Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: MCE: make cmci_discover_lock irq-safe
x86: xen, i386: reserve Xen pagetables
x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP
x86-64: finish cleanup_highmaps()'s job wrt. _brk_end
x86: fix boot hang in early_reserve_e820()
x86: Fix a typo in a printk message
x86, srat: do not register nodes beyond e820 map
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 90b3924..e87bdbf 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -17,6 +17,12 @@
usbcore.blinkenlights=1
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+ log_buf_len=1M print-fatal-signals=1
+can also be entered as
+ log-buf-len=1M print_fatal_signals=1
+
+
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
- apic= [APIC,i386] Advanced Programmable Interrupt Controller
+ apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
@@ -702,7 +708,7 @@
to discrete, to make X server driver able to add WB
entry later. This parameter enables that.
- enable_timer_pin_1 [i386,x86-64]
+ enable_timer_pin_1 [X86]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
@@ -775,7 +781,7 @@
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
- for IA-64, off otherwise.
+ for 64bit NUMA, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9faccc4..e60ec54 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -454,6 +454,7 @@
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index c367ae4..dcf8153 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar 3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -66,20 +66,20 @@
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -89,6 +89,7 @@
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -101,6 +102,7 @@
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -113,7 +115,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -142,6 +143,7 @@
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -162,6 +164,7 @@
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
@@ -217,6 +220,7 @@
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -237,6 +241,7 @@
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -249,6 +254,8 @@
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -293,7 +300,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -324,7 +330,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -357,6 +363,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,20 +372,20 @@
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
@@ -513,7 +520,6 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -592,8 +598,10 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -614,6 +622,7 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -687,6 +696,7 @@
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -724,8 +734,10 @@
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -763,6 +775,7 @@
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -777,6 +790,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -789,10 +803,11 @@
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
@@ -800,20 +815,20 @@
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -908,6 +923,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@@ -982,7 +998,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,15 +1097,17 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1152,11 +1169,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1198,7 +1215,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1215,6 +1231,7 @@
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -1245,7 +1262,11 @@
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1255,6 +1276,10 @@
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1329,7 +1354,9 @@
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1341,6 +1368,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -1361,6 +1389,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1419,6 +1452,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1430,7 +1464,6 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1502,6 +1535,9 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1538,10 +1574,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1551,11 +1589,15 @@
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1587,10 +1629,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1659,6 +1703,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1667,6 +1712,7 @@
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
@@ -1682,7 +1728,7 @@
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index b069872..398274b 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,11 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 02:57:32 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:22:12 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
@@ -22,8 +22,7 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -43,10 +42,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -54,32 +62,35 @@
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
@@ -87,10 +98,9 @@
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,12 +108,10 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -117,7 +125,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -127,11 +135,10 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -152,28 +159,23 @@
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Marvell MV78xx0 Implementations
#
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
@@ -199,6 +201,7 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
#
# Bus support
@@ -208,6 +211,8 @@
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -217,25 +222,33 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -248,6 +261,11 @@
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -263,6 +281,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -271,10 +291,6 @@
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -310,7 +326,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -325,6 +341,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -334,26 +351,23 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -368,6 +382,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -376,6 +392,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -429,9 +446,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@@ -456,6 +471,7 @@
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@@ -466,6 +482,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -486,10 +507,20 @@
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -547,7 +578,11 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -566,6 +601,8 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -632,11 +669,15 @@
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -644,7 +685,26 @@
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -654,19 +714,25 @@
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -676,18 +742,20 @@
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -701,6 +769,9 @@
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -709,7 +780,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -786,11 +860,11 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -799,44 +873,63 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +941,7 @@
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -855,14 +949,17 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -877,10 +974,15 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -900,20 +1002,28 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -944,10 +1054,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -958,9 +1064,36 @@
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,6 +1111,9 @@
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -986,12 +1122,15 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@@ -999,20 +1138,20 @@
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@@ -1028,7 +1167,6 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1041,7 +1179,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1049,7 +1187,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1059,14 +1196,29 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1074,7 +1226,12 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1105,6 +1262,8 @@
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1114,18 +1273,25 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1134,14 +1300,25 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1151,6 +1328,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1174,15 +1356,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1202,25 +1382,27 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1301,11 +1483,16 @@
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@@ -1320,22 +1507,55 @@
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1347,17 +1567,27 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1393,6 +1623,10 @@
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1422,25 +1656,32 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig
deleted file mode 100644
index e90f86d..0000000
--- a/arch/arm/configs/mx31moboard_defconfig
+++ /dev/null
@@ -1,790 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 24 11:41:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
-CONFIG_MACH_MX31MOBOARD=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 72a8201..20ada52 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -197,7 +197,7 @@
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 020e6a8..5b98f76 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Fri Aug 22 12:38:51 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:07:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -44,10 +42,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -55,48 +62,45 @@
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +108,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -124,7 +125,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -134,10 +135,10 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -158,14 +159,17 @@
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Orion Implementations
@@ -175,6 +179,7 @@
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
@@ -187,14 +192,6 @@
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
@@ -228,6 +225,8 @@
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -237,25 +236,32 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
@@ -270,6 +276,11 @@
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -285,13 +296,18 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -328,7 +344,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +359,15 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -352,27 +377,29 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -397,6 +424,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -450,9 +478,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@@ -477,6 +503,7 @@
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@@ -487,6 +514,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -507,11 +539,20 @@
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -569,7 +610,11 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -589,6 +634,7 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -663,6 +709,7 @@
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -670,7 +717,26 @@
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -680,19 +746,25 @@
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -702,10 +774,12 @@
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -713,6 +787,7 @@
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -727,6 +802,8 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -735,7 +812,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -819,11 +899,11 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -886,12 +966,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -911,14 +988,17 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -933,10 +1013,15 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -956,12 +1041,14 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -970,9 +1057,12 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1013,9 +1103,36 @@
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1030,10 +1147,13 @@
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -1042,12 +1162,15 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@@ -1055,20 +1178,20 @@
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@@ -1076,7 +1199,6 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1097,6 +1219,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1104,7 +1227,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1114,8 +1236,18 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1124,7 +1256,10 @@
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1132,7 +1267,12 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1164,6 +1304,7 @@
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1173,12 +1314,15 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1196,16 +1340,12 @@
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1214,14 +1354,25 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1231,6 +1382,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1254,15 +1410,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1282,6 +1436,7 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1290,6 +1445,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1381,13 +1537,16 @@
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@@ -1411,25 +1570,46 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1441,18 +1621,27 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1521,18 +1710,24 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
@@ -1540,7 +1735,7 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index d7da19b..c207504 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -45,13 +45,15 @@
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
-#define R_ARM_NONE 0
-#define R_ARM_PC24 1
-#define R_ARM_ABS32 2
-#define R_ARM_CALL 28
-#define R_ARM_JUMP24 29
-#define R_ARM_V4BX 40
-#define R_ARM_PREL31 42
+#define R_ARM_NONE 0
+#define R_ARM_PC24 1
+#define R_ARM_ABS32 2
+#define R_ARM_CALL 28
+#define R_ARM_JUMP24 29
+#define R_ARM_V4BX 40
+#define R_ARM_PREL31 42
+#define R_ARM_MOVW_ABS_NC 43
+#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d1731e3..bac03c8 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -169,6 +169,21 @@
*(u32 *)loc = offset & 0x7fffffff;
break;
+ case R_ARM_MOVW_ABS_NC:
+ case R_ARM_MOVT_ABS:
+ offset = *(u32 *)loc;
+ offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+ offset = (offset ^ 0x8000) - 0x8000;
+
+ offset += sym->st_value;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+ offset >>= 16;
+
+ *(u32 *)loc &= 0xfff0f000;
+ *(u32 *)loc |= ((offset & 0xf000) << 4) |
+ (offset & 0x0fff);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index c039674..b2e7f9c 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -211,7 +211,7 @@
},
};
-static u64 ide_dma_mask = DMA_32BIT_MASK;
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
static struct platform_device ide_dev = {
.name = "palm_bk3710",
@@ -220,7 +220,7 @@
.num_resources = ARRAY_SIZE(ide_resources),
.dev = {
.dma_mask = &ide_dma_mask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e66d90..17d3fbd 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -289,12 +289,12 @@
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index c9cfe40..a7417c4 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/cacheflush.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
@@ -39,6 +40,8 @@
{
unsigned long tmp;
+ flush_cache_all();
+
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index baf1c0f..8199972 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -40,6 +40,8 @@
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index e364a5e..7764643 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -693,12 +693,15 @@
local_irq_restore(flags);
return -EBUSY;
}
+ memset(imxdma, 0, sizeof(imxdma));
+ imxdma->name = name;
+ local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
NULL);
if (ret) {
- local_irq_restore(flags);
+ imxdma->name = NULL;
printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
MXC_INT_DMACH0 + channel, channel);
return ret;
@@ -708,13 +711,6 @@
imxdma->watchdog.data = channel;
#endif
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
-
- local_irq_restore(flags);
return ret;
}
EXPORT_SYMBOL(imx_dma_request);
@@ -737,10 +733,7 @@
local_irq_save(flags);
/* Disable interrupts */
- __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
- DMA_BASE + DMA_DIMR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
- DMA_BASE + DMA_CCR(channel));
+ imx_dma_disable(channel);
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index c6483ba..89e9579 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -124,7 +124,7 @@
irq_stat = __raw_readl(port->base + GPIO_ISR) &
__raw_readl(port->base + GPIO_IMR);
- BUG_ON(!irq_stat);
+
mxc_gpio_irq_handler(port, irq_stat);
}
#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 1cac9d1..d42f4e6 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -47,7 +47,7 @@
/*
* Base address of PBC controller, CS4
*/
-#define PBC_BASE_ADDRESS 0xEB000000
+#define PBC_BASE_ADDRESS 0xf4300000
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index cfe44ef..450ca6b 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -14,8 +14,8 @@
#include <asm/cpuinfo.h>
#include <asm/pvr.h>
-const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
-const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
#define err_printk(x) \
early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index ba0568c..31905ff 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -131,7 +131,7 @@
ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
break;
}
- return -EINVAL;
+ return ret;
}
asmlinkage int sys_vfork(struct pt_regs *regs)
diff --git a/drivers/base/iommu.c b/drivers/base/iommu.c
index 9f0e672..8ad4ffe 100644
--- a/drivers/base/iommu.c
+++ b/drivers/base/iommu.c
@@ -18,6 +18,8 @@
#include <linux/bug.h>
#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/iommu.h>
diff --git a/drivers/char/random.c b/drivers/char/random.c
index f824ef8..b2ced39 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1665,15 +1665,20 @@
* value is not cryptographically secure but for several uses the cost of
* depleting entropy is too high
*/
+DEFINE_PER_CPU(__u32 [4], get_random_int_hash);
unsigned int get_random_int(void)
{
- /*
- * Use IP's RNG. It suits our purpose perfectly: it re-keys itself
- * every second, from the entropy pool (and thus creates a limited
- * drain on it), and uses halfMD4Transform within the second. We
- * also mix it with jiffies and the PID:
- */
- return secure_ip_id((__force __be32)(current->pid + jiffies));
+ struct keydata *keyptr;
+ __u32 *hash = get_cpu_var(get_random_int_hash);
+ int ret;
+
+ keyptr = get_keyptr();
+ hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret;
+
+ ret = half_md4_transform(hash, keyptr->secret);
+ put_cpu_var(get_random_int_hash);
+
+ return ret;
}
/*
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index a2dee0e..e6ce632 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -400,6 +400,9 @@
case KIOCSOUND:
if (!perm)
goto eperm;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (arg)
arg = CLOCK_TICK_RATE / arg;
kd_mksound(arg, 0);
@@ -417,6 +420,9 @@
*/
ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
count = ticks ? (arg & 0xffff) : 0;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (count)
count = CLOCK_TICK_RATE / count;
kd_mksound(count, ticks);
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 0897ede..bff0103 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -348,6 +348,7 @@
return 0;
}
+#ifdef DEBUG
static char const *atk_sensor_type(union acpi_object *flags)
{
u64 type = flags->integer.value & ATK_TYPE_MASK;
@@ -370,6 +371,7 @@
return what;
}
+#endif
static void atk_print_sensor(struct atk_data *data, union acpi_object *obj)
{
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index dbfb30c..0bdab95 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1462,7 +1462,8 @@
data->pwm[i] =
w83781d_read_value(data,
W83781D_REG_PWM[i]);
- if ((data->type != w83782d || !client->driver)
+ /* Only W83782D on SMBus has PWM3 and PWM4 */
+ if ((data->type != w83782d || !client)
&& i == 1)
break;
}
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 1fb91ed..47c68bc 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -986,6 +986,9 @@
oldindex = index;
oldpage = page;
+ bitmap->filemap[bitmap->file_pages++] = page;
+ bitmap->last_page_size = count;
+
if (outofdate) {
/*
* if bitmap is out of date, dirty the
@@ -998,15 +1001,9 @@
write_page(bitmap, page, 1);
ret = -EIO;
- if (bitmap->flags & BITMAP_WRITE_ERROR) {
- /* release, page not in filemap yet */
- put_page(page);
+ if (bitmap->flags & BITMAP_WRITE_ERROR)
goto err;
- }
}
-
- bitmap->filemap[bitmap->file_pages++] = page;
- bitmap->last_page_size = count;
}
paddr = kmap_atomic(page, KM_USER0);
if (bitmap->flags & BITMAP_HOSTENDIAN)
@@ -1016,9 +1013,11 @@
kunmap_atomic(paddr, KM_USER0);
if (b) {
/* if the disk bit is set, set the memory bit */
- bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap),
- ((i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) >= start)
- );
+ int needed = ((sector_t)(i+1) << (CHUNK_BLOCK_SHIFT(bitmap))
+ >= start);
+ bitmap_set_memory_bits(bitmap,
+ (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
+ needed);
bit_cnt++;
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
@@ -1154,8 +1153,9 @@
spin_lock_irqsave(&bitmap->lock, flags);
clear_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
- bmc = bitmap_get_counter(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
- &blocks, 0);
+ bmc = bitmap_get_counter(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
+ &blocks, 0);
if (bmc) {
/*
if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
@@ -1169,7 +1169,8 @@
} else if (*bmc == 1) {
/* we can clear the bit */
*bmc = 0;
- bitmap_count_page(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
+ bitmap_count_page(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
-1);
/* clear the bit */
@@ -1514,7 +1515,7 @@
unsigned long chunk;
for (chunk = s; chunk <= e; chunk++) {
- sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap);
+ sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap);
bitmap_set_memory_bits(bitmap, sec, 1);
bitmap_file_set_bit(bitmap, sec);
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 612343f..fccc834 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3066,11 +3066,8 @@
} else
err = -EBUSY;
spin_unlock_irq(&mddev->write_lock);
- } else {
- mddev->ro = 0;
- mddev->recovery_cp = MaxSector;
- err = do_md_run(mddev);
- }
+ } else
+ err = -EINVAL;
break;
case active:
if (mddev->pers) {
@@ -4297,6 +4294,7 @@
{
int err = 0;
struct gendisk *disk = mddev->gendisk;
+ mdk_rdev_t *rdev;
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
@@ -4339,6 +4337,13 @@
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ }
+
set_capacity(disk, 0);
mddev->changed = 1;
@@ -4359,7 +4364,6 @@
* Free resources if final stop
*/
if (mode == 0) {
- mdk_rdev_t *rdev;
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
@@ -4371,13 +4375,6 @@
}
mddev->bitmap_offset = 0;
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0) {
- char nm[20];
- sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_remove_link(&mddev->kobj, nm);
- }
-
/* make sure all md_delayed_delete calls have finished */
flush_scheduled_work();
@@ -5705,37 +5702,38 @@
static void status_resync(struct seq_file *seq, mddev_t * mddev)
{
- sector_t max_blocks, resync, res;
- unsigned long dt, db, rt;
+ sector_t max_sectors, resync, res;
+ unsigned long dt, db;
+ sector_t rt;
int scale;
unsigned int per_milli;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2;
+ resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
- max_blocks = mddev->resync_max_sectors >> 1;
+ max_sectors = mddev->resync_max_sectors;
else
- max_blocks = mddev->dev_sectors / 2;
+ max_sectors = mddev->dev_sectors;
/*
* Should not happen.
