blob: 548381c35bfd1573bf5886b648100e0d06a63f11 [file] [log] [blame]
/*
* Streamzap Remote Control driver
*
* Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
* Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
*
* This driver was based on the work of Greg Wickham and Adrian
* Dewhurst. It was substantially rewritten to support correct signal
* gaps and now maintains a delay buffer, which is used to present
* consistent timing behaviour to user space applications. Without the
* delay buffer an ugly hack would be required in lircd, which can
* cause sluggish signal decoding in certain situations.
*
* Ported to in-kernel ir-core interface by Jarod Wilson
*
* This driver is based on the USB skeleton driver packaged with the
* kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/input.h>
#include <media/ir-core.h>
#define DRIVER_VERSION "1.61"
#define DRIVER_NAME "streamzap"
#define DRIVER_DESC "Streamzap Remote Control driver"
#ifdef CONFIG_USB_DEBUG
static int debug = 1;
#else
static int debug;
#endif
#define USB_STREAMZAP_VENDOR_ID 0x0e9c
#define USB_STREAMZAP_PRODUCT_ID 0x0000
/* table of devices that work with this driver */
static struct usb_device_id streamzap_table[] = {
/* Streamzap Remote Control */
{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
/* Terminating entry */
{ }
};
MODULE_DEVICE_TABLE(usb, streamzap_table);
#define SZ_PULSE_MASK 0xf0
#define SZ_SPACE_MASK 0x0f
#define SZ_TIMEOUT 0xff
#define SZ_RESOLUTION 256
/* number of samples buffered */
#define SZ_BUF_LEN 128
/* from ir-rc5-sz-decoder.c */
#ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
#define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder")
#else
#define load_rc5_sz_decode() 0
#endif
enum StreamzapDecoderState {
PulseSpace,
FullPulse,
FullSpace,
IgnorePulse
};
/* structure to hold our device specific stuff */
struct streamzap_ir {
/* ir-core */
struct ir_dev_props *props;
/* core device info */
struct device *dev;
struct input_dev *idev;
/* usb */
struct usb_device *usbdev;
struct usb_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct urb *urb_in;
/* buffer & dma */
unsigned char *buf_in;
dma_addr_t dma_in;
unsigned int buf_in_len;
/* track what state we're in */
enum StreamzapDecoderState decoder_state;
/* tracks whether we are currently receiving some signal */
bool idle;
/* sum of signal lengths received since signal start */
unsigned long sum;
/* start time of signal; necessary for gap tracking */
struct timeval signal_last;
struct timeval signal_start;
bool timeout_enabled;
char name[128];
char phys[64];
};
/* local function prototypes */
static int streamzap_probe(struct usb_interface *interface,
const struct usb_device_id *id);
static void streamzap_disconnect(struct usb_interface *interface);
static void streamzap_callback(struct urb *urb);
static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
static int streamzap_resume(struct usb_interface *intf);
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver streamzap_driver = {
.name = DRIVER_NAME,
.probe = streamzap_probe,
.disconnect = streamzap_disconnect,
.suspend = streamzap_suspend,
.resume = streamzap_resume,
.id_table = streamzap_table,
};
static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
{
ir_raw_event_store(sz->idev, &rawir);
}
static void sz_push_full_pulse(struct streamzap_ir *sz,
unsigned char value)
{
DEFINE_IR_RAW_EVENT(rawir);
if (sz->idle) {
long deltv;
sz->signal_last = sz->signal_start;
do_gettimeofday(&sz->signal_start);
deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
rawir.pulse = false;
if (deltv > 15) {
/* really long time */
rawir.duration = IR_MAX_DURATION;
} else {
rawir.duration = (int)(deltv * 1000000 +
sz->signal_start.tv_usec -
sz->signal_last.tv_usec);
rawir.duration -= sz->sum;
rawir.duration *= 1000;
rawir.duration &= IR_MAX_DURATION;
}
dev_dbg(sz->dev, "ls %u\n", rawir.duration);
sz_push(sz, rawir);
sz->idle = false;
sz->sum = 0;
}
rawir.pulse = true;
rawir.duration = ((int) value) * SZ_RESOLUTION;
rawir.duration += SZ_RESOLUTION / 2;
sz->sum += rawir.duration;
rawir.duration *= 1000;
rawir.duration &= IR_MAX_DURATION;
dev_dbg(sz->dev, "p %u\n", rawir.duration);
sz_push(sz, rawir);
}
static void sz_push_half_pulse(struct streamzap_ir *sz,
unsigned char value)
{
sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
}
static void sz_push_full_space(struct streamzap_ir *sz,
unsigned char value)
{
DEFINE_IR_RAW_EVENT(rawir);
rawir.pulse = false;
rawir.duration = ((int) value) * SZ_RESOLUTION;
rawir.duration += SZ_RESOLUTION / 2;
sz->sum += rawir.duration;
rawir.duration *= 1000;
dev_dbg(sz->dev, "s %u\n", rawir.duration);
sz_push(sz, rawir);
}
static void sz_push_half_space(struct streamzap_ir *sz,
unsigned long value)
{
sz_push_full_space(sz, value & SZ_SPACE_MASK);
}
/**
* streamzap_callback - usb IRQ handler callback
*
* This procedure is invoked on reception of data from
* the usb remote.
