| /* |
| * sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be |
| * found on some Ricoh RL5c476 II cardbus bridge |
| * |
| * Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| /* |
| #define DEBUG |
| #define VERBOSE_DEBUG |
| */ |
| #include <linux/delay.h> |
| #include <linux/highmem.h> |
| #include <linux/pci.h> |
| #include <linux/ioport.h> |
| #include <linux/scatterlist.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| #include <linux/io.h> |
| |
| #include <linux/mmc/host.h> |
| |
| #define DRIVER_NAME "sdricoh_cs" |
| |
| static unsigned int switchlocked; |
| |
| /* i/o region */ |
| #define SDRICOH_PCI_REGION 0 |
| #define SDRICOH_PCI_REGION_SIZE 0x1000 |
| |
| /* registers */ |
| #define R104_VERSION 0x104 |
| #define R200_CMD 0x200 |
| #define R204_CMD_ARG 0x204 |
| #define R208_DATAIO 0x208 |
| #define R20C_RESP 0x20c |
| #define R21C_STATUS 0x21c |
| #define R2E0_INIT 0x2e0 |
| #define R2E4_STATUS_RESP 0x2e4 |
| #define R2F0_RESET 0x2f0 |
| #define R224_MODE 0x224 |
| #define R226_BLOCKSIZE 0x226 |
| #define R228_POWER 0x228 |
| #define R230_DATA 0x230 |
| |
| /* flags for the R21C_STATUS register */ |
| #define STATUS_CMD_FINISHED 0x00000001 |
| #define STATUS_TRANSFER_FINISHED 0x00000004 |
| #define STATUS_CARD_INSERTED 0x00000020 |
| #define STATUS_CARD_LOCKED 0x00000080 |
| #define STATUS_CMD_TIMEOUT 0x00400000 |
| #define STATUS_READY_TO_READ 0x01000000 |
| #define STATUS_READY_TO_WRITE 0x02000000 |
| #define STATUS_BUSY 0x40000000 |
| |
| /* timeouts */ |
| #define INIT_TIMEOUT 100 |
| #define CMD_TIMEOUT 100000 |
| #define TRANSFER_TIMEOUT 100000 |
| #define BUSY_TIMEOUT 32767 |
| |
| /* list of supported pcmcia devices */ |
| static struct pcmcia_device_id pcmcia_ids[] = { |
| /* vendor and device strings followed by their crc32 hashes */ |
| PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed, |
| 0xc3901202), |
| PCMCIA_DEVICE_NULL, |
| }; |
| |
| MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids); |
| |
| /* mmc privdata */ |
| struct sdricoh_host { |
| struct device *dev; |
| struct mmc_host *mmc; /* MMC structure */ |
| unsigned char __iomem *iobase; |
| struct pci_dev *pci_dev; |
| int app_cmd; |
| }; |
| |
| /***************** register i/o helper functions *****************************/ |
| |
| static inline unsigned int sdricoh_readl(struct sdricoh_host *host, |
| unsigned int reg) |
| { |
| unsigned int value = readl(host->iobase + reg); |
| dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value); |
| return value; |
| } |
| |
| static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg, |
| unsigned int value) |
| { |
| writel(value, host->iobase + reg); |
| dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value); |
| |
| } |
| |
| static inline unsigned int sdricoh_readw(struct sdricoh_host *host, |
| unsigned int reg) |
| { |
| unsigned int value = readw(host->iobase + reg); |
| dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); |
| return value; |
| } |
| |
| static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg, |
| unsigned short value) |
| { |
| writew(value, host->iobase + reg); |
| dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value); |
| } |
| |
| static inline unsigned int sdricoh_readb(struct sdricoh_host *host, |
| unsigned int reg) |
| { |
| unsigned int value = readb(host->iobase + reg); |
| dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); |
| return value; |
| } |
| |
| static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted, |
| unsigned int timeout){ |
| unsigned int loop; |
| unsigned int status = 0; |
| struct device *dev = host->dev; |
| for (loop = 0; loop < timeout; loop++) { |
| status = sdricoh_readl(host, R21C_STATUS); |
| sdricoh_writel(host, R2E4_STATUS_RESP, status); |
