| /* |
| * $Id: cx88-blackbird.c,v 1.26 2005/03/07 15:58:05 kraxel Exp $ |
| * |
| * Support for a cx23416 mpeg encoder via cx2388x host port. |
| * "blackbird" reference design. |
| * |
| * (c) 2004 Jelle Foks <jelle@foks.8m.com> |
| * (c) 2004 Gerd Knorr <kraxel@bytesex.org> |
| * |
| * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| |
| #include "cx88.h" |
| |
| MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards"); |
| MODULE_AUTHOR("Jelle Foks <jelle@foks.8m.com>"); |
| MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int mpegbufs = 8; |
| module_param(mpegbufs,int,0644); |
| MODULE_PARM_DESC(mpegbufs,"number of mpeg buffers, range 2-32"); |
| |
| static unsigned int debug = 0; |
| module_param(debug,int,0644); |
| MODULE_PARM_DESC(debug,"enable debug messages [blackbird]"); |
| |
| #define dprintk(level,fmt, arg...) if (debug >= level) \ |
| printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg) |
| |
| static LIST_HEAD(cx8802_devlist); |
| |
| /* ------------------------------------------------------------------ */ |
| |
| #define BLACKBIRD_FIRM_ENC_FILENAME "blackbird-fw-enc.bin" |
| #define BLACKBIRD_FIRM_IMAGE_SIZE 256*1024 |
| |
| /* defines below are from ivtv-driver.h */ |
| |
| #define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF |
| |
| /*Firmware API commands*/ |
| #define IVTV_API_ENC_PING_FW 0x00000080 |
| #define IVTV_API_ENC_GETVER 0x000000C4 |
| #define IVTV_API_ENC_HALT_FW 0x000000C3 |
| #define IVTV_API_STD_TIMEOUT 0x00010000 /*units??*/ |
| //#define IVTV_API_ASSIGN_PGM_INDEX_INFO 0x000000c7 |
| #define IVTV_API_ASSIGN_STREAM_TYPE 0x000000b9 |
| #define IVTV_API_ASSIGN_OUTPUT_PORT 0x000000bb |
| #define IVTV_API_ASSIGN_FRAMERATE 0x0000008f |
| #define IVTV_API_ASSIGN_FRAME_SIZE 0x00000091 |
| #define IVTV_API_ASSIGN_ASPECT_RATIO 0x00000099 |
| #define IVTV_API_ASSIGN_BITRATES 0x00000095 |
| #define IVTV_API_ASSIGN_GOP_PROPERTIES 0x00000097 |
| #define IVTV_API_ASSIGN_3_2_PULLDOWN 0x000000b1 |
| #define IVTV_API_ASSIGN_GOP_CLOSURE 0x000000c5 |
| #define IVTV_API_ASSIGN_AUDIO_PROPERTIES 0x000000bd |
| #define IVTV_API_ASSIGN_DNR_FILTER_MODE 0x0000009b |
| #define IVTV_API_ASSIGN_DNR_FILTER_PROPS 0x0000009d |
| #define IVTV_API_ASSIGN_CORING_LEVELS 0x0000009f |
| #define IVTV_API_ASSIGN_SPATIAL_FILTER_TYPE 0x000000a1 |
| #define IVTV_API_ASSIGN_FRAME_DROP_RATE 0x000000d0 |
| #define IVTV_API_ASSIGN_PLACEHOLDER 0x000000d8 |
| #define IVTV_API_MUTE_VIDEO 0x000000d9 |
| #define IVTV_API_MUTE_AUDIO 0x000000da |
| #define IVTV_API_INITIALIZE_INPUT 0x000000cd |
| #define IVTV_API_REFRESH_INPUT 0x000000d3 |
| #define IVTV_API_ASSIGN_NUM_VSYNC_LINES 0x000000d6 |
| #define IVTV_API_BEGIN_CAPTURE 0x00000081 |
| //#define IVTV_API_PAUSE_ENCODER 0x000000d2 |
| //#define IVTV_API_EVENT_NOTIFICATION 0x000000d5 |
| #define IVTV_API_END_CAPTURE 0x00000082 |
| |
| /* Registers */ |
| #define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8 /*| IVTV_REG_OFFSET*/) |
| #define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC /*| IVTV_REG_OFFSET*/) |
| #define IVTV_REG_SPU (0x9050 /*| IVTV_REG_OFFSET*/) |
| #define IVTV_REG_HW_BLOCKS (0x9054 /*| IVTV_REG_OFFSET*/) |
| #define IVTV_REG_VPU (0x9058 /*| IVTV_REG_OFFSET*/) |
| #define IVTV_REG_APU (0xA064 /*| IVTV_REG_OFFSET*/) |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static void host_setup(struct cx88_core *core) |
