| /* |
| * Copyright (c) 2011 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| /* ***** SDIO interface chip backplane handle functions ***** */ |
| |
| #include <linux/types.h> |
| #include <linux/netdevice.h> |
| #include <linux/mmc/card.h> |
| #include <linux/ssb/ssb_regs.h> |
| #include <linux/bcma/bcma.h> |
| |
| #include <chipcommon.h> |
| #include <brcm_hw_ids.h> |
| #include <brcmu_wifi.h> |
| #include <brcmu_utils.h> |
| #include <soc.h> |
| #include "dhd_dbg.h" |
| #include "sdio_host.h" |
| #include "sdio_chip.h" |
| |
| /* chip core base & ramsize */ |
| /* bcm4329 */ |
| /* SDIO device core, ID 0x829 */ |
| #define BCM4329_CORE_BUS_BASE 0x18011000 |
| /* internal memory core, ID 0x80e */ |
| #define BCM4329_CORE_SOCRAM_BASE 0x18003000 |
| /* ARM Cortex M3 core, ID 0x82a */ |
| #define BCM4329_CORE_ARM_BASE 0x18002000 |
| #define BCM4329_RAMSIZE 0x48000 |
| |
| /* bcm43143 */ |
| /* SDIO device core */ |
| #define BCM43143_CORE_BUS_BASE 0x18002000 |
| /* internal memory core */ |
| #define BCM43143_CORE_SOCRAM_BASE 0x18004000 |
| /* ARM Cortex M3 core, ID 0x82a */ |
| #define BCM43143_CORE_ARM_BASE 0x18003000 |
| #define BCM43143_RAMSIZE 0x70000 |
| |
| #define SBCOREREV(sbidh) \ |
| ((((sbidh) & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT) | \ |
| ((sbidh) & SSB_IDHIGH_RCLO)) |
| |
| /* SOC Interconnect types (aka chip types) */ |
| #define SOCI_SB 0 |
| #define SOCI_AI 1 |
| |
| /* EROM CompIdentB */ |
| #define CIB_REV_MASK 0xff000000 |
| #define CIB_REV_SHIFT 24 |
| |
| /* ARM CR4 core specific control flag bits */ |
| #define ARMCR4_BCMA_IOCTL_CPUHALT 0x0020 |
| |
| #define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu)) |
| /* SDIO Pad drive strength to select value mappings */ |
| struct sdiod_drive_str { |
| u8 strength; /* Pad Drive Strength in mA */ |
| u8 sel; /* Chip-specific select value */ |
| }; |
| /* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */ |
| static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = { |
| {32, 0x6}, |
| {26, 0x7}, |
| {22, 0x4}, |
| {16, 0x5}, |
| {12, 0x2}, |
| {8, 0x3}, |
| {4, 0x0}, |
| {0, 0x1} |
| }; |
| |
| /* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */ |
| static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { |
| {16, 0x7}, |
| {12, 0x5}, |
| {8, 0x3}, |
| {4, 0x1} |
| }; |
| |
| u8 |
| brcmf_sdio_chip_getinfidx(struct chip_info *ci, u16 coreid) |
| { |
| u8 idx; |
| |
| for (idx = 0; idx < BRCMF_MAX_CORENUM; idx++) |
| if (coreid == ci->c_inf[idx].id) |
| return idx; |
| |
| return BRCMF_MAX_CORENUM; |
| } |
| |
| static u32 |
| brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid) |
| { |
| u32 regdata; |
| u8 idx; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbidhigh), |
| NULL); |
| return SBCOREREV(regdata); |
| } |
| |
| static u32 |
| brcmf_sdio_ai_corerev(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid) |
| { |
| u8 idx; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| |
| return (ci->c_inf[idx].cib & CIB_REV_MASK) >> CIB_REV_SHIFT; |
| } |
| |
| static bool |
| brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid) |
| { |
| u32 regdata; |
| u8 idx; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbtmstatelow), |
| NULL); |
| regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT | |
| SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK); |
| return (SSB_TMSLOW_CLOCK == regdata); |
| } |
| |
| static bool |
| brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid) |
| { |
| u32 regdata; |
| u8 idx; |
| bool ret; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| |
| regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, |
| NULL); |
| ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK; |
| |
| regdata = brcmf_sdio_regrl(sdiodev, |
| ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, |
| NULL); |
| ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0); |
