| /* |
| * linux/arch/arm/mach-pxa/corgi_lcd.c |
| * |
| * Corgi/Spitz LCD Specific Code |
| * |
| * Copyright (C) 2005 Richard Purdie |
| * |
| * Connectivity: |
| * Corgi - LCD to ATI Imageon w100 (Wallaby) |
| * Spitz - LCD to PXA Framebuffer |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <asm/arch/akita.h> |
| #include <asm/arch/corgi.h> |
| #include <asm/hardware.h> |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/sharpsl.h> |
| #include <asm/arch/spitz.h> |
| #include <asm/hardware/scoop.h> |
| #include <asm/mach/sharpsl_param.h> |
| #include "generic.h" |
| |
| /* Register Addresses */ |
| #define RESCTL_ADRS 0x00 |
| #define PHACTRL_ADRS 0x01 |
| #define DUTYCTRL_ADRS 0x02 |
| #define POWERREG0_ADRS 0x03 |
| #define POWERREG1_ADRS 0x04 |
| #define GPOR3_ADRS 0x05 |
| #define PICTRL_ADRS 0x06 |
| #define POLCTRL_ADRS 0x07 |
| |
| /* Resgister Bit Definitions */ |
| #define RESCTL_QVGA 0x01 |
| #define RESCTL_VGA 0x00 |
| |
| #define POWER1_VW_ON 0x01 /* VW Supply FET ON */ |
| #define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ |
| #define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ |
| |
| #define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ |
| #define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ |
| #define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ |
| |
| #define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ |
| #define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ |
| #define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ |
| #define POWER0_COM_ON 0x08 /* COM Powewr Supply ON */ |
| #define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ |
| |
| #define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ |
| #define POWER0_COM_OFF 0x00 /* COM Powewr Supply OFF */ |
| #define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ |
| |
| #define PICTRL_INIT_STATE 0x01 |
| #define PICTRL_INIOFF 0x02 |
| #define PICTRL_POWER_DOWN 0x04 |
| #define PICTRL_COM_SIGNAL_OFF 0x08 |
| #define PICTRL_DAC_SIGNAL_OFF 0x10 |
| |
| #define POLCTRL_SYNC_POL_FALL 0x01 |
| #define POLCTRL_EN_POL_FALL 0x02 |
| #define POLCTRL_DATA_POL_FALL 0x04 |
| #define POLCTRL_SYNC_ACT_H 0x08 |
| #define POLCTRL_EN_ACT_L 0x10 |
| |
| #define POLCTRL_SYNC_POL_RISE 0x00 |
| #define POLCTRL_EN_POL_RISE 0x00 |
| #define POLCTRL_DATA_POL_RISE 0x00 |
| #define POLCTRL_SYNC_ACT_L 0x00 |
| #define POLCTRL_EN_ACT_H 0x00 |
| |
| #define PHACTRL_PHASE_MANUAL 0x01 |
| #define DEFAULT_PHAD_QVGA (9) |
| #define DEFAULT_COMADJ (125) |
| |
| /* |
| * This is only a psuedo I2C interface. We can't use the standard kernel |
| * routines as the interface is write only. We just assume the data is acked... |
| */ |
| static void lcdtg_ssp_i2c_send(u8 data) |
| { |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); |
| udelay(10); |
| } |
| |
| static void lcdtg_i2c_send_bit(u8 data) |
| { |
| lcdtg_ssp_i2c_send(data); |
| lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); |
| lcdtg_ssp_i2c_send(data); |
| } |
| |
| static void lcdtg_i2c_send_start(u8 base) |
| { |
| lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); |
| lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); |
| lcdtg_ssp_i2c_send(base); |
| } |
| |
| static void lcdtg_i2c_send_stop(u8 base) |
| { |
| lcdtg_ssp_i2c_send(base); |
| lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); |
| lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); |
| } |
| |
| static void lcdtg_i2c_send_byte(u8 base, u8 data) |
| { |
| int i; |
| for (i = 0; i < 8; i++) { |
| if (data & 0x80) |
| lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); |
| else |
| lcdtg_i2c_send_bit(base); |
| data <<= 1; |
| } |
| } |
| |
| static void lcdtg_i2c_wait_ack(u8 base) |
| { |
| lcdtg_i2c_send_bit(base); |
| } |
