if (BF52x) | |
source "arch/blackfin/mach-bf527/boards/Kconfig" | |
menu "BF527 Specific Configuration" | |
comment "Alternative Multiplexing Scheme" | |
choice | |
prompt "SPORT0" | |
default BF527_SPORT0_PORTG | |
help | |
Select PORT used for SPORT0. See Hardware Reference Manual | |
config BF527_SPORT0_PORTF | |
bool "PORT F" | |
help | |
PORT F | |
config BF527_SPORT0_PORTG | |
bool "PORT G" | |
help | |
PORT G | |
endchoice | |
choice | |
prompt "SPORT0 TSCLK Location" | |
depends on BF527_SPORT0_PORTG | |
default BF527_SPORT0_TSCLK_PG10 | |
help | |
Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual | |
config BF527_SPORT0_TSCLK_PG10 | |
bool "PORT PG10" | |
help | |
PORT PG10 | |
config BF527_SPORT0_TSCLK_PG14 | |
bool "PORT PG14" | |
help | |
PORT PG14 | |
endchoice | |
choice | |
prompt "UART1" | |
default BF527_UART1_PORTF | |
help | |
Select PORT used for UART1. See Hardware Reference Manual | |
config BF527_UART1_PORTF | |
bool "PORT F" | |
help | |
PORT F | |
config BF527_UART1_PORTG | |
bool "PORT G" | |
help | |
PORT G | |
endchoice | |
choice | |
prompt "NAND (NFC) Data" | |
default BF527_NAND_D_PORTH | |
help | |
Select PORT used for NAND Data Bus. See Hardware Reference Manual | |
config BF527_NAND_D_PORTF | |
bool "PORT F" | |
help | |
PORT F | |
config BF527_NAND_D_PORTH | |
bool "PORT H" | |
help | |
PORT H | |
endchoice | |
comment "Interrupt Priority Assignment" | |
menu "Priority" | |
config IRQ_PLL_WAKEUP | |
int "IRQ_PLL_WAKEUP" | |
default 7 | |
config IRQ_DMA0_ERROR | |
int "IRQ_DMA0_ERROR" | |
default 7 | |
config IRQ_DMAR0_BLK | |
int "IRQ_DMAR0_BLK" | |
default 7 | |
config IRQ_DMAR1_BLK | |
int "IRQ_DMAR1_BLK" | |
default 7 | |
config IRQ_DMAR0_OVR | |
int "IRQ_DMAR0_OVR" | |
default 7 | |
config IRQ_DMAR1_OVR | |
int "IRQ_DMAR1_OVR" | |
default 7 | |
config IRQ_PPI_ERROR | |
int "IRQ_PPI_ERROR" | |
default 7 | |
config IRQ_MAC_ERROR | |
int "IRQ_MAC_ERROR" | |
default 7 | |
config IRQ_SPORT0_ERROR | |
int "IRQ_SPORT0_ERROR" | |
default 7 | |
config IRQ_SPORT1_ERROR | |
int "IRQ_SPORT1_ERROR" | |
default 7 | |
config IRQ_UART0_ERROR | |
int "IRQ_UART0_ERROR" | |
default 7 | |
config IRQ_UART1_ERROR | |
int "IRQ_UART1_ERROR" | |
default 7 | |
config IRQ_RTC | |
int "IRQ_RTC" | |
default 8 | |
config IRQ_PPI | |
int "IRQ_PPI" | |
default 8 | |
config IRQ_SPORT0_RX | |
int "IRQ_SPORT0_RX" | |
default 9 | |
config IRQ_SPORT0_TX | |
int "IRQ_SPORT0_TX" | |
default 9 | |
config IRQ_SPORT1_RX | |
int "IRQ_SPORT1_RX" | |
default 9 | |
config IRQ_SPORT1_TX | |
int "IRQ_SPORT1_TX" | |
default 9 | |
config IRQ_TWI | |
int "IRQ_TWI" | |
default 10 | |
config IRQ_SPI | |
int "IRQ_SPI" | |
default 10 | |
config IRQ_UART0_RX | |
int "IRQ_UART0_RX" | |
default 10 | |
config IRQ_UART0_TX | |
int "IRQ_UART0_TX" | |
default 10 | |
config IRQ_UART1_RX | |
int "IRQ_UART1_RX" | |
default 10 | |
config IRQ_UART1_TX | |
int "IRQ_UART1_TX" | |
default 10 | |
config IRQ_OPTSEC | |
int "IRQ_OPTSEC" | |
default 11 | |
config IRQ_CNT | |
int "IRQ_CNT" | |
default 11 | |
config IRQ_MAC_RX | |
int "IRQ_MAC_RX" | |
default 11 | |
config IRQ_PORTH_INTA | |
int "IRQ_PORTH_INTA" | |
default 11 | |
config IRQ_MAC_TX | |
int "IRQ_MAC_TX/NFC" | |
default 11 | |
config IRQ_PORTH_INTB | |
int "IRQ_PORTH_INTB" | |
default 11 | |
config IRQ_TIMER0 | |
int "IRQ_TIMER0" | |
default 8 | |
config IRQ_TIMER1 | |
int "IRQ_TIMER1" | |
default 12 | |
config IRQ_TIMER2 | |
int "IRQ_TIMER2" | |
default 12 | |
config IRQ_TIMER3 | |
int "IRQ_TIMER3" | |
default 12 | |
config IRQ_TIMER4 | |
int "IRQ_TIMER4" | |
default 12 | |
config IRQ_TIMER5 | |
int "IRQ_TIMER5" | |
default 12 | |
config IRQ_TIMER6 | |
int "IRQ_TIMER6" | |
default 12 | |
config IRQ_TIMER7 | |
int "IRQ_TIMER7" | |
default 12 | |
config IRQ_PORTG_INTA | |
int "IRQ_PORTG_INTA" | |
default 12 | |
config IRQ_PORTG_INTB | |
int "IRQ_PORTG_INTB" | |
default 12 | |
config IRQ_MEM_DMA0 | |
int "IRQ_MEM_DMA0" | |
default 13 | |
config IRQ_MEM_DMA1 | |
int "IRQ_MEM_DMA1" | |
default 13 | |
config IRQ_WATCH | |
int "IRQ_WATCH" | |
default 13 | |
config IRQ_PORTF_INTA | |
int "IRQ_PORTF_INTA" | |
default 13 | |
config IRQ_PORTF_INTB | |
int "IRQ_PORTF_INTB" | |
default 13 | |
config IRQ_SPI_ERROR | |
int "IRQ_SPI_ERROR" | |
default 7 | |
config IRQ_NFC_ERROR | |
int "IRQ_NFC_ERROR" | |
default 7 | |
config IRQ_HDMA_ERROR | |
int "IRQ_HDMA_ERROR" | |
default 7 | |
config IRQ_HDMA | |
int "IRQ_HDMA" | |
default 7 | |
config IRQ_USB_EINT | |
int "IRQ_USB_EINT" | |
default 10 | |
config IRQ_USB_INT0 | |
int "IRQ_USB_INT0" | |
default 10 | |
config IRQ_USB_INT1 | |
int "IRQ_USB_INT1" | |
default 10 | |
config IRQ_USB_INT2 | |
int "IRQ_USB_INT2" | |
default 10 | |
config IRQ_USB_DMA | |
int "IRQ_USB_DMA" | |
default 10 | |
help | |
Enter the priority numbers between 7-13 ONLY. Others are Reserved. | |
This applies to all the above. It is not recommended to assign the | |
highest priority number 7 to UART or any other device. | |
endmenu | |
endmenu | |
endif |