| { |
| /* toggle reset of the host */ |
| cx_write(MO_GPHST_SOFT_RST, 1); |
| udelay(100); |
| cx_write(MO_GPHST_SOFT_RST, 0); |
| udelay(100); |
| |
| /* host port setup */ |
| cx_write(MO_GPHST_WSC, 0x44444444U); |
| cx_write(MO_GPHST_XFR, 0); |
| cx_write(MO_GPHST_WDTH, 15); |
| cx_write(MO_GPHST_HDSHK, 0); |
| cx_write(MO_GPHST_MUX16, 0x44448888U); |
| cx_write(MO_GPHST_MODE, 0); |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| #define P1_MDATA0 0x390000 |
| #define P1_MDATA1 0x390001 |
| #define P1_MDATA2 0x390002 |
| #define P1_MDATA3 0x390003 |
| #define P1_MADDR2 0x390004 |
| #define P1_MADDR1 0x390005 |
| #define P1_MADDR0 0x390006 |
| #define P1_RDATA0 0x390008 |
| #define P1_RDATA1 0x390009 |
| #define P1_RDATA2 0x39000A |
| #define P1_RDATA3 0x39000B |
| #define P1_RADDR0 0x39000C |
| #define P1_RADDR1 0x39000D |
| #define P1_RRDWR 0x39000E |
| |
| static int wait_ready_gpio0_bit1(struct cx88_core *core, u32 state) |
| { |
| unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| u32 gpio0,need; |
| |
| need = state ? 2 : 0; |
| for (;;) { |
| gpio0 = cx_read(MO_GP0_IO) & 2; |
| if (need == gpio0) |
| return 0; |
| if (time_after(jiffies,timeout)) |
| return -1; |
| udelay(1); |
| } |
| } |
| |
| static int memory_write(struct cx88_core *core, u32 address, u32 value) |
| { |
| /* Warning: address is dword address (4 bytes) */ |
| cx_writeb(P1_MDATA0, (unsigned int)value); |
| cx_writeb(P1_MDATA1, (unsigned int)(value >> 8)); |
| cx_writeb(P1_MDATA2, (unsigned int)(value >> 16)); |
| cx_writeb(P1_MDATA3, (unsigned int)(value >> 24)); |
| cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) | 0x40); |
| cx_writeb(P1_MADDR1, (unsigned int)(address >> 8)); |
| cx_writeb(P1_MADDR0, (unsigned int)address); |
| cx_read(P1_MDATA0); |
| cx_read(P1_MADDR0); |
| |
| return wait_ready_gpio0_bit1(core,1); |
| } |
| |
| static int memory_read(struct cx88_core *core, u32 address, u32 *value) |
| { |
| int retval; |
| u32 val; |
| |
| /* Warning: address is dword address (4 bytes) */ |
| cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) & ~0xC0); |
| cx_writeb(P1_MADDR1, (unsigned int)(address >> 8)); |
| cx_writeb(P1_MADDR0, (unsigned int)address); |
| cx_read(P1_MADDR0); |
| |
| retval = wait_ready_gpio0_bit1(core,1); |
| |
| cx_writeb(P1_MDATA3, 0); |
| val = (unsigned char)cx_read(P1_MDATA3) << 24; |
| cx_writeb(P1_MDATA2, 0); |
| val |= (unsigned char)cx_read(P1_MDATA2) << 16; |
| cx_writeb(P1_MDATA1, 0); |
| val |= (unsigned char)cx_read(P1_MDATA1) << 8; |
| cx_writeb(P1_MDATA0, 0); |
| val |= (unsigned char)cx_read(P1_MDATA0); |
| |
| *value = val; |
| return retval; |
| } |
| |
| static int register_write(struct cx88_core *core, u32 address, u32 value) |
| { |
| cx_writeb(P1_RDATA0, (unsigned int)value); |
| cx_writeb(P1_RDATA1, (unsigned int)(value >> 8)); |
| cx_writeb(P1_RDATA2, (unsigned int)(value >> 16)); |
| cx_writeb(P1_RDATA3, (unsigned int)(value >> 24)); |
| cx_writeb(P1_RADDR0, (unsigned int)address); |
| cx_writeb(P1_RADDR1, (unsigned int)(address >> 8)); |
| cx_writeb(P1_RRDWR, 1); |
| cx_read(P1_RDATA0); |
| cx_read(P1_RADDR0); |
| |
| return wait_ready_gpio0_bit1(core,1); |
| } |
| |
| |
| static int register_read(struct cx88_core *core, u32 address, u32 *value) |
| { |
| int retval; |
| u32 val; |
| |
| cx_writeb(P1_RADDR0, (unsigned int)address); |