| if (status & wanted) |
| break; |
| } |
| |
| if (loop == timeout) { |
| dev_err(dev, "query_status: timeout waiting for %x\n", wanted); |
| return -ETIMEDOUT; |
| } |
| |
| /* do not do this check in the loop as some commands fail otherwise */ |
| if (status & 0x7F0000) { |
| dev_err(dev, "waiting for status bit %x failed\n", wanted); |
| return -EINVAL; |
| } |
| return 0; |
| |
| } |
| |
| static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode, |
| unsigned int arg) |
| { |
| unsigned int status; |
| int result = 0; |
| unsigned int loop = 0; |
| /* reset status reg? */ |
| sdricoh_writel(host, R21C_STATUS, 0x18); |
| /* fill parameters */ |
| sdricoh_writel(host, R204_CMD_ARG, arg); |
| sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode); |
| /* wait for command completion */ |
| if (opcode) { |
| for (loop = 0; loop < CMD_TIMEOUT; loop++) { |
| status = sdricoh_readl(host, R21C_STATUS); |
| sdricoh_writel(host, R2E4_STATUS_RESP, status); |
| if (status & STATUS_CMD_FINISHED) |
| break; |
| } |
| /* don't check for timeout in the loop it is not always |
| reset correctly |
| */ |
| if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT) |
| result = -ETIMEDOUT; |
| |
| } |
| |
| return result; |
| |
| } |
| |
| static int sdricoh_reset(struct sdricoh_host *host) |
| { |
| dev_dbg(host->dev, "reset\n"); |
| sdricoh_writel(host, R2F0_RESET, 0x10001); |
| sdricoh_writel(host, R2E0_INIT, 0x10000); |
| if (sdricoh_readl(host, R2E0_INIT) != 0x10000) |
| return -EIO; |
| sdricoh_writel(host, R2E0_INIT, 0x10007); |
| |
| sdricoh_writel(host, R224_MODE, 0x2000000); |
| sdricoh_writel(host, R228_POWER, 0xe0); |
| |
| |
| /* status register ? */ |
| sdricoh_writel(host, R21C_STATUS, 0x18); |
| |
| return 0; |
| } |
| |
| static int sdricoh_blockio(struct sdricoh_host *host, int read, |
| u8 *buf, int len) |
| { |
| int size; |
| u32 data = 0; |
| /* wait until the data is available */ |
| if (read) { |
| if (sdricoh_query_status(host, STATUS_READY_TO_READ, |
| TRANSFER_TIMEOUT)) |
| return -ETIMEDOUT; |
| sdricoh_writel(host, R21C_STATUS, 0x18); |
| /* read data */ |
| while (len) { |
| data = sdricoh_readl(host, R230_DATA); |
| size = min(len, 4); |
| len -= size; |
| while (size) { |
| *buf = data & 0xFF; |
| buf++; |
| data >>= 8; |
| size--; |
| } |
| } |
| } else { |
| if (sdricoh_query_status(host, STATUS_READY_TO_WRITE, |
| TRANSFER_TIMEOUT)) |
| return -ETIMEDOUT; |
| sdricoh_writel(host, R21C_STATUS, 0x18); |
| /* write data */ |
| while (len) { |
| size = min(len, 4); |
| len -= size; |
| while (size) { |
| data >>= 8; |
| data |= (u32)*buf << 24; |
| buf++; |
| size--; |
| } |
| sdricoh_writel(host, R230_DATA, data); |
| } |
| } |
| |
| if (len) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct sdricoh_host *host = mmc_priv(mmc); |
| struct mmc_command *cmd = mrq->cmd; |
| struct mmc_data *data = cmd->data; |
| struct device *dev = host->dev; |
| unsigned char opcode = cmd->opcode; |
| int i; |
| |
| dev_dbg(dev, "=============================\n"); |
| dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode); |
| |
| sdricoh_writel(host, R21C_STATUS, 0x18); |
| |
| /* MMC_APP_CMDs need some special handling */ |
| if (host->app_cmd) { |
| opcode |= 64; |
| host->app_cmd = 0; |
| } else if (opcode == 55) |
| host->app_cmd = 1; |
| |
| /* read/write commands seem to require this */ |
| if (data) { |
| sdricoh_writew(host, R226_BLOCKSIZE, data->blksz); |
| sdricoh_writel(host, R208_DATAIO, 0); |
| } |
| |
| cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg); |
| |
| /* read response buffer */ |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) { |
| /* CRC is stripped so we need to do some shifting. */ |