*/
- if (!max_blocks) {
+ if (!max_sectors) {
MD_BUG();
return;
}
/* Pick 'scale' such that (resync>>scale)*1000 will fit
- * in a sector_t, and (max_blocks>>scale) will fit in a
+ * in a sector_t, and (max_sectors>>scale) will fit in a
* u32, as those are the requirements for sector_div.
* Thus 'scale' must be at least 10
*/
scale = 10;
if (sizeof(sector_t) > sizeof(unsigned long)) {
- while ( max_blocks/2 > (1ULL<<(scale+32)))
+ while ( max_sectors/2 > (1ULL<<(scale+32)))
scale++;
}
res = (resync>>scale)*1000;
- sector_div(res, (u32)((max_blocks>>scale)+1));
+ sector_div(res, (u32)((max_sectors>>scale)+1));
per_milli = res;
{
@@ -5756,25 +5754,35 @@
(test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ?
"resync" : "recovery"))),
per_milli/10, per_milli % 10,
- (unsigned long long) resync,
- (unsigned long long) max_blocks);
+ (unsigned long long) resync/2,
+ (unsigned long long) max_sectors/2);
/*
- * We do not want to overflow, so the order of operands and
- * the * 100 / 100 trick are important. We do a +1 to be
- * safe against division by zero. We only estimate anyway.
- *
* dt: time from mark until now
* db: blocks written from mark until now
* rt: remaining time
+ *
+ * rt is a sector_t, so could be 32bit or 64bit.
+ * So we divide before multiply in case it is 32bit and close
+ * to the limit.
+ * We scale the divisor (db) by 32 to avoid loosing precision
+ * near the end of resync when the number of remaining sectors
+ * is close to 'db'.
+ * We then divide rt by 32 after multiplying by db to compensate.
+ * The '+1' avoids division by zero if db is very small.
*/
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
- mddev->resync_mark_cnt;
- rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
- seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
+ rt = max_sectors - resync; /* number of remaining sectors */
+ sector_div(rt, db/32+1);
+ rt *= dt;
+ rt >>= 5;
+
+ seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60,
+ ((unsigned long)rt % 60)/6);
seq_printf(seq, " speed=%ldK/sec", db/2/dt);
}
@@ -5965,7 +5973,7 @@
return 0;
}
-static struct seq_operations md_seq_ops = {
+static const struct seq_operations md_seq_ops = {
.start = md_seq_start,
.next = md_seq_next,
.stop = md_seq_stop,
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 81a54f1..499620a 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1809,17 +1809,17 @@
r10_bio->sector = sect;
raid10_find_phys(conf, r10_bio);
- /* Need to check if this section will still be
+
+ /* Need to check if the array will still be
* degraded
*/
- for (j=0; j<conf->copies;j++) {
- int d = r10_bio->devs[j].devnum;
- if (conf->mirrors[d].rdev == NULL ||
- test_bit(Faulty, &conf->mirrors[d].rdev->flags)) {
+ for (j=0; j<conf->raid_disks; j++)
+ if (conf->mirrors[j].rdev == NULL ||
+ test_bit(Faulty, &conf->mirrors[j].rdev->flags)) {
still_degraded = 1;
break;
}
- }
+
must_sync = bitmap_start_sync(mddev->bitmap, sect,
&sync_blocks, still_degraded);
diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
index 2e2a592..a71e245 100644
--- a/drivers/misc/isl29003.c
+++ b/drivers/misc/isl29003.c
@@ -64,6 +64,7 @@
struct i2c_client *client;
struct mutex lock;
u8 reg_cache[ISL29003_NUM_CACHABLE_REGS];
+ u8 power_state_before_suspend;
};
static int gain_range[] = {
@@ -411,6 +412,9 @@
#ifdef CONFIG_PM
static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg)
{
+ struct isl29003_data *data = i2c_get_clientdata(client);
+
+ data->power_state_before_suspend = isl29003_get_power_state(client);
return isl29003_set_power_state(client, 0);
}
@@ -421,10 +425,11 @@
/* restore registers from cache */
for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++)
- if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
+ if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
return -EIO;
- return 0;
+ return isl29003_set_power_state(client,
+ data->power_state_before_suspend);
}
#else
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 8871aaa..c0a3e27 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -130,8 +130,6 @@
struct pci_dev *pci_dev;
u32 maxports; /* MAX ports this board can handle */
- spinlock_t bd_lock; /* Used to protect board */
-
spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
* the interrupt routine from each other.
*/
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index d2d32a1..b3604aa 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -88,7 +88,6 @@
else
brd->maxports = 2;
- spin_lock_init(&brd->bd_lock);
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 06936d1..3e37852 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -102,6 +102,7 @@
.name = "Samsung S3C6400 UART",
.type = PORT_S3C6400,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index e06686a..93b5d75 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -508,6 +508,7 @@
struct baud_calc {
struct s3c24xx_uart_clksrc *clksrc;
unsigned int calc;
+ unsigned int divslot;
unsigned int quot;
struct clk *src;
};
@@ -517,6 +518,7 @@
struct s3c24xx_uart_clksrc *clksrc,
unsigned int baud)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long rate;
calc->src = clk_get(port->dev, clksrc->name);
@@ -527,8 +529,24 @@
rate /= clksrc->divisor;
calc->clksrc = clksrc;
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we calculated
+ * by not multiplying the baud by 16) as it is easy enough
+ * to recalculate.
+ */
+
+ calc->quot = div / 16;
+ calc->calc = rate / div;
+ } else {
+ calc->quot = (rate + (8 * baud)) / (16 * baud);
+ calc->calc = (rate / (calc->quot * 16));
+ }
calc->quot--;
return 1;
@@ -611,6 +629,30 @@
return best->quot;
}
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static u16 udivslot_table[16] = {
+ [0] = 0x0000,
+ [1] = 0x0080,
+ [2] = 0x0808,
+ [3] = 0x0888,
+ [4] = 0x2222,
+ [5] = 0x4924,
+ [6] = 0x4A52,
+ [7] = 0x54AA,
+ [8] = 0x5555,
+ [9] = 0xD555,
+ [10] = 0xD5D5,
+ [11] = 0xDDD5,
+ [12] = 0xDDDD,
+ [13] = 0xDFDD,
+ [14] = 0xDFDF,
+ [15] = 0xFFDF,
+};
+
static void s3c24xx_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
@@ -623,6 +665,7 @@
unsigned int baud, quot;
unsigned int ulcon;
unsigned int umcon;
+ unsigned int udivslot = 0;
/*
* We don't support modem control lines.
@@ -644,6 +687,7 @@
/* check to see if we need to change clock source */
if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+ dbg("selecting clock %p\n", clk);
s3c24xx_serial_setsource(port, clksrc);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
@@ -658,6 +702,13 @@
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
+ if (ourport->info->has_divslot) {
+ unsigned int div = ourport->baudclk_rate / baud;
+
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
+
switch (termios->c_cflag & CSIZE) {
case CS5:
dbg("config: 5bits/char\n");
@@ -697,12 +748,16 @@
spin_lock_irqsave(&port->lock, flags);
- dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+ dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+ ulcon, quot, udivslot);
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
wr_regl(port, S3C2410_UMCON, umcon);
+ if (ourport->info->has_divslot)
+ wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
rd_regl(port, S3C2410_ULCON),
rd_regl(port, S3C2410_UCON),
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 571d6b9..7afb948 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -21,6 +21,10 @@
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ /* uart port features */
+
+ unsigned int has_divslot:1;
+
/* clock source control */
int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0dbd6c6..d8d0be5 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -56,7 +56,6 @@
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_FM2) += fm2fb.o
obj-$(CONFIG_FB_VT8623) += vt8623fb.o
-obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
obj-$(CONFIG_FB_LE80578) += vermilion/
obj-$(CONFIG_FB_S3) += s3fb.o
diff --git a/drivers/video/cfbfillrect.c b/drivers/video/cfbfillrect.c
index 64b3576..ba9f58b 100644
--- a/drivers/video/cfbfillrect.c
+++ b/drivers/video/cfbfillrect.c
@@ -9,10 +9,6 @@
*
* NOTES:
*
- * The code for depths like 24 that don't have integer number of pixels per
- * long is broken and needs to be fixed. For now I turned these types of
- * mode off.
- *
* Also need to add code to deal with cards endians that are different than
* the native cpu endians. I also need to deal with MSB position in the word.
*
@@ -139,7 +135,7 @@
// Trailing bits
if (last)
- FB_WRITEL(comp(pat, FB_READL(dst), first), dst);
+ FB_WRITEL(comp(pat, FB_READL(dst), last), dst);
}
}
@@ -281,7 +277,7 @@
void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
@@ -297,7 +293,7 @@
else
fg = rect->color;
- pat = pixel_to_pat( bpp, fg);
+ pat = pixel_to_pat(bpp, fg);
dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1));
dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8;
@@ -333,17 +329,16 @@
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
@@ -352,17 +347,18 @@
fill_op = bitfill_unaligned;
break;
default:
- printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
+ printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
diff --git a/drivers/video/fb_draw.h b/drivers/video/fb_draw.h
index 1db6221..04c01fa 100644
--- a/drivers/video/fb_draw.h
+++ b/drivers/video/fb_draw.h
@@ -33,11 +33,11 @@
case 8:
return 0x0101010101010101ul*pixel;
case 12:
- return 0x0001001001001001ul*pixel;
+ return 0x1001001001001001ul*pixel;
case 16:
return 0x0001000100010001ul*pixel;
case 24:
- return 0x0000000001000001ul*pixel;
+ return 0x0001000001000001ul*pixel;
case 32:
return 0x0000000100000001ul*pixel;
default:
@@ -58,11 +58,11 @@
case 8:
return 0x01010101ul*pixel;
case 12:
- return 0x00001001ul*pixel;
+ return 0x01001001ul*pixel;
case 16:
return 0x00010001ul*pixel;
case 24:
- return 0x00000001ul*pixel;
+ return 0x01000001ul*pixel;
case 32:
return 0x00000001ul*pixel;
default:
@@ -167,4 +167,17 @@
#endif /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */
+#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG)
+#define _cpu_to_le_long(x) __cpu_to_le_long(x)
+#define __cpu_to_le_long(x) cpu_to_le##x
+
+#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG)
+#define _le_long_to_cpu(x) __le_long_to_cpu(x)
+#define __le_long_to_cpu(x) le##x##_to_cpu
+
+static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x)
+{
+ return (word << shift) | (word >> (x - shift));
+}
+
#endif /* FB_DRAW_H */
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 21b3692..9894de1 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -1152,11 +1152,11 @@
*/
static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 1);
+ fb_set_suspend(mx3fb->fbi, 1);
release_console_sem();
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
@@ -1172,16 +1172,16 @@
*/
static int mx3fb_resume(struct platform_device *pdev)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
}
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 0);
+ fb_set_suspend(mx3fb->fbi, 0);
release_console_sem();
return 0;
diff --git a/drivers/video/sysfillrect.c b/drivers/video/sysfillrect.c
index f94d6b6..33ee3d3 100644
--- a/drivers/video/sysfillrect.c
+++ b/drivers/video/sysfillrect.c
@@ -124,7 +124,7 @@
/* Trailing bits */
if (last)
- *dst = comp(pat, *dst, first);
+ *dst = comp(pat, *dst, last);
}
}
@@ -242,7 +242,7 @@
void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
@@ -292,17 +292,16 @@
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
@@ -311,18 +310,19 @@
fill_op = bitfill_unaligned;
break;
default:
- printk(KERN_ERR "cfb_fillrect(): unknown rop, "
+ printk(KERN_ERR "sys_fillrect(): unknown rop, "
"defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 9d1fb6e..f20c406 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,16 @@
+Version 1.58
+------------
+Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
+when the UTF-8 string is composed of unusually long (more than 4 byte) converted
+characters. Add support for mounting root of a share which redirects immediately
+to DFS target. Convert string conversion functions from Unicode to more
+accurately mark string length before allocating memory (which may help the
+rare cases where a UTF-8 string is much larger than the UCS2 string that
+we converted from). Fix endianness of the vcnum field used during
+session setup to distinguish multiple mounts to same server from different
+userids. Raw NTLMSSP fixed (it requires /proc/fs/cifs/experimental
+flag to be set to 2, and mount must enable krb5 to turn on extended security).
