arch/powerpc/boot/dts/fsl/t4240si-post.dtsi - maze/linux - Git at Google

 /*
  * T4240 Silicon/SoC Device Tree Source (post include)
  *
  * Copyright 2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	compatible = "fsl,ifc", "simple-bus";
 	interrupts = <25 2 0 0>;
 };

 /* controller at 0x240000 */
 &pci0 {
 	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0x0 0xff>;
 	interrupts = <20 2 0 0>;
 	pcie@0 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		reg = <0 0 0 0 0>;
 		interrupts = <20 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 40 1 0 0
 			0000 0 0 2 &mpic 1 1 0 0
 			0000 0 0 3 &mpic 2 1 0 0
 			0000 0 0 4 &mpic 3 1 0 0
 			>;
 	};
 };

 /* controller at 0x250000 */
 &pci1 {
 	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0 0xff>;
 	interrupts = <21 2 0 0>;
 	pcie@0 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		reg = <0 0 0 0 0>;
 		interrupts = <21 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 41 1 0 0
 			0000 0 0 2 &mpic 5 1 0 0
 			0000 0 0 3 &mpic 6 1 0 0
 			0000 0 0 4 &mpic 7 1 0 0
 			>;
 	};
 };

 /* controller at 0x260000 */
 &pci2 {
 	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0x0 0xff>;
 	interrupts = <22 2 0 0>;
 	pcie@0 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		reg = <0 0 0 0 0>;
 		interrupts = <22 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 42 1 0 0
 			0000 0 0 2 &mpic 9 1 0 0
 			0000 0 0 3 &mpic 10 1 0 0
 			0000 0 0 4 &mpic 11 1 0 0
 			>;
 	};
 };

 /* controller at 0x270000 */
 &pci3 {
 	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0x0 0xff>;
 	interrupts = <23 2 0 0>;
 	pcie@0 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		reg = <0 0 0 0 0>;
 		interrupts = <23 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 43 1 0 0
 			0000 0 0 2 &mpic 0 1 0 0
 			0000 0 0 3 &mpic 4 1 0 0
 			0000 0 0 4 &mpic 8 1 0 0
 			>;
 	};
 };

 &rio {
 	compatible = "fsl,srio";
 	interrupts = <16 2 1 11>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 	ranges;

 	port1 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <1>;
 	};

 	port2 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <2>;
 	};
 };

 &dcsr {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "fsl,dcsr", "simple-bus";

 	dcsr-epu@0 {
 		compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0
 			      94 2 0 0
 			      95 2 0 0>;
 		reg = <0x0 0x1000>;
 	};
 	dcsr-npc {
 		compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc";
 		reg = <0x1000 0x1000 0x1002000 0x10000>;
 	};
 	dcsr-nxc@2000 {
 		compatible = "fsl,dcsr-nxc";
 		reg = <0x2000 0x1000>;
 	};
 	dcsr-corenet {
 		compatible = "fsl,dcsr-corenet";
 		reg = <0x8000 0x1000 0x1A000 0x1000>;
 	};
 	dcsr-dpaa@9000 {
 		compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa";
 		reg = <0x9000 0x1000>;
 	};
 	dcsr-ocn@11000 {
 		compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn";
 		reg = <0x11000 0x1000>;
 	};
 	dcsr-ddr@12000 {
 		compatible = "fsl,dcsr-ddr";
 		dev-handle = <&ddr1>;
 		reg = <0x12000 0x1000>;
 	};
 	dcsr-ddr@13000 {
 		compatible = "fsl,dcsr-ddr";
 		dev-handle = <&ddr2>;
 		reg = <0x13000 0x1000>;
 	};
 	dcsr-ddr@14000 {
 		compatible = "fsl,dcsr-ddr";
 		dev-handle = <&ddr3>;
 		reg = <0x14000 0x1000>;
 	};
 	dcsr-nal@18000 {
 		compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal";
 		reg = <0x18000 0x1000>;
 	};
 	dcsr-rcpm@22000 {
 		compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm";
 		reg = <0x22000 0x1000>;
 	};
 	dcsr-snpc@30000 {
 		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
 		reg = <0x30000 0x1000 0x1022000 0x10000>;
 	};
 	dcsr-snpc@31000 {
 		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
 		reg = <0x31000 0x1000 0x1042000 0x10000>;
 	};
 	dcsr-snpc@32000 {
 		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
 		reg = <0x32000 0x1000 0x1062000 0x10000>;
 	};
 	dcsr-cpu-sb-proxy@100000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu0>;
 		reg = <0x100000 0x1000 0x101000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@108000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu1>;
 		reg = <0x108000 0x1000 0x109000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@110000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu2>;
 		reg = <0x110000 0x1000 0x111000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@118000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu3>;
 		reg = <0x118000 0x1000 0x119000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@120000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu4>;
 		reg = <0x120000 0x1000 0x121000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@128000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu5>;
 		reg = <0x128000 0x1000 0x129000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@130000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu6>;
 		reg = <0x130000 0x1000 0x131000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@138000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu7>;
 		reg = <0x138000 0x1000 0x139000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@140000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu8>;
 		reg = <0x140000 0x1000 0x141000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@148000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu9>;
 		reg = <0x148000 0x1000 0x149000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@150000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu10>;
 		reg = <0x150000 0x1000 0x151000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@158000 {
 		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu11>;
 		reg = <0x158000 0x1000 0x159000 0x1000>;
 	};
 };