| for (i = 0; i < 4; i++) { |
| cmd->resp[i] = |
| sdricoh_readl(host, |
| R20C_RESP + (3 - i) * 4) << 8; |
| if (i != 3) |
| cmd->resp[i] |= |
| sdricoh_readb(host, R20C_RESP + |
| (3 - i) * 4 - 1); |
| } |
| } else |
| cmd->resp[0] = sdricoh_readl(host, R20C_RESP); |
| } |
| |
| /* transfer data */ |
| if (data && cmd->error == 0) { |
| dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i " |
| "sg length %i\n", data->blksz, data->blocks, |
| data->sg_len, data->sg->length); |
| |
| /* enter data reading mode */ |
| sdricoh_writel(host, R21C_STATUS, 0x837f031e); |
| for (i = 0; i < data->blocks; i++) { |
| size_t len = data->blksz; |
| u8 *buf; |
| struct page *page; |
| int result; |
| page = sg_page(data->sg); |
| |
| buf = kmap(page) + data->sg->offset + (len * i); |
| result = |
| sdricoh_blockio(host, |
| data->flags & MMC_DATA_READ, buf, len); |
| kunmap(page); |
| flush_dcache_page(page); |
| if (result) { |
| dev_err(dev, "sdricoh_request: cmd %i " |
| "block transfer failed\n", cmd->opcode); |
| cmd->error = result; |
| break; |
| } else |
| data->bytes_xfered += len; |
| } |
| |
| sdricoh_writel(host, R208_DATAIO, 1); |
| |
| if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED, |
| TRANSFER_TIMEOUT)) { |
| dev_err(dev, "sdricoh_request: transfer end error\n"); |
| cmd->error = -EINVAL; |
| } |
| } |
| /* FIXME check busy flag */ |
| |
| mmc_request_done(mmc, mrq); |
| dev_dbg(dev, "=============================\n"); |
| } |
| |
| static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct sdricoh_host *host = mmc_priv(mmc); |
| dev_dbg(host->dev, "set_ios\n"); |
| |
| if (ios->power_mode == MMC_POWER_ON) { |
| sdricoh_writel(host, R228_POWER, 0xc0e0); |
| |
| if (ios->bus_width == MMC_BUS_WIDTH_4) { |
| sdricoh_writel(host, R224_MODE, 0x2000300); |
| sdricoh_writel(host, R228_POWER, 0x40e0); |
| } else { |
| sdricoh_writel(host, R224_MODE, 0x2000340); |
| } |
| |
| } else if (ios->power_mode == MMC_POWER_UP) { |
| sdricoh_writel(host, R224_MODE, 0x2000320); |
| sdricoh_writel(host, R228_POWER, 0xe0); |
| } |
| } |
| |
| static int sdricoh_get_ro(struct mmc_host *mmc) |
| { |
| struct sdricoh_host *host = mmc_priv(mmc); |
| unsigned int status; |
| |
| status = sdricoh_readl(host, R21C_STATUS); |
| sdricoh_writel(host, R2E4_STATUS_RESP, status); |
| |
| /* some notebooks seem to have the locked flag switched */ |
| if (switchlocked) |
| return !(status & STATUS_CARD_LOCKED); |
| |
| return (status & STATUS_CARD_LOCKED); |
| } |
| |
| static struct mmc_host_ops sdricoh_ops = { |
| .request = sdricoh_request, |
| .set_ios = sdricoh_set_ios, |
| .get_ro = sdricoh_get_ro, |
| }; |
| |
| /* initialize the control and register it to the mmc framework */ |
| static int sdricoh_init_mmc(struct pci_dev *pci_dev, |
| struct pcmcia_device *pcmcia_dev) |
| { |
| int result = 0; |
| void __iomem *iobase = NULL; |
| struct mmc_host *mmc = NULL; |
| struct sdricoh_host *host = NULL; |
| struct device *dev = &pcmcia_dev->dev; |
| /* map iomem */ |
| if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) != |
| SDRICOH_PCI_REGION_SIZE) { |
| dev_dbg(dev, "unexpected pci resource len\n"); |
| return -ENODEV; |
| } |
| iobase = |
| pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE); |
| if (!iobase) { |
| dev_err(dev, "unable to map iobase\n"); |
| return -ENODEV; |
| } |
| /* check version? */ |
| if (readl(iobase + R104_VERSION) != 0x4000) { |
| dev_dbg(dev, "no supported mmc controller found\n"); |
| result = -ENODEV; |
| goto err; |
| } |
| /* allocate privdata */ |
| mmc = pcmcia_dev->priv = |
| mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev); |
| if (!mmc) { |
| dev_err(dev, "mmc_alloc_host failed\n"); |
| result = -ENOMEM; |
| goto err; |
| } |
| host = mmc_priv(mmc); |