+
Version 1.57
------------
Improve support for multiple security contexts to the same server. We
diff --git a/fs/cifs/README b/fs/cifs/README
index 0743418..db208ddb 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -651,7 +651,15 @@
signing turned on in case buffer was modified
just before it was sent, also this flag will
be used to use the new experimental directory change
- notification code).
+ notification code). When set to 2 enables
+ an additional experimental feature, "raw ntlmssp"
+ session establishment support (which allows
+ specifying "sec=ntlmssp" on mount). The Linux cifs
+ module will use ntlmv2 authentication encapsulated
+ in "raw ntlmssp" (not using SPNEGO) when
+ "sec=ntlmssp" is specified on mount.
+ This support also requires building cifs with
+ the CONFIG_CIFS_EXPERIMENTAL configuration flag.
These experimental features and tracing can be enabled by changing flags in
/proc/fs/cifs (after the cifs module has been installed or built into the
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 5fdbf8a..83d6275 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -340,28 +340,24 @@
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
for (i = 0; i < num_referrals; i++) {
+ int len;
dump_referral(referrals+i);
- /* connect to a storage node */
- if (referrals[i].flags & DFSREF_STORAGE_SERVER) {
- int len;
- len = strlen(referrals[i].node_name);
- if (len < 2) {
- cERROR(1, ("%s: Net Address path too short: %s",
+ /* connect to a node */
+ len = strlen(referrals[i].node_name);
+ if (len < 2) {
+ cERROR(1, ("%s: Net Address path too short: %s",
__func__, referrals[i].node_name));
- rc = -EINVAL;
- goto out_err;
- }
- mnt = cifs_dfs_do_refmount(nd->path.mnt,
- nd->path.dentry,
- referrals + i);
- cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
- __func__,
+ rc = -EINVAL;
+ goto out_err;
+ }
+ mnt = cifs_dfs_do_refmount(nd->path.mnt,
+ nd->path.dentry, referrals + i);
+ cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
referrals[i].node_name, mnt));
- /* complete mount procedure if we accured submount */
- if (!IS_ERR(mnt))
- break;
- }
+ /* complete mount procedure if we accured submount */
+ if (!IS_ERR(mnt))
+ break;
}
/* we need it cause for() above could exit without valid submount */
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 7d75272..60e3c42 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifs_unicode.c
*
- * Copyright (c) International Business Machines Corp., 2000,2005
+ * Copyright (c) International Business Machines Corp., 2000,2009
* Modified by Steve French (sfrench@us.ibm.com)
*
* This program is free software; you can redistribute it and/or modify
@@ -26,31 +26,157 @@
#include "cifs_debug.h"
/*
- * NAME: cifs_strfromUCS()
+ * cifs_ucs2_bytes - how long will a string be after conversion?
+ * @ucs - pointer to input string
+ * @maxbytes - don't go past this many bytes of input string
+ * @codepage - destination codepage
*
- * FUNCTION: Convert little-endian unicode string to character string
- *
+ * Walk a ucs2le string and return the number of bytes that the string will
+ * be after being converted to the given charset, not including any null
+ * termination required. Don't walk past maxbytes in the source buffer.
*/
int
-cifs_strfromUCS_le(char *to, const __le16 *from,
- int len, const struct nls_table *codepage)
+cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage)
{
int i;
- int outlen = 0;
+ int charlen, outlen = 0;
+ int maxwords = maxbytes / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
- for (i = 0; (i < len) && from[i]; i++) {
- int charlen;
- /* 2.4.0 kernel or greater */
- charlen =
- codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
- NLS_MAX_CHARSET_SIZE);
- if (charlen > 0) {
+ for (i = 0; from[i] && i < maxwords; i++) {
+ charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
+ NLS_MAX_CHARSET_SIZE);
+ if (charlen > 0)
outlen += charlen;
- } else {
- to[outlen++] = '?';
- }
+ else
+ outlen++;
}
- to[outlen] = 0;
+
+ return outlen;
+}
+
+/*
+ * cifs_mapchar - convert a little-endian char to proper char in codepage
+ * @target - where converted character should be copied
+ * @src_char - 2 byte little-endian source character
+ * @cp - codepage to which character should be converted
+ * @mapchar - should character be mapped according to mapchars mount option?
+ *
+ * This function handles the conversion of a single character. It is the
+ * responsibility of the caller to ensure that the target buffer is large
+ * enough to hold the result of the conversion (at least NLS_MAX_CHARSET_SIZE).
+ */
+static int
+cifs_mapchar(char *target, const __le16 src_char, const struct nls_table *cp,
+ bool mapchar)
+{
+ int len = 1;
+
+ if (!mapchar)
+ goto cp_convert;
+
+ /*
+ * BB: Cannot handle remapping UNI_SLASH until all the calls to
+ * build_path_from_dentry are modified, as they use slash as
+ * separator.
+ */
+ switch (le16_to_cpu(src_char)) {
+ case UNI_COLON:
+ *target = ':';
+ break;
+ case UNI_ASTERIK:
+ *target = '*';
+ break;
+ case UNI_QUESTION:
+ *target = '?';
+ break;
+ case UNI_PIPE:
+ *target = '|';
+ break;
+ case UNI_GRTRTHAN:
+ *target = '>';
+ break;
+ case UNI_LESSTHAN:
+ *target = '<';
+ break;
+ default:
+ goto cp_convert;
+ }
+
+out:
+ return len;
+
+cp_convert:
+ len = cp->uni2char(le16_to_cpu(src_char), target,
+ NLS_MAX_CHARSET_SIZE);
+ if (len <= 0) {
+ *target = '?';
+ len = 1;
+ }
+ goto out;
+}
+
+/*
+ * cifs_from_ucs2 - convert utf16le string to local charset
+ * @to - destination buffer
+ * @from - source buffer
+ * @tolen - destination buffer size (in bytes)
+ * @fromlen - source buffer size (in bytes)
+ * @codepage - codepage to which characters should be converted
+ * @mapchar - should characters be remapped according to the mapchars option?
+ *
+ * Convert a little-endian ucs2le string (as sent by the server) to a string
+ * in the provided codepage. The tolen and fromlen parameters are to ensure
+ * that the code doesn't walk off of the end of the buffer (which is always
+ * a danger if the alignment of the source buffer is off). The destination
+ * string is always properly null terminated and fits in the destination
+ * buffer. Returns the length of the destination string in bytes (including
+ * null terminator).
+ *
+ * Note that some windows versions actually send multiword UTF-16 characters
+ * instead of straight UCS-2. The linux nls routines however aren't able to
+ * deal with those characters properly. In the event that we get some of
+ * those characters, they won't be translated properly.
+ */
+int
+cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar)
+{
+ int i, charlen, safelen;
+ int outlen = 0;
+ int nullsize = nls_nullsize(codepage);
+ int fromwords = fromlen / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ /*
+ * because the chars can be of varying widths, we need to take care
+ * not to overflow the destination buffer when we get close to the
+ * end of it. Until we get to this offset, we don't need to check
+ * for overflow however.
+ */
+ safelen = tolen - (NLS_MAX_CHARSET_SIZE + nullsize);
+
+ for (i = 0; i < fromwords && from[i]; i++) {
+ /*
+ * check to see if converting this character might make the
+ * conversion bleed into the null terminator
+ */
+ if (outlen >= safelen) {
+ charlen = cifs_mapchar(tmp, from[i], codepage, mapchar);
+ if ((outlen + charlen) > (tolen - nullsize))
+ break;
+ }
+
+ /* put converted char into 'to' buffer */
+ charlen = cifs_mapchar(&to[outlen], from[i], codepage, mapchar);
+ outlen += charlen;
+ }
+
+ /* properly null-terminate string */
+ for (i = 0; i < nullsize; i++)
+ to[outlen++] = 0;
+
return outlen;
}
@@ -88,3 +214,41 @@
return i;
}
+/*
+ * cifs_strndup_from_ucs - copy a string from wire format to the local codepage
+ * @src - source string
+ * @maxlen - don't walk past this many bytes in the source string
+ * @is_unicode - is this a unicode string?
+ * @codepage - destination codepage
+ *
+ * Take a string given by the server, convert it to the local codepage and
+ * put it in a new buffer. Returns a pointer to the new string or NULL on
+ * error.
+ */
+char *
+cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
+ const struct nls_table *codepage)
+{
+ int len;
+ char *dst;
+
+ if (is_unicode) {
+ len = cifs_ucs2_bytes((__le16 *) src, maxlen, codepage);
+ len += nls_nullsize(codepage);
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ cifs_from_ucs2(dst, (__le16 *) src, len, maxlen, codepage,
+ false);
+ } else {
+ len = strnlen(src, maxlen);
+ len++;
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ strlcpy(dst, src, len);
+ }
+
+ return dst;
+}
+
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 14eb9a2..6506382 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -5,7 +5,7 @@
* Convert a unicode character to upper or lower case using
* compressed tables.
*
- * Copyright (c) International Business Machines Corp., 2000,2007
+ * Copyright (c) International Business Machines Corp., 2000,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -37,6 +37,19 @@
#define UNIUPR_NOLOWER /* Example to not expand lower case tables */
+/*
+ * Windows maps these to the user defined 16 bit Unicode range since they are
+ * reserved symbols (along with \ and /), otherwise illegal to store
+ * in filenames in NTFS
+ */
+#define UNI_ASTERIK (__u16) ('*' + 0xF000)
+#define UNI_QUESTION (__u16) ('?' + 0xF000)
+#define UNI_COLON (__u16) (':' + 0xF000)
+#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
+#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
+#define UNI_PIPE (__u16) ('|' + 0xF000)
+#define UNI_SLASH (__u16) ('\\' + 0xF000)
+
/* Just define what we want from uniupr.h. We don't want to define the tables
* in each source file.
*/
@@ -59,8 +72,14 @@
#endif /* UNIUPR_NOLOWER */
#ifdef __KERNEL__
-int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
+int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar);
+int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage);
int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
+char *cifs_strndup_from_ucs(const char *src, const int maxlen,
+ const bool is_unicode,
+ const struct nls_table *codepage);
#endif
/*
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 77e190d..051b71c 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -100,5 +100,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.57"
+#define CIFS_VERSION "1.58"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index df40ab6..a61ab77 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -82,8 +82,8 @@
LANMAN, /* Legacy LANMAN auth */
NTLM, /* Legacy NTLM012 auth with NTLM hash */
NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */
- RawNTLMSSP, /* NTLMSSP without SPNEGO */
- NTLMSSP, /* NTLMSSP via SPNEGO */
+ RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */
+ NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */
Kerberos, /* Kerberos via SPNEGO */
MSKerberos, /* MS Kerberos via SPNEGO */
};
@@ -531,6 +531,7 @@
#define CIFSSEC_MAY_PLNTXT 0
#endif /* weak passwords */
#define CIFSSEC_MAY_SEAL 0x00040 /* not supported yet */
+#define CIFSSEC_MAY_NTLMSSP 0x00080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_MUST_SIGN 0x01001
/* note that only one of the following can be set so the
@@ -543,22 +544,23 @@
#define CIFSSEC_MUST_LANMAN 0x10010
#define CIFSSEC_MUST_PLNTXT 0x20020
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x3F03F /* allows weak security but also krb5 */
+#define CIFSSEC_MASK 0xAF0AF /* allows weak security but also krb5 */
#else
-#define CIFSSEC_MASK 0x37037 /* current flags supported if weak */
+#define CIFSSEC_MASK 0xA70A7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x0F00F /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x8F08F /* flags supported if no weak allowed */
#else
-#define CIFSSEC_MASK 0x07007 /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x87087 /* flags supported if no weak allowed */
#endif /* UPCALL */
#endif /* WEAK_PW_HASH */
#define CIFSSEC_MUST_SEAL 0x40040 /* not supported yet */
+#define CIFSSEC_MUST_NTLMSSP 0x80080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
#define CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
-#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
+#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5 | CIFSSEC_MAY_NTLMSSP)
/*
*****************************************************************
* All constants go here
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 4167716..fae0839 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -260,8 +260,7 @@
const struct nls_table *nls_codepage);
extern int CIFSSMBUnixQuerySymLink(const int xid,
struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *syminfo, const int buflen,
+ const unsigned char *searchName, char **syminfo,
const struct nls_table *nls_codepage);
extern int CIFSSMBQueryReparseLinkInfo(const int xid,
struct cifsTconInfo *tcon,
@@ -307,8 +306,6 @@
const unsigned char *searchName, __u64 *inode_number,
const struct nls_table *nls_codepage,
int remap_special_chars);
-extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *codepage);
extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
const struct nls_table *cp, int mapChars);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a0845dc..75e6623 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifssmb.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Contains the routines for constructing the SMB PDUs themselves
@@ -81,41 +81,6 @@
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
-/* Allocates buffer into dst and copies smb string from src to it.
- * caller is responsible for freeing dst if function returned 0.