*/
static void streamzap_callback(struct urb *urb)
{
struct streamzap_ir *sz;
unsigned int i;
int len;
static int timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
IR_MAX_DURATION) | 0x03000000);
if (!urb)
return;
sz = urb->context;
len = urb->actual_length;
switch (urb->status) {
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/*
* this urb is terminated, clean up.
* sz might already be invalid at this point
*/
dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
return;
default:
break;
}
dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
for (i = 0; i < len; i++) {
dev_dbg(sz->dev, "sz idx %d: %x\n",
i, (unsigned char)sz->buf_in[i]);
switch (sz->decoder_state) {
case PulseSpace:
if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
SZ_PULSE_MASK) {
sz->decoder_state = FullPulse;
continue;
} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
== SZ_SPACE_MASK) {
sz_push_half_pulse(sz, sz->buf_in[i]);
sz->decoder_state = FullSpace;
continue;
} else {
sz_push_half_pulse(sz, sz->buf_in[i]);
sz_push_half_space(sz, sz->buf_in[i]);
}
break;
case FullPulse:
sz_push_full_pulse(sz, sz->buf_in[i]);
sz->decoder_state = IgnorePulse;
break;
case FullSpace:
if (sz->buf_in[i] == SZ_TIMEOUT) {
DEFINE_IR_RAW_EVENT(rawir);
rawir.pulse = false;
rawir.duration = timeout;
sz->idle = true;
if (sz->timeout_enabled)
sz_push(sz, rawir);
ir_raw_event_handle(sz->idev);
} else {
sz_push_full_space(sz, sz->buf_in[i]);
}
sz->decoder_state = PulseSpace;
break;
case IgnorePulse:
if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
SZ_SPACE_MASK) {
sz->decoder_state = FullSpace;
continue;
}
sz_push_half_space(sz, sz->buf_in[i]);
sz->decoder_state = PulseSpace;
break;
}
}
usb_submit_urb(urb, GFP_ATOMIC);
return;
}
static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
{
struct input_dev *idev;
struct ir_dev_props *props;
struct device *dev = sz->dev;
int ret;
idev = input_allocate_device();
if (!idev) {
dev_err(dev, "remote input dev allocation failed\n");
goto idev_alloc_failed;
}
props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
if (!props) {
dev_err(dev, "remote ir dev props allocation failed\n");
goto props_alloc_failed;
}
snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
"Receiver (%04x:%04x)",
le16_to_cpu(sz->usbdev->descriptor.idVendor),
le16_to_cpu(sz->usbdev->descriptor.idProduct));
idev->name = sz->name;
usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
strlcat(sz->phys, "/input0", sizeof(sz->phys));
idev->phys = sz->phys;
props->priv = sz;
props->driver_type = RC_DRIVER_IR_RAW;
props->allowed_protos = IR_TYPE_ALL;
sz->props = props;
ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
if (ret < 0) {
dev_err(dev, "remote input device register failed\n");
goto irdev_failed;
}
return idev;
irdev_failed:
kfree(props);
props_alloc_failed:
input_free_device(idev);
idev_alloc_failed:
return NULL;
}
/**
* streamzap_probe
*
* Called by usb-core to associated with a candidate device
* On any failure the return value is the ERROR
* On success return 0
*/
static int __devinit streamzap_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *usbdev = interface_to_usbdev(intf);
struct usb_host_interface *iface_host;
struct streamzap_ir *sz = NULL;
char buf[63], name[128] = "";
int retval = -ENOMEM;
int pipe, maxp;
/* Allocate space for device driver specific data */
sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
if (!sz)
return -ENOMEM;
sz->usbdev = usbdev;
sz->interface = intf;
/* Check to ensure endpoint information matches requirements */
iface_host = intf->cur_altsetting;
if (iface_host->desc.bNumEndpoints != 1) {
dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
__func__, iface_host->desc.bNumEndpoints);
retval = -ENODEV;
goto free_sz;
}
sz->endpoint = &(iface_host->endpoint[0].desc);
if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