| cx_writeb(P1_RADDR1, (unsigned int)(address >> 8)); |
| cx_writeb(P1_RRDWR, 0); |
| cx_read(P1_RADDR0); |
| |
| retval = wait_ready_gpio0_bit1(core,1); |
| val = (unsigned char)cx_read(P1_RDATA0); |
| val |= (unsigned char)cx_read(P1_RDATA1) << 8; |
| val |= (unsigned char)cx_read(P1_RDATA2) << 16; |
| val |= (unsigned char)cx_read(P1_RDATA3) << 24; |
| |
| *value = val; |
| return retval; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| /* We don't need to call the API often, so using just one mailbox will probably suffice */ |
| static int blackbird_api_cmd(struct cx8802_dev *dev, u32 command, |
| u32 inputcnt, u32 outputcnt, ...) |
| { |
| unsigned long timeout; |
| u32 value, flag, retval; |
| int i; |
| va_list args; |
| va_start(args, outputcnt); |
| |
| dprintk(1,"%s: 0x%X\n", __FUNCTION__, command); |
| |
| /* this may not be 100% safe if we can't read any memory location |
| without side effects */ |
| memory_read(dev->core, dev->mailbox - 4, &value); |
| if (value != 0x12345678) { |
| dprintk(0, "Firmware and/or mailbox pointer not initialized or corrupted\n"); |
| return -1; |
| } |
| |
| memory_read(dev->core, dev->mailbox, &flag); |
| if (flag) { |
| dprintk(0, "ERROR: Mailbox appears to be in use (%x)\n", flag); |
| return -1; |
| } |
| |
| flag |= 1; /* tell 'em we're working on it */ |
| memory_write(dev->core, dev->mailbox, flag); |
| |
| /* write command + args + fill remaining with zeros */ |
| memory_write(dev->core, dev->mailbox + 1, command); /* command code */ |
| memory_write(dev->core, dev->mailbox + 3, IVTV_API_STD_TIMEOUT); /* timeout */ |
| for (i = 0; i < inputcnt ; i++) { |
| value = va_arg(args, int); |
| memory_write(dev->core, dev->mailbox + 4 + i, value); |
| dprintk(1, "API Input %d = %d\n", i, value); |
| } |
| for (; i < 16 ; i++) |
| memory_write(dev->core, dev->mailbox + 4 + i, 0); |
| |
| flag |= 3; /* tell 'em we're done writing */ |
| memory_write(dev->core, dev->mailbox, flag); |
| |
| /* wait for firmware to handle the API command */ |
| timeout = jiffies + msecs_to_jiffies(10); |
| for (;;) { |
| memory_read(dev->core, dev->mailbox, &flag); |
| if (0 != (flag & 4)) |
| break; |
| if (time_after(jiffies,timeout)) { |
| dprintk(0, "ERROR: API Mailbox timeout\n"); |
| return -1; |
| } |
| udelay(10); |
| } |
| |
| /* read output values */ |
| for (i = 0; i < outputcnt ; i++) { |
| int *vptr = va_arg(args, int *); |
| memory_read(dev->core, dev->mailbox + 4 + i, vptr); |
| dprintk(1, "API Output %d = %d\n", i, *vptr); |
| } |
| va_end(args); |
| |
| memory_read(dev->core, dev->mailbox + 2, &retval); |
| dprintk(1, "API result = %d\n",retval); |
| |
| flag = 0; |
| memory_write(dev->core, dev->mailbox, flag); |
| return retval; |
| } |
| |
| |
| static int blackbird_find_mailbox(struct cx8802_dev *dev) |
| { |
| u32 signature[4]={0x12345678, 0x34567812, 0x56781234, 0x78123456}; |
| int signaturecnt=0; |
| u32 value; |
| int i; |
| |
| for (i = 0; i < BLACKBIRD_FIRM_IMAGE_SIZE; i++) { |
| memory_read(dev->core, i, &value); |
| if (value == signature[signaturecnt]) |
| signaturecnt++; |
| else |
| signaturecnt = 0; |
| if (4 == signaturecnt) { |
| dprintk(1, "Mailbox signature found\n"); |
| return i+1; |
| } |
| } |
| dprintk(0, "Mailbox signature values not found!\n"); |
| return -1; |
| } |
| |
| static int blackbird_load_firmware(struct cx8802_dev *dev) |
| { |
| static const unsigned char magic[8] = { |