- * returns:
- * on success - 0
- * on failure - errno
- */
-static int
-cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
- const bool is_unicode, const struct nls_table *nls_codepage)
-{
- int plen;
-
- if (is_unicode) {
- plen = UniStrnlen((wchar_t *)src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
- } else {
- plen = strnlen(src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- strncpy(*dst, src, plen);
- }
- (*dst)[plen] = 0;
- (*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
- return 0;
-
-cifs_strncpy_to_host_ErrExit:
- cERROR(1, ("Failed to allocate buffer for string\n"));
- return -ENOMEM;
-}
-
-
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
@@ -484,6 +449,14 @@
cFYI(1, ("Kerberos only mechanism, enable extended security"));
pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
}
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ else if ((secFlags & CIFSSEC_MUST_NTLMSSP) == CIFSSEC_MUST_NTLMSSP)
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ else if ((secFlags & CIFSSEC_AUTH_MASK) == CIFSSEC_MAY_NTLMSSP) {
+ cFYI(1, ("NTLMSSP only mechanism, enable extended security"));
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ }
+#endif
count = 0;
for (i = 0; i < CIFS_NUM_PROT; i++) {
@@ -620,6 +593,8 @@
server->secType = NTLMv2;
else if (secFlags & CIFSSEC_MAY_KRB5)
server->secType = Kerberos;
+ else if (secFlags & CIFSSEC_MAY_NTLMSSP)
+ server->secType = NTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
/* #ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -2417,8 +2392,7 @@
int
CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *symlinkinfo, const int buflen,
+ const unsigned char *searchName, char **symlinkinfo,
const struct nls_table *nls_codepage)
{
/* SMB_QUERY_FILE_UNIX_LINK */
@@ -2428,6 +2402,7 @@
int bytes_returned;
int name_len;
__u16 params, byte_count;
+ char *data_start;
cFYI(1, ("In QPathSymLinkInfo (Unix) for path %s", searchName));
@@ -2482,30 +2457,26 @@
/* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 2))
/* BB also check enough total bytes returned */
- rc = -EIO; /* bad smb */
+ if (rc || (pSMBr->ByteCount < 2))
+ rc = -EIO;
else {
- __u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- __u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+ bool is_unicode;
+ u16 count = le16_to_cpu(pSMBr->t2.DataCount);
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *) ((char *)
- &pSMBr->hdr.Protocol + data_offset),
- min_t(const int, buflen, count) / 2);
+ data_start = ((char *) &pSMBr->hdr.Protocol) +
+ le16_to_cpu(pSMBr->t2.DataOffset);
+
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
+
/* BB FIXME investigate remapping reserved chars here */
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) ((char *)&pSMBr->hdr.Protocol
- + data_offset),
- name_len, nls_codepage);
- } else {
- strncpy(symlinkinfo,
- (char *) &pSMBr->hdr.Protocol +
- data_offset,
- min_t(const int, buflen, count));
- }
- symlinkinfo[buflen] = 0;
- /* just in case so calling code does not go off the end of buffer */
+ *symlinkinfo = cifs_strndup_from_ucs(data_start, count,
+ is_unicode, nls_codepage);
+ if (!symlinkinfo)
+ rc = -ENOMEM;
}
}
cifs_buf_release(pSMB);
@@ -2603,7 +2574,6 @@
*pparmlen = parm_count;
return 0;
}
-#endif /* CIFS_EXPERIMENTAL */
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
@@ -2613,7 +2583,6 @@
{
int rc = 0;
int bytes_returned;
- int name_len;
struct smb_com_transaction_ioctl_req *pSMB;
struct smb_com_transaction_ioctl_rsp *pSMBr;
@@ -2650,59 +2619,55 @@
} else { /* decode response */
__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
__u32 data_count = le32_to_cpu(pSMBr->DataCount);
- if ((pSMBr->ByteCount < 2) || (data_offset > 512))
+ if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
/* BB also check enough total bytes returned */
rc = -EIO; /* bad smb */
- else {
- if (data_count && (data_count < 2048)) {
- char *end_of_smb = 2 /* sizeof byte count */ +
- pSMBr->ByteCount +
- (char *)&pSMBr->ByteCount;
+ goto qreparse_out;
+ }
+ if (data_count && (data_count < 2048)) {
+ char *end_of_smb = 2 /* sizeof byte count */ +
+ pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
- struct reparse_data *reparse_buf =
+ struct reparse_data *reparse_buf =
(struct reparse_data *)
((char *)&pSMBr->hdr.Protocol
+ data_offset);
- if ((char *)reparse_buf >= end_of_smb) {
- rc = -EIO;
- goto qreparse_out;
- }
- if ((reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset +
- reparse_buf->TargetNameLen) >
- end_of_smb) {
- cFYI(1, ("reparse buf beyond SMB"));
- rc = -EIO;
- goto qreparse_out;
- }
+ if ((char *)reparse_buf >= end_of_smb) {
+ rc = -EIO;
+ goto qreparse_out;
+ }
+ if ((reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset +
+ reparse_buf->TargetNameLen) > end_of_smb) {
+ cFYI(1, ("reparse buf beyond SMB"));
+ rc = -EIO;
+ goto qreparse_out;
+ }
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *)
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
+ cifs_from_ucs2(symlinkinfo, (__le16 *)
(reparse_buf->LinkNamesBuf +
reparse_buf->TargetNameOffset),
- min(buflen/2,
- reparse_buf->TargetNameLen / 2));
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) (reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset),
- name_len, nls_codepage);
- } else { /* ASCII names */
- strncpy(symlinkinfo,
- reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset,
- min_t(const int, buflen,
- reparse_buf->TargetNameLen));
- }
- } else {
- rc = -EIO;
- cFYI(1, ("Invalid return data count on "
- "get reparse info ioctl"));
+ buflen,
+ reparse_buf->TargetNameLen,
+ nls_codepage, 0);
+ } else { /* ASCII names */
+ strncpy(symlinkinfo,
+ reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset,
+ min_t(const int, buflen,
+ reparse_buf->TargetNameLen));
}
- symlinkinfo[buflen] = 0; /* just in case so the caller
- does not go off the end of the buffer */
- cFYI(1, ("readlink result - %s", symlinkinfo));
+ } else {
+ rc = -EIO;
+ cFYI(1, ("Invalid return data count on "
+ "get reparse info ioctl"));
}
+ symlinkinfo[buflen] = 0; /* just in case so the caller
+ does not go off the end of the buffer */
+ cFYI(1, ("readlink result - %s", symlinkinfo));
}
+
qreparse_out:
cifs_buf_release(pSMB);
@@ -2711,6 +2676,7 @@
return rc;
}
+#endif /* CIFS_EXPERIMENTAL */
#ifdef CONFIG_CIFS_POSIX
@@ -3928,27 +3894,6 @@
return rc;
}
-/* computes length of UCS string converted to host codepage
- * @src: UCS string
- * @maxlen: length of the input string in UCS characters
- * (not in bytes)
- *
- * return: size of input string in host codepage
- */
-static int hostlen_fromUCS(const __le16 *src, const int maxlen,
- const struct nls_table *nls_codepage) {
- int i;
- int hostlen = 0;
- char to[4];
- int charlen;
- for (i = 0; (i < maxlen) && src[i]; ++i) {
- charlen = nls_codepage->uni2char(le16_to_cpu(src[i]),
- to, NLS_MAX_CHARSET_SIZE);
- hostlen += charlen > 0 ? charlen : 1;
- }
- return hostlen;
-}
-
/* parses DFS refferal V3 structure
* caller is responsible for freeing target_nodes
* returns:
@@ -3994,7 +3939,7 @@
cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
*num_of_nodes,
- le16_to_cpu(pSMBr->DFSFlags)));
+ le32_to_cpu(pSMBr->DFSFlags)));
*target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
*num_of_nodes, GFP_KERNEL);
@@ -4010,14 +3955,14 @@
int max_len;
struct dfs_info3_param *node = (*target_nodes)+i;
- node->flags = le16_to_cpu(pSMBr->DFSFlags);
+ node->flags = le32_to_cpu(pSMBr->DFSFlags);
if (is_unicode) {
__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
GFP_KERNEL);
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
- node->path_consumed = hostlen_fromUCS(tmp,
- le16_to_cpu(pSMBr->PathConsumed)/2,
+ node->path_consumed = cifs_ucs2_bytes(tmp,
+ le16_to_cpu(pSMBr->PathConsumed),
nls_codepage);
kfree(tmp);
} else
@@ -4029,20 +3974,24 @@
/* copy DfsPath */
temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->path_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
+ node->path_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (IS_ERR(node->path_name)) {
+ rc = PTR_ERR(node->path_name);
+ node->path_name = NULL;
goto parse_DFS_referrals_exit;
+ }
/* copy link target UNC */
temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->node_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
+ node->node_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (IS_ERR(node->node_name)) {
+ rc = PTR_ERR(node->node_name);
+ node->node_name = NULL;
goto parse_DFS_referrals_exit;
-
- ref += le16_to_cpu(ref->Size);
+ }
}
parse_DFS_referrals_exit:
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index bacdef1..4aa81a5 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/connect.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -32,6 +32,7 @@
#include <linux/kthread.h>
#include <linux/pagevec.h>
#include <linux/freezer.h>
+#include <linux/namei.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <net/ipv6.h>
@@ -978,6 +979,13 @@
return 1;
} else if (strnicmp(value, "krb5", 4) == 0) {
vol->secFlg |= CIFSSEC_MAY_KRB5;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ } else if (strnicmp(value, "ntlmsspi", 8) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP |
+ CIFSSEC_MUST_SIGN;
+ } else if (strnicmp(value, "ntlmssp", 7) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP;
+#endif
} else if (strnicmp(value, "ntlmv2i", 7) == 0) {
vol->secFlg |= CIFSSEC_MAY_NTLMV2 |
CIFSSEC_MUST_SIGN;
@@ -2278,6 +2286,7 @@
#ifdef CONFIG_CIFS_DFS_UPCALL
struct dfs_info3_param *referrals = NULL;
unsigned int num_referrals = 0;
+ int referral_walks_count = 0;
try_mount_again:
#endif
full_path = NULL;
@@ -2525,6 +2534,16 @@
/* get referral if needed */
if (rc == -EREMOTE) {
#ifdef CONFIG_CIFS_DFS_UPCALL
+ if (referral_walks_count > MAX_NESTED_LINKS) {
+ /*
+ * BB: when we implement proper loop detection,
+ * we will remove this check. But now we need it
+ * to prevent an indefinite loop if 'DFS tree' is
+ * misconfigured (i.e. has loops).