| |
| static void lcdtg_set_common_voltage(u8 base_data, u8 data) |
| { |
| /* Set Common Voltage to M62332FP via I2C */ |
| lcdtg_i2c_send_start(base_data); |
| lcdtg_i2c_send_byte(base_data, 0x9c); |
| lcdtg_i2c_wait_ack(base_data); |
| lcdtg_i2c_send_byte(base_data, 0x00); |
| lcdtg_i2c_wait_ack(base_data); |
| lcdtg_i2c_send_byte(base_data, data); |
| lcdtg_i2c_wait_ack(base_data); |
| lcdtg_i2c_send_stop(base_data); |
| } |
| |
| /* Set Phase Adjuct */ |
| static void lcdtg_set_phadadj(int mode) |
| { |
| int adj; |
| switch(mode) { |
| case 480: |
| case 640: |
| /* Setting for VGA */ |
| adj = sharpsl_param.phadadj; |
| if (adj < 0) { |
| adj = PHACTRL_PHASE_MANUAL; |
| } else { |
| adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; |
| } |
| break; |
| case 240: |
| case 320: |
| default: |
| /* Setting for QVGA */ |
| adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; |
| break; |
| } |
| |
| corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); |
| } |
| |
| static int lcd_inited; |
| |
| static void lcdtg_hw_init(int mode) |
| { |
| if (!lcd_inited) { |
| int comadj; |
| |
| /* Initialize Internal Logic & Port */ |
| corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE |
| | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); |
| |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF |
| | POWER0_COM_OFF | POWER0_VCC5_OFF); |
| |
| corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); |
| |
| /* VDD(+8V), SVSS(-4V) ON */ |
| corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); |
| mdelay(3); |
| |
| /* DAC ON */ |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
| | POWER0_COM_OFF | POWER0_VCC5_OFF); |
| |
| /* INIB = H, INI = L */ |
| /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ |
| corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); |
| |
| /* Set Common Voltage */ |
| comadj = sharpsl_param.comadj; |
| if (comadj < 0) |
| comadj = DEFAULT_COMADJ; |
| lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); |
| |
| /* VCC5 ON, DAC ON */ |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | |
| POWER0_COM_OFF | POWER0_VCC5_ON); |
| |
| /* GVSS(-8V) ON, VDD ON */ |
| corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); |
| mdelay(2); |
| |
| /* COM SIGNAL ON (PICTL[3] = L) */ |
| corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); |
| |
| /* COM ON, DAC ON, VCC5_ON */ |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
| | POWER0_COM_ON | POWER0_VCC5_ON); |
| |
| /* VW ON, GVSS ON, VDD ON */ |
| corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); |
| |
| /* Signals output enable */ |
| corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); |
| |
| /* Set Phase Adjuct */ |
| lcdtg_set_phadadj(mode); |
| |
| /* Initialize for Input Signals from ATI */ |
| corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE |
| | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); |
| udelay(1000); |
| |
| lcd_inited=1; |
| } else { |
| lcdtg_set_phadadj(mode); |
| } |
| |
| switch(mode) { |
| case 480: |
| case 640: |
| /* Set Lcd Resolution (VGA) */ |
| corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); |
| break; |
| case 240: |
| case 320: |
| default: |
| /* Set Lcd Resolution (QVGA) */ |
| corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); |
| break; |
| } |
| } |
| |
| static void lcdtg_suspend(void) |
| { |
| /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ |
| mdelay(34); |
| |
| /* (1)VW OFF */ |
| corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); |
| |
| /* (2)COM OFF */ |
| corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); |
| |
| /* (3)Set Common Voltage Bias 0V */ |
| lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); |
| |
| /* (4)GVSS OFF */ |
| corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); |
| |
| /* (5)VCC5 OFF */ |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); |
| |
| /* (6)Set PDWN, INIOFF, DACOFF */ |
| corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | |
| PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); |
| |
| /* (7)DAC OFF */ |
| corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); |
| |
| /* (8)VDD OFF */ |
| corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); |
| |
| lcd_inited = 0; |
| } |
| |
| |
| /* |
| * Corgi w100 Frame Buffer Device |
| */ |
| #ifdef CONFIG_PXA_SHARP_C7xx |
| |
| #include <video/w100fb.h> |
| |
| static void w100_lcdtg_suspend(struct w100fb_par *par) |
| { |
| lcdtg_suspend(); |
| } |
| |
| static void w100_lcdtg_init(struct w100fb_par *par) |
| { |
| lcdtg_hw_init(par->xres); |
| } |
| |
| |
| static struct w100_tg_info corgi_lcdtg_info = { |
| .change = w100_lcdtg_init, |
| .suspend = w100_lcdtg_suspend, |
| .resume = w100_lcdtg_init, |
| }; |
| |
| static struct w100_mem_info corgi_fb_mem = { |
| .ext_cntl = 0x00040003, |
| .sdram_mode_reg = 0x00650021, |
| .ext_timing_cntl = 0x10002a4a, |
| .io_cntl = 0x7ff87012, |
| .size = 0x1fffff, |
| }; |
| |
| static struct w100_gen_regs corgi_fb_regs = { |
| .lcd_format = 0x00000003, |
| .lcdd_cntl1 = 0x01CC0000, |
| .lcdd_cntl2 = 0x0003FFFF, |
| .genlcd_cntl1 = 0x00FFFF0D, |
| .genlcd_cntl2 = 0x003F3003, |
| .genlcd_cntl3 = 0x000102aa, |
| }; |
| |
| static struct w100_gpio_regs corgi_fb_gpio = { |
| .init_data1 = 0x000000bf, |
| .init_data2 = 0x00000000, |
| .gpio_dir1 = 0x00000000, |
| .gpio_oe1 = 0x03c0feff, |
| .gpio_dir2 = 0x00000000, |
| .gpio_oe2 = 0x00000000, |
| }; |
| |
| static struct w100_mode corgi_fb_modes[] = { |
| { |
| .xres = 480, |
| .yres = 640, |
| .left_margin = 0x56, |
| .right_margin = 0x55, |
| .upper_margin = 0x03, |
| .lower_margin = 0x00, |
| .crtc_ss = 0x82360056, |
| .crtc_ls = 0xA0280000, |
| .crtc_gs = 0x80280028, |
| .crtc_vpos_gs = 0x02830002, |
| .crtc_rev = 0x00400008, |
| .crtc_dclk = 0xA0000000, |
| .crtc_gclk = 0x8015010F, |
| .crtc_goe = 0x80100110, |
| .crtc_ps1_active = 0x41060010, |
| .pll_freq = 75, |
| .fast_pll_freq = 100, |
| .sysclk_src = CLK_SRC_PLL, |
| .sysclk_divider = 0, |
| .pixclk_src = CLK_SRC_PLL, |
| .pixclk_divider = 2, |
| .pixclk_divider_rotated = 6, |
| },{ |
| .xres = 240, |
| .yres = 320, |
| .left_margin = 0x27, |
| .right_margin = 0x2e, |
| .upper_margin = 0x01, |
| .lower_margin = 0x00, |
| .crtc_ss = 0x81170027, |
| .crtc_ls = 0xA0140000, |
| .crtc_gs = 0xC0140014, |
| .crtc_vpos_gs = 0x00010141, |
| .crtc_rev = 0x00400008, |
| .crtc_dclk = 0xA0000000, |
| .crtc_gclk = 0x8015010F, |
| .crtc_goe = 0x80100110, |
| .crtc_ps1_active = 0x41060010, |
| .pll_freq = 0, |
| .fast_pll_freq = 0, |
| .sysclk_src = CLK_SRC_XTAL, |
| .sysclk_divider = 0, |
| .pixclk_src = CLK_SRC_XTAL, |
| .pixclk_divider = 1, |
| .pixclk_divider_rotated = 1, |
| }, |
| |
| }; |
| |
| static struct w100fb_mach_info corgi_fb_info = { |
| .tg = &corgi_lcdtg_info, |
| .init_mode = INIT_MODE_ROTATED, |
| .mem = &corgi_fb_mem, |
| .regs = &corgi_fb_regs, |
| .modelist = &corgi_fb_modes[0], |
| .num_modes = 2, |
| .gpio = &corgi_fb_gpio, |
| .xtal_freq = 12500000, |
| .xtal_dbl = 0, |
| }; |
| |
| static struct resource corgi_fb_resources[] = { |
| [0] = { |
| .start = 0x08000000, |
| .end = 0x08ffffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| struct platform_device corgifb_device = { |
| .name = "w100fb", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(corgi_fb_resources), |
| .resource = corgi_fb_resources, |
| .dev = { |
| .platform_data = &corgi_fb_info, |
| .parent = &corgissp_device.dev, |
| }, |
| |
| }; |
| #endif |
| |
| |
| /* |
| * Spitz PXA Frame Buffer Device |
| */ |