| 0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa |
| }; |
| const struct firmware *firmware; |
| int i, retval = 0; |
| u32 value = 0; |
| u32 checksum = 0; |
| u32 *dataptr; |
| |
| retval = register_write(dev->core, IVTV_REG_VPU, 0xFFFFFFED); |
| retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); |
| retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_REFRESH, 0x80000640); |
| retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); |
| msleep(1); |
| retval |= register_write(dev->core, IVTV_REG_APU, 0); |
| |
| if (retval < 0) |
| dprintk(0, "Error with register_write\n"); |
| |
| retval = request_firmware(&firmware, BLACKBIRD_FIRM_ENC_FILENAME, |
| &dev->pci->dev); |
| if (retval != 0) { |
| dprintk(0, "ERROR: Hotplug firmware request failed (%s).\n", |
| BLACKBIRD_FIRM_ENC_FILENAME); |
| dprintk(0, "Please fix your hotplug setup, the board will " |
| "not work without firmware loaded!\n"); |
| return -1; |
| } |
| |
| if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) { |
| dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n", |
| firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE); |
| return -1; |
| } |
| |
| if (0 != memcmp(firmware->data, magic, 8)) { |
| dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n"); |
| return -1; |
| } |
| |
| /* transfer to the chip */ |
| dprintk(1,"Loading firmware ...\n"); |
| dataptr = (u32*)firmware->data; |
| for (i = 0; i < (firmware->size >> 2); i++) { |
| value = *dataptr; |
| checksum += ~value; |
| memory_write(dev->core, i, value); |
| dataptr++; |
| } |
| |
| /* read back to verify with the checksum */ |
| for (i--; i >= 0; i--) { |
| memory_read(dev->core, i, &value); |
| checksum -= ~value; |
| } |
| if (checksum) { |
| dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n"); |
| return -1; |
| } |
| release_firmware(firmware); |
| dprintk(0, "Firmware upload successful.\n"); |
| |
| retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); |
| retval |= register_read(dev->core, IVTV_REG_SPU, &value); |
| retval |= register_write(dev->core, IVTV_REG_SPU, value & 0xFFFFFFFE); |
| msleep(1); |
| |
| retval |= register_read(dev->core, IVTV_REG_VPU, &value); |
| retval |= register_write(dev->core, IVTV_REG_VPU, value & 0xFFFFFFE8); |
| |
| if (retval < 0) |
| dprintk(0, "Error with register_write\n"); |
| return 0; |
| } |
| |
| static void blackbird_codec_settings(struct cx8802_dev *dev) |
| { |
| int bitrate_mode = 1; |
| int bitrate = 7500000; |
| int bitrate_peak = 7500000; |
| |
| /* assign stream type */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_STREAM_TYPE, 1, 0, 0); /* program stream */ |
| //blackbird_api_cmd(dev, IVTV_API_ASSIGN_STREAM_TYPE, 1, 0, 2); /* MPEG1 stream */ |
| //blackbird_api_cmd(dev, IVTV_API_ASSIGN_STREAM_TYPE, 1, 0, 3); /* PES A/V */ |
| //blackbird_api_cmd(dev, IVTV_API_ASSIGN_STREAM_TYPE, 1, 0, 10); /* DVD stream */ |
| |
| /* assign output port */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_OUTPUT_PORT, 1, 0, 1); /* 1 = Host */ |
| |
| /* assign framerate */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_FRAMERATE, 1, 0, 0); |
| |
| /* assign frame size */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_FRAME_SIZE, 2, 0, |
| dev->height, dev->width); |
| |
| /* assign aspect ratio */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_ASPECT_RATIO, 1, 0, 2); |