+ */
+ rc = -ELOOP;
+ goto mount_fail_check;
+ }
/* convert forward to back slashes in prepath here if needed */
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
convert_delimiter(cifs_sb->prepath,
@@ -2558,6 +2577,7 @@
cleanup_volume_info(&volume_info);
FreeXid(xid);
kfree(full_path);
+ referral_walks_count++;
goto try_mount_again;
}
#else /* No DFS support, return error on mount */
@@ -2592,1041 +2612,6 @@
return rc;
}
-static int
-CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char session_key[CIFS_SESS_KEY_SIZE],
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- __u32 capabilities;
- __u16 count;
-
- cFYI(1, ("In sesssetup"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
-
- if (smb_buffer == NULL)
- return -ENOMEM;
-
- smb_buffer_response = smb_buffer;
- pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 13 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req_no_secext.AndXCommand = 0xFF;
- pSMB->req_no_secext.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req_no_secext.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode &
- (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_LARGE_WRITE_X | CAP_LARGE_READ_X;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
-
- pSMB->req_no_secext.CaseInsensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
-
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- bcc_ptr = pByteArea(smb_buffer);
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
-
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) { /* must be word aligned for Unicode */
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- if (user == NULL)
- bytes_returned = 0; /* skip null user */
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, user, 100,
- nls_codepage);
- /* convert number of 16 bit words to bytes */
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* trailing null */
- if (domain == NULL)
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr,
- "CIFS_LINUX_DOM", 32, nls_codepage);
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release,
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- } else {
- if (user != NULL) {
- strncpy(bcc_ptr, user, 200);
- bcc_ptr += strnlen(user, 200);
- }
- *bcc_ptr = 0;
- bcc_ptr++;
- if (domain == NULL) {
- strcpy(bcc_ptr, "CIFS_LINUX_DOM");
- bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
- } else {
- strncpy(bcc_ptr, domain, 64);
- bcc_ptr += strnlen(domain, 64);
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- }
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req_no_secext.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB mark SesInfo struct? */
- ses->Suid = smb_buffer_response->Uid; /* UID left in wire format
- (little endian) */
- cFYI(1, ("UID = %d ", ses->Suid));
- /* response can have either 3 or 4 word count - Samba sends 3 */
- bcc_ptr = pByteArea(smb_buffer_response);
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len < pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4)
- bcc_ptr += blob_len;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response) - 1) / 2;
- /* Unicode strings must be word
- aligned */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC(smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)bcc_ptr,
- remaining_words-1);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverNOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 + (2 * len)] = 0;
- if (strncmp(ses->serverNOS,
- "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string is not always null terminated
- (for e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2*(len+1),
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverDomain[2*len] = 0;
- ses->serverDomain[1+(2*len)] = 0;
- } else { /* else no more room so create
- dummy domain string */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* no room so create dummy domain
- and NOS string */
-
- /* if these kcallocs fail not much we
- can do, but better to not fail the
- sesssetup itself */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverOS, bcc_ptr, len);
-
- bcc_ptr += len;
- /* null terminate the string */
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverDomain, bcc_ptr,
- len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("Variable field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond "
- "end of SMB"));
- }
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-sesssetup_nomem: /* do not return an error on nomem for the info strings,
- since that could make reconnection harder, and
- reconnection might be needed to free memory */
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-
-static int
-CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
- struct cifsSesInfo *ses, bool *pNTLMv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(NEGOTIATE_MESSAGE);
- PNEGOTIATE_MESSAGE SecurityBlob;
- PCHALLENGE_MESSAGE SecurityBlob2;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSP sesssetup (negotiate)"));
- if (ses == NULL)
- return -EINVAL;
- domain = ses->domainName;
- *pNTLMv2_flag = false;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *) &pSMB->req.SecurityBlob;
- SecurityBlob = (PNEGOTIATE_MESSAGE) bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmNegotiate;
- negotiate_flags =
- NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
- NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM |
- NTLMSSP_NEGOTIATE_56 |
- /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-/* if (ntlmv2_support)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;*/
- /* setup pointers to domain name and workstation name */
- bcc_ptr += SecurityBlobLength;
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
-
- /* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
- along with username on auth request (ie the response to challenge) */
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
- }
-
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null terminate Linux version */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* empty domain field */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
-
- if (smb_buffer_response->Status.CifsError ==
- cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))
- rc = 0;
-
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); *//* done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login"));
- /* Do we want to set anything in SesInfo struct when guest login? */
-
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
-
- SecurityBlob2 = (PCHALLENGE_MESSAGE) bcc_ptr;
- if (SecurityBlob2->MessageType != NtLmChallenge) {
- cFYI(1, ("Unexpected NTLMSSP message type received %d",
- SecurityBlob2->MessageType));
- } else if (ses) {
- ses->Suid = smb_buffer_response->Uid; /* UID left in le format */
- cFYI(1, ("UID = %d", ses->Suid));
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
-
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr += blob_len;
- cFYI(1, ("Security Blob Length %d",
- blob_len));
- }
-
- cFYI(1, ("NTLMSSP Challenge rcvd"));
-
- memcpy(ses->server->cryptKey,
- SecurityBlob2->Challenge,
- CIFS_CRYPTO_KEY_SIZE);
- if (SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
- *pNTLMv2_flag = true;
-
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
- || (sign_CIFS_PDUs > 1))
- ses->server->secMode |=
- SECMODE_SIGN_REQUIRED;
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_SIGN)) && (sign_CIFS_PDUs))
- ses->server->secMode |=
- SECMODE_SIGN_ENABLED;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- /* Must word align unicode strings */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC
- (smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 +
- (2 * len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated
- (for e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->serverDomain[2*len]
- = 0;
- ses->serverDomain
- [1 + (2 * len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2,
- GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverOS,
- bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("field of length %d "
- "extends beyond end of smb",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond"
- " end of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
- }
- } else {
- cERROR(1, ("Invalid Word count %d:",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-static int
-CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char *ntlm_session_key, bool ntlmv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(AUTHENTICATE_MESSAGE);
- PAUTHENTICATE_MESSAGE SecurityBlob;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSPSessSetup (Authenticate)"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *)smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *)smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- pSMB->req.hdr.Uid = ses->Suid;
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *)&pSMB->req.SecurityBlob;
- SecurityBlob = (PAUTHENTICATE_MESSAGE)bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmAuthenticate;
- bcc_ptr += SecurityBlobLength;
- negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
- NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
- 0x80000000 | NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
- if (ntlmv2_flag)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;
-
-/* setup pointers to domain name and workstation name */
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
- SecurityBlob->SessionKey.Length = 0;
- SecurityBlob->SessionKey.MaximumLength = 0;
- SecurityBlob->SessionKey.Buffer = 0;
-
- SecurityBlob->LmChallengeResponse.Length = 0;
- SecurityBlob->LmChallengeResponse.MaximumLength = 0;
- SecurityBlob->LmChallengeResponse.Buffer = 0;
-
- SecurityBlob->NtChallengeResponse.Length =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.MaximumLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.Buffer =
- cpu_to_le32(SecurityBlobLength);
- SecurityBlobLength += CIFS_SESS_KEY_SIZE;
- bcc_ptr += CIFS_SESS_KEY_SIZE;
-
- if (ses->capabilities & CAP_UNICODE) {
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, user, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->UserName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
-
- /* SecurityBlob->WorkstationName.Length =
- cifs_strtoUCS((__le16 *) bcc_ptr, "AMACHINE",64, nls_codepage);
- SecurityBlob->WorkstationName.Length *= 2;
- SecurityBlob->WorkstationName.MaximumLength =
- cpu_to_le16(SecurityBlob->WorkstationName.Length);
- SecurityBlob->WorkstationName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += SecurityBlob->WorkstationName.Length;
- SecurityBlobLength += SecurityBlob->WorkstationName.Length;
- SecurityBlob->WorkstationName.Length =
- cpu_to_le16(SecurityBlob->WorkstationName.Length); */
-
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null term version string */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln;
- negotiate_flags |= NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
- strncpy(bcc_ptr, domain, 63);
- ln = strnlen(domain, 64);
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln;
- strncpy(bcc_ptr, user, 63);
- ln = strnlen(user, 64);
- SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
- /* BB fill in our workstation name if known BB */
-
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* null domain */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response) done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3) ||
- (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB Should we set anything
- in SesInfo struct ? */
-/* if (SecurityBlob2->MessageType != NtLm??) {
- cFYI("Unexpected message type on auth response is %d"));
- } */
-
- if (ses) {
- cFYI(1,
- ("Check challenge UID %d vs auth response UID %d",
- ses->Suid, smb_buffer_response->Uid));
- /* UID left in wire format */
- ses->Suid = smb_buffer_response->Uid;
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr +=
- blob_len;
- cFYI(1,
- ("Security Blob Length %d ",
- blob_len));
- }
-
- cFYI(1,
- ("NTLMSSP response to Authenticate "));
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- bcc_ptr++; /* Unicode strings must be word aligned */
- } else {
- remaining_words = BCC(smb_buffer_response) / 2;
- }
- len = UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1+(2*len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated (e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->
- serverDomain,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->
- serverDomain[2
- * len]
- = 0;
- ses->
- serverDomain[1
- +
- (2
- *
- len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2,GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) -
- (long) pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
- strncpy(ses->serverOS,bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate the string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverNOS,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1, ("field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob extends beyond end "
- "of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
- }
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-
int
CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
const char *tree, struct cifsTconInfo *tcon,
@@ -3638,7 +2623,7 @@
TCONX_RSP *pSMBr;
unsigned char *bcc_ptr;
int rc = 0;
- int length;
+ int length, bytes_left;
__u16 count;
if (ses == NULL)
@@ -3726,14 +2711,22 @@
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
CIFS_STD_OP);
- /* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
/* above now done in SendReceive */
if ((rc == 0) && (tcon != NULL)) {
+ bool is_unicode;
+
tcon->tidStatus = CifsGood;
tcon->need_reconnect = false;
tcon->tid = smb_buffer_response->Tid;
bcc_ptr = pByteArea(smb_buffer_response);
- length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
+ bytes_left = BCC(smb_buffer_response);
+ length = strnlen(bcc_ptr, bytes_left - 2);
+ if (smb_buffer->Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
+
+
/* skip service field (NB: this field is always ASCII) */
if (length == 3) {
if ((bcc_ptr[0] == 'I') && (bcc_ptr[1] == 'P') &&
@@ -3748,39 +2741,16 @@
}
}
bcc_ptr += length + 1;
+ bytes_left -= (length + 1);
strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- length = UniStrnlen((wchar_t *) bcc_ptr, 512);
- if ((bcc_ptr + (2 * length)) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc((4 * length) + 2, GFP_KERNEL);
- if (tcon->nativeFileSystem) {
- cifs_strfromUCS_le(
- tcon->nativeFileSystem,
- (__le16 *) bcc_ptr,
- length, nls_codepage);
- cFYI(1, ("nativeFileSystem=%s",
- tcon->nativeFileSystem));
- }
- }
- /* else do not bother copying these information fields*/
- } else {
- length = strnlen(bcc_ptr, 1024);
- if ((bcc_ptr + length) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc(length + 1, GFP_KERNEL);
- if (tcon->nativeFileSystem)
- strncpy(tcon->nativeFileSystem, bcc_ptr,
- length);
- }
- /* else do not bother copying these information fields*/
- }
+
+ /* mostly informational -- no need to fail on error here */
+ tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
+ bytes_left, is_unicode,
+ nls_codepage);
+
+ cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
+
if ((smb_buffer_response->WordCount == 3) ||
(smb_buffer_response->WordCount == 7))
/* field is in same location */
@@ -3819,8 +2789,6 @@
struct nls_table *nls_info)
{
int rc = 0;
- char ntlm_session_key[CIFS_SESS_KEY_SIZE];
- bool ntlmv2_flag = false;
int first_time = 0;
struct TCP_Server_Info *server = pSesInfo->server;
@@ -3852,83 +2820,19 @@
pSesInfo->capabilities = server->capabilities;
if (linuxExtEnabled == 0)
pSesInfo->capabilities &= (~CAP_UNIX);
- /* pSesInfo->sequence_number = 0;*/
+
cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
server->secMode, server->capabilities, server->timeAdj));
- if (experimEnabled < 2)
- rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
- else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == NTLMSSP)) {
- rc = -EOPNOTSUPP;
- } else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == RawNTLMSSP)) {
- cFYI(1, ("NTLMSSP sesssetup"));
- rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
- nls_info);
- if (!rc) {
- if (ntlmv2_flag) {
- char *v2_response;
- cFYI(1, ("more secure NTLM ver2 hash"));
- if (CalcNTLMv2_partial_mac_key(pSesInfo,
- nls_info)) {
- rc = -ENOMEM;
- goto ss_err_exit;
- } else
- v2_response = kmalloc(16 + 64 /* blob*/,
- GFP_KERNEL);
- if (v2_response) {
- CalcNTLMv2_response(pSesInfo,
- v2_response);
- /* if (first_time)
- cifs_calculate_ntlmv2_mac_key */
- kfree(v2_response);
- /* BB Put dummy sig in SessSetup PDU? */
- } else {
- rc = -ENOMEM;
- goto ss_err_exit;
- }
-
- } else {
- SMBNTencrypt(pSesInfo->password,
- server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(
- &server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
- }
- /* for better security the weaker lanman hash not sent
- in AuthSessSetup so we no longer calculate it */
-
- rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
- ntlm_session_key,
- ntlmv2_flag,
- nls_info);
- }
- } else { /* old style NTLM 0.12 session setup */
- SMBNTencrypt(pSesInfo->password, server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(&server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
-
- rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
- }
+ rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
if (rc) {
cERROR(1, ("Send error in SessSetup = %d", rc));
} else {
cFYI(1, ("CIFS Session Established successfully"));
- spin_lock(&GlobalMid_Lock);
- pSesInfo->status = CifsGood;
- pSesInfo->need_reconnect = false;
- spin_unlock(&GlobalMid_Lock);
+ spin_lock(&GlobalMid_Lock);
+ pSesInfo->status = CifsGood;
+ pSesInfo->need_reconnect = false;
+ spin_unlock(&GlobalMid_Lock);
}
ss_err_exit:
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 461750e..11431ed 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -281,6 +281,7 @@
int create_options = CREATE_NOT_DIR;
int oplock = 0;
int oflags;
+ bool posix_create = false;
/*
* BB below access is probably too much for mknod to request
* but we have to do query and setpathinfo so requesting
@@ -328,11 +329,13 @@
negotation. EREMOTE indicates DFS junction, which is not
handled in posix open */
- if ((rc == 0) && (newinode == NULL))
- goto cifs_create_get_file_info; /* query inode info */
- else if (rc == 0) /* success, no need to query */
- goto cifs_create_set_dentry;
- else if ((rc != -EIO) && (rc != -EREMOTE) &&
+ if (rc == 0) {
+ posix_create = true;
+ if (newinode == NULL) /* query inode info */
+ goto cifs_create_get_file_info;
+ else /* success, no need to query */
+ goto cifs_create_set_dentry;
+ } else if ((rc != -EIO) && (rc != -EREMOTE) &&
(rc != -EOPNOTSUPP)) /* path not found or net err */
goto cifs_create_out;
/* else fallthrough to retry, using older open call, this is
@@ -464,7 +467,7 @@
if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
/* mknod case - do not leave file open */
CIFSSMBClose(xid, tcon, fileHandle);
- } else if (newinode) {
+ } else if (!(posix_create) && (newinode)) {
cifs_fill_fileinfo(newinode, fileHandle,
cifs_sb->tcon, write_only);
}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 50ca088..38c06f8 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -129,15 +129,12 @@
struct file *file, struct cifsInodeInfo *pCifsInode,
struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
{
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-/* struct timespec temp; */ /* BB REMOVEME BB */
file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
if (file->private_data == NULL)
return -ENOMEM;
pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
if (pCifsInode == NULL) {
@@ -145,17 +142,6 @@
return -EINVAL;
}
- /* want handles we can use to read with first
- in the list so we do not have to walk the
- list to search for one in write_begin */
- if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
-
if (pCifsInode->clientCanCacheRead) {
/* we have the inode open somewhere else
no need to discard cache data */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index f36b4e4..9c869a6 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -962,13 +962,21 @@
goto out_close;
}
+
+/*
+ * If dentry->d_inode is null (usually meaning the cached dentry
+ * is a negative dentry) then we would attempt a standard SMB delete, but
+ * if that fails we can not attempt the fall back mechanisms on EACESS
+ * but will return the EACESS to the caller. Note that the VFS does not call
+ * unlink on negative dentries currently.
