arch/x86/kernel/cpu/mshyperv.c

/*
 * HyperV  Detection code.
 *
 * Copyright (C) 2010, Novell, Inc.
 * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 */

#include <linux/types.h>
#include <linux/time.h>
#include <linux/clocksource.h>
#include <linux/module.h>
#include <linux/hardirq.h>
#include <linux/efi.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/hypervisor.h>
#include <asm/hyperv.h>
#include <asm/mshyperv.h>
#include <asm/desc.h>
#include <asm/idle.h>
#include <asm/irq_regs.h>
#include <asm/i8259.h>
#include <asm/apic.h>
#include <asm/timer.h>

struct ms_hyperv_info ms_hyperv;
EXPORT_SYMBOL_GPL(ms_hyperv);

#if IS_ENABLED(CONFIG_HYPERV)
static void (*vmbus_handler)(void);

void hyperv_vector_handler(struct pt_regs *regs)
{
	struct pt_regs *old_regs = set_irq_regs(regs);

	irq_enter();
	exit_idle();

	inc_irq_stat(irq_hv_callback_count);
	if (vmbus_handler)
		vmbus_handler();

	irq_exit();
	set_irq_regs(old_regs);
}

void hv_setup_vmbus_irq(void (*handler)(void))
{
	vmbus_handler = handler;
	/*
	 * Setup the IDT for hypervisor callback. Prevent reallocation
	 * at module reload.
	 */
	if (!test_bit(HYPERVISOR_CALLBACK_VECTOR, used_vectors))
		alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR,
				hyperv_callback_vector);
}

void hv_remove_vmbus_irq(void)
{
	/* We have no way to deallocate the interrupt gate */
	vmbus_handler = NULL;
}
EXPORT_SYMBOL_GPL(hv_setup_vmbus_irq);
EXPORT_SYMBOL_GPL(hv_remove_vmbus_irq);
#endif

static uint32_t  __init ms_hyperv_platform(void)
{
	u32 eax;
	u32 hyp_signature[3];

	if (!boot_cpu_has(X86_FEATURE_HYPERVISOR))
		return 0;

	cpuid(HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS,
	      &eax, &hyp_signature[0], &hyp_signature[1], &hyp_signature[2]);

	if (eax >= HYPERV_CPUID_MIN &&
	    eax <= HYPERV_CPUID_MAX &&
	    !memcmp("Microsoft Hv", hyp_signature, 12))
		return HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS;

	return 0;
}

static cycle_t read_hv_clock(struct clocksource *arg)
{
	cycle_t current_tick;
	/*
	 * Read the partition counter to get the current tick count. This count
	 * is set to 0 when the partition is created and is incremented in
	 * 100 nanosecond units.
	 */
	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
	return current_tick;
}

static struct clocksource hyperv_cs = {
	.name		= "hyperv_clocksource",
	.rating		= 400, /* use this when running on Hyperv*/
	.read		= read_hv_clock,
	.mask		= CLOCKSOURCE_MASK(64),
};

static void __init ms_hyperv_init_platform(void)
{
	/*
	 * Extract the features and hints
	 */
	ms_hyperv.features = cpuid_eax(HYPERV_CPUID_FEATURES);
	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);

	printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
	       ms_hyperv.features, ms_hyperv.hints);

#ifdef CONFIG_X86_LOCAL_APIC
	if (ms_hyperv.features & HV_X64_MSR_APIC_FREQUENCY_AVAILABLE) {
		/*
		 * Get the APIC frequency.
		 */
		u64	hv_lapic_frequency;

		rdmsrl(HV_X64_MSR_APIC_FREQUENCY, hv_lapic_frequency);
		hv_lapic_frequency = div_u64(hv_lapic_frequency, HZ);
		lapic_timer_frequency = hv_lapic_frequency;
		printk(KERN_INFO "HyperV: LAPIC Timer Frequency: %#x\n",
				lapic_timer_frequency);

		/*
		 * On Hyper-V, when we are booting off an EFI firmware stack,
		 * we do not have many legacy devices including PIC, PIT etc.
		 */
		if (efi_enabled(EFI_BOOT)) {
			printk(KERN_INFO "HyperV: Using null_legacy_pic\n");
			legacy_pic = &null_legacy_pic;
		}
	}
#endif

	if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
		clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);

#ifdef CONFIG_X86_IO_APIC
	no_timer_check = 1;
#endif

}

const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
	.name			= "Microsoft HyperV",
	.detect			= ms_hyperv_platform,
	.init_platform		= ms_hyperv_init_platform,
};
EXPORT_SYMBOL(x86_hyper_ms_hyperv);