| |
| /* assign bitrates */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_BITRATES, 5, 0, |
| bitrate_mode, /* mode */ |
| bitrate, /* bps */ |
| bitrate_peak / 400, /* peak/400 */ |
| 0, 0x70); /* encoding buffer, ckennedy */ |
| |
| /* assign gop properties */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_GOP_PROPERTIES, 2, 0, 15, 3); |
| //blackbird_api_cmd(dev, IVTV_API_ASSIGN_GOP_PROPERTIES, 2, 0, 2, 1); |
| |
| /* assign 3 2 pulldown */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_3_2_PULLDOWN, 1, 0, 0); |
| |
| /* note: it's not necessary to set the samplerate, the mpeg encoder seems to autodetect/adjust */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_AUDIO_PROPERTIES, 1, 0, (2<<2) | (8<<4)); |
| |
| /* assign gop closure */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_GOP_CLOSURE, 1, 0, 0); |
| |
| /* assign audio properties */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_AUDIO_PROPERTIES, 1, 0, 0 | (2 << 2) | (14 << 4)); |
| |
| /* assign dnr filter mode */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_DNR_FILTER_MODE, 2, 0, 0, 0); |
| |
| /* assign dnr filter props*/ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_DNR_FILTER_PROPS, 2, 0, 0, 0); |
| |
| /* assign coring levels (luma_h, luma_l, chroma_h, chroma_l) */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_CORING_LEVELS, 4, 0, 0, 255, 0, 255); |
| |
| /* assign spatial filter type: luma_t: 1 = horiz_only, chroma_t: 1 = horiz_only */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_SPATIAL_FILTER_TYPE, 2, 0, 1, 1); |
| |
| /* assign frame drop rate */ |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_FRAME_DROP_RATE, 1, 0, 0); |
| } |
| |
| static int blackbird_initialize_codec(struct cx8802_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| int version; |
| int retval; |
| |
| dprintk(1,"Initialize codec\n"); |
| retval = blackbird_api_cmd(dev, IVTV_API_ENC_PING_FW, 0, 0); /* ping */ |
| if (retval < 0) { |
| /* ping was not successful, reset and upload firmware */ |
| cx_write(MO_SRST_IO, 0); /* SYS_RSTO=0 */ |
| msleep(1); |
| cx_write(MO_SRST_IO, 1); /* SYS_RSTO=1 */ |
| msleep(1); |
| retval = blackbird_load_firmware(dev); |
| if (retval < 0) |
| return retval; |
| |
| dev->mailbox = blackbird_find_mailbox(dev); |
| if (dev->mailbox < 0) |
| return -1; |
| |
| retval = blackbird_api_cmd(dev, IVTV_API_ENC_PING_FW, 0, 0); /* ping */ |
| if (retval < 0) { |
| dprintk(0, "ERROR: Firmware ping failed!\n"); |
| return -1; |
| } |
| |
| retval = blackbird_api_cmd(dev, IVTV_API_ENC_GETVER, 0, 1, &version); |
| if (retval < 0) { |
| dprintk(0, "ERROR: Firmware get encoder version failed!\n"); |
| return -1; |
| } |
| dprintk(0, "Firmware version is 0x%08x\n", version); |
| } |
| msleep(1); |
| |
| cx_write(MO_PINMUX_IO, 0x88); /* 656-8bit IO and enable MPEG parallel IO */ |
| cx_clear(MO_INPUT_FORMAT, 0x100); /* chroma subcarrier lock to normal? */ |
| cx_write(MO_VBOS_CONTROL, 0x84A00); /* no 656 mode, 8-bit pixels, disable VBI */ |
| cx_clear(MO_OUTPUT_FORMAT, 0x0008); /* Normal Y-limits to let the mpeg encoder sync */ |
| |
| #if 0 /* FIXME */ |
| set_scale(dev, 720, 480, V4L2_FIELD_INTERLACED); |
| #endif |
| blackbird_codec_settings(dev); |
| msleep(1); |
| |
| //blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0xef, 0xef); |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0xf0, 0xf0); |