| |
| return ret; |
| } |
| |
| static void |
| brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid, u32 core_bits) |
| { |
| u32 regdata, base; |
| u8 idx; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| base = ci->c_inf[idx].base; |
| |
| regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); |
| if (regdata & SSB_TMSLOW_RESET) |
| return; |
| |
| regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); |
| if ((regdata & SSB_TMSLOW_CLOCK) != 0) { |
| /* |
| * set target reject and spin until busy is clear |
| * (preserve core-specific bits) |
| */ |
| regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), |
| NULL); |
| brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), |
| regdata | SSB_TMSLOW_REJECT, NULL); |
| |
| regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), |
| NULL); |
| udelay(1); |
| SPINWAIT((brcmf_sdio_regrl(sdiodev, |
| CORE_SB(base, sbtmstatehigh), |
| NULL) & |
| SSB_TMSHIGH_BUSY), 100000); |
| |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(base, sbtmstatehigh), |
| NULL); |
| if (regdata & SSB_TMSHIGH_BUSY) |
| brcmf_err("core state still busy\n"); |
| |
| regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), |
| NULL); |
| if (regdata & SSB_IDLOW_INITIATOR) { |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(base, sbimstate), |
| NULL); |
| regdata |= SSB_IMSTATE_REJECT; |
| brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), |
| regdata, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(base, sbimstate), |
| NULL); |
| udelay(1); |
| SPINWAIT((brcmf_sdio_regrl(sdiodev, |
| CORE_SB(base, sbimstate), |
| NULL) & |
| SSB_IMSTATE_BUSY), 100000); |
| } |
| |
| /* set reset and reject while enabling the clocks */ |
| regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | |
| SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET; |
| brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), |
| regdata, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbtmstatelow), |
| NULL); |
| udelay(10); |
| |
| /* clear the initiator reject bit */ |
| regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(base, sbidlow), |
| NULL); |
| if (regdata & SSB_IDLOW_INITIATOR) { |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(base, sbimstate), |
| NULL); |
| regdata &= ~SSB_IMSTATE_REJECT; |
| brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbimstate), |
| regdata, NULL); |
| } |
| } |
| |
| /* leave reset and reject asserted */ |
| brcmf_sdio_regwl(sdiodev, CORE_SB(base, sbtmstatelow), |
| (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL); |
| udelay(1); |
| } |
| |
| static void |
| brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid, u32 core_bits) |
| { |
| u8 idx; |
| u32 regdata; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| |
| /* if core is already in reset, just return */ |
| regdata = brcmf_sdio_regrl(sdiodev, |
| ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, |
| NULL); |
| if ((regdata & BCMA_RESET_CTL_RESET) != 0) |
| return; |
| |
| /* ensure no pending backplane operation |
| * 300uc should be sufficient for backplane ops to be finish |
| * extra 10ms is taken into account for firmware load stage |
| * after 10300us carry on disabling the core anyway |
| */ |
| SPINWAIT(brcmf_sdio_regrl(sdiodev, |
| ci->c_inf[idx].wrapbase+BCMA_RESET_ST, |
| NULL), 10300); |
| regdata = brcmf_sdio_regrl(sdiodev, |
| ci->c_inf[idx].wrapbase+BCMA_RESET_ST, |
| NULL); |
| if (regdata) |
| brcmf_err("disabling core 0x%x with reset status %x\n", |
| coreid, regdata); |
| |
| brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, |
| BCMA_RESET_CTL_RESET, NULL); |
| udelay(1); |
| |
| brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, |
| core_bits, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, |
| NULL); |
| usleep_range(10, 20); |
| |
| } |
| |
