d)", ret); |
| sdio_release_host(func); |
| } |
| |
| static void wl1251_sdio_read_elp(struct wl1251 *wl, int addr, u32 *val) |
| { |
| int ret = 0; |
| struct wl1251_sdio *wl_sdio = wl->if_priv; |
| struct sdio_func *func = wl_sdio->func; |
| |
| /* |
| * The hardware only supports RAW (read after write) access for |
| * reading, regular sdio_readb won't work here (it interprets |
| * the unused bits of CMD52 as write data even if we send read |
| * request). |
| */ |
| sdio_claim_host(func); |
| *val = sdio_writeb_readb(func, wl_sdio->elp_val, addr, &ret); |
| sdio_release_host(func); |
| |
| if (ret) |
| wl1251_error("sdio_readb failed (%d)", ret); |
| } |
| |
| static void wl1251_sdio_write_elp(struct wl1251 *wl, int addr, u32 val) |
| { |
| int ret = 0; |
| struct wl1251_sdio *wl_sdio = wl->if_priv; |
| struct sdio_func *func = wl_sdio->func; |
| |
| sdio_claim_host(func); |
| sdio_writeb(func, val, addr, &ret); |
| sdio_release_host(func); |
| |
| if (ret) |
| wl1251_error("sdio_writeb failed (%d)", ret); |
| else |
| wl_sdio->elp_val = val; |
| } |
| |
| static void wl1251_sdio_reset(struct wl1251 *wl) |
| { |
| } |
| |
| static void wl1251_sdio_enable_irq(struct wl1251 *wl) |
| { |
| struct sdio_func *func = wl_to_func(wl); |
| |
| sdio_claim_host(func); |
| sdio_claim_irq(func, wl1251_sdio_interrupt); |
| sdio_release_host(func); |
| } |
| |
| static void wl1251_sdio_disable_irq(struct wl1251 *wl) |
| { |
| struct sdio_func *func = wl_to_func(wl); |
| |
| sdio_claim_host(func); |
| sdio_release_irq(func); |
| sdio_release_host(func); |
| } |
| |
| /* Interrupts when using dedicated WLAN_IRQ pin */ |
| static irqreturn_t wl1251_line_irq(int irq, void *cookie) |
| { |
| struct wl1251 *wl = cookie; |
| |
| ieee80211_queue_work(wl->hw, &wl->irq_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void wl1251_enable_line_irq(struct wl1251 *wl) |
| { |
| return enable_irq(wl->irq); |
| } |
| |
| static void wl1251_disable_line_irq(struct wl1251 *wl) |
| { |
| return disable_irq(wl->irq); |
| } |
| |
| static void wl1251_sdio_set_power(bool enable) |
| { |
| } |
| |
| static struct wl1251_if_operations wl1251_sdio_ops = { |
| .read = wl1251_sdio_read, |
| .write = wl1251_sdio_write, |
| .write_elp = wl1251_sdio_write_elp, |
| .read_elp = wl1251_sdio_read_elp, |
| .reset = wl1251_sdio_reset, |
| }; |
| |
| static int wl1251_platform_probe(struct platform_device *pdev) |
| { |
| if (pdev->id != -1) { |
| wl1251_error("can only handle single device"); |
| return -ENODEV; |
| } |
| |
| wl12xx_board_data = pdev->dev.platform_data; |
| return 0; |
| } |
| |
| /* |
| * Dummy platform_driver for passing platform_data to this driver, |
| * until we have a way to pass this through SDIO subsystem or |
| * some other way. |
| */ |
| static struct platform_driver wl1251_platform_driver = { |
| .driver = { |
| .name = "wl1251_data", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wl1251_platform_probe, |
| }; |
| |
| static int wl1251_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| int ret; |
| struct wl1251 *wl; |
| struct ieee80211_hw *hw; |
| struct wl1251_sdio *wl_sdio; |
| |
| hw = wl1251_alloc_hw(); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| wl = hw->priv; |
| |
| wl_sdio = kzalloc(sizeof(*wl_sdio), GFP_KERNEL); |
| if (wl_sdio == NULL) { |
| ret = -ENOMEM; |
| goto out_free_hw; |
| } |
| |
| sdio_claim_host(func); |
| ret = sdio_enable_func(func); |
| if (ret) |
| goto release; |
| |
| sdio_set_block_size(func, 512); |
| sdio_release_host(func); |
| |
| SET_IEEE80211_DEV(hw, &func->dev); |
| wl_sdio->func = func; |
| wl->if_priv = wl_sdio; |
| wl->if_ops = &wl1251_sdio_ops; |
| wl->set_power = wl1251_sdio_set_power; |
| |
| if (wl12xx_board_data != NULL) { |
| wl->set_power = wl12xx_board_data->set_power; |
| wl->irq = wl12xx_board_data->irq; |
| wl->use_eeprom = wl12xx_board_data->use_eeprom; |
| } |
| |
| if (wl->irq) { |
| ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl); |
| if (ret < 0) { |
| wl1251_error("request_irq() failed: %d", ret); |
| goto disable; |
| } |
| |
| set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); |
| disable_irq(wl->irq); |
| |
| wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq; |
| wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq; |
| |
| wl1251_info("using dedicated interrupt line"); |
| } else { |
| wl1251_sdio_ops.enable_irq = wl1251_sdio_enable_irq; |
| wl1251_sdio_ops.disable_irq = wl1251_sdio_disable_irq; |
| |
| wl1251_info("using SDIO interrupt"); |
| } |
| |
| ret = wl1251_init_ieee80211(wl); |
| if (ret) |
| goto out_free_irq; |
| |
| sdio_set_drvdata(func, wl); |
| return ret; |
| |
| out_free_irq: |
| if (wl->irq) |
| free_irq(wl->irq, wl); |
| disable: |
| sdio_claim_host(func); |
| sdio_disable_func(func); |
| release: |
| sdio_release_host(func); |
| kfree(wl_sdio); |
| out_free_hw: |
| wl1251_free_hw(wl); |
| return ret; |
| } |
| |
| static void __devexit wl1251_sdio_remove(struct sdio_func *func) |
| { |
| struct wl1251 *wl = sdio_get_drvdata(func); |
| struct wl1251_sdio *wl_sdio = wl->if_priv; |
| |
| if (wl->irq) |
| free_irq(wl->irq, wl); |
| kfree(wl_sdio); |
| wl1251_free_hw(wl); |
| |
| sdio_claim_host(func); |
| sdio_release_irq(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| } |
| |
| static struct sdio_driver wl1251_sdio_driver = { |
| .name = "wl1251_sdio", |
| .id_table = wl1251_devices, |
| .probe = wl1251_sdio_probe, |
| .remove = __devexit_p(wl1251_sdio_remove), |
| }; |
| |
| static int __init wl1251_sdio_init(void) |
| { |
| int err; |
| |
| err = platform_driver_register(&wl1251_platform_driver); |
| if (err) { |
| wl1251_error("failed to register platform driver: %d", err); |
| return err; |
| } |
| |
| err = sdio_register_driver(&wl1251_sdio_driver); |
| if (err) |
| wl1251_error("failed to register sdio driver: %d", err); |
| return err; |
| } |
| |
| static void __exit wl1251_sdio_exit(void) |
| { |
| sdio_unregister_driver(&wl1251_sdio_driver); |
| platform_driver_unregister(&wl1251_platform_driver); |
| wl1251_notice("unloaded"); |
| } |
| |
| module_init(wl1251_sdio_init); |
| module_exit(wl1251_sdio_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>"); |