 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	device_type = "soc";
 	compatible = "simple-bus";

 	soc-sram-error {
 		compatible = "fsl,soc-sram-error";
 		interrupts = <16 2 1 29>;
 	};

 	corenet-law@0 {
 		compatible = "fsl,corenet-law";
 		reg = <0x0 0x1000>;
 		fsl,num-laws = <32>;
 	};

 	ddr1: memory-controller@8000 {
 		compatible = "fsl,qoriq-memory-controller-v4.7",
 				"fsl,qoriq-memory-controller";
 		reg = <0x8000 0x1000>;
 		interrupts = <16 2 1 23>;
 	};

 	ddr2: memory-controller@9000 {
 		compatible = "fsl,qoriq-memory-controller-v4.7",
 				"fsl,qoriq-memory-controller";
 		reg = <0x9000 0x1000>;
 		interrupts = <16 2 1 22>;
 	};

 	ddr3: memory-controller@a000 {
 		compatible = "fsl,qoriq-memory-controller-v4.7",
 				"fsl,qoriq-memory-controller";
 		reg = <0xa000 0x1000>;
 		interrupts = <16 2 1 21>;
 	};

 	cpc: l3-cache-controller@10000 {
 		compatible = "fsl,t4240-l3-cache-controller", "cache";
 		reg = <0x10000 0x1000
 		       0x11000 0x1000
 		       0x12000 0x1000>;
 		interrupts = <16 2 1 27
 			      16 2 1 26
 			      16 2 1 25>;
 	};

 	corenet-cf@18000 {
 		compatible = "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
 		fsl,ccf-num-snoopids = <32>;
 	};

 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x6000>;
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
 	};

 /include/ "qoriq-mpic4.3.dtsi"

 	guts: global-utilities@e0000 {
 		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
 		reg = <0xe0000 0xe00>;
 		fsl,has-rstcr;
 		fsl,liodn-bits = <12>;
 	};

 	clockgen: global-utilities@e1000 {
 		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
 		ranges = <0x0 0xe1000 0x1000>;
 		reg = <0xe1000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;

 		sysclk: sysclk {
 			#clock-cells = <0>;
 			compatible = "fsl,qoriq-sysclk-2.0";
 			clock-output-names = "sysclk";
 		};

 		pll0: pll0@800 {
 			#clock-cells = <1>;
 			reg = <0x800 0x4>;
 			compatible = "fsl,qoriq-core-pll-2.0";
 			clocks = <&sysclk>;
 			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
 		};

 		pll1: pll1@820 {
 			#clock-cells = <1>;
 			reg = <0x820 0x4>;
 			compatible = "fsl,qoriq-core-pll-2.0";
 			clocks = <&sysclk>;
 			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
 		};

 		pll2: pll2@840 {
 			#clock-cells = <1>;
 			reg = <0x840 0x4>;
 			compatible = "fsl,qoriq-core-pll-2.0";
 			clocks = <&sysclk>;
 			clock-output-names = "pll2", "pll2-div2", "pll2-div4";
 		};

 		pll3: pll3@860 {
 			#clock-cells = <1>;
 			reg = <0x860 0x4>;
 			compatible = "fsl,qoriq-core-pll-2.0";
 			clocks = <&sysclk>;
 			clock-output-names = "pll3", "pll3-div2", "pll3-div4";
 		};