!= USB_DIR_IN) {
dev_err(&intf->dev, "%s: endpoint doesn't match input device "
"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
retval = -ENODEV;
goto free_sz;
}
if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_INT) {
dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
"02%02x\n", __func__, sz->endpoint->bmAttributes);
retval = -ENODEV;
goto free_sz;
}
pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
if (maxp == 0) {
dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
__func__);
retval = -ENODEV;
goto free_sz;
}
/* Allocate the USB buffer and IRQ URB */
sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
if (!sz->buf_in)
goto free_sz;
sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
if (!sz->urb_in)
goto free_buf_in;
sz->dev = &intf->dev;
sz->buf_in_len = maxp;
if (usbdev->descriptor.iManufacturer
&& usb_string(usbdev, usbdev->descriptor.iManufacturer,
buf, sizeof(buf)) > 0)
strlcpy(name, buf, sizeof(name));
if (usbdev->descriptor.iProduct
&& usb_string(usbdev, usbdev->descriptor.iProduct,
buf, sizeof(buf)) > 0)
snprintf(name + strlen(name), sizeof(name) - strlen(name),
" %s", buf);
sz->idev = streamzap_init_input_dev(sz);
if (!sz->idev)
goto input_dev_fail;
sz->idle = true;
sz->decoder_state = PulseSpace;
/* FIXME: don't yet have a way to set this */
sz->timeout_enabled = true;
#if 0
/* not yet supported, depends on patches from maxim */
/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
#endif
do_gettimeofday(&sz->signal_start);
/* Complete final initialisations */
usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
maxp, (usb_complete_t)streamzap_callback,
sz, sz->endpoint->bInterval);
sz->urb_in->transfer_dma = sz->dma_in;
sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
usb_set_intfdata(intf, sz);
if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
dev_err(sz->dev, "urb submit failed\n");
dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
usbdev->bus->busnum, usbdev->devnum);
/* Load the streamzap not-quite-rc5 decoder too */
load_rc5_sz_decode();
return 0;
input_dev_fail:
usb_free_urb(sz->urb_in);
free_buf_in:
usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
free_sz:
kfree(sz);
return retval;
}
/**
* streamzap_disconnect
*
* Called by the usb core when the device is removed from the system.
*
* This routine guarantees that the driver will not submit any more urbs
* by clearing dev->usbdev. It is also supposed to terminate any currently
* active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
* does not provide any way to do this.
*/
static void streamzap_disconnect(struct usb_interface *interface)
{
struct streamzap_ir *sz = usb_get_intfdata(interface);
struct usb_device *usbdev = interface_to_usbdev(interface);
usb_set_intfdata(interface, NULL);
if (!sz)
return;
sz->usbdev = NULL;
ir_input_unregister(sz->idev);
usb_kill_urb(sz->urb_in);
usb_free_urb(sz->urb_in);
usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
kfree(sz);
}
static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
{
struct streamzap_ir *sz = usb_get_intfdata(intf);
usb_kill_urb(sz->urb_in);
return 0;
}
static int streamzap_resume(struct usb_interface *intf)
{
struct streamzap_ir *sz = usb_get_intfdata(intf);
if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
dev_err(sz->dev, "Error sumbiting urb\n");
return -EIO;
}
return 0;
}
/**
* streamzap_init
*/
static int __init streamzap_init(void)
{
int ret;
/* register this driver with the USB subsystem */
ret = usb_register(&streamzap_driver);
if (ret < 0)
printk(KERN_ERR DRIVER_NAME ": usb register failed, "
"result = %d\n", ret);
return ret;
}
/**
* streamzap_exit
*/
static void __exit streamzap_exit(void)
{
usb_deregister(&streamzap_driver);
}
module_init(streamzap_init);
module_exit(streamzap_exit);
MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging messages");