+ */
int cifs_unlink(struct inode *dir, struct dentry *dentry)
{
int rc = 0;
int xid;
char *full_path = NULL;
struct inode *inode = dentry->d_inode;
- struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+ struct cifsInodeInfo *cifs_inode;
struct super_block *sb = dir->i_sb;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifsTconInfo *tcon = cifs_sb->tcon;
@@ -1012,7 +1020,7 @@
rc = cifs_rename_pending_delete(full_path, dentry, xid);
if (rc == 0)
drop_nlink(inode);
- } else if (rc == -EACCES && dosattr == 0) {
+ } else if ((rc == -EACCES) && (dosattr == 0) && inode) {
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (attrs == NULL) {
rc = -ENOMEM;
@@ -1020,7 +1028,8 @@
}
/* try to reset dos attributes */
- origattr = cifsInode->cifsAttrs;
+ cifs_inode = CIFS_I(inode);
+ origattr = cifs_inode->cifsAttrs;
if (origattr == 0)
origattr |= ATTR_NORMAL;
dosattr = origattr & ~ATTR_READONLY;
@@ -1041,13 +1050,13 @@
out_reval:
if (inode) {
- cifsInode = CIFS_I(inode);
- cifsInode->time = 0; /* will force revalidate to get info
+ cifs_inode = CIFS_I(inode);
+ cifs_inode->time = 0; /* will force revalidate to get info
when needed */
inode->i_ctime = current_fs_time(sb);
}
dir->i_ctime = dir->i_mtime = current_fs_time(sb);
- cifsInode = CIFS_I(dir);
+ cifs_inode = CIFS_I(dir);
CIFS_I(dir)->time = 0; /* force revalidate of dir as well */
kfree(full_path);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 63f6440..ea9d11e 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -119,16 +119,11 @@
full_path = build_path_from_dentry(direntry);
if (!full_path)
- goto out_no_free;
+ goto out;
cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
cifs_sb = CIFS_SB(inode->i_sb);
pTcon = cifs_sb->tcon;
- target_path = kmalloc(PATH_MAX, GFP_KERNEL);
- if (!target_path) {
- target_path = ERR_PTR(-ENOMEM);
- goto out;
- }
/* We could change this to:
if (pTcon->unix_ext)
@@ -138,8 +133,7 @@
if (pTcon->ses->capabilities & CAP_UNIX)
rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- target_path,
- PATH_MAX-1,
+ &target_path,
cifs_sb->local_nls);
else {
/* BB add read reparse point symlink code here */
@@ -148,22 +142,16 @@
/* BB Add MAC style xsymlink check here if enabled */
}
- if (rc == 0) {
-
-/* BB Add special case check for Samba DFS symlinks */
-
- target_path[PATH_MAX-1] = 0;
- } else {
+ if (rc != 0) {
kfree(target_path);
target_path = ERR_PTR(rc);
}
-out:
kfree(full_path);
-out_no_free:
+out:
FreeXid(xid);
nd_set_link(nd, target_path);
- return NULL; /* No cookie */
+ return NULL;
}
int
@@ -224,98 +212,6 @@
return rc;
}
-int
-cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
-{
- struct inode *inode = direntry->d_inode;
- int rc = -EACCES;
- int xid;
- int oplock = 0;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
- char *full_path = NULL;
- char *tmpbuffer;
- int len;
- __u16 fid;
-
- xid = GetXid();
- cifs_sb = CIFS_SB(inode->i_sb);
- pTcon = cifs_sb->tcon;
-
-/* BB would it be safe against deadlock to grab this sem
- even though rename itself grabs the sem and calls lookup? */
-/* mutex_lock(&inode->i_sb->s_vfs_rename_mutex);*/
- full_path = build_path_from_dentry(direntry);
-/* mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);*/
-
- if (full_path == NULL) {
- FreeXid(xid);
- return -ENOMEM;
- }
-
- cFYI(1,
- ("Full path: %s inode = 0x%p pBuffer = 0x%p buflen = %d",
- full_path, inode, pBuffer, buflen));
- if (buflen > PATH_MAX)
- len = PATH_MAX;
- else
- len = buflen;
- tmpbuffer = kmalloc(len, GFP_KERNEL);
- if (tmpbuffer == NULL) {
- kfree(full_path);
- FreeXid(xid);
- return -ENOMEM;
- }
-
-/* BB add read reparse point symlink code and
- Unix extensions symlink code here BB */
-/* We could disable this based on pTcon->unix_ext flag instead ... but why? */
- if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
- rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- cifs_sb->local_nls);
- else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- cERROR(1, ("SFU style symlinks not implemented yet"));
- /* add open and read as in fs/cifs/inode.c */
- } else {
- rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, GENERIC_READ,
- OPEN_REPARSE_POINT, &fid, &oplock, NULL,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (!rc) {
- rc = CIFSSMBQueryReparseLinkInfo(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- fid,
- cifs_sb->local_nls);
- if (CIFSSMBClose(xid, pTcon, fid)) {
- cFYI(1, ("Error closing junction point "
- "(open for ioctl)"));
- }
- /* If it is a DFS junction earlier we would have gotten
- PATH_NOT_COVERED returned from server so we do
- not need to request the DFS info here */
- }
- }
- /* BB Anything else to do to handle recursive links? */
- /* BB Should we be using page ops here? */
-
- /* BB null terminate returned string in pBuffer? BB */
- if (rc == 0) {
- rc = vfs_readlink(direntry, pBuffer, len, tmpbuffer);
- cFYI(1,
- ("vfs_readlink called from cifs_readlink returned %d",
- rc));
- }
-
- kfree(tmpbuffer);
- kfree(full_path);
- FreeXid(xid);
- return rc;
-}
-
void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *cookie)
{
char *p = nd_get_link(nd);
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 4c89c57..e079a91 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -635,77 +635,6 @@
return;
}
-/* Windows maps these to the user defined 16 bit Unicode range since they are
- reserved symbols (along with \ and /), otherwise illegal to store
- in filenames in NTFS */
-#define UNI_ASTERIK (__u16) ('*' + 0xF000)
-#define UNI_QUESTION (__u16) ('?' + 0xF000)
-#define UNI_COLON (__u16) (':' + 0xF000)
-#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
-#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
-#define UNI_PIPE (__u16) ('|' + 0xF000)
-#define UNI_SLASH (__u16) ('\\' + 0xF000)
-
-/* Convert 16 bit Unicode pathname from wire format to string in current code
- page. Conversion may involve remapping up the seven characters that are
- only legal in POSIX-like OS (if they are present in the string). Path
- names are little endian 16 bit Unicode on the wire */
-int
-cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *cp)
-{
- int i, j, len;
- __u16 src_char;
-
- for (i = 0, j = 0; i < maxlen; i++) {
- src_char = le16_to_cpu(source[i]);
- switch (src_char) {
- case 0:
- goto cUCS_out; /* BB check this BB */
- case UNI_COLON:
- target[j] = ':';
- break;
- case UNI_ASTERIK:
- target[j] = '*';
- break;
- case UNI_QUESTION:
- target[j] = '?';
- break;
- /* BB We can not handle remapping slash until
- all the calls to build_path_from_dentry
- are modified, as they use slash as separator BB */
- /* case UNI_SLASH:
- target[j] = '\\';
- break;*/
- case UNI_PIPE:
- target[j] = '|';
- break;
- case UNI_GRTRTHAN:
- target[j] = '>';
- break;
- case UNI_LESSTHAN:
- target[j] = '<';
- break;
- default:
- len = cp->uni2char(src_char, &target[j],
- NLS_MAX_CHARSET_SIZE);
- if (len > 0) {
- j += len;
- continue;
- } else {
- target[j] = '?';
- }
- }
- j++;
- /* make sure we do not overrun callers allocated temp buffer */
- if (j >= (2 * NAME_MAX))
- break;
- }
-cUCS_out:
- target[j] = 0;
- return j;
-}
-
/* Convert 16 bit Unicode pathname to wire format from string in current code
page. Conversion may involve remapping up the seven characters that are
only legal in POSIX-like OS (if they are present in the string). Path
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8703d68..e2fe998 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -79,6 +79,7 @@
{ErrQuota, -EDQUOT},
{ErrNotALink, -ENOLINK},
{ERRnetlogonNotStarted, -ENOPROTOOPT},
+ {ERRsymlink, -EOPNOTSUPP},
{ErrTooManyLinks, -EMLINK},
{0, 0}
};
@@ -714,6 +715,7 @@
ERRDOS, ERRnoaccess, 0xc000028f}, {
ERRDOS, ERRnoaccess, 0xc0000290}, {
ERRDOS, ERRbadfunc, 0xc000029c}, {
+ ERRDOS, ERRsymlink, NT_STATUS_STOPPED_ON_SYMLINK}, {
ERRDOS, ERRinvlevel, 0x007c0001}, };
/*****************************************************************************
diff --git a/fs/cifs/nterr.h b/fs/cifs/nterr.h
index 588abbb..25726736 100644
--- a/fs/cifs/nterr.h
+++ b/fs/cifs/nterr.h
@@ -35,8 +35,6 @@
extern const struct nt_err_code_struct nt_errs[];
/* Win32 Status codes. */
-
-#define STATUS_BUFFER_OVERFLOW 0x80000005
#define STATUS_MORE_ENTRIES 0x0105
#define ERROR_INVALID_PARAMETER 0x0057
#define ERROR_INSUFFICIENT_BUFFER 0x007a
@@ -50,6 +48,13 @@
#define STATUS_SOME_UNMAPPED 0x0107
#define STATUS_BUFFER_OVERFLOW 0x80000005
#define NT_STATUS_NO_MORE_ENTRIES 0x8000001a
+#define NT_STATUS_MEDIA_CHANGED 0x8000001c
+#define NT_STATUS_END_OF_MEDIA 0x8000001e
+#define NT_STATUS_MEDIA_CHECK 0x80000020
+#define NT_STATUS_NO_DATA_DETECTED 0x8000001c
+#define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
+#define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
+#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000288
#define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
#define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
#define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index c377d80..49c9a4e 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -27,29 +27,39 @@
#define UnknownMessage cpu_to_le32(8)
/* Negotiate Flags */
-#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are in unicode */
-#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
-#define NTLMSSP_REQUEST_TARGET 0x04 /* Server return its auth realm */
-#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signature capability */
-#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
-#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
-#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Sign/seal use LM session key */
-#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
-#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000
+#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are unicode */
+#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
+#define NTLMSSP_REQUEST_TARGET 0x04 /* Srv returns its auth realm */
+/* define reserved9 0x08 */
+#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signing capability */
+#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
+#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
+#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Use LM session key */
+/* defined reserved 8 0x0100 */
+#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
+#define NTLMSSP_NEGOTIATE_NT_ONLY 0x0400 /* Lanman not allowed */
+#define NTLMSSP_ANONYMOUS 0x0800
+#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000 /* reserved6 */
#define NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED 0x2000
-#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server on same machine */
-#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign for all security levels */
-#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
-#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
-#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
-#define NTLMSSP_NEGOTIATE_NTLMV2 0x80000
-#define NTLMSSP_REQUEST_INIT_RESP 0x100000
-#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000
-#define NTLMSSP_REQUEST_NOT_NT_KEY 0x400000
+#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server same machine */
+#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign. All security levels */
+#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
+#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
+#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
+#define NTLMSSP_NEGOTIATE_EXTENDED_SEC 0x80000 /* NB:not related to NTLMv2 pwd*/
+/* #define NTLMSSP_REQUEST_INIT_RESP 0x100000 */
+#define NTLMSSP_NEGOTIATE_IDENTIFY 0x100000
+#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000 /* reserved5 */
+#define NTLMSSP_REQUEST_NON_NT_KEY 0x400000
#define NTLMSSP_NEGOTIATE_TARGET_INFO 0x800000
-#define NTLMSSP_NEGOTIATE_128 0x20000000
-#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
-#define NTLMSSP_NEGOTIATE_56 0x80000000
+/* #define reserved4 0x1000000 */
+#define NTLMSSP_NEGOTIATE_VERSION 0x2000000 /* we do not set */
+/* #define reserved3 0x4000000 */
+/* #define reserved2 0x8000000 */
+/* #define reserved1 0x10000000 */
+#define NTLMSSP_NEGOTIATE_128 0x20000000
+#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
+#define NTLMSSP_NEGOTIATE_56 0x80000000
/* Although typedefs are not commonly used for structure definitions */
/* in the Linux kernel, in this particular case they are useful */
@@ -60,32 +70,36 @@
typedef struct _SECURITY_BUFFER {
__le16 Length;
__le16 MaximumLength;
- __le32 Buffer; /* offset to buffer */
+ __le32 BufferOffset; /* offset to buffer */
} __attribute__((packed)) SECURITY_BUFFER;
typedef struct _NEGOTIATE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 1 */
+ __le32 MessageType; /* NtLmNegotiate = 1 */
__le32 NegotiateFlags;
SECURITY_BUFFER DomainName; /* RFC 1001 style and ASCII */
SECURITY_BUFFER WorkstationName; /* RFC 1001 and ASCII */
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char DomainString[0];
/* followed by WorkstationString */
} __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
typedef struct _CHALLENGE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 2 */
+ __le32 MessageType; /* NtLmChallenge = 2 */
SECURITY_BUFFER TargetName;
__le32 NegotiateFlags;
__u8 Challenge[CIFS_CRYPTO_KEY_SIZE];
__u8 Reserved[8];
SECURITY_BUFFER TargetInfoArray;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
} __attribute__((packed)) CHALLENGE_MESSAGE, *PCHALLENGE_MESSAGE;
typedef struct _AUTHENTICATE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 3 */
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
+ __le32 MessageType; /* NtLmsAuthenticate = 3 */
SECURITY_BUFFER LmChallengeResponse;
SECURITY_BUFFER NtChallengeResponse;
SECURITY_BUFFER DomainName;
@@ -93,5 +107,7 @@
SECURITY_BUFFER WorkstationName;
SECURITY_BUFFER SessionKey;
__le32 NegotiateFlags;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char UserString[0];
} __attribute__((packed)) AUTHENTICATE_MESSAGE, *PAUTHENTICATE_MESSAGE;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 1a8be62..964e097 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -31,6 +31,13 @@
#include "cifs_fs_sb.h"
#include "cifsfs.h"
+/*
+ * To be safe - for UCS to UTF-8 with strings loaded with the rare long
+ * characters alloc more to account for such multibyte target UTF-8
+ * characters.