 		pll4: pll4@880 {
 			#clock-cells = <1>;
 			reg = <0x880 0x4>;
 			compatible = "fsl,qoriq-core-pll-2.0";
 			clocks = <&sysclk>;
 			clock-output-names = "pll4", "pll4-div2", "pll4-div4";
 		};

 		mux0: mux0@0 {
 			#clock-cells = <0>;
 			reg = <0x0 0x4>;
 			compatible = "fsl,qoriq-core-mux-2.0";
 			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
 				<&pll1 0>, <&pll1 1>, <&pll1 2>,
 				<&pll2 0>, <&pll2 1>, <&pll2 2>;
 			clock-names = "pll0", "pll0-div2", "pll0-div4",
 				"pll1", "pll1-div2", "pll1-div4",
 				"pll2", "pll2-div2", "pll2-div4";
 			clock-output-names = "cmux0";
 		};

 		mux1: mux1@20 {
 			#clock-cells = <0>;
 			reg = <0x20 0x4>;
 			compatible = "fsl,qoriq-core-mux-2.0";
 			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
 				<&pll1 0>, <&pll1 1>, <&pll1 2>,
 				<&pll2 0>, <&pll2 1>, <&pll2 2>;
 			clock-names = "pll0", "pll0-div2", "pll0-div4",
 				"pll1", "pll1-div2", "pll1-div4",
 				"pll2", "pll2-div2", "pll2-div4";
 			clock-output-names = "cmux1";
 		};

 		mux2: mux2@40 {
 			#clock-cells = <0>;
 			reg = <0x40 0x4>;
 			compatible = "fsl,qoriq-core-mux-2.0";
 			clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
 				<&pll4 0>, <&pll4 1>, <&pll4 2>;
 			clock-names = "pll3", "pll3-div2", "pll3-div4",
 				"pll4", "pll4-div2", "pll4-div4";
 			clock-output-names = "cmux2";
 		};
 	};

 	rcpm: global-utilities@e2000 {
 		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
 		reg = <0xe2000 0x1000>;
 	};

 	sfp: sfp@e8000 {
 		compatible = "fsl,t4240-sfp";
 		reg	   = <0xe8000 0x1000>;
 	};

 	serdes: serdes@ea000 {
 		compatible = "fsl,t4240-serdes";
 		reg	   = <0xea000 0x4000>;
 	};

 /include/ "elo3-dma-0.dtsi"
 /include/ "elo3-dma-1.dtsi"

 /include/ "qoriq-espi-0.dtsi"
 	spi@110000 {
 		fsl,espi-num-chipselects = <4>;
 	};

 /include/ "qoriq-esdhc-0.dtsi"
 	sdhc@114000 {
 		compatible = "fsl,t4240-esdhc", "fsl,esdhc";
 		sdhci,auto-cmd12;
 	};
 /include/ "qoriq-i2c-0.dtsi"
 /include/ "qoriq-i2c-1.dtsi"
 /include/ "qoriq-duart-0.dtsi"
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-gpio-1.dtsi"
 /include/ "qoriq-gpio-2.dtsi"
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
 			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
 			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};
 /include/ "qoriq-sata2-0.dtsi"
 /include/ "qoriq-sata2-1.dtsi"
 /include/ "qoriq-sec5.0-0.dtsi"

 	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,t4240-l2-cache-controller";
 		reg = <0xc20000 0x40000>;
 		next-level-cache = <&cpc>;
 	};
 	L2_2: l2-cache-controller@c60000 {
 		compatible = "fsl,t4240-l2-cache-controller";
 		reg = <0xc60000 0x40000>;
 		next-level-cache = <&cpc>;
 	};
 	L2_3: l2-cache-controller@ca0000 {
 		compatible = "fsl,t4240-l2-cache-controller";
 		reg = <0xca0000 0x40000>;
 		next-level-cache = <&cpc>;
 	};
 };
	/*
	* T4240 Silicon/SoC Device Tree Source (post include)
	*
	* Copyright 2012 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	&ifc {
	#address-cells = <2>;
	#size-cells = <1>;
	compatible = "fsl,ifc", "simple-bus";
	interrupts = <25 2 0 0>;
	};

	/* controller at 0x240000 */
	&pci0 {
	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <20 2 0 0>;
	pcie@0 {
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	reg = <0 0 0 0 0>;
	interrupts = <20 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 40 1 0 0
	0000 0 0 2 &mpic 1 1 0 0
	0000 0 0 3 &mpic 2 1 0 0
	0000 0 0 4 &mpic 3 1 0 0
	>;
	};
	};