| //blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0x180, 0x180); |
| blackbird_api_cmd(dev, IVTV_API_ASSIGN_PLACEHOLDER, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); |
| |
| blackbird_api_cmd(dev, IVTV_API_INITIALIZE_INPUT, 0, 0); /* initialize the video input */ |
| |
| msleep(1); |
| |
| blackbird_api_cmd(dev, IVTV_API_MUTE_VIDEO, 1, 0, 0); |
| msleep(1); |
| blackbird_api_cmd(dev, IVTV_API_MUTE_AUDIO, 1, 0, 0); |
| msleep(1); |
| |
| blackbird_api_cmd(dev, IVTV_API_BEGIN_CAPTURE, 2, 0, 0, 0x13); /* start capturing to the host interface */ |
| //blackbird_api_cmd(dev, IVTV_API_BEGIN_CAPTURE, 2, 0, 0, 0); /* start capturing to the host interface */ |
| msleep(1); |
| |
| blackbird_api_cmd(dev, IVTV_API_REFRESH_INPUT, 0,0); |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int bb_buf_setup(struct videobuf_queue *q, |
| unsigned int *count, unsigned int *size) |
| { |
| struct cx8802_fh *fh = q->priv_data; |
| |
| fh->dev->ts_packet_size = 512; |
| fh->dev->ts_packet_count = 100; |
| |
| *size = fh->dev->ts_packet_size * fh->dev->ts_packet_count; |
| if (0 == *count) |
| *count = mpegbufs; |
| if (*count < 2) |
| *count = 2; |
| if (*count > 32) |
| *count = 32; |
| return 0; |
| } |
| |
| static int |
| bb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct cx8802_fh *fh = q->priv_data; |
| return cx8802_buf_prepare(fh->dev, (struct cx88_buffer*)vb); |
| } |
| |
| static void |
| bb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) |
| { |
| struct cx8802_fh *fh = q->priv_data; |
| cx8802_buf_queue(fh->dev, (struct cx88_buffer*)vb); |
| } |
| |
| static void |
| bb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb) |
| { |
| struct cx8802_fh *fh = q->priv_data; |
| cx88_free_buffer(fh->dev->pci, (struct cx88_buffer*)vb); |
| } |
| |
| static struct videobuf_queue_ops blackbird_qops = { |
| .buf_setup = bb_buf_setup, |
| .buf_prepare = bb_buf_prepare, |
| .buf_queue = bb_buf_queue, |
| .buf_release = bb_buf_release, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int mpeg_do_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, void *arg) |
| { |
| struct cx8802_fh *fh = file->private_data; |
| struct cx8802_dev *dev = fh->dev; |
| |
| if (debug > 1) |
| cx88_print_ioctl(dev->core->name,cmd); |
| |
| switch (cmd) { |
| |
| /* --- capture ioctls ---------------------------------------- */ |
| case VIDIOC_ENUM_FMT: |
| { |
| struct v4l2_fmtdesc *f = arg; |
| int index; |
| |
| index = f->index; |
| if (index != 0) |
| return -EINVAL; |
| |
| memset(f,0,sizeof(*f)); |
| f->index = index; |
| strlcpy(f->description, "MPEG TS", sizeof(f->description)); |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| f->pixelformat = V4L2_PIX_FMT_MPEG; |
| return 0; |
| } |
| case VIDIOC_G_FMT: |
| case VIDIOC_S_FMT: |
| case VIDIOC_TRY_FMT: |
| { |
| /* FIXME -- quick'n'dirty for exactly one size ... */ |
| struct v4l2_format *f = arg; |
| |
| memset(f,0,sizeof(*f)); |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| f->fmt.pix.width = dev->width; |
| f->fmt.pix.height = dev->height; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.sizeimage = 1024 * 512 /* FIXME: BUFFER_SIZE */; |
| } |
| |
| /* --- streaming capture ------------------------------------- */ |
| case VIDIOC_REQBUFS: |
| return videobuf_reqbufs(&fh->mpegq, arg); |
| |
| case VIDIOC_QUERYBUF: |