| #ifdef CONFIG_PXA_SHARP_Cxx00 |
| |
| #include <asm/arch/pxafb.h> |
| |
| void spitz_lcd_power(int on, struct fb_var_screeninfo *var) |
| { |
| if (on) |
| lcdtg_hw_init(var->xres); |
| else |
| lcdtg_suspend(); |
| } |
| |
| #endif |
| |
| |
| /* |
| * Corgi/Spitz Touchscreen to LCD interface |
| */ |
| static unsigned long (*get_hsync_time)(struct device *dev); |
| |
| static void inline sharpsl_wait_sync(int gpio) |
| { |
| while((GPLR(gpio) & GPIO_bit(gpio)) == 0); |
| while((GPLR(gpio) & GPIO_bit(gpio)) != 0); |
| } |
| |
| #ifdef CONFIG_PXA_SHARP_C7xx |
| unsigned long corgi_get_hsync_len(void) |
| { |
| if (!get_hsync_time) |
| get_hsync_time = symbol_get(w100fb_get_hsynclen); |
| if (!get_hsync_time) |
| return 0; |
| |
| return get_hsync_time(&corgifb_device.dev); |
| } |
| |
| void corgi_put_hsync(void) |
| { |
| if (get_hsync_time) |
| symbol_put(w100fb_get_hsynclen); |
| get_hsync_time = NULL; |
| } |
| |
| void corgi_wait_hsync(void) |
| { |
| sharpsl_wait_sync(CORGI_GPIO_HSYNC); |
| } |
| #endif |
| |
| #ifdef CONFIG_PXA_SHARP_Cxx00 |
| static struct device *spitz_pxafb_dev; |
| |
| static int is_pxafb_device(struct device * dev, void * data) |
| { |
| struct platform_device *pdev = container_of(dev, struct platform_device, dev); |
| |
| return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); |
| } |
| |
| unsigned long spitz_get_hsync_len(void) |
| { |
| #ifdef CONFIG_FB_PXA |
| if (!spitz_pxafb_dev) { |
| spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); |
| if (!spitz_pxafb_dev) |
| return 0; |
| } |
| if (!get_hsync_time) |
| get_hsync_time = symbol_get(pxafb_get_hsync_time); |
| if (!get_hsync_time) |
| #endif |
| return 0; |
| |
| return pxafb_get_hsync_time(spitz_pxafb_dev); |
| } |
| |
| void spitz_put_hsync(void) |
| { |
| put_device(spitz_pxafb_dev); |
| if (get_hsync_time) |
| symbol_put(pxafb_get_hsync_time); |
| spitz_pxafb_dev = NULL; |
| get_hsync_time = NULL; |
| } |
| |
| void spitz_wait_hsync(void) |
| { |
| sharpsl_wait_sync(SPITZ_GPIO_HSYNC); |
| } |
| #endif |
| |
| /* |
| * Corgi/Spitz Backlight Power |
| */ |
| #ifdef CONFIG_PXA_SHARP_C7xx |
| void corgi_bl_set_intensity(int intensity) |
| { |
| if (intensity > 0x10) |
| intensity += 0x10; |
| |
| /* Bits 0-4 are accessed via the SSP interface */ |
| corgi_ssp_blduty_set(intensity & 0x1f); |
| |
| /* Bit 5 is via SCOOP */ |
| if (intensity & 0x0020) |
| set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); |
| else |
| reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); |
| } |
| #endif |
| |
| |
| #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) |
| void spitz_bl_set_intensity(int intensity) |
| { |
| if (intensity > 0x10) |
| intensity += 0x10; |
| |
| /* Bits 0-4 are accessed via the SSP interface */ |
| corgi_ssp_blduty_set(intensity & 0x1f); |
| |
| /* Bit 5 is via SCOOP */ |
| if (intensity & 0x0020) |
| reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); |
| else |
| set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); |
| |
| if (intensity) |
| set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); |
| else |
| reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); |
| } |
| #endif |
| |
| #ifdef CONFIG_MACH_AKITA |
| void akita_bl_set_intensity(int intensity) |
| { |
| if (intensity > 0x10) |
| intensity += 0x10; |
| |
| /* Bits 0-4 are accessed via the SSP interface */ |
| corgi_ssp_blduty_set(intensity & 0x1f); |
| |
| /* Bit 5 is via IO-Expander */ |
| if (intensity & 0x0020) |
| akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); |
| else |
| akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); |
| |
| if (intensity) |
| akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); |
| else |
| akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); |
| } |
| #endif |
