| /* |
| * Copyright (C) 2004 ICT CAS |
| * Author: Li xiaoyu, ICT CAS |
| * lixy@ict.ac.cn |
| * |
| * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology |
| * Author: Fuxin Zhang, zhangfx@lemote.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| |
| #include <loongson.h> |
| |
| /* South bridge slot number is set by the pci probe process */ |
| static u8 sb_slot = 5; |
| |
| int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int irq = 0; |
| |
| if (slot == sb_slot) { |
| switch (PCI_FUNC(dev->devfn)) { |
| case 2: |
| irq = 10; |
| break; |
| case 3: |
| irq = 11; |
| break; |
| case 5: |
| irq = 9; |
| break; |
| } |
| } else { |
| irq = LOONGSON_IRQ_BASE + 25 + pin; |
| } |
| return irq; |
| |
| } |
| |
| /* Do platform specific device initialization at pci_enable_device() time */ |
| int pcibios_plat_dev_init(struct pci_dev *dev) |
| { |
| return 0; |
| } |
| |
| static void loongson2e_nec_fixup(struct pci_dev *pdev) |
| { |
| unsigned int val; |
| |
| /* Configures port 1, 2, 3, 4 to be validate*/ |
| pci_read_config_dword(pdev, 0xe0, &val); |
| pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4); |
| |
| /* System clock is 48-MHz Oscillator. */ |
| pci_write_config_dword(pdev, 0xe4, 1 << 5); |
| } |
| |
| static void loongson2e_686b_func0_fixup(struct pci_dev *pdev) |
| { |
| unsigned char c; |
| |
| sb_slot = PCI_SLOT(pdev->devfn); |
| |
| printk(KERN_INFO "via686b fix: ISA bridge\n"); |
| |
| /* Enable I/O Recovery time */ |
| pci_write_config_byte(pdev, 0x40, 0x08); |
| |
| /* Enable ISA refresh */ |
| pci_write_config_byte(pdev, 0x41, 0x01); |
| |
| /* disable ISA line buffer */ |
| pci_write_config_byte(pdev, 0x45, 0x00); |
| |
| /* Gate INTR, and flush line buffer */ |
| pci_write_config_byte(pdev, 0x46, 0xe0); |
| |
| /* Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */ |
| /* pci_write_config_byte(pdev, 0x47, 0x20); */ |
| |
| /* |
| * enable PCI Delay Transaction, Enable EISA ports 4D0/4D1. |
| * enable time-out timer |
| */ |
| pci_write_config_byte(pdev, 0x47, 0xe6); |
| |
| /* |
| * enable level trigger on pci irqs: 9,10,11,13 |
| * important! without this PCI interrupts won't work |
| */ |
| outb(0x2e, 0x4d1); |
| |
| /* 512 K PCI Decode */ |
| pci_write_config_byte(pdev, 0x48, 0x01); |
| |
| /* Wait for PGNT before grant to ISA Master/DMA */ |
| pci_write_config_byte(pdev, 0x4a, 0x84); |
| |
| /* |
| * Plug'n'Play |
| * |
| * Parallel DRQ 3, Floppy DRQ 2 (default) |
| */ |
| pci_write_config_byte(pdev, 0x50, 0x0e); |
| |
| /* |
| * IRQ Routing for Floppy and Parallel port |
| * |
| * IRQ 6 for floppy, IRQ 7 for parallel port |
| */ |
| pci_write_config_byte(pdev, 0x51, 0x76); |
| |
| /* IRQ Routing for serial ports (take IRQ 3 and 4) */ |
| pci_write_config_byte(pdev, 0x52, 0x34); |
| |
| /* All IRQ's level triggered. */ |
| pci_write_config_byte(pdev, 0x54, 0x00); |
| |
| /* route PIRQA-D irq */ |
| pci_write_config_byte(pdev, 0x55, 0x90); /* bit 7-4, PIRQA */ |
| pci_write_config_byte(pdev, 0x56, 0xba); /* bit 7-4, PIRQC; */ |
| /* 3-0, PIRQB */ |
| pci_write_config_byte(pdev, 0x57, 0xd0); /* bit 7-4, PIRQD */ |
| |
| /* enable function 5/6, audio/modem */ |
| pci_read_config_byte(pdev, 0x85, &c); |
| c &= ~(0x3 << 2); |
| pci_write_config_byte(pdev, 0x85, c); |
| |
| printk(KERN_INFO"via686b fix: ISA bridge done\n"); |
| } |
| |
| static void loongson2e_686b_func1_fixup(struct pci_dev *pdev) |
| { |
| printk(KERN_INFO"via686b fix: IDE\n"); |
| |
| /* Modify IDE controller setup */ |
| pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48); |
| pci_write_config_byte(pdev, PCI_COMMAND, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER); |
| pci_write_config_byte(pdev, 0x40, 0x0b); |
| /* legacy mode */ |
| pci_write_config_byte(pdev, 0x42, 0x09); |
| |
| #if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */ |
| /* disable read prefetch/write post buffers */ |
| pci_write_config_byte(pdev, 0x41, 0x02); |
| |
| /* use 3/4 as fifo thresh hold */ |
| pci_write_config_byte(pdev, 0x43, 0x0a); |
| pci_write_config_byte(pdev, 0x44, 0x00); |
| |
| pci_write_config_byte(pdev, 0x45, 0x00); |
| #else |
| pci_write_config_byte(pdev, 0x41, 0xc2); |
| pci_write_config_byte(pdev, 0x43, 0x35); |
| pci_write_config_byte(pdev, 0x44, 0x1c); |
| |
| pci_write_config_byte(pdev, 0x45, 0x10); |
| #endif |
| |
| printk(KERN_INFO"via686b fix: IDE done\n"); |
| } |
| |
| static void loongson2e_686b_func2_fixup(struct pci_dev *pdev) |
| { |
| /* irq routing */ |
| pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); |
| } |
| |
| static void loongson2e_686b_func3_fixup(struct pci_dev *pdev) |
| { |
| /* irq routing */ |
| pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); |
| } |
| |
| static void loongson2e_686b_func5_fixup(struct pci_dev *pdev) |
| { |
| unsigned int val; |
| unsigned char c; |
| |
| /* enable IO */ |
| pci_write_config_byte(pdev, PCI_COMMAND, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER); |
| pci_read_config_dword(pdev, 0x4, &val); |
| pci_write_config_dword(pdev, 0x4, val | 1); |
| |
| /* route ac97 IRQ */ |
| pci_write_config_byte(pdev, 0x3c, 9); |
| |
| pci_read_config_byte(pdev, 0x8, &c); |
| |
| /* link control: enable link & SGD PCM output */ |
| pci_write_config_byte(pdev, 0x41, 0xcc); |
| |
| /* disable game port, FM, midi, sb, enable write to reg2c-2f */ |
| pci_write_config_byte(pdev, 0x42, 0x20); |
| |
| /* we are using Avance logic codec */ |
| pci_write_config_word(pdev, 0x2c, 0x1005); |
| pci_write_config_word(pdev, 0x2e, 0x4710); |
| pci_read_config_dword(pdev, 0x2c, &val); |
| |
| pci_write_config_byte(pdev, 0x42, 0x0); |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, |
| loongson2e_686b_func0_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, |
| loongson2e_686b_func1_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, |
| loongson2e_686b_func2_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, |
| loongson2e_686b_func3_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, |
| loongson2e_686b_func5_fixup); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, |
| loongson2e_nec_fixup); |