blob: 1e4340a182ef2d68bea70ec0eea6c3980d1ba417 [file] [log] [blame]
/*
Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2800usb
Abstract: Data structures and registers for the rt2800usb module.
Supported chipsets: RT2800U.
*/
#ifndef RT2800USB_H
#define RT2800USB_H
/*
* USB registers.
*/
/*
* USB_DMA_CFG
* RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
* RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
* PHY_CLEAR: phy watch dog enable.
* TX_CLEAR: Clear USB DMA TX path.
* TXOP_HALT: Halt TXOP count down when TX buffer is full.
* RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
* RX_BULK_EN: Enable USB DMA Rx.
* TX_BULK_EN: Enable USB DMA Tx.
* EP_OUT_VALID: OUT endpoint data valid.
* RX_BUSY: USB DMA RX FSM busy.
* TX_BUSY: USB DMA TX FSM busy.
*/
#define USB_DMA_CFG 0x02a0
#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00)
#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000)
#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000)
#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000)
#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000)
#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000)
#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000)
#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000)
#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000)
#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000)
/*
* USB_CYC_CFG
*/
#define USB_CYC_CFG 0x02a4
#define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff)
/*
* 8051 firmware image.
*/
#define FIRMWARE_RT2870 "rt2870.bin"
#define FIRMWARE_IMAGE_BASE 0x3000
/*
* DMA descriptor defines.
*/
#define TXINFO_DESC_SIZE ( 1 * sizeof(__le32) )
#define RXINFO_DESC_SIZE ( 1 * sizeof(__le32) )
/*
* TX Info structure
*/
/*
* Word0
* WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
* QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
* 0:MGMT, 1:HCCA 2:EDCA
* USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid
* DMA_TX_BURST: used ONLY in USB bulk Aggregation.
* Force USB DMA transmit frame from current selected endpoint
*/
#define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff)
#define TXINFO_W0_WIV FIELD32(0x01000000)
#define TXINFO_W0_QSEL FIELD32(0x06000000)
#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000)
#define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000)
#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000)
/*
* RX descriptor format for RX Ring.
*/
/*
* Word0
* UNICAST_TO_ME: This RX frame is unicast to me.
* MULTICAST: This is a multicast frame.
* BROADCAST: This is a broadcast frame.
* MY_BSS: this frame belongs to the same BSSID.
* CRC_ERROR: CRC error.
* CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid.
* AMSDU: rx with 802.3 header, not 802.11 header.
*/
#define RXINFO_W0_BA FIELD32(0x00000001)
#define RXINFO_W0_DATA FIELD32(0x00000002)
#define RXINFO_W0_NULLDATA FIELD32(0x00000004)
#define RXINFO_W0_FRAG FIELD32(0x00000008)
#define RXINFO_W0_UNICAST_TO_ME FIELD32(0x00000010)
#define RXINFO_W0_MULTICAST FIELD32(0x00000020)
#define RXINFO_W0_BROADCAST FIELD32(0x00000040)
#define RXINFO_W0_MY_BSS FIELD32(0x00000080)
#define RXINFO_W0_CRC_ERROR FIELD32(0x00000100)
#define RXINFO_W0_CIPHER_ERROR FIELD32(0x00000600)
#define RXINFO_W0_AMSDU FIELD32(0x00000800)
#define RXINFO_W0_HTC FIELD32(0x00001000)
#define RXINFO_W0_RSSI FIELD32(0x00002000)
#define RXINFO_W0_L2PAD FIELD32(0x00004000)
#define RXINFO_W0_AMPDU FIELD32(0x00008000)
#define RXINFO_W0_DECRYPTED FIELD32(0x00010000)
#define RXINFO_W0_PLCP_RSSI FIELD32(0x00020000)
#define RXINFO_W0_CIPHER_ALG FIELD32(0x00040000)
#define RXINFO_W0_LAST_AMSDU FIELD32(0x00080000)
#define RXINFO_W0_PLCP_SIGNAL FIELD32(0xfff00000)
#endif /* RT2800USB_H */