	/* controller at 0x250000 */
	&pci1 {
	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 0xff>;
	interrupts = <21 2 0 0>;
	pcie@0 {
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	reg = <0 0 0 0 0>;
	interrupts = <21 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 41 1 0 0
	0000 0 0 2 &mpic 5 1 0 0
	0000 0 0 3 &mpic 6 1 0 0
	0000 0 0 4 &mpic 7 1 0 0
	>;
	};
	};

	/* controller at 0x260000 */
	&pci2 {
	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <22 2 0 0>;
	pcie@0 {
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	reg = <0 0 0 0 0>;
	interrupts = <22 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 42 1 0 0
	0000 0 0 2 &mpic 9 1 0 0
	0000 0 0 3 &mpic 10 1 0 0
	0000 0 0 4 &mpic 11 1 0 0
	>;
	};
	};

	/* controller at 0x270000 */
	&pci3 {
	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <23 2 0 0>;
	pcie@0 {
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	reg = <0 0 0 0 0>;
	interrupts = <23 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 43 1 0 0
	0000 0 0 2 &mpic 0 1 0 0
	0000 0 0 3 &mpic 4 1 0 0
	0000 0 0 4 &mpic 8 1 0 0
	>;
	};
	};

	&rio {
	compatible = "fsl,srio";
	interrupts = <16 2 1 11>;
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	port1 {
	#address-cells = <2>;
	#size-cells = <2>;
	cell-index = <1>;
	};

	port2 {
	#address-cells = <2>;
	#size-cells = <2>;
	cell-index = <2>;
	};
	};

	&dcsr {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,dcsr", "simple-bus";

	dcsr-epu@0 {
	compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu";
	interrupts = <52 2 0 0
	84 2 0 0
	85 2 0 0
	94 2 0 0
	95 2 0 0>;
	reg = <0x0 0x1000>;
	};
	dcsr-npc {
	compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc";
	reg = <0x1000 0x1000 0x1002000 0x10000>;
	};
	dcsr-nxc@2000 {
	compatible = "fsl,dcsr-nxc";
	reg = <0x2000 0x1000>;
	};
	dcsr-corenet {
	compatible = "fsl,dcsr-corenet";
	reg = <0x8000 0x1000 0x1A000 0x1000>;
	};
	dcsr-dpaa@9000 {
	compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa";
	reg = <0x9000 0x1000>;
	};
	dcsr-ocn@11000 {
	compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn";
	reg = <0x11000 0x1000>;
	};
	dcsr-ddr@12000 {
	compatible = "fsl,dcsr-ddr";
	dev-handle = <&ddr1>;
	reg = <0x12000 0x1000>;
	};
	dcsr-ddr@13000 {
	compatible = "fsl,dcsr-ddr";
	dev-handle = <&ddr2>;
	reg = <0x13000 0x1000>;
	};
	dcsr-ddr@14000 {
	compatible = "fsl,dcsr-ddr";
	dev-handle = <&ddr3>;
	reg = <0x14000 0x1000>;
	};
	dcsr-nal@18000 {
	compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal";
	reg = <0x18000 0x1000>;
	};
	dcsr-rcpm@22000 {
	compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm";
	reg = <0x22000 0x1000>;
	};
	dcsr-snpc@30000 {
	compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
	reg = <0x30000 0x1000 0x1022000 0x10000>;
	};
	dcsr-snpc@31000 {
	compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
	reg = <0x31000 0x1000 0x1042000 0x10000>;
	};
	dcsr-snpc@32000 {
	compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
	reg = <0x32000 0x1000 0x1062000 0x10000>;
	};
	dcsr-cpu-sb-proxy@100000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu0>;
	reg = <0x100000 0x1000 0x101000 0x1000>;
	};
	dcsr-cpu-sb-proxy@108000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu1>;
	reg = <0x108000 0x1000 0x109000 0x1000>;
	};
	dcsr-cpu-sb-proxy@110000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu2>;
	reg = <0x110000 0x1000 0x111000 0x1000>;
	};
	dcsr-cpu-sb-proxy@118000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu3>;
	reg = <0x118000 0x1000 0x119000 0x1000>;
	};
	dcsr-cpu-sb-proxy@120000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu4>;
	reg = <0x120000 0x1000 0x121000 0x1000>;
	};
	dcsr-cpu-sb-proxy@128000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu5>;
	reg = <0x128000 0x1000 0x129000 0x1000>;
	};
	dcsr-cpu-sb-proxy@130000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu6>;
	reg = <0x130000 0x1000 0x131000 0x1000>;
	};
	dcsr-cpu-sb-proxy@138000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu7>;
	reg = <0x138000 0x1000 0x139000 0x1000>;
	};
	dcsr-cpu-sb-proxy@140000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu8>;
	reg = <0x140000 0x1000 0x141000 0x1000>;
	};
	dcsr-cpu-sb-proxy@148000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu9>;
	reg = <0x148000 0x1000 0x149000 0x1000>;
	};
	dcsr-cpu-sb-proxy@150000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu10>;
	reg = <0x150000 0x1000 0x151000 0x1000>;
	};
	dcsr-cpu-sb-proxy@158000 {
	compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu11>;
	reg = <0x158000 0x1000 0x159000 0x1000>;
	};
	};

