blob: 2a75e937ae8daa8797e53f92cfc9a138a76e62a2 [file] [log] [blame]
#
# Makefile for the linux kernel.
#
ifdef CONFIG_DYNAMIC_FTRACE
CFLAGS_REMOVE_ftrace.o = -pg
endif
extra-y := head.o init_task.o vmlinux.lds
obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
irq_lsapic.o ivt.o machvec.o pal.o paravirt_patchlist.o patch.o process.o perfmon.o ptrace.o sal.o \
salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
unwind.o mca.o mca_asm.o topology.o dma-mapping.o
obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o
obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o
obj-$(CONFIG_IA64_HP_ZX1) += acpi-ext.o
obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += acpi-processor.o
endif
obj-$(CONFIG_IA64_PALINFO) += palinfo.o
obj-$(CONFIG_IOSAPIC) += iosapic.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o
obj-$(CONFIG_IA64_CYCLONE) += cyclone.o
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o
obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o
obj-$(CONFIG_AUDIT) += audit.o
obj-$(CONFIG_PCI_MSI) += msi_ia64.o
mca_recovery-y += mca_drv.o mca_drv_asm.o
obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirtentry.o \
paravirt_patch.o
obj-$(CONFIG_IA64_ESI) += esi.o
ifneq ($(CONFIG_IA64_ESI),)
obj-y += esi_stub.o # must be in kernel proper
endif
obj-$(CONFIG_DMAR) += pci-dma.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o
# fp_emulate() expects f2-f5,f16-f31 to contain the user-level state.
CFLAGS_traps.o += -mfixed-range=f2-f5,f16-f31
# The gate DSO image is built using a special linker script.
include $(srctree)/arch/ia64/kernel/Makefile.gate
# tell compiled for native
CPPFLAGS_gate.lds += -D__IA64_GATE_PARAVIRTUALIZED_NATIVE
# Calculate NR_IRQ = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, ...) based on config
define sed-y
"/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"
endef
quiet_cmd_nr_irqs = GEN $@
define cmd_nr_irqs
(set -e; \
echo "#ifndef __ASM_NR_IRQS_H__"; \
echo "#define __ASM_NR_IRQS_H__"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " *"; \
echo " */"; \
echo ""; \
sed -ne $(sed-y) $<; \
echo ""; \
echo "#endif" ) > $@
endef
# We use internal kbuild rules to avoid the "is up to date" message from make
arch/$(SRCARCH)/kernel/nr-irqs.s: arch/$(SRCARCH)/kernel/nr-irqs.c
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
include/generated/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s
$(Q)mkdir -p $(dir $@)
$(call cmd,nr_irqs)
#
# native ivt.S, entry.S and fsys.S
#
ASM_PARAVIRT_OBJS = ivt.o entry.o fsys.o
define paravirtualized_native
AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE
AFLAGS_pvchk-sed-$(1) += -D__IA64_ASM_PARAVIRTUALIZED_PVCHECK
extra-y += pvchk-$(1)
endef
$(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj))))
#
# Checker for paravirtualizations of privileged operations.
#
quiet_cmd_pv_check_sed = PVCHK $@
define cmd_pv_check_sed
sed -f $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed $< > $@
endef
$(obj)/pvchk-sed-%.s: $(src)/%.S $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed FORCE
$(call if_changed_dep,as_s_S)
$(obj)/pvchk-%.s: $(obj)/pvchk-sed-%.s FORCE
$(call if_changed,pv_check_sed)
$(obj)/pvchk-%.o: $(obj)/pvchk-%.s FORCE
$(call if_changed,as_o_S)
.PRECIOUS: $(obj)/pvchk-sed-%.s $(obj)/pvchk-%.s $(obj)/pvchk-%.o