| /* |
| * Elonics E4000 silicon tuner driver |
| * |
| * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #include "e4000_priv.h" |
| #include <linux/math64.h> |
| |
| /* Max transfer size done by I2C transfer functions */ |
| #define MAX_XFER_SIZE 64 |
| |
| /* write multiple registers */ |
| static int e4000_wr_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len) |
| { |
| int ret; |
| u8 buf[MAX_XFER_SIZE]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = priv->cfg->i2c_addr, |
| .flags = 0, |
| .len = 1 + len, |
| .buf = buf, |
| } |
| }; |
| |
| if (1 + len > sizeof(buf)) { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c wr reg=%04x: len=%d is too big!\n", |
| KBUILD_MODNAME, reg, len); |
| return -EINVAL; |
| } |
| |
| buf[0] = reg; |
| memcpy(&buf[1], val, len); |
| |
| ret = i2c_transfer(priv->i2c, msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c wr failed=%d reg=%02x len=%d\n", |
| KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* read multiple registers */ |
| static int e4000_rd_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len) |
| { |
| int ret; |
| u8 buf[MAX_XFER_SIZE]; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = priv->cfg->i2c_addr, |
| .flags = 0, |
| .len = 1, |
| .buf = ®, |
| }, { |
| .addr = priv->cfg->i2c_addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = buf, |
| } |
| }; |
| |
| if (len > sizeof(buf)) { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c rd reg=%04x: len=%d is too big!\n", |
| KBUILD_MODNAME, reg, len); |
| return -EINVAL; |
| } |
| |
| ret = i2c_transfer(priv->i2c, msg, 2); |
| if (ret == 2) { |
| memcpy(val, buf, len); |
| ret = 0; |
| } else { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c rd failed=%d reg=%02x len=%d\n", |
| KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| |
| return ret; |
| } |
| |
| /* write single register */ |
| static int e4000_wr_reg(struct e4000_priv *priv, u8 reg, u8 val) |
| { |
| return e4000_wr_regs(priv, reg, &val, 1); |
| } |
| |
| /* read single register */ |
| static int e4000_rd_reg(struct e4000_priv *priv, u8 reg, u8 *val) |
| { |
| return e4000_rd_regs(priv, reg, val, 1); |
| } |
| |
| static int e4000_init(struct dvb_frontend *fe) |
| { |
| struct e4000_priv *priv = fe->tuner_priv; |
| int ret; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| /* dummy I2C to ensure I2C wakes up */ |
| ret = e4000_wr_reg(priv, 0x02, 0x40); |
| |
| /* reset */ |
| ret = e4000_wr_reg(priv, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| /* disable output clock */ |
| ret = e4000_wr_reg(priv, 0x06, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_reg(priv, 0x7a, 0x96); |
| if (ret < 0) |
| goto err; |
| |
| /* configure gains */ |
| ret = e4000_wr_regs(priv, 0x7e, "\x01\xfe", 2); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_reg(priv, 0x82, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_reg(priv, 0x24, 0x05); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_regs(priv, 0x87, "\x20\x01", 2); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_regs(priv, 0x9f, "\x7f\x07", 2); |
| if (ret < 0) |
| goto err; |
| |
| /* DC offset control */ |
| ret = e4000_wr_reg(priv, 0x2d, 0x1f); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_regs(priv, 0x70, "\x01\x01", 2); |
| if (ret < 0) |
| goto err; |
| |
| /* gain control */ |
| ret = e4000_wr_reg(priv, 0x1a, 0x17); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_reg(priv, 0x1f, 0x1a); |
| if (ret < 0) |
| goto err; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| return 0; |
| err: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int e4000_sleep(struct dvb_frontend *fe) |
| { |
| struct e4000_priv *priv = fe->tuner_priv; |
| int ret; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| ret = e4000_wr_reg(priv, 0x00, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| return 0; |
| err: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int e4000_set_params(struct dvb_frontend *fe) |
| { |
| struct e4000_priv *priv = fe->tuner_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, sigma_delta; |
| unsigned int f_vco; |
| u8 buf[5], i_data[4], q_data[4]; |
| |
| dev_dbg(&priv->i2c->dev, |
| "%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n", |
| __func__, c->delivery_system, c->frequency, |
| c->bandwidth_hz); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| /* gain control manual */ |
| ret = e4000_wr_reg(priv, 0x1a, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| /* PLL */ |
| for (i = 0; i < ARRAY_SIZE(e4000_pll_lut); i++) { |
| if (c->frequency <= e4000_pll_lut[i].freq) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(e4000_pll_lut)) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* |
| * Note: Currently f_vco overflows when c->frequency is 1 073 741 824 Hz |
| * or more. |
| */ |
| f_vco = c->frequency * e4000_pll_lut[i].mul; |
| sigma_delta = div_u64(0x10000ULL * (f_vco % priv->cfg->clock), priv->cfg->clock); |