| static void |
| brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid, u32 core_bits) |
| { |
| u32 regdata; |
| u8 idx; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| |
| /* |
| * Must do the disable sequence first to work for |
| * arbitrary current core state. |
| */ |
| brcmf_sdio_sb_coredisable(sdiodev, ci, coreid, 0); |
| |
| /* |
| * Now do the initialization sequence. |
| * set reset while enabling the clock and |
| * forcing them on throughout the core |
| */ |
| brcmf_sdio_regwl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbtmstatelow), |
| SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET, |
| NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbtmstatelow), |
| NULL); |
| udelay(1); |
| |
| /* clear any serror */ |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), |
| NULL); |
| if (regdata & SSB_TMSHIGH_SERR) |
| brcmf_sdio_regwl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), |
| 0, NULL); |
| |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbimstate), |
| NULL); |
| if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) |
| brcmf_sdio_regwl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbimstate), |
| regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO), |
| NULL); |
| |
| /* clear reset and allow it to propagate throughout the core */ |
| brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), |
| SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbtmstatelow), |
| NULL); |
| udelay(1); |
| |
| /* leave clock enabled */ |
| brcmf_sdio_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), |
| SSB_TMSLOW_CLOCK, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_SB(ci->c_inf[idx].base, sbtmstatelow), |
| NULL); |
| udelay(1); |
| } |
| |
| static void |
| brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u16 coreid, u32 core_bits) |
| { |
| u8 idx; |
| u32 regdata; |
| |
| idx = brcmf_sdio_chip_getinfidx(ci, coreid); |
| |
| /* must disable first to work for arbitrary current core state */ |
| brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, core_bits); |
| |
| /* now do initialization sequence */ |
| brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, |
| core_bits | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, |
| NULL); |
| brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, |
| 0, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, |
| ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, |
| NULL); |
| udelay(1); |
| |
| brcmf_sdio_regwl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, |
| core_bits | BCMA_IOCTL_CLK, NULL); |
| regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, |
| NULL); |
| udelay(1); |
| } |
| |
| #ifdef DEBUG |
| /* safety check for chipinfo */ |
| static int brcmf_sdio_chip_cichk(struct chip_info *ci) |
| { |
| u8 core_idx; |
| |
| /* check RAM core presence for ARM CM3 core */ |
| core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3); |
| if (BRCMF_MAX_CORENUM != core_idx) { |
| core_idx = brcmf_sdio_chip_getinfidx(ci, |
| BCMA_CORE_INTERNAL_MEM); |
| if (BRCMF_MAX_CORENUM == core_idx) { |
| brcmf_err("RAM core not provided with ARM CM3 core\n"); |
| return -ENODEV; |
| } |
| } |
| |
| /* check RAM base for ARM CR4 core */ |
| core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4); |
| if (BRCMF_MAX_CORENUM != core_idx) { |
| if (ci->rambase == 0) { |
| brcmf_err("RAM base not provided with ARM CR4 core\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| return 0; |
| } |
| #else /* DEBUG */ |
| static inline int brcmf_sdio_chip_cichk(struct chip_info *ci) |
| { |
| return 0; |
| } |
| #endif |
| |
| static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u32 regs) |
| { |
| u32 regdata; |
| int ret; |
| |
| /* Get CC core rev |
| * Chipid is assume to be at offset 0 from regs arg |
| * For different chiptypes or old sdio hosts w/o chipcommon, |
