blob: 67812c5ac1f980a0ab9f94f1cc08ac5ebeca6321 [file] [log] [blame]
/*
* arch/arm/mach-imxads/include/mach/irqs.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ARM_IRQS_H__
#define __ARM_IRQS_H__
/* Use the imx definitions */
#include <mach/hardware.h>
/*
* IMX Interrupt numbers
*
*/
#define INT_SOFTINT 0
#define CSI_INT 6
#define DSPA_MAC_INT 7
#define DSPA_INT 8
#define COMP_INT 9
#define MSHC_XINT 10
#define GPIO_INT_PORTA 11
#define GPIO_INT_PORTB 12
#define GPIO_INT_PORTC 13
#define LCDC_INT 14
#define SIM_INT 15
#define SIM_DATA_INT 16
#define RTC_INT 17
#define RTC_SAMINT 18
#define UART2_MINT_PFERR 19
#define UART2_MINT_RTS 20
#define UART2_MINT_DTR 21
#define UART2_MINT_UARTC 22
#define UART2_MINT_TX 23
#define UART2_MINT_RX 24
#define UART1_MINT_PFERR 25
#define UART1_MINT_RTS 26
#define UART1_MINT_DTR 27
#define UART1_MINT_UARTC 28
#define UART1_MINT_TX 29
#define UART1_MINT_RX 30
#define VOICE_DAC_INT 31
#define VOICE_ADC_INT 32
#define PEN_DATA_INT 33
#define PWM_INT 34
#define SDHC_INT 35
#define I2C_INT 39
#define CSPI_INT 41
#define SSI_TX_INT 42
#define SSI_TX_ERR_INT 43
#define SSI_RX_INT 44
#define SSI_RX_ERR_INT 45
#define TOUCH_INT 46
#define USBD_INT0 47
#define USBD_INT1 48
#define USBD_INT2 49
#define USBD_INT3 50
#define USBD_INT4 51
#define USBD_INT5 52
#define USBD_INT6 53
#define BTSYS_INT 55
#define BTTIM_INT 56
#define BTWUI_INT 57
#define TIM2_INT 58
#define TIM1_INT 59
#define DMA_ERR 60
#define DMA_INT 61
#define GPIO_INT_PORTD 62
#define IMX_IRQS (64)
/* note: the IMX has four gpio ports (A-D), but only
* the following pins are connected to the outside
* world:
*
* PORT A: bits 0-31
* PORT B: bits 8-31
* PORT C: bits 3-17
* PORT D: bits 6-31
*
* We map these interrupts straight on. As a result we have
* several holes in the interrupt mapping. We do this for two
* reasons:
* - mapping the interrupts without holes would get
* far more complicated
* - Motorola could well decide to bring some processor
* with more pins connected
*/
#define IRQ_GPIOA(x) (IMX_IRQS + x)
#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
/* decode irq number to use with IMR(x), ISR(x) and friends */
#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
/* all normal IRQs can be FIQs */
#define FIQ_START 0
/* switch betwean IRQ and FIQ */
extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
#define NR_IRQS (IRQ_GPIOD(32) + 1)
#define IRQ_GPIO(x)
#endif