+ */
+#define UNICODE_NAME_MAX ((4 * NAME_MAX) + 2)
+
#ifdef CONFIG_CIFS_DEBUG2
static void dump_cifs_file_struct(struct file *file, char *label)
{
@@ -438,6 +445,38 @@
}
}
+/* BB eventually need to add the following helper function to
+ resolve NT_STATUS_STOPPED_ON_SYMLINK return code when
+ we try to do FindFirst on (NTFS) directory symlinks */
+/*
+int get_symlink_reparse_path(char *full_path, struct cifs_sb_info *cifs_sb,
+ int xid)
+{
+ __u16 fid;
+ int len;
+ int oplock = 0;
+ int rc;
+ struct cifsTconInfo *ptcon = cifs_sb->tcon;
+ char *tmpbuffer;
+
+ rc = CIFSSMBOpen(xid, ptcon, full_path, FILE_OPEN, GENERIC_READ,
+ OPEN_REPARSE_POINT, &fid, &oplock, NULL,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!rc) {
+ tmpbuffer = kmalloc(maxpath);
+ rc = CIFSSMBQueryReparseLinkInfo(xid, ptcon, full_path,
+ tmpbuffer,
+ maxpath -1,
+ fid,
+ cifs_sb->local_nls);
+ if (CIFSSMBClose(xid, ptcon, fid)) {
+ cFYI(1, ("Error closing temporary reparsepoint open)"));
+ }
+ }
+}
+ */
+
static int initiate_cifs_search(const int xid, struct file *file)
{
int rc = 0;
@@ -493,7 +532,10 @@
CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
if (rc == 0)
cifsFile->invalidHandle = false;
- if ((rc == -EOPNOTSUPP) &&
+ /* BB add following call to handle readdir on new NTFS symlink errors
+ else if STATUS_STOPPED_ON_SYMLINK
+ call get_symlink_reparse_path and retry with new path */
+ else if ((rc == -EOPNOTSUPP) &&
(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
goto ffirst_retry;
@@ -822,7 +864,7 @@
/* inode num, inode type and filename returned */
static int cifs_get_name_from_search_buf(struct qstr *pqst,
char *current_entry, __u16 level, unsigned int unicode,
- struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
+ struct cifs_sb_info *cifs_sb, unsigned int max_len, __u64 *pinum)
{
int rc = 0;
unsigned int len = 0;
@@ -881,14 +923,12 @@
}
if (unicode) {
- /* BB fixme - test with long names */
- /* Note converted filename can be longer than in unicode */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
- pqst->len = cifs_convertUCSpath((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
- else
- pqst->len = cifs_strfromUCS_le((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
+ pqst->len = cifs_from_ucs2((char *) pqst->name,
+ (__le16 *) filename,
+ UNICODE_NAME_MAX,
+ min(len, max_len), nlt,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
pqst->name = filename;
pqst->len = len;
@@ -898,8 +938,8 @@
return rc;
}
-static int cifs_filldir(char *pfindEntry, struct file *file,
- filldir_t filldir, void *direntry, char *scratch_buf, int max_len)
+static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
+ void *direntry, char *scratch_buf, unsigned int max_len)
{
int rc = 0;
struct qstr qstring;
@@ -996,7 +1036,7 @@
int num_to_fill = 0;
char *tmp_buf = NULL;
char *end_of_smb;
- int max_len;
+ unsigned int max_len;
xid = GetXid();
@@ -1070,11 +1110,7 @@
cifsFile->srch_inf.ntwrk_buf_start);
end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
- /* To be safe - for UCS to UTF-8 with strings loaded
- with the rare long characters alloc more to account for
- such multibyte target UTF-8 characters. cifs_unicode.c,
- which actually does the conversion, has the same limit */
- tmp_buf = kmalloc((2 * NAME_MAX) + 4, GFP_KERNEL);
+ tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
if (current_entry == NULL) {
/* evaluate whether this case is an error */
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index c652c73..897a052 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -3,7 +3,7 @@
*
* SMB/CIFS session setup handling routines
*
- * Copyright (c) International Business Machines Corp., 2006, 2007
+ * Copyright (c) International Business Machines Corp., 2006, 2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -111,7 +111,7 @@
get_vc_num_exit:
write_unlock(&cifs_tcp_ses_lock);
- return le16_to_cpu(vcnum);
+ return cpu_to_le16(vcnum);
}
static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
@@ -277,12 +277,11 @@
*pbcc_area = bcc_ptr;
}
-static int decode_unicode_ssetup(char **pbcc_area, int bleft,
- struct cifsSesInfo *ses,
- const struct nls_table *nls_cp)
+static void
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp)
{
- int rc = 0;
- int words_left, len;
+ int len;
char *data = *pbcc_area;
cFYI(1, ("bleft %d", bleft));
@@ -300,63 +299,29 @@
++bleft;
}
- words_left = bleft / 2;
-
- /* save off server operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len >= words_left)
- return rc;
-
kfree(ses->serverOS);
- /* UTF-8 string will not grow more than four times as big as UCS-16 */
- ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverOS != NULL) {
- cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
- cFYI(1, ("serverOS=%s", ses->serverOS));
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server network operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len >= words_left)
- return rc;
+ ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverOS=%s", ses->serverOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverNOS);
- ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverNOS != NULL) {
- cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
- nls_cp);
- cFYI(1, ("serverNOS=%s", ses->serverNOS));
- if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server domain */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len > words_left)
- return rc;
+ ses->serverNOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverNOS=%s", ses->serverNOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverDomain);
- ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
- if (ses->serverDomain != NULL) {
- cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
- nls_cp);
- cFYI(1, ("serverDomain=%s", ses->serverDomain));
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
+ ses->serverDomain = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverDomain=%s", ses->serverDomain));
- cFYI(1, ("words left: %d", words_left));
-
- return rc;
+ return;
}
static int decode_ascii_ssetup(char **pbcc_area, int bleft,
@@ -413,6 +378,186 @@
return rc;
}
+static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
+ struct cifsSesInfo *ses)
+{
+ CHALLENGE_MESSAGE *pblob = (CHALLENGE_MESSAGE *)bcc_ptr;
+
+ if (blob_len < sizeof(CHALLENGE_MESSAGE)) {
+ cERROR(1, ("challenge blob len %d too small", blob_len));
+ return -EINVAL;
+ }
+
+ if (memcmp(pblob->Signature, "NTLMSSP", 8)) {
+ cERROR(1, ("blob signature incorrect %s", pblob->Signature));
+ return -EINVAL;
+ }
+ if (pblob->MessageType != NtLmChallenge) {
+ cERROR(1, ("Incorrect message type %d", pblob->MessageType));
+ return -EINVAL;
+ }
+
+ memcpy(ses->server->cryptKey, pblob->Challenge, CIFS_CRYPTO_KEY_SIZE);
+ /* BB we could decode pblob->NegotiateFlags; some may be useful */
+ /* In particular we can examine sign flags */
+ /* BB spec says that if AvId field of MsvAvTimestamp is populated then
+ we must set the MIC field of the AUTHENTICATE_MESSAGE */
+
+ return 0;
+}
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+/* BB Move to ntlmssp.c eventually */
+
+/* We do not malloc the blob, it is passed in pbuffer, because
+ it is fixed size, and small, making this approach cleaner */
+static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses)
+{
+ NEGOTIATE_MESSAGE *sec_blob = (NEGOTIATE_MESSAGE *)pbuffer;
+ __u32 flags;
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmNegotiate;
+
+ /* BB is NTLMV2 session security format easier to use here? */
+ flags = NTLMSSP_NEGOTIATE_56 | NTLMSSP_REQUEST_TARGET |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->WorkstationName.BufferOffset = 0;
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+
+ /* Domain name is sent on the Challenge not Negotiate NTLMSSP request */
+ sec_blob->DomainName.BufferOffset = 0;
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+}
+
+/* We do not malloc the blob, it is passed in pbuffer, because its
+ maximum possible size is fixed and small, making this approach cleaner.
+ This function returns the length of the data in the blob */
+static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp, int first)
+{
+ AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer;
+ __u32 flags;
+ unsigned char *tmp;
+ char ntlm_session_key[CIFS_SESS_KEY_SIZE];
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmAuthenticate;
+
+ flags = NTLMSSP_NEGOTIATE_56 |
+ NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->LmChallengeResponse.BufferOffset =
+ cpu_to_le32(sizeof(AUTHENTICATE_MESSAGE));
+ sec_blob->LmChallengeResponse.Length = 0;
+ sec_blob->LmChallengeResponse.MaximumLength = 0;
+
+ /* calculate session key, BB what about adding similar ntlmv2 path? */
+ SMBNTencrypt(ses->password, ses->server->cryptKey, ntlm_session_key);
+ if (first)
+ cifs_calculate_mac_key(&ses->server->mac_signing_key,
+ ntlm_session_key, ses->password);
+
+ memcpy(tmp, ntlm_session_key, CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->NtChallengeResponse.Length = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.MaximumLength =
+ cpu_to_le16(CIFS_SESS_KEY_SIZE);
+
+ tmp += CIFS_SESS_KEY_SIZE;
+
+ if (ses->domainName == NULL) {
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = cpu_to_le16(len);
+ sec_blob->DomainName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ if (ses->userName == NULL) {
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = 0;
+ sec_blob->UserName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = cpu_to_le16(len);
+ sec_blob->UserName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+ tmp += 2;
+
+ sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->SessionKey.Length = 0;
+ sec_blob->SessionKey.MaximumLength = 0;
+ return tmp - pbuffer;
+}
+
+
+static void setup_ntlmssp_neg_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses)
+{
+ build_ntlmssp_negotiate_blob(&pSMB->req.SecurityBlob[0], ses);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(sizeof(NEGOTIATE_MESSAGE));
+
+ return;
+}
+
+static int setup_ntlmssp_auth_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls, int first_time)
+{
+ int bloblen;
+
+ bloblen = build_ntlmssp_auth_blob(&pSMB->req.SecurityBlob[0], ses, nls,
+ first_time);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(bloblen);
+
+ return bloblen;
+}
+#endif
+
int
CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
const struct nls_table *nls_cp)
@@ -431,6 +576,7 @@
__u16 action;
int bytes_remaining;
struct key *spnego_key = NULL;
+ __le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
if (ses == NULL)
return -EINVAL;
@@ -438,6 +584,10 @@
type = ses->server->secType;
cFYI(1, ("sess setup type %d", type));
+ssetup_ntlmssp_authenticate:
+ if (phase == NtLmChallenge)
+ phase = NtLmAuthenticate; /* if ntlmssp, now final phase */
+
if (type == LANMAN) {
#ifndef CONFIG_CIFS_WEAK_PW_HASH
/* LANMAN and plaintext are less secure and off by default.
@@ -651,9 +801,53 @@
goto ssetup_exit;
#endif /* CONFIG_CIFS_UPCALL */
} else {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+ if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
+ cERROR(1, ("NTLMSSP requires Unicode support"));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+
+ cFYI(1, ("ntlmssp session setup phase %d", phase));
+ pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ capabilities |= CAP_EXTENDED_SECURITY;
+ pSMB->req.Capabilities |= cpu_to_le32(capabilities);
+ if (phase == NtLmNegotiate) {
+ setup_ntlmssp_neg_req(pSMB, ses);
+ iov[1].iov_len = sizeof(NEGOTIATE_MESSAGE);
+ } else if (phase == NtLmAuthenticate) {
+ int blob_len;
+ blob_len = setup_ntlmssp_auth_req(pSMB, ses,
+ nls_cp,
+ first_time);
+ iov[1].iov_len = blob_len;
+ /* Make sure that we tell the server that we
+ are using the uid that it just gave us back
+ on the response (challenge) */
+ smb_buf->Uid = ses->Suid;
+ } else {
+ cERROR(1, ("invalid phase %d", phase));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+ iov[1].iov_base = &pSMB->req.SecurityBlob[0];
+ /* unicode strings must be word aligned */
+ if ((iov[0].iov_len + iov[1].iov_len) % 2) {
+ *bcc_ptr = 0;
+ bcc_ptr++;
+ }
+ unicode_oslm_strings(&bcc_ptr, nls_cp);
+ } else {
+ cERROR(1, ("secType %d not supported!", type));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+#else
cERROR(1, ("secType %d not supported!", type));
rc = -ENOSYS;
goto ssetup_exit;
+#endif
}
iov[2].iov_base = str_area;
@@ -669,12 +863,23 @@
/* SMB request buf freed in SendReceive2 */
cFYI(1, ("ssetup rc from sendrecv2 is %d", rc));
- if (rc)
- goto ssetup_exit;
pSMB = (SESSION_SETUP_ANDX *)iov[0].iov_base;
smb_buf = (struct smb_hdr *)iov[0].iov_base;
+ if ((type == RawNTLMSSP) && (smb_buf->Status.CifsError ==
+ cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))) {
+ if (phase != NtLmNegotiate) {
+ cERROR(1, ("Unexpected more processing error"));
+ goto ssetup_exit;
+ }
+ /* NTLMSSP Negotiate sent now processing challenge (response) */
+ phase = NtLmChallenge; /* process ntlmssp challenge */
+ rc = 0; /* MORE_PROC rc is not an error here, but expected */
+ }
+ if (rc)
+ goto ssetup_exit;
+
if ((smb_buf->WordCount != 3) && (smb_buf->WordCount != 4)) {
rc = -EIO;
cERROR(1, ("bad word count %d", smb_buf->WordCount));
@@ -693,12 +898,18 @@
if (smb_buf->WordCount == 4) {
__u16 blob_len;
blob_len = le16_to_cpu(pSMB->resp.SecurityBlobLength);
- bcc_ptr += blob_len;
if (blob_len > bytes_remaining) {
cERROR(1, ("bad security blob length %d", blob_len));
rc = -EINVAL;
goto ssetup_exit;
}
+ if (phase == NtLmChallenge) {
+ rc = decode_ntlmssp_challenge(bcc_ptr, blob_len, ses);
+ /* now goto beginning for ntlmssp authenticate phase */
+ if (rc)
+ goto ssetup_exit;
+ }
+ bcc_ptr += blob_len;
bytes_remaining -= blob_len;
}
@@ -709,8 +920,7 @@
++bcc_ptr;
--bytes_remaining;
}
- rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
- ses, nls_cp);
+ decode_unicode_ssetup(&bcc_ptr, bytes_remaining, ses, nls_cp);
} else {
rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
ses, nls_cp);
@@ -728,5 +938,9 @@
} else if (resp_buf_type == CIFS_LARGE_BUFFER)
cifs_buf_release(iov[0].iov_base);
+ /* if ntlmssp, and negotiate succeeded, proceed to authenticate phase */
+ if ((phase == NtLmChallenge) && (rc == 0))
+ goto ssetup_ntlmssp_authenticate;
+
return rc;
}
diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h
index 7f50e85..c5084d2 100644
--- a/fs/cifs/smberr.h
+++ b/fs/cifs/smberr.h
@@ -110,6 +110,7 @@
/* Below errors are used internally (do not come over the wire) for passthrough
from STATUS codes to POSIX only */
+#define ERRsymlink 0xFFFD
#define ErrTooManyLinks 0xFFFE
/* Following error codes may be generated with the ERRSRV error class.*/
diff --git a/fs/ioctl.c b/fs/ioctl.c
index ac2d47e..82d9c42 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -258,7 +258,7 @@
long long length = 0, map_len = 0;
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
- int ret = 0;
+ int ret = 0, past_eof = 0, whole_file = 0;
if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
return ret;
@@ -266,6 +266,9 @@
start_blk = logical_to_blk(inode, start);
length = (long long)min_t(u64, len, i_size_read(inode));
+ if (length < len)
+ whole_file = 1;
+
map_len = length;
do {
@@ -282,11 +285,26 @@
/* HOLE */
if (!buffer_mapped(&tmp)) {
+ length -= blk_to_logical(inode, 1);
+ start_blk++;
+
+ /*
+ * we want to handle the case where there is an
+ * allocated block at the front of the file, and then
+ * nothing but holes up to the end of the file properly,
+ * to make sure that extent at the front gets properly
+ * marked with FIEMAP_EXTENT_LAST
+ */
+ if (!past_eof &&
+ blk_to_logical(inode, start_blk) >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
+
/*
* first hole after going past the EOF, this is our
* last extent
*/
- if (length <= 0) {
+ if (past_eof && size) {
flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST;
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
@@ -294,15 +312,37 @@
break;
}
- length -= blk_to_logical(inode, 1);
-
/* if we have holes up to/past EOF then we're done */
- if (length <= 0)
+ if (length <= 0 || past_eof)
break;
-
- start_blk++;
} else {
- if (length <= 0 && size) {
+ /*
+ * we have gone over the length of what we wanted to
+ * map, and it wasn't the entire file, so add the extent
+ * we got last time and exit.