| buf[0] = f_vco / priv->cfg->clock; |
| buf[1] = (sigma_delta >> 0) & 0xff; |
| buf[2] = (sigma_delta >> 8) & 0xff; |
| buf[3] = 0x00; |
| buf[4] = e4000_pll_lut[i].div; |
| |
| dev_dbg(&priv->i2c->dev, "%s: f_vco=%u pll div=%d sigma_delta=%04x\n", |
| __func__, f_vco, buf[0], sigma_delta); |
| |
| ret = e4000_wr_regs(priv, 0x09, buf, 5); |
| if (ret < 0) |
| goto err; |
| |
| /* LNA filter (RF filter) */ |
| for (i = 0; i < ARRAY_SIZE(e400_lna_filter_lut); i++) { |
| if (c->frequency <= e400_lna_filter_lut[i].freq) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(e400_lna_filter_lut)) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = e4000_wr_reg(priv, 0x10, e400_lna_filter_lut[i].val); |
| if (ret < 0) |
| goto err; |
| |
| /* IF filters */ |
| for (i = 0; i < ARRAY_SIZE(e4000_if_filter_lut); i++) { |
| if (c->bandwidth_hz <= e4000_if_filter_lut[i].freq) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(e4000_if_filter_lut)) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| buf[0] = e4000_if_filter_lut[i].reg11_val; |
| buf[1] = e4000_if_filter_lut[i].reg12_val; |
| |
| ret = e4000_wr_regs(priv, 0x11, buf, 2); |
| if (ret < 0) |
| goto err; |
| |
| /* frequency band */ |
| for (i = 0; i < ARRAY_SIZE(e4000_band_lut); i++) { |
| if (c->frequency <= e4000_band_lut[i].freq) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(e4000_band_lut)) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = e4000_wr_reg(priv, 0x07, e4000_band_lut[i].reg07_val); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_reg(priv, 0x78, e4000_band_lut[i].reg78_val); |
| if (ret < 0) |
| goto err; |
| |
| /* DC offset */ |
| for (i = 0; i < 4; i++) { |
| if (i == 0) |
| ret = e4000_wr_regs(priv, 0x15, "\x00\x7e\x24", 3); |
| else if (i == 1) |
| ret = e4000_wr_regs(priv, 0x15, "\x00\x7f", 2); |
| else if (i == 2) |
| ret = e4000_wr_regs(priv, 0x15, "\x01", 1); |
| else |
| ret = e4000_wr_regs(priv, 0x16, "\x7e", 1); |
| |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_reg(priv, 0x29, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_rd_regs(priv, 0x2a, buf, 3); |
| if (ret < 0) |
| goto err; |
| |
| i_data[i] = (((buf[2] >> 0) & 0x3) << 6) | (buf[0] & 0x3f); |
| q_data[i] = (((buf[2] >> 4) & 0x3) << 6) | (buf[1] & 0x3f); |
| } |
| |
| swap(q_data[2], q_data[3]); |
| swap(i_data[2], i_data[3]); |
| |
| ret = e4000_wr_regs(priv, 0x50, q_data, 4); |
| if (ret < 0) |
| goto err; |
| |
| ret = e4000_wr_regs(priv, 0x60, i_data, 4); |
| if (ret < 0) |
| goto err; |
| |
| /* gain control auto */ |
| ret = e4000_wr_reg(priv, 0x1a, 0x17); |
| if (ret < 0) |
| goto err; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| return 0; |
| err: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int e4000_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct e4000_priv *priv = fe->tuner_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| |
| *frequency = 0; /* Zero-IF */ |
| |
| return 0; |
| } |
| |
| static int e4000_release(struct dvb_frontend *fe) |
| { |
| struct e4000_priv *priv = fe->tuner_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s:\n", __func__); |
| |
| kfree(fe->tuner_priv); |
| |
| return 0; |
| } |
| |
| static const struct dvb_tuner_ops e4000_tuner_ops = { |
| .info = { |
| .name = "Elonics E4000", |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| }, |
| |
| .release = e4000_release, |
| |
| .init = e4000_init, |
| .sleep = e4000_sleep, |
| .set_params = e4000_set_params, |
| |
| .get_if_frequency = e4000_get_if_frequency, |
| }; |
| |
| struct dvb_frontend *e4000_attach(struct dvb_frontend *fe, |
| struct i2c_adapter *i2c, const struct e4000_config *cfg) |
| { |
| struct e4000_priv *priv; |
| int ret; |
| u8 chip_id; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| priv = kzalloc(sizeof(struct e4000_priv), GFP_KERNEL); |
| if (!priv) { |
| ret = -ENOMEM; |
| dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); |
| goto err; |
| } |
| |
| priv->cfg = cfg; |
| priv->i2c = i2c; |
| |
| /* check if the tuner is there */ |
| ret = e4000_rd_reg(priv, 0x02, &chip_id); |
| if (ret < 0) |
| goto err; |
| |
| dev_dbg(&priv->i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id); |
| |
| if (chip_id != 0x40) |
| goto err; |
| |
| /* put sleep as chip seems to be in normal mode by default */ |
| ret = e4000_wr_reg(priv, 0x00, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| dev_info(&priv->i2c->dev, |
| "%s: Elonics E4000 successfully identified\n", |
| KBUILD_MODNAME); |
| |
| fe->tuner_priv = priv; |
| memcpy(&fe->ops.tuner_ops, &e4000_tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| return fe; |
| err: |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret); |
| kfree(priv); |
| return NULL; |
| } |
| EXPORT_SYMBOL(e4000_attach); |
| |
| MODULE_DESCRIPTION("Elonics E4000 silicon tuner driver"); |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_LICENSE("GPL"); |