| * other ways of recognition should be added here. |
| */ |
| ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON; |
| ci->c_inf[0].base = regs; |
| regdata = brcmf_sdio_regrl(sdiodev, |
| CORE_CC_REG(ci->c_inf[0].base, chipid), |
| NULL); |
| ci->chip = regdata & CID_ID_MASK; |
| ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT; |
| ci->socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT; |
| |
| brcmf_dbg(INFO, "chipid=0x%x chiprev=%d\n", ci->chip, ci->chiprev); |
| |
| /* Address of cores for new chips should be added here */ |
| switch (ci->chip) { |
| case BCM43143_CHIP_ID: |
| ci->c_inf[0].wrapbase = ci->c_inf[0].base + 0x00100000; |
| ci->c_inf[0].cib = 0x2b000000; |
| ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; |
| ci->c_inf[1].base = BCM43143_CORE_BUS_BASE; |
| ci->c_inf[1].wrapbase = ci->c_inf[1].base + 0x00100000; |
| ci->c_inf[1].cib = 0x18000000; |
| ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; |
| ci->c_inf[2].base = BCM43143_CORE_SOCRAM_BASE; |
| ci->c_inf[2].wrapbase = ci->c_inf[2].base + 0x00100000; |
| ci->c_inf[2].cib = 0x14000000; |
| ci->c_inf[3].id = BCMA_CORE_ARM_CM3; |
| ci->c_inf[3].base = BCM43143_CORE_ARM_BASE; |
| ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000; |
| ci->c_inf[3].cib = 0x07000000; |
| ci->ramsize = BCM43143_RAMSIZE; |
| break; |
| case BCM43241_CHIP_ID: |
| ci->c_inf[0].wrapbase = 0x18100000; |
| ci->c_inf[0].cib = 0x2a084411; |
| ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; |
| ci->c_inf[1].base = 0x18002000; |
| ci->c_inf[1].wrapbase = 0x18102000; |
| ci->c_inf[1].cib = 0x0e004211; |
| ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; |
| ci->c_inf[2].base = 0x18004000; |
| ci->c_inf[2].wrapbase = 0x18104000; |
| ci->c_inf[2].cib = 0x14080401; |
| ci->c_inf[3].id = BCMA_CORE_ARM_CM3; |
| ci->c_inf[3].base = 0x18003000; |
| ci->c_inf[3].wrapbase = 0x18103000; |
| ci->c_inf[3].cib = 0x07004211; |
| ci->ramsize = 0x90000; |
| break; |
| case BCM4329_CHIP_ID: |
| ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; |
| ci->c_inf[1].base = BCM4329_CORE_BUS_BASE; |
| ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; |
| ci->c_inf[2].base = BCM4329_CORE_SOCRAM_BASE; |
| ci->c_inf[3].id = BCMA_CORE_ARM_CM3; |
| ci->c_inf[3].base = BCM4329_CORE_ARM_BASE; |
| ci->ramsize = BCM4329_RAMSIZE; |
| break; |
| case BCM4330_CHIP_ID: |
| ci->c_inf[0].wrapbase = 0x18100000; |
| ci->c_inf[0].cib = 0x27004211; |
| ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; |
| ci->c_inf[1].base = 0x18002000; |
| ci->c_inf[1].wrapbase = 0x18102000; |
| ci->c_inf[1].cib = 0x07004211; |
| ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; |
| ci->c_inf[2].base = 0x18004000; |
| ci->c_inf[2].wrapbase = 0x18104000; |
| ci->c_inf[2].cib = 0x0d080401; |
| ci->c_inf[3].id = BCMA_CORE_ARM_CM3; |
| ci->c_inf[3].base = 0x18003000; |
| ci->c_inf[3].wrapbase = 0x18103000; |
| ci->c_inf[3].cib = 0x03004211; |
| ci->ramsize = 0x48000; |
| break; |
| case BCM4334_CHIP_ID: |
| ci->c_inf[0].wrapbase = 0x18100000; |
| ci->c_inf[0].cib = 0x29004211; |
| ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; |
| ci->c_inf[1].base = 0x18002000; |
| ci->c_inf[1].wrapbase = 0x18102000; |
| ci->c_inf[1].cib = 0x0d004211; |
| ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; |
| ci->c_inf[2].base = 0x18004000; |
| ci->c_inf[2].wrapbase = 0x18104000; |
| ci->c_inf[2].cib = 0x13080401; |
| ci->c_inf[3].id = BCMA_CORE_ARM_CM3; |
| ci->c_inf[3].base = 0x18003000; |
| ci->c_inf[3].wrapbase = 0x18103000; |
| ci->c_inf[3].cib = 0x07004211; |
| ci->ramsize = 0x80000; |
| break; |
| case BCM4335_CHIP_ID: |
| ci->c_inf[0].wrapbase = 0x18100000; |
| ci->c_inf[0].cib = 0x2b084411; |
| ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; |
| ci->c_inf[1].base = 0x18005000; |
| ci->c_inf[1].wrapbase = 0x18105000; |
| ci->c_inf[1].cib = 0x0f004211; |
