| /* |
| * linux/arch/arm/mach-sa1100/time.c |
| * |
| * Copyright (C) 1998 Deborah Wallach. |
| * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com> |
| * |
| * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net> |
| * Rewritten: big cleanup, much simpler, better HZ accuracy. |
| * |
| */ |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/timex.h> |
| #include <linux/clockchips.h> |
| |
| #include <asm/mach/time.h> |
| #include <mach/hardware.h> |
| |
| #define MIN_OSCR_DELTA 2 |
| |
| static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *c = dev_id; |
| |
| /* Disarm the compare/match, signal the event. */ |
| OIER &= ~OIER_E0; |
| OSSR = OSSR_M0; |
| c->event_handler(c); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int |
| sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) |
| { |
| unsigned long next, oscr; |
| |
| OIER |= OIER_E0; |
| next = OSCR + delta; |
| OSMR0 = next; |
| oscr = OSCR; |
| |
| return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; |
| } |
| |
| static void |
| sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) |
| { |
| switch (mode) { |
| case CLOCK_EVT_MODE_ONESHOT: |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| OIER &= ~OIER_E0; |
| OSSR = OSSR_M0; |
| break; |
| |
| case CLOCK_EVT_MODE_RESUME: |
| case CLOCK_EVT_MODE_PERIODIC: |
| break; |
| } |
| } |
| |
| static struct clock_event_device ckevt_sa1100_osmr0 = { |
| .name = "osmr0", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| .shift = 32, |
| .rating = 200, |
| .set_next_event = sa1100_osmr0_set_next_event, |
| .set_mode = sa1100_osmr0_set_mode, |
| }; |
| |
| static cycle_t sa1100_read_oscr(struct clocksource *s) |
| { |
| return OSCR; |
| } |
| |
| static struct clocksource cksrc_sa1100_oscr = { |
| .name = "oscr", |
| .rating = 200, |
| .read = sa1100_read_oscr, |
| .mask = CLOCKSOURCE_MASK(32), |
| .shift = 20, |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| static struct irqaction sa1100_timer_irq = { |
| .name = "ost0", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = sa1100_ost0_interrupt, |
| .dev_id = &ckevt_sa1100_osmr0, |
| }; |
| |
| static void __init sa1100_timer_init(void) |
| { |
| OIER = 0; /* disable any timer interrupts */ |
| OSSR = 0xf; /* clear status on all timers */ |
| |
| ckevt_sa1100_osmr0.mult = |
| div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift); |
| ckevt_sa1100_osmr0.max_delta_ns = |
| clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0); |
| ckevt_sa1100_osmr0.min_delta_ns = |
| clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1; |
| ckevt_sa1100_osmr0.cpumask = cpumask_of(0); |
| |
| cksrc_sa1100_oscr.mult = |
| clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift); |
| |
| setup_irq(IRQ_OST0, &sa1100_timer_irq); |
| |
| clocksource_register(&cksrc_sa1100_oscr); |
| clockevents_register_device(&ckevt_sa1100_osmr0); |
| } |
| |
| #ifdef CONFIG_PM |
| unsigned long osmr[4], oier; |
| |
| static void sa1100_timer_suspend(void) |
| { |
| osmr[0] = OSMR0; |
| osmr[1] = OSMR1; |
| osmr[2] = OSMR2; |
| osmr[3] = OSMR3; |
| oier = OIER; |
| } |
| |
| static void sa1100_timer_resume(void) |
| { |
| OSSR = 0x0f; |
| OSMR0 = osmr[0]; |
| OSMR1 = osmr[1]; |
| OSMR2 = osmr[2]; |
| OSMR3 = osmr[3]; |
| OIER = oier; |
| |
| /* |
| * OSMR0 is the system timer: make sure OSCR is sufficiently behind |
| */ |
| OSCR = OSMR0 - LATCH; |
| } |
| #else |
| #define sa1100_timer_suspend NULL |
| #define sa1100_timer_resume NULL |
| #endif |
| |
| struct sys_timer sa1100_timer = { |
| .init = sa1100_timer_init, |
| .suspend = sa1100_timer_suspend, |
| .resume = sa1100_timer_resume, |
| }; |