	&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "simple-bus";

	soc-sram-error {
	compatible = "fsl,soc-sram-error";
	interrupts = <16 2 1 29>;
	};

	corenet-law@0 {
	compatible = "fsl,corenet-law";
	reg = <0x0 0x1000>;
	fsl,num-laws = <32>;
	};

	ddr1: memory-controller@8000 {
	compatible = "fsl,qoriq-memory-controller-v4.7",
	"fsl,qoriq-memory-controller";
	reg = <0x8000 0x1000>;
	interrupts = <16 2 1 23>;
	};

	ddr2: memory-controller@9000 {
	compatible = "fsl,qoriq-memory-controller-v4.7",
	"fsl,qoriq-memory-controller";
	reg = <0x9000 0x1000>;
	interrupts = <16 2 1 22>;
	};

	ddr3: memory-controller@a000 {
	compatible = "fsl,qoriq-memory-controller-v4.7",
	"fsl,qoriq-memory-controller";
	reg = <0xa000 0x1000>;
	interrupts = <16 2 1 21>;
	};

	cpc: l3-cache-controller@10000 {
	compatible = "fsl,t4240-l3-cache-controller", "cache";
	reg = <0x10000 0x1000
	0x11000 0x1000
	0x12000 0x1000>;
	interrupts = <16 2 1 27
	16 2 1 26
	16 2 1 25>;
	};

	corenet-cf@18000 {
	compatible = "fsl,corenet-cf";
	reg = <0x18000 0x1000>;
	interrupts = <16 2 1 31>;
	fsl,ccf-num-csdids = <32>;
	fsl,ccf-num-snoopids = <32>;
	};

	iommu@20000 {
	compatible = "fsl,pamu-v1.0", "fsl,pamu";
	reg = <0x20000 0x6000>;
	interrupts = <
	24 2 0 0
	16 2 1 30>;
	};

	/include/ "qoriq-mpic4.3.dtsi"

	guts: global-utilities@e0000 {
	compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
	reg = <0xe0000 0xe00>;
	fsl,has-rstcr;
	fsl,liodn-bits = <12>;
	};

	clockgen: global-utilities@e1000 {
	compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
	ranges = <0x0 0xe1000 0x1000>;
	reg = <0xe1000 0x1000>;
	#address-cells = <1>;
	#size-cells = <1>;

	sysclk: sysclk {
	#clock-cells = <0>;
	compatible = "fsl,qoriq-sysclk-2.0";
	clock-output-names = "sysclk";
	};

	pll0: pll0@800 {
	#clock-cells = <1>;
	reg = <0x800 0x4>;
	compatible = "fsl,qoriq-core-pll-2.0";
	clocks = <&sysclk>;
	clock-output-names = "pll0", "pll0-div2", "pll0-div4";
	};

	pll1: pll1@820 {
	#clock-cells = <1>;
	reg = <0x820 0x4>;
	compatible = "fsl,qoriq-core-pll-2.0";
	clocks = <&sysclk>;
	clock-output-names = "pll1", "pll1-div2", "pll1-div4";
	};

	pll2: pll2@840 {
	#clock-cells = <1>;
	reg = <0x840 0x4>;
	compatible = "fsl,qoriq-core-pll-2.0";
	clocks = <&sysclk>;
	clock-output-names = "pll2", "pll2-div2", "pll2-div4";
	};