| ci->c_inf[2].id = BCMA_CORE_ARM_CR4; |
| ci->c_inf[2].base = 0x18002000; |
| ci->c_inf[2].wrapbase = 0x18102000; |
| ci->c_inf[2].cib = 0x01084411; |
| ci->ramsize = 0xc0000; |
| ci->rambase = 0x180000; |
| break; |
| default: |
| brcmf_err("chipid 0x%x is not supported\n", ci->chip); |
| return -ENODEV; |
| } |
| |
| ret = brcmf_sdio_chip_cichk(ci); |
| if (ret) |
| return ret; |
| |
| switch (ci->socitype) { |
| case SOCI_SB: |
| ci->iscoreup = brcmf_sdio_sb_iscoreup; |
| ci->corerev = brcmf_sdio_sb_corerev; |
| ci->coredisable = brcmf_sdio_sb_coredisable; |
| ci->resetcore = brcmf_sdio_sb_resetcore; |
| break; |
| case SOCI_AI: |
| ci->iscoreup = brcmf_sdio_ai_iscoreup; |
| ci->corerev = brcmf_sdio_ai_corerev; |
| ci->coredisable = brcmf_sdio_ai_coredisable; |
| ci->resetcore = brcmf_sdio_ai_resetcore; |
| break; |
| default: |
| brcmf_err("socitype %u not supported\n", ci->socitype); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) |
| { |
| int err = 0; |
| u8 clkval, clkset; |
| |
| /* Try forcing SDIO core to do ALPAvail request only */ |
| clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; |
| brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); |
| if (err) { |
| brcmf_err("error writing for HT off\n"); |
| return err; |
| } |
| |
| /* If register supported, wait for ALPAvail and then force ALP */ |
| /* This may take up to 15 milliseconds */ |
| clkval = brcmf_sdio_regrb(sdiodev, |
| SBSDIO_FUNC1_CHIPCLKCSR, NULL); |
| |
| if ((clkval & ~SBSDIO_AVBITS) != clkset) { |
| brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", |
| clkset, clkval); |
| return -EACCES; |
| } |
| |
| SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev, |
| SBSDIO_FUNC1_CHIPCLKCSR, NULL)), |
| !SBSDIO_ALPAV(clkval)), |
| PMU_MAX_TRANSITION_DLY); |
| if (!SBSDIO_ALPAV(clkval)) { |
| brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", |
| clkval); |
| return -EBUSY; |
| } |
| |
| clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; |
| brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); |
| udelay(65); |
| |
| /* Also, disable the extra SDIO pull-ups */ |
| brcmf_sdio_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); |
| |
| return 0; |
| } |
| |
| static void |
| brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci) |
| { |
| u32 base = ci->c_inf[0].base; |
| |
| /* get chipcommon rev */ |
| ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id); |
| |
| /* get chipcommon capabilites */ |
| ci->c_inf[0].caps = brcmf_sdio_regrl(sdiodev, |
| CORE_CC_REG(base, capabilities), |
| NULL); |
| |
| /* get pmu caps & rev */ |
| if (ci->c_inf[0].caps & CC_CAP_PMU) { |
| ci->pmucaps = |
| brcmf_sdio_regrl(sdiodev, |
| CORE_CC_REG(base, pmucapabilities), |
| NULL); |
| ci->pmurev = ci->pmucaps & PCAP_REV_MASK; |
| } |
| |
| ci->c_inf[1].rev = ci->corerev(sdiodev, ci, ci->c_inf[1].id); |
| |
| brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, buscore rev/type=%d/0x%x\n", |
| ci->c_inf[0].rev, ci->pmurev, |
| ci->c_inf[1].rev, ci->c_inf[1].id); |
| |
| /* |
| * Make sure any on-chip ARM is off (in case strapping is wrong), |
| * or downloaded code was already running. |
| */ |
| ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0); |
| } |
| |
| int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info **ci_ptr, u32 regs) |
| { |
| int ret; |
| struct chip_info *ci; |
| |
| brcmf_dbg(TRACE, "Enter\n"); |
| |
| /* alloc chip_info_t */ |
| ci = kzalloc(sizeof(struct chip_info), GFP_ATOMIC); |
| if (!ci) |
| return -ENOMEM; |
| |
| ret = brcmf_sdio_chip_buscoreprep(sdiodev); |
| if (ret != 0) |
| goto err; |
| |
| ret = brcmf_sdio_chip_recognition(sdiodev, ci, regs); |
| if (ret != 0) |
| goto err; |
| |
| brcmf_sdio_chip_buscoresetup(sdiodev, ci); |
| |
| brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup), |
| 0, NULL); |
