| /* |
| * Qualcomm Atheros AP136 reference board support |
| * |
| * Copyright (c) 2012 Qualcomm Atheros |
| * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/ath9k_platform.h> |
| |
| #include "machtypes.h" |
| #include "dev-gpio-buttons.h" |
| #include "dev-leds-gpio.h" |
| #include "dev-spi.h" |
| #include "dev-usb.h" |
| #include "dev-wmac.h" |
| #include "pci.h" |
| |
| #define AP136_GPIO_LED_STATUS_RED 14 |
| #define AP136_GPIO_LED_STATUS_GREEN 19 |
| #define AP136_GPIO_LED_USB 4 |
| #define AP136_GPIO_LED_WLAN_2G 13 |
| #define AP136_GPIO_LED_WLAN_5G 12 |
| #define AP136_GPIO_LED_WPS_RED 15 |
| #define AP136_GPIO_LED_WPS_GREEN 20 |
| |
| #define AP136_GPIO_BTN_WPS 16 |
| #define AP136_GPIO_BTN_RFKILL 21 |
| |
| #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ |
| #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) |
| |
| #define AP136_WMAC_CALDATA_OFFSET 0x1000 |
| #define AP136_PCIE_CALDATA_OFFSET 0x5000 |
| |
| static struct gpio_led ap136_leds_gpio[] __initdata = { |
| { |
| .name = "qca:green:status", |
| .gpio = AP136_GPIO_LED_STATUS_GREEN, |
| .active_low = 1, |
| }, |
| { |
| .name = "qca:red:status", |
| .gpio = AP136_GPIO_LED_STATUS_RED, |
| .active_low = 1, |
| }, |
| { |
| .name = "qca:green:wps", |
| .gpio = AP136_GPIO_LED_WPS_GREEN, |
| .active_low = 1, |
| }, |
| { |
| .name = "qca:red:wps", |
| .gpio = AP136_GPIO_LED_WPS_RED, |
| .active_low = 1, |
| }, |
| { |
| .name = "qca:red:wlan-2g", |
| .gpio = AP136_GPIO_LED_WLAN_2G, |
| .active_low = 1, |
| }, |
| { |
| .name = "qca:red:usb", |
| .gpio = AP136_GPIO_LED_USB, |
| .active_low = 1, |
| } |
| }; |
| |
| static struct gpio_keys_button ap136_gpio_keys[] __initdata = { |
| { |
| .desc = "WPS button", |
| .type = EV_KEY, |
| .code = KEY_WPS_BUTTON, |
| .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, |
| .gpio = AP136_GPIO_BTN_WPS, |
| .active_low = 1, |
| }, |
| { |
| .desc = "RFKILL button", |
| .type = EV_KEY, |
| .code = KEY_RFKILL, |
| .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, |
| .gpio = AP136_GPIO_BTN_RFKILL, |
| .active_low = 1, |
| }, |
| }; |
| |
| static struct spi_board_info ap136_spi_info[] = { |
| { |
| .bus_num = 0, |
| .chip_select = 0, |
| .max_speed_hz = 25000000, |
| .modalias = "mx25l6405d", |
| } |
| }; |
| |
| static struct ath79_spi_platform_data ap136_spi_data = { |
| .bus_num = 0, |
| .num_chipselect = 1, |
| }; |
| |
| #ifdef CONFIG_PCI |
| static struct ath9k_platform_data ap136_ath9k_data; |
| |
| static int ap136_pci_plat_dev_init(struct pci_dev *dev) |
| { |
| if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) |
| dev->dev.platform_data = &ap136_ath9k_data; |
| |
| return 0; |
| } |
| |
| static void __init ap136_pci_init(u8 *eeprom) |
| { |
| memcpy(ap136_ath9k_data.eeprom_data, eeprom, |
| sizeof(ap136_ath9k_data.eeprom_data)); |
| |
| ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); |
| ath79_register_pci(); |
| } |
| #else |
| static inline void ap136_pci_init(void) {} |
| #endif /* CONFIG_PCI */ |
| |
| static void __init ap136_setup(void) |
| { |
| u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
| |
| ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), |
| ap136_leds_gpio); |
| ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, |
| ARRAY_SIZE(ap136_gpio_keys), |
| ap136_gpio_keys); |
| ath79_register_spi(&ap136_spi_data, ap136_spi_info, |
| ARRAY_SIZE(ap136_spi_info)); |
| ath79_register_usb(); |
| ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); |
| ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); |
| } |
| |
| MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", |
| "Atheros AP136-010 reference board", |
| ap136_setup); |