| /* |
| * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver |
| * |
| * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #ifndef _DVB_USB_CE6230_H_ |
| #define _DVB_USB_CE6230_H_ |
| |
| #define DVB_USB_LOG_PREFIX "ce6230" |
| #include "dvb-usb.h" |
| |
| #define deb_info(args...) dprintk(dvb_usb_ce6230_debug, 0x01, args) |
| #define deb_rc(args...) dprintk(dvb_usb_ce6230_debug, 0x02, args) |
| #define deb_xfer(args...) dprintk(dvb_usb_ce6230_debug, 0x04, args) |
| #define deb_reg(args...) dprintk(dvb_usb_ce6230_debug, 0x08, args) |
| #define deb_i2c(args...) dprintk(dvb_usb_ce6230_debug, 0x10, args) |
| #define deb_fw(args...) dprintk(dvb_usb_ce6230_debug, 0x20, args) |
| |
| #define ce6230_debug_dump(r, t, v, i, b, l, func) { \ |
| int loop_; \ |
| func("%02x %02x %02x %02x %02x %02x %02x %02x", \ |
| t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \ |
| if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ |
| func(" >>> "); \ |
| else \ |
| func(" <<< "); \ |
| for (loop_ = 0; loop_ < l; loop_++) \ |
| func("%02x ", b[loop_]); \ |
| func("\n");\ |
| } |
| |
| #define CE6230_USB_TIMEOUT 1000 |
| |
| struct req_t { |
| u8 cmd; /* [1] */ |
| u16 value; /* [2|3] */ |
| u16 index; /* [4|5] */ |
| u16 data_len; /* [6|7] */ |
| u8 *data; |
| }; |
| |
| enum ce6230_cmd { |
| CONFIG_READ = 0xd0, /* rd 0 (unclear) */ |
| UNKNOWN_WRITE = 0xc7, /* wr 7 (unclear) */ |
| I2C_READ = 0xd9, /* rd 9 (unclear) */ |
| I2C_WRITE = 0xca, /* wr a */ |
| DEMOD_READ = 0xdb, /* rd b */ |
| DEMOD_WRITE = 0xcc, /* wr c */ |
| REG_READ = 0xde, /* rd e */ |
| REG_WRITE = 0xcf, /* wr f */ |
| }; |
| |
| #endif |