| brcmf_sdio_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), |
| 0, NULL); |
| |
| *ci_ptr = ci; |
| return 0; |
| |
| err: |
| kfree(ci); |
| return ret; |
| } |
| |
| void |
| brcmf_sdio_chip_detach(struct chip_info **ci_ptr) |
| { |
| brcmf_dbg(TRACE, "Enter\n"); |
| |
| kfree(*ci_ptr); |
| *ci_ptr = NULL; |
| } |
| |
| static char *brcmf_sdio_chip_name(uint chipid, char *buf, uint len) |
| { |
| const char *fmt; |
| |
| fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x"; |
| snprintf(buf, len, fmt, chipid); |
| return buf; |
| } |
| |
| void |
| brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, u32 drivestrength) |
| { |
| const struct sdiod_drive_str *str_tab = NULL; |
| u32 str_mask; |
| u32 str_shift; |
| char chn[8]; |
| u32 base = ci->c_inf[0].base; |
| u32 i; |
| u32 drivestrength_sel = 0; |
| u32 cc_data_temp; |
| u32 addr; |
| |
| if (!(ci->c_inf[0].caps & CC_CAP_PMU)) |
| return; |
| |
| switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) { |
| case SDIOD_DRVSTR_KEY(BCM4330_CHIP_ID, 12): |
| str_tab = sdiod_drvstr_tab1_1v8; |
| str_mask = 0x00003800; |
| str_shift = 11; |
| break; |
| case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17): |
| /* note: 43143 does not support tristate */ |
| i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1; |
| if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) { |
| str_tab = sdiod_drvstr_tab2_3v3; |
| str_mask = 0x00000007; |
| str_shift = 0; |
| } else |
| brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", |
| brcmf_sdio_chip_name(ci->chip, chn, 8), |
| drivestrength); |
| break; |
| default: |
| brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n", |
| brcmf_sdio_chip_name(ci->chip, chn, 8), |
| ci->chiprev, ci->pmurev); |
| break; |
| } |
| |
| if (str_tab != NULL) { |
| for (i = 0; str_tab[i].strength != 0; i++) { |
| if (drivestrength >= str_tab[i].strength) { |
| drivestrength_sel = str_tab[i].sel; |
| break; |
| } |
| } |
| addr = CORE_CC_REG(base, chipcontrol_addr); |
| brcmf_sdio_regwl(sdiodev, addr, 1, NULL); |
| cc_data_temp = brcmf_sdio_regrl(sdiodev, addr, NULL); |
| cc_data_temp &= ~str_mask; |
| drivestrength_sel <<= str_shift; |
| cc_data_temp |= drivestrength_sel; |
| brcmf_sdio_regwl(sdiodev, addr, cc_data_temp, NULL); |
| |
| brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", |
| str_tab[i].strength, drivestrength, cc_data_temp); |
| } |
| } |
| |
| #ifdef DEBUG |
| static bool |
| brcmf_sdio_chip_verifynvram(struct brcmf_sdio_dev *sdiodev, u32 nvram_addr, |
| char *nvram_dat, uint nvram_sz) |
| { |
| char *nvram_ularray; |
| int err; |
| bool ret = true; |
| |
| /* read back and verify */ |
| brcmf_dbg(INFO, "Compare NVRAM dl & ul; size=%d\n", nvram_sz); |
| nvram_ularray = kmalloc(nvram_sz, GFP_KERNEL); |
| /* do not proceed while no memory but */ |
| if (!nvram_ularray) |
| return true; |
| |
| /* Upload image to verify downloaded contents. */ |
| memset(nvram_ularray, 0xaa, nvram_sz); |
| |
| /* Read the vars list to temp buffer for comparison */ |
| err = brcmf_sdio_ramrw(sdiodev, false, nvram_addr, nvram_ularray, |
| nvram_sz); |
| if (err) { |
| brcmf_err("error %d on reading %d nvram bytes at 0x%08x\n", |
| err, nvram_sz, nvram_addr); |
| } else if (memcmp(nvram_dat, nvram_ularray, nvram_sz)) { |
| brcmf_err("Downloaded NVRAM image is corrupted\n"); |
| ret = false; |
| } |
| kfree(nvram_ularray); |
| |
| return ret; |
| } |
| #else /* DEBUG */ |
| static inline bool |
| brcmf_sdio_chip_verifynvram(struct brcmf_sdio_dev *sdiodev, u32 nvram_addr, |
| char *nvram_dat, uint nvram_sz) |
| { |
| return true; |
| } |
| #endif /* DEBUG */ |
| |
| static bool brcmf_sdio_chip_writenvram(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, |
| char *nvram_dat, uint nvram_sz) |
| { |
| int err; |
| u32 nvram_addr; |
| u32 token; |
| __le32 token_le; |
| |
| nvram_addr = (ci->ramsize - 4) - nvram_sz + ci->rambase; |
