| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE |
| * Copyright (C) 2010 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/map.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/cfi.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/physmap.h> |
| |
| #include <lantiq_soc.h> |
| #include <lantiq_platform.h> |
| |
| /* |
| * The NOR flash is connected to the same external bus unit (EBU) as PCI. |
| * To make PCI work we need to enable the endianness swapping for the address |
| * written to the EBU. This endianness swapping works for PCI correctly but |
| * fails for attached NOR devices. To workaround this we need to use a complex |
| * map. The workaround involves swapping all addresses whilst probing the chip. |
| * Once probing is complete we stop swapping the addresses but swizzle the |
| * unlock addresses to ensure that access to the NOR device works correctly. |
| */ |
| |
| enum { |
| LTQ_NOR_PROBING, |
| LTQ_NOR_NORMAL |
| }; |
| |
| struct ltq_mtd { |
| struct resource *res; |
| struct mtd_info *mtd; |
| struct map_info *map; |
| }; |
| |
| static char ltq_map_name[] = "ltq_nor"; |
| |
| static map_word |
| ltq_read16(struct map_info *map, unsigned long adr) |
| { |
| unsigned long flags; |
| map_word temp; |
| |
| if (map->map_priv_1 == LTQ_NOR_PROBING) |
| adr ^= 2; |
| spin_lock_irqsave(&ebu_lock, flags); |
| temp.x[0] = *(u16 *)(map->virt + adr); |
| spin_unlock_irqrestore(&ebu_lock, flags); |
| return temp; |
| } |
| |
| static void |
| ltq_write16(struct map_info *map, map_word d, unsigned long adr) |
| { |
| unsigned long flags; |
| |
| if (map->map_priv_1 == LTQ_NOR_PROBING) |
| adr ^= 2; |
| spin_lock_irqsave(&ebu_lock, flags); |
| *(u16 *)(map->virt + adr) = d.x[0]; |
| spin_unlock_irqrestore(&ebu_lock, flags); |
| } |
| |
| /* |
| * The following 2 functions copy data between iomem and a cached memory |
| * section. As memcpy() makes use of pre-fetching we cannot use it here. |
| * The normal alternative of using memcpy_{to,from}io also makes use of |
| * memcpy() on MIPS so it is not applicable either. We are therefore stuck |
| * with having to use our own loop. |
| */ |
| static void |
| ltq_copy_from(struct map_info *map, void *to, |
| unsigned long from, ssize_t len) |
| { |
| unsigned char *f = (unsigned char *)map->virt + from; |
| unsigned char *t = (unsigned char *)to; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ebu_lock, flags); |
| while (len--) |
| *t++ = *f++; |
| spin_unlock_irqrestore(&ebu_lock, flags); |
| } |
| |
| static void |
| ltq_copy_to(struct map_info *map, unsigned long to, |
| const void *from, ssize_t len) |
| { |
| unsigned char *f = (unsigned char *)from; |
| unsigned char *t = (unsigned char *)map->virt + to; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ebu_lock, flags); |
| while (len--) |
| *t++ = *f++; |
| spin_unlock_irqrestore(&ebu_lock, flags); |
| } |
| |
| static const char const *part_probe_types[] = { "cmdlinepart", NULL }; |
| |
| static int __init |
| ltq_mtd_probe(struct platform_device *pdev) |
| { |
| struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev); |
| struct ltq_mtd *ltq_mtd; |
| struct mtd_partition *parts; |
| struct resource *res; |
| int nr_parts = 0; |
| struct cfi_private *cfi; |
| int err; |
| |
| ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL); |
| platform_set_drvdata(pdev, ltq_mtd); |
| |
| ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!ltq_mtd->res) { |
| dev_err(&pdev->dev, "failed to get memory resource"); |
| err = -ENOENT; |
| goto err_out; |
| } |
| |
| res = devm_request_mem_region(&pdev->dev, ltq_mtd->res->start, |
| resource_size(ltq_mtd->res), dev_name(&pdev->dev)); |
| if (!ltq_mtd->res) { |
| dev_err(&pdev->dev, "failed to request mem resource"); |
| err = -EBUSY; |
| goto err_out; |
| } |
| |
| ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL); |
| ltq_mtd->map->phys = res->start; |
| ltq_mtd->map->size = resource_size(res); |
| ltq_mtd->map->virt = devm_ioremap_nocache(&pdev->dev, |
| ltq_mtd->map->phys, ltq_mtd->map->size); |
| if (!ltq_mtd->map->virt) { |
| dev_err(&pdev->dev, "failed to ioremap!\n"); |
| err = -ENOMEM; |
| goto err_free; |
| } |
| |
| ltq_mtd->map->name = ltq_map_name; |
| ltq_mtd->map->bankwidth = 2; |
| ltq_mtd->map->read = ltq_read16; |
| ltq_mtd->map->write = ltq_write16; |
| ltq_mtd->map->copy_from = ltq_copy_from; |
| ltq_mtd->map->copy_to = ltq_copy_to; |
| |
| ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING; |
| ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map); |
| ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL; |
| |
| if (!ltq_mtd->mtd) { |
| dev_err(&pdev->dev, "probing failed\n"); |
| err = -ENXIO; |
| goto err_unmap; |
| } |
| |
| ltq_mtd->mtd->owner = THIS_MODULE; |
| |
| cfi = ltq_mtd->map->fldrv_priv; |
| cfi->addr_unlock1 ^= 1; |
| cfi->addr_unlock2 ^= 1; |
| |
| nr_parts = parse_mtd_partitions(ltq_mtd->mtd, |
| part_probe_types, &parts, 0); |
| if (nr_parts > 0) { |
| dev_info(&pdev->dev, |
| "using %d partitions from cmdline", nr_parts); |
| } else { |
| nr_parts = ltq_mtd_data->nr_parts; |
| parts = ltq_mtd_data->parts; |
| } |
| |
| err = mtd_device_register(ltq_mtd->mtd, parts, nr_parts); |
| if (err) { |
| dev_err(&pdev->dev, "failed to add partitions\n"); |
| goto err_destroy; |
| } |
| |
| return 0; |
| |
| err_destroy: |
| map_destroy(ltq_mtd->mtd); |
| err_unmap: |
| iounmap(ltq_mtd->map->virt); |
| err_free: |
| kfree(ltq_mtd->map); |
| err_out: |
| kfree(ltq_mtd); |
| return err; |
| } |
| |
| static int __devexit |
| ltq_mtd_remove(struct platform_device *pdev) |
| { |
| struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); |
| |
| if (ltq_mtd) { |
| if (ltq_mtd->mtd) { |
| mtd_device_unregister(ltq_mtd->mtd); |
| map_destroy(ltq_mtd->mtd); |
| } |
| if (ltq_mtd->map->virt) |
| iounmap(ltq_mtd->map->virt); |
| kfree(ltq_mtd->map); |
| kfree(ltq_mtd); |
| } |
| return 0; |
| } |
| |
| static struct platform_driver ltq_mtd_driver = { |
| .remove = __devexit_p(ltq_mtd_remove), |
| .driver = { |
| .name = "ltq_nor", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init |
| init_ltq_mtd(void) |
| { |
| int ret = platform_driver_probe(<q_mtd_driver, ltq_mtd_probe); |
| |
| if (ret) |
| pr_err("ltq_nor: error registering platform driver"); |
| return ret; |
| } |
| |
| static void __exit |
| exit_ltq_mtd(void) |
| { |
| platform_driver_unregister(<q_mtd_driver); |
| } |
| |
| module_init(init_ltq_mtd); |
| module_exit(exit_ltq_mtd); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); |
| MODULE_DESCRIPTION("Lantiq SoC NOR"); |