| |
| host->iobase = iobase; |
| host->dev = dev; |
| host->pci_dev = pci_dev; |
| |
| mmc->ops = &sdricoh_ops; |
| |
| /* FIXME: frequency and voltage handling is done by the controller |
| */ |
| mmc->f_min = 450000; |
| mmc->f_max = 24000000; |
| mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; |
| mmc->caps |= MMC_CAP_4_BIT_DATA; |
| |
| mmc->max_seg_size = 1024 * 512; |
| mmc->max_blk_size = 512; |
| |
| /* reset the controler */ |
| if (sdricoh_reset(host)) { |
| dev_dbg(dev, "could not reset\n"); |
| result = -EIO; |
| goto err; |
| |
| } |
| |
| result = mmc_add_host(mmc); |
| |
| if (!result) { |
| dev_dbg(dev, "mmc host registered\n"); |
| return 0; |
| } |
| |
| err: |
| if (iobase) |
| iounmap(iobase); |
| if (mmc) |
| mmc_free_host(mmc); |
| |
| return result; |
| } |
| |
| /* search for supported mmc controllers */ |
| static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) |
| { |
| struct pci_dev *pci_dev = NULL; |
| |
| dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device" |
| " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]); |
| |
| /* search pci cardbus bridge that contains the mmc controler */ |
| /* the io region is already claimed by yenta_socket... */ |
| while ((pci_dev = |
| pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, |
| pci_dev))) { |
| /* try to init the device */ |
| if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) { |
| dev_info(&pcmcia_dev->dev, "MMC controller found\n"); |
| return 0; |
| } |
| |
| } |
| dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n"); |
| return -ENODEV; |
| } |
| |
| static void sdricoh_pcmcia_detach(struct pcmcia_device *link) |
| { |
| struct mmc_host *mmc = link->priv; |
| |
| dev_dbg(&link->dev, "detach\n"); |
| |
| /* remove mmc host */ |
| if (mmc) { |
| struct sdricoh_host *host = mmc_priv(mmc); |
| mmc_remove_host(mmc); |
| pci_iounmap(host->pci_dev, host->iobase); |
| pci_dev_put(host->pci_dev); |
| mmc_free_host(mmc); |
| } |
| pcmcia_disable_device(link); |
| |
| } |
| |
| #ifdef CONFIG_PM |
| static int sdricoh_pcmcia_suspend(struct pcmcia_device *link) |
| { |
| struct mmc_host *mmc = link->priv; |
| dev_dbg(&link->dev, "suspend\n"); |
| mmc_suspend_host(mmc, PMSG_SUSPEND); |
| return 0; |
| } |
| |
| static int sdricoh_pcmcia_resume(struct pcmcia_device *link) |
| { |
| struct mmc_host *mmc = link->priv; |
| dev_dbg(&link->dev, "resume\n"); |
| sdricoh_reset(mmc_priv(mmc)); |
| mmc_resume_host(mmc); |
| return 0; |
| } |
| #else |
| #define sdricoh_pcmcia_suspend NULL |
| #define sdricoh_pcmcia_resume NULL |
| #endif |
| |
| static struct pcmcia_driver sdricoh_driver = { |
| .drv = { |
| .name = DRIVER_NAME, |
| }, |
| .probe = sdricoh_pcmcia_probe, |
| .remove = sdricoh_pcmcia_detach, |
| .id_table = pcmcia_ids, |
| .suspend = sdricoh_pcmcia_suspend, |
| .resume = sdricoh_pcmcia_resume, |
| }; |
| |
| /*****************************************************************************\ |
| * * |
| * Driver init/exit * |
| * * |
| \*****************************************************************************/ |
| |
| static int __init sdricoh_drv_init(void) |
| { |
| return pcmcia_register_driver(&sdricoh_driver); |
| } |
| |
| static void __exit sdricoh_drv_exit(void) |
| { |
| pcmcia_unregister_driver(&sdricoh_driver); |
| } |
| |
| module_init(sdricoh_drv_init); |
| module_exit(sdricoh_drv_exit); |
| |
| module_param(switchlocked, uint, 0444); |
| |
| MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>"); |
| MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver"); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_PARM_DESC(switchlocked, "Switch the cards locked status." |
| "Use this when unlocked cards are shown readonly (default 0)"); |