| |
| /* Write the vars list */ |
| err = brcmf_sdio_ramrw(sdiodev, true, nvram_addr, nvram_dat, nvram_sz); |
| if (err) { |
| brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n", |
| err, nvram_sz, nvram_addr); |
| return false; |
| } |
| |
| if (!brcmf_sdio_chip_verifynvram(sdiodev, nvram_addr, |
| nvram_dat, nvram_sz)) |
| return false; |
| |
| /* generate token: |
| * nvram size, converted to words, in lower 16-bits, checksum |
| * in upper 16-bits. |
| */ |
| token = nvram_sz / 4; |
| token = (~token << 16) | (token & 0x0000FFFF); |
| token_le = cpu_to_le32(token); |
| |
| brcmf_dbg(INFO, "RAM size: %d\n", ci->ramsize); |
| brcmf_dbg(INFO, "nvram is placed at %d, size %d, token=0x%08x\n", |
| nvram_addr, nvram_sz, token); |
| |
| /* Write the length token to the last word */ |
| if (brcmf_sdio_ramrw(sdiodev, true, (ci->ramsize - 4 + ci->rambase), |
| (u8 *)&token_le, 4)) |
| return false; |
| |
| return true; |
| } |
| |
| static void |
| brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci) |
| { |
| u32 zeros = 0; |
| |
| ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0); |
| ci->resetcore(sdiodev, ci, BCMA_CORE_INTERNAL_MEM, 0); |
| |
| /* clear length token */ |
| brcmf_sdio_ramrw(sdiodev, true, ci->ramsize - 4, (u8 *)&zeros, 4); |
| } |
| |
| static bool |
| brcmf_sdio_chip_cm3_exitdl(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, |
| char *nvram_dat, uint nvram_sz) |
| { |
| u8 core_idx; |
| u32 reg_addr; |
| |
| if (!ci->iscoreup(sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) { |
| brcmf_err("SOCRAM core is down after reset?\n"); |
| return false; |
| } |
| |
| if (!brcmf_sdio_chip_writenvram(sdiodev, ci, nvram_dat, nvram_sz)) |
| return false; |
| |
| /* clear all interrupts */ |
| core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV); |
| reg_addr = ci->c_inf[core_idx].base; |
| reg_addr += offsetof(struct sdpcmd_regs, intstatus); |
| brcmf_sdio_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); |
| |
| ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CM3, 0); |
| |
| return true; |
| } |
| |
| static inline void |
| brcmf_sdio_chip_cr4_enterdl(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci) |
| { |
| ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, |
| ARMCR4_BCMA_IOCTL_CPUHALT); |
| } |
| |
| static bool |
| brcmf_sdio_chip_cr4_exitdl(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci, |
| char *nvram_dat, uint nvram_sz) |
| { |
| u8 core_idx; |
| u32 reg_addr; |
| |
| if (!brcmf_sdio_chip_writenvram(sdiodev, ci, nvram_dat, nvram_sz)) |
| return false; |
| |
| /* clear all interrupts */ |
| core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV); |
| reg_addr = ci->c_inf[core_idx].base; |
| reg_addr += offsetof(struct sdpcmd_regs, intstatus); |
| brcmf_sdio_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); |
| |
| /* Write reset vector to address 0 */ |
| brcmf_sdio_ramrw(sdiodev, true, 0, (void *)&ci->rst_vec, |
| sizeof(ci->rst_vec)); |
| |
| /* restore ARM */ |
| ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, 0); |
| |
| return true; |
| } |
| |
| void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci) |
| { |
| u8 arm_core_idx; |
| |
| arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3); |
| if (BRCMF_MAX_CORENUM != arm_core_idx) { |
| brcmf_sdio_chip_cm3_enterdl(sdiodev, ci); |
| return; |
| } |
| |
| brcmf_sdio_chip_cr4_enterdl(sdiodev, ci); |
| } |
| |
| bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev, |
| struct chip_info *ci, char *nvram_dat, |
| uint nvram_sz) |
| { |
| u8 arm_core_idx; |
| |
| arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3); |
| if (BRCMF_MAX_CORENUM != arm_core_idx) |
| return brcmf_sdio_chip_cm3_exitdl(sdiodev, ci, nvram_dat, |
| nvram_sz); |
| |
| return brcmf_sdio_chip_cr4_exitdl(sdiodev, ci, nvram_dat, nvram_sz); |
| } |