| #ifndef _ASM_CRIS_IO_H |
| #define _ASM_CRIS_IO_H |
| |
| #include <asm/page.h> /* for __va, __pa */ |
| #include <arch/io.h> |
| #include <linux/kernel.h> |
| |
| struct cris_io_operations |
| { |
| u32 (*read_mem)(void *addr, int size); |
| void (*write_mem)(u32 val, int size, void *addr); |
| u32 (*read_io)(u32 port, void *addr, int size, int count); |
| void (*write_io)(u32 port, void *addr, int size, int count); |
| }; |
| |
| #ifdef CONFIG_PCI |
| extern struct cris_io_operations *cris_iops; |
| #else |
| #define cris_iops ((struct cris_io_operations*)NULL) |
| #endif |
| |
| /* |
| * Change virtual addresses to physical addresses and vv. |
| */ |
| |
| static inline unsigned long virt_to_phys(volatile void * address) |
| { |
| return __pa(address); |
| } |
| |
| static inline void * phys_to_virt(unsigned long address) |
| { |
| return __va(address); |
| } |
| |
| extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); |
| extern void __iomem * __ioremap_prot(unsigned long phys_addr, unsigned long size, pgprot_t prot); |
| |
| static inline void __iomem * ioremap (unsigned long offset, unsigned long size) |
| { |
| return __ioremap(offset, size, 0); |
| } |
| |
| extern void iounmap(volatile void * __iomem addr); |
| |
| extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size); |
| |
| /* |
| * IO bus memory addresses are also 1:1 with the physical address |
| */ |
| #define virt_to_bus virt_to_phys |
| #define bus_to_virt phys_to_virt |
| |
| /* |
| * readX/writeX() are used to access memory mapped devices. On some |
| * architectures the memory mapped IO stuff needs to be accessed |
| * differently. On the CRIS architecture, we just read/write the |
| * memory location directly. |
| */ |
| #ifdef CONFIG_PCI |
| #define PCI_SPACE(x) ((((unsigned)(x)) & 0x10000000) == 0x10000000) |
| #else |
| #define PCI_SPACE(x) 0 |
| #endif |
| static inline unsigned char readb(const volatile void __iomem *addr) |
| { |
| if (PCI_SPACE(addr) && cris_iops) |
| return cris_iops->read_mem((void*)addr, 1); |
| else |
| return *(volatile unsigned char __force *) addr; |
| } |
| static inline unsigned short readw(const volatile void __iomem *addr) |
| { |
| if (PCI_SPACE(addr) && cris_iops) |
| return cris_iops->read_mem((void*)addr, 2); |
| else |
| return *(volatile unsigned short __force *) addr; |
| } |
| static inline unsigned int readl(const volatile void __iomem *addr) |
| { |
| if (PCI_SPACE(addr) && cris_iops) |
| return cris_iops->read_mem((void*)addr, 4); |
| else |
| return *(volatile unsigned int __force *) addr; |
| } |
| #define readb_relaxed(addr) readb(addr) |
| #define readw_relaxed(addr) readw(addr) |
| #define readl_relaxed(addr) readl(addr) |
| #define __raw_readb readb |
| #define __raw_readw readw |
| #define __raw_readl readl |
| |
| static inline void writeb(unsigned char b, volatile void __iomem *addr) |
| { |
| if (PCI_SPACE(addr) && cris_iops) |
| cris_iops->write_mem(b, 1, (void*)addr); |
| else |
| *(volatile unsigned char __force *) addr = b; |
| } |
| static inline void writew(unsigned short b, volatile void __iomem *addr) |
| { |
| if (PCI_SPACE(addr) && cris_iops) |
| cris_iops->write_mem(b, 2, (void*)addr); |
| else |
| *(volatile unsigned short __force *) addr = b; |
| } |
| static inline void writel(unsigned int b, volatile void __iomem *addr) |
| { |
| if (PCI_SPACE(addr) && cris_iops) |
| cris_iops->write_mem(b, 4, (void*)addr); |
| else |
| *(volatile unsigned int __force *) addr = b; |
| } |
| #define __raw_writeb writeb |
| #define __raw_writew writew |
| #define __raw_writel writel |
| |
| #define mmiowb() |
| |
| #define memset_io(a,b,c) memset((void *)(a),(b),(c)) |
| #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) |
| #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) |
| |
| |
| /* I/O port access. Normally there is no I/O space on CRIS but when |
| * Cardbus/PCI is enabled the request is passed through the bridge. |
| */ |
| |
| #define IO_SPACE_LIMIT 0xffff |
| #define inb(port) (cris_iops ? cris_iops->read_io(port,NULL,1,1) : 0) |
| #define inw(port) (cris_iops ? cris_iops->read_io(port,NULL,2,1) : 0) |
| #define inl(port) (cris_iops ? cris_iops->read_io(port,NULL,4,1) : 0) |
| #define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0) |
| #define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0) |
| #define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0) |
| static inline void outb(unsigned char data, unsigned int port) |
| { |
| if (cris_iops) |
| cris_iops->write_io(port, (void *) &data, 1, 1); |
| } |
| static inline void outw(unsigned short data, unsigned int port) |
| { |
| if (cris_iops) |
| cris_iops->write_io(port, (void *) &data, 2, 1); |
| } |
| static inline void outl(unsigned int data, unsigned int port) |
| { |
| if (cris_iops) |
| cris_iops->write_io(port, (void *) &data, 4, 1); |
| } |
| static inline void outsb(unsigned int port, const void *addr, |
| unsigned long count) |
| { |
| if (cris_iops) |
| cris_iops->write_io(port, (void *)addr, 1, count); |
| } |
| static inline void outsw(unsigned int port, const void *addr, |
| unsigned long count) |
| { |
| if (cris_iops) |
| cris_iops->write_io(port, (void *)addr, 2, count); |
| } |
| static inline void outsl(unsigned int port, const void *addr, |
| unsigned long count) |
| { |
| if (cris_iops) |
| cris_iops->write_io(port, (void *)addr, 4, count); |
| } |
| |
| /* |
| * Convert a physical pointer to a virtual kernel pointer for /dev/mem |
| * access |
| */ |
| #define xlate_dev_mem_ptr(p) __va(p) |
| |
| /* |
| * Convert a virtual cached pointer to an uncached pointer |
| */ |
| #define xlate_dev_kmem_ptr(p) p |
| |
| #endif |