| return videobuf_querybuf(&fh->mpegq, arg); |
| |
| case VIDIOC_QBUF: |
| return videobuf_qbuf(&fh->mpegq, arg); |
| |
| case VIDIOC_DQBUF: |
| return videobuf_dqbuf(&fh->mpegq, arg, |
| file->f_flags & O_NONBLOCK); |
| |
| case VIDIOC_STREAMON: |
| return videobuf_streamon(&fh->mpegq); |
| |
| case VIDIOC_STREAMOFF: |
| return videobuf_streamoff(&fh->mpegq); |
| |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int mpeg_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| return video_usercopy(inode, file, cmd, arg, mpeg_do_ioctl); |
| } |
| |
| static int mpeg_open(struct inode *inode, struct file *file) |
| { |
| int minor = iminor(inode); |
| struct cx8802_dev *h,*dev = NULL; |
| struct cx8802_fh *fh; |
| struct list_head *list; |
| |
| list_for_each(list,&cx8802_devlist) { |
| h = list_entry(list, struct cx8802_dev, devlist); |
| if (h->mpeg_dev->minor == minor) |
| dev = h; |
| } |
| if (NULL == dev) |
| return -ENODEV; |
| |
| if (blackbird_initialize_codec(dev) < 0) |
| return -EINVAL; |
| dprintk(1,"open minor=%d\n",minor); |
| |
| /* allocate + initialize per filehandle data */ |
| fh = kmalloc(sizeof(*fh),GFP_KERNEL); |
| if (NULL == fh) |
| return -ENOMEM; |
| memset(fh,0,sizeof(*fh)); |
| file->private_data = fh; |
| fh->dev = dev; |
| |
| /* FIXME: locking against other video device */ |
| cx88_set_scale(dev->core, dev->width, dev->height, |
| V4L2_FIELD_INTERLACED); |
| |
| videobuf_queue_init(&fh->mpegq, &blackbird_qops, |
| dev->pci, &dev->slock, |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| V4L2_FIELD_TOP, |
| sizeof(struct cx88_buffer), |
| fh); |
| return 0; |
| } |
| |
| static int mpeg_release(struct inode *inode, struct file *file) |
| { |
| struct cx8802_fh *fh = file->private_data; |
| |
| blackbird_api_cmd(fh->dev, IVTV_API_END_CAPTURE, 3, 0, 1, 0, 0x13); |
| |
| /* stop mpeg capture */ |
| if (fh->mpegq.streaming) |
| videobuf_streamoff(&fh->mpegq); |
| if (fh->mpegq.reading) |
| videobuf_read_stop(&fh->mpegq); |
| |
| videobuf_mmap_free(&fh->mpegq); |
| file->private_data = NULL; |
| kfree(fh); |
| return 0; |
| } |
| |
| static ssize_t |
| mpeg_read(struct file *file, char __user *data, size_t count, loff_t *ppos) |
| { |
| struct cx8802_fh *fh = file->private_data; |
| |
| return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0, |
| file->f_flags & O_NONBLOCK); |
| } |
| |
| static unsigned int |
| mpeg_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| struct cx8802_fh *fh = file->private_data; |
| |
| return videobuf_poll_stream(file, &fh->mpegq, wait); |
| } |
| |
| static int |
| mpeg_mmap(struct file *file, struct vm_area_struct * vma) |
| { |
| struct cx8802_fh *fh = file->private_data; |
| |
| return videobuf_mmap_mapper(&fh->mpegq, vma); |
| } |
| |
| static struct file_operations mpeg_fops = |
| { |
| .owner = THIS_MODULE, |
| .open = mpeg_open, |
| .release = mpeg_release, |
| .read = mpeg_read, |
| .poll = mpeg_poll, |
| .mmap = mpeg_mmap, |
| .ioctl = mpeg_ioctl, |
| .llseek = no_llseek, |
| }; |
| |
| static struct video_device cx8802_mpeg_template = |
| { |
| .name = "cx8802", |
| .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES|VID_TYPE_MPEG_ENCODER, |
| .hardware = 0, |
| .fops = &mpeg_fops, |
| .minor = -1, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static void blackbird_unregister_video(struct cx8802_dev *dev) |
| { |