+ *
+ * This is for the case where say we want to map all the
+ * way up to the second to the last block in a file, but
+ * the last block is a hole, making the second to last
+ * block FIEMAP_EXTENT_LAST. In this case we want to
+ * see if there is a hole after the second to last block
+ * so we can mark it properly. If we found data after
+ * we exceeded the length we were requesting, then we
+ * are good to go, just add the extent to the fieinfo
+ * and break
+ */
+ if (length <= 0 && !whole_file) {
+ ret = fiemap_fill_next_extent(fieinfo, logical,
+ phys, size,
+ flags);
+ break;
+ }
+
+ /*
+ * if size != 0 then we know we already have an extent
+ * to add, so add it.
+ */
+ if (size) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
@@ -319,19 +359,14 @@
start_blk += logical_to_blk(inode, size);
/*
- * if we are past the EOF we need to loop again to see
- * if there is a hole so we can mark this extent as the
- * last one, and if not keep mapping things until we
- * find a hole, or we run out of slots in the extent
- * array
+ * If we are past the EOF, then we need to make sure as
+ * soon as we find a hole that the last extent we found
+ * is marked with FIEMAP_EXTENT_LAST
*/
- if (length <= 0)
- continue;
-
- ret = fiemap_fill_next_extent(fieinfo, logical, phys,
- size, flags);
- if (ret)
- break;
+ if (!past_eof &&
+ logical+size >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
}
cond_resched();
} while (1);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index bed766e..1634319 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -220,7 +220,7 @@
rem = 0;
}
- kevent->name = kmalloc(len + rem, GFP_KERNEL);
+ kevent->name = kmalloc(len + rem, GFP_NOFS);
if (unlikely(!kevent->name)) {
kmem_cache_free(event_cachep, kevent);
return NULL;
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index e727fe0..4b67559 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -58,12 +58,13 @@
*/
#ifndef __WARN
#ifndef __ASSEMBLY__
-extern void warn_slowpath(const char *file, const int line,
+extern void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...) __attribute__((format(printf, 3, 4)));
+extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
#endif
-#define __WARN() warn_slowpath(__FILE__, __LINE__, NULL)
-#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg)
+#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
+#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#else
#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0)
#endif
diff --git a/include/linux/nls.h b/include/linux/nls.h
index 6a88220..52b1a76 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -58,6 +58,25 @@
return 0;
}
+/*
+ * nls_nullsize - return length of null character for codepage
+ * @codepage - codepage for which to return length of NULL terminator
+ *
+ * Since we can't guarantee that the null terminator will be a particular
+ * length, we have to check against the codepage. If there's a problem
+ * determining it, assume a single-byte NULL terminator.
+ */
+static inline int
+nls_nullsize(const struct nls_table *codepage)
+{
+ int charlen;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
+
+ return charlen > 0 ? charlen : 1;
+}
+
#define MODULE_ALIAS_NLS(name) MODULE_ALIAS("nls_" __stringify(name))
#endif /* _LINUX_NLS_H */
diff --git a/init/initramfs.c b/init/initramfs.c
index 9ee7b78..4c00edc 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -574,11 +574,10 @@
if (initrd_start) {
#ifdef CONFIG_BLK_DEV_RAM
int fd;
- printk(KERN_INFO "checking if image is initramfs...\n");
+ printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
if (!err) {
- printk(KERN_INFO "rootfs image is initramfs; unpacking...\n");
free_initrd();
return 0;
} else {
@@ -596,15 +595,11 @@
free_initrd();
}
#else
- printk(KERN_INFO "Unpacking initramfs...");
+ printk(KERN_INFO "Unpacking initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
- if (err) {
- printk(" failed!\n");
- printk(KERN_EMERG "%s\n", err);
- } else {
- printk(" done\n");
- }
+ if (err)
+ printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
free_initrd();
#endif
}
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index a6fe71f..713098e 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1028,7 +1028,7 @@
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
@@ -1067,7 +1067,7 @@
e = container_of(r, struct audit_entry, rule);
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index a5e74dd..c0fa54b 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -319,6 +319,22 @@
return NULL;
}
+/* Arm a kprobe with text_mutex */
+static void __kprobes arm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_arm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
+/* Disarm a kprobe with text_mutex */
+static void __kprobes disarm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_disarm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
/*
* Aggregate handlers for multiple kprobes support - these handlers
* take care of invoking the individual kprobe handlers on p->list
@@ -538,7 +554,7 @@
ap->flags &= ~KPROBE_FLAG_DISABLED;
if (!kprobes_all_disarmed)
/* Arm the breakpoint again. */
- arch_arm_kprobe(ap);
+ arm_kprobe(ap);
}
return 0;
}
@@ -789,11 +805,8 @@
* enabled and not gone - otherwise, the breakpoint would
* already have been removed. We save on flushing icache.
*/
- if (!kprobes_all_disarmed && !kprobe_disabled(old_p)) {
- mutex_lock(&text_mutex);
- arch_disarm_kprobe(p);
- mutex_unlock(&text_mutex);
- }
+ if (!kprobes_all_disarmed && !kprobe_disabled(old_p))
+ disarm_kprobe(p);
hlist_del_rcu(&old_p->hlist);
} else {
if (p->break_handler && !kprobe_gone(p))
@@ -810,7 +823,7 @@
if (!kprobe_disabled(old_p)) {
try_to_disable_aggr_kprobe(old_p);
if (!kprobes_all_disarmed && kprobe_disabled(old_p))
- arch_disarm_kprobe(old_p);
+ disarm_kprobe(old_p);
}
}
return 0;
@@ -1364,7 +1377,7 @@
try_to_disable_aggr_kprobe(p);
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_disarm_kprobe(p);
+ disarm_kprobe(p);
out:
mutex_unlock(&kprobe_mutex);
return ret;
@@ -1393,7 +1406,7 @@
}
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_arm_kprobe(p);
+ arm_kprobe(p);
p->flags &= ~KPROBE_FLAG_DISABLED;
if (p != kp)
diff --git a/kernel/panic.c b/kernel/panic.c
index 3dcaa16..874ecf1 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -340,7 +340,7 @@
}
#ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath(const char *file, int line, const char *fmt, ...)
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
{
va_list args;
char function[KSYM_SYMBOL_LEN];
@@ -356,7 +356,7 @@
if (board)
printk(KERN_WARNING "Hardware name: %s\n", board);
- if (fmt) {
+ if (*fmt) {
va_start(args, fmt);
vprintk(fmt, args);
va_end(args);
@@ -367,7 +367,14 @@
print_oops_end_marker();
add_taint(TAINT_WARN);
}
-EXPORT_SYMBOL(warn_slowpath);
+EXPORT_SYMBOL(warn_slowpath_fmt);
+
+void warn_slowpath_null(const char *file, int line)
+{
+ static const char *empty = "";
+ warn_slowpath_fmt(file, line, empty);
+}
+EXPORT_SYMBOL(warn_slowpath_null);
#endif
#ifdef CONFIG_CC_STACKPROTECTOR
diff --git a/mm/Kconfig b/mm/Kconfig
index 57971d2..c2b57d8 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -225,3 +225,31 @@
config MMU_NOTIFIER
bool
+
+config NOMMU_INITIAL_TRIM_EXCESS
+ int "Turn on mmap() excess space trimming before booting"
+ depends on !MMU
+ default 1
+ help
+ The NOMMU mmap() frequently needs to allocate large contiguous chunks
+ of memory on which to store mappings, but it can only ask the system
+ allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently
+ more than it requires. To deal with this, mmap() is able to trim off
+ the excess and return it to the allocator.
+
+ If trimming is enabled, the excess is trimmed off and returned to the
+ system allocator, which can cause extra fragmentation, particularly
+ if there are a lot of transient processes.
+
+ If trimming is disabled, the excess is kept, but not used, which for
+ long-term mappings means that the space is wasted.
+
+ Trimming can be dynamically controlled through a sysctl option
+ (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of
+ excess pages there must be before trimming should occur, or zero if
+ no trimming is to occur.
+
+ This option specifies the initial value of this option. The default
+ of 1 says that all excess pages should be trimmed.
+
+ See Documentation/nommu-mmap.txt for more information.
diff --git a/mm/nommu.c b/mm/nommu.c
index 809998a..b571ef7 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -66,7 +66,7 @@
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
-int sysctl_nr_trim_pages = 1; /* page trimming behaviour */
+int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
int heap_stack_gap = 0;
atomic_long_t mmap_pages_allocated;
@@ -515,8 +515,6 @@
validate_nommu_regions();
- BUG_ON(region->vm_start & ~PAGE_MASK);
-
parent = NULL;
p = &nommu_region_tree.rb_node;
while (*p) {
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 2f3166e..92bcf1d 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -514,34 +514,32 @@
*/
static void __out_of_memory(gfp_t gfp_mask, int order)
{
- if (sysctl_oom_kill_allocating_task) {
- oom_kill_process(current, gfp_mask, order, 0, NULL,
- "Out of memory (oom_kill_allocating_task)");
+ struct task_struct *p;
+ unsigned long points;
- } else {
- unsigned long points;
- struct task_struct *p;
-
-retry:
- /*
- * Rambo mode: Shoot down a process and hope it solves whatever
- * issues we may have.
- */
- p = select_bad_process(&points, NULL);
-
- if (PTR_ERR(p) == -1UL)
+ if (sysctl_oom_kill_allocating_task)
+ if (!oom_kill_process(current, gfp_mask, order, 0, NULL,
+ "Out of memory (oom_kill_allocating_task)"))
return;
+retry:
+ /*
+ * Rambo mode: Shoot down a process and hope it solves whatever
+ * issues we may have.
+ */
+ p = select_bad_process(&points, NULL);
- /* Found nothing?!?! Either we hang forever, or we panic. */
- if (!p) {
- read_unlock(&tasklist_lock);
- panic("Out of memory and no killable processes...\n");
- }
+ if (PTR_ERR(p) == -1UL)
+ return;
- if (oom_kill_process(p, gfp_mask, order, points, NULL,
- "Out of memory"))
- goto retry;
+ /* Found nothing?!?! Either we hang forever, or we panic. */
+ if (!p) {
+ read_unlock(&tasklist_lock);
+ panic("Out of memory and no killable processes...\n");
}
+
+ if (oom_kill_process(p, gfp_mask, order, points, NULL,
+ "Out of memory"))
+ goto retry;
}
/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e2f2699..fe753ec 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2681,6 +2681,7 @@
static int zone_batchsize(struct zone *zone)
{
+#ifdef CONFIG_MMU
int batch;
/*
@@ -2706,9 +2707,26 @@
* of pages of one half of the possible page colors
* and the other with pages of the other colors.
*/
- batch = (1 << (fls(batch + batch/2)-1)) - 1;
+ batch = rounddown_pow_of_two(batch + batch/2) - 1;
return batch;
+
+#else
+ /* The deferral and batching of frees should be suppressed under NOMMU
+ * conditions.
+ *
+ * The problem is that NOMMU needs to be able to allocate large chunks
+ * of contiguous memory as there's no hardware page translation to
+ * assemble apparent contiguous memory from discontiguous pages.
+ *
+ * Queueing large contiguous runs of pages for batching, however,
+ * causes the pages to actually be freed in smaller chunks. As there
+ * can be a significant delay between the individual batches being
+ * recycled, this leads to the once large chunks of space being
+ * fragmented and becoming unavailable for high-order allocations.
+ */
+ return 0;
+#endif
}
static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index fab1987..083716e 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -402,6 +402,7 @@
printk(KERN_WARNING
"vmap allocation for size %lu failed: "
"use vmalloc=<size> to increase size.\n", size);
+ kfree(va);
return ERR_PTR(-EBUSY);
}