	pll3: pll3@860 {
	#clock-cells = <1>;
	reg = <0x860 0x4>;
	compatible = "fsl,qoriq-core-pll-2.0";
	clocks = <&sysclk>;
	clock-output-names = "pll3", "pll3-div2", "pll3-div4";
	};

	pll4: pll4@880 {
	#clock-cells = <1>;
	reg = <0x880 0x4>;
	compatible = "fsl,qoriq-core-pll-2.0";
	clocks = <&sysclk>;
	clock-output-names = "pll4", "pll4-div2", "pll4-div4";
	};

	mux0: mux0@0 {
	#clock-cells = <0>;
	reg = <0x0 0x4>;
	compatible = "fsl,qoriq-core-mux-2.0";
	clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
	<&pll1 0>, <&pll1 1>, <&pll1 2>,
	<&pll2 0>, <&pll2 1>, <&pll2 2>;
	clock-names = "pll0", "pll0-div2", "pll0-div4",
	"pll1", "pll1-div2", "pll1-div4",
	"pll2", "pll2-div2", "pll2-div4";
	clock-output-names = "cmux0";
	};

	mux1: mux1@20 {
	#clock-cells = <0>;
	reg = <0x20 0x4>;
	compatible = "fsl,qoriq-core-mux-2.0";
	clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
	<&pll1 0>, <&pll1 1>, <&pll1 2>,
	<&pll2 0>, <&pll2 1>, <&pll2 2>;
	clock-names = "pll0", "pll0-div2", "pll0-div4",
	"pll1", "pll1-div2", "pll1-div4",
	"pll2", "pll2-div2", "pll2-div4";
	clock-output-names = "cmux1";
	};

	mux2: mux2@40 {
	#clock-cells = <0>;
	reg = <0x40 0x4>;
	compatible = "fsl,qoriq-core-mux-2.0";
	clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
	<&pll4 0>, <&pll4 1>, <&pll4 2>;
	clock-names = "pll3", "pll3-div2", "pll3-div4",
	"pll4", "pll4-div2", "pll4-div4";
	clock-output-names = "cmux2";
	};
	};

	rcpm: global-utilities@e2000 {
	compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
	reg = <0xe2000 0x1000>;
	};

	sfp: sfp@e8000 {
	compatible = "fsl,t4240-sfp";
	reg = <0xe8000 0x1000>;
	};

	serdes: serdes@ea000 {
	compatible = "fsl,t4240-serdes";
	reg = <0xea000 0x4000>;
	};

	/include/ "elo3-dma-0.dtsi"
	/include/ "elo3-dma-1.dtsi"

	/include/ "qoriq-espi-0.dtsi"
	spi@110000 {
	fsl,espi-num-chipselects = <4>;
	};

	/include/ "qoriq-esdhc-0.dtsi"
	sdhc@114000 {
	compatible = "fsl,t4240-esdhc", "fsl,esdhc";
	sdhci,auto-cmd12;
	};
	/include/ "qoriq-i2c-0.dtsi"
	/include/ "qoriq-i2c-1.dtsi"
	/include/ "qoriq-duart-0.dtsi"
	/include/ "qoriq-duart-1.dtsi"
	/include/ "qoriq-gpio-0.dtsi"
	/include/ "qoriq-gpio-1.dtsi"
	/include/ "qoriq-gpio-2.dtsi"
	/include/ "qoriq-gpio-3.dtsi"
	/include/ "qoriq-usb2-mph-0.dtsi"
	usb0: usb@210000 {
	compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
	phy_type = "utmi";
	port0;
	};
	/include/ "qoriq-usb2-dr-0.dtsi"
	usb1: usb@211000 {
	compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
	dr_mode = "host";
	phy_type = "utmi";
	};
	/include/ "qoriq-sata2-0.dtsi"
	/include/ "qoriq-sata2-1.dtsi"
	/include/ "qoriq-sec5.0-0.dtsi"

	L2_1: l2-cache-controller@c20000 {
	compatible = "fsl,t4240-l2-cache-controller";
	reg = <0xc20000 0x40000>;
	next-level-cache = <&cpc>;
	};
	L2_2: l2-cache-controller@c60000 {
	compatible = "fsl,t4240-l2-cache-controller";
	reg = <0xc60000 0x40000>;
	next-level-cache = <&cpc>;
	};
	L2_3: l2-cache-controller@ca0000 {
	compatible = "fsl,t4240-l2-cache-controller";
	reg = <0xca0000 0x40000>;
	next-level-cache = <&cpc>;
	};
	};