| if (dev->mpeg_dev) { |
| if (-1 != dev->mpeg_dev->minor) |
| video_unregister_device(dev->mpeg_dev); |
| else |
| video_device_release(dev->mpeg_dev); |
| dev->mpeg_dev = NULL; |
| } |
| } |
| |
| static int blackbird_register_video(struct cx8802_dev *dev) |
| { |
| int err; |
| |
| dev->mpeg_dev = cx88_vdev_init(dev->core,dev->pci, |
| &cx8802_mpeg_template,"mpeg"); |
| err = video_register_device(dev->mpeg_dev,VFL_TYPE_GRABBER, -1); |
| if (err < 0) { |
| printk(KERN_INFO "%s/2: can't register mpeg device\n", |
| dev->core->name); |
| return err; |
| } |
| printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n", |
| dev->core->name,dev->mpeg_dev->minor & 0x1f); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------- */ |
| |
| static int __devinit blackbird_probe(struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| struct cx8802_dev *dev; |
| struct cx88_core *core; |
| int err; |
| |
| /* general setup */ |
| core = cx88_core_get(pci_dev); |
| if (NULL == core) |
| return -EINVAL; |
| |
| err = -ENODEV; |
| if (!cx88_boards[core->board].blackbird) |
| goto fail_core; |
| |
| err = -ENOMEM; |
| dev = kmalloc(sizeof(*dev),GFP_KERNEL); |
| if (NULL == dev) |
| goto fail_core; |
| memset(dev,0,sizeof(*dev)); |
| dev->pci = pci_dev; |
| dev->core = core; |
| dev->width = 720; |
| dev->height = 480; |
| |
| err = cx8802_init_common(dev); |
| if (0 != err) |
| goto fail_free; |
| |
| /* blackbird stuff */ |
| printk("%s/2: cx23416 based mpeg encoder (blackbird reference design)\n", |
| core->name); |
| host_setup(dev->core); |
| |
| list_add_tail(&dev->devlist,&cx8802_devlist); |
| blackbird_register_video(dev); |
| return 0; |
| |
| fail_free: |
| kfree(dev); |
| fail_core: |
| cx88_core_put(core,pci_dev); |
| return err; |
| } |
| |
| static void __devexit blackbird_remove(struct pci_dev *pci_dev) |
| { |
| struct cx8802_dev *dev = pci_get_drvdata(pci_dev); |
| |
| /* blackbird */ |
| blackbird_unregister_video(dev); |
| list_del(&dev->devlist); |
| |
| /* common */ |
| cx8802_fini_common(dev); |
| cx88_core_put(dev->core,dev->pci); |
| kfree(dev); |
| } |
| |
| static struct pci_device_id cx8802_pci_tbl[] = { |
| { |
| .vendor = 0x14f1, |
| .device = 0x8802, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| },{ |
| /* --- end of list --- */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); |
| |
| static struct pci_driver blackbird_pci_driver = { |
| .name = "cx88-blackbird", |
| .id_table = cx8802_pci_tbl, |
| .probe = blackbird_probe, |
| .remove = __devexit_p(blackbird_remove), |
| .suspend = cx8802_suspend_common, |
| .resume = cx8802_resume_common, |
| }; |
| |
| static int blackbird_init(void) |
| { |
| printk(KERN_INFO "cx2388x blackbird driver version %d.%d.%d loaded\n", |
| (CX88_VERSION_CODE >> 16) & 0xff, |
| (CX88_VERSION_CODE >> 8) & 0xff, |
| CX88_VERSION_CODE & 0xff); |
| #ifdef SNAPSHOT |
| printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", |
| SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); |
| #endif |
| return pci_register_driver(&blackbird_pci_driver); |
| } |
| |
| static void blackbird_fini(void) |
| { |
| pci_unregister_driver(&blackbird_pci_driver); |
| } |
| |
| module_init(blackbird_init); |
| module_exit(blackbird_fini); |
| |
| /* ----------------------------------------------------------- */ |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |