| /* |
| * Support for Celleb PCI-Express. |
| * |
| * (C) Copyright 2007-2008 TOSHIBA CORPORATION |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/iommu.h> |
| #include <asm/byteorder.h> |
| |
| #include "celleb_scc.h" |
| #include "celleb_pci.h" |
| |
| #define PEX_IN(base, off) in_be32((void __iomem *)(base) + (off)) |
| #define PEX_OUT(base, off, data) out_be32((void __iomem *)(base) + (off), (data)) |
| |
| static void scc_pciex_io_flush(struct iowa_bus *bus) |
| { |
| (void)PEX_IN(bus->phb->cfg_addr, PEXDMRDEN0); |
| } |
| |
| /* |
| * Memory space access to device on PCIEX |
| */ |
| #define PCIEX_MMIO_READ(name, ret) \ |
| static ret scc_pciex_##name(const PCI_IO_ADDR addr) \ |
| { \ |
| ret val = __do_##name(addr); \ |
| scc_pciex_io_flush(iowa_mem_find_bus(addr)); \ |
| return val; \ |
| } |
| |
| #define PCIEX_MMIO_READ_STR(name) \ |
| static void scc_pciex_##name(const PCI_IO_ADDR addr, void *buf, \ |
| unsigned long count) \ |
| { \ |
| __do_##name(addr, buf, count); \ |
| scc_pciex_io_flush(iowa_mem_find_bus(addr)); \ |
| } |
| |
| PCIEX_MMIO_READ(readb, u8) |
| PCIEX_MMIO_READ(readw, u16) |
| PCIEX_MMIO_READ(readl, u32) |
| PCIEX_MMIO_READ(readq, u64) |
| PCIEX_MMIO_READ(readw_be, u16) |
| PCIEX_MMIO_READ(readl_be, u32) |
| PCIEX_MMIO_READ(readq_be, u64) |
| PCIEX_MMIO_READ_STR(readsb) |
| PCIEX_MMIO_READ_STR(readsw) |
| PCIEX_MMIO_READ_STR(readsl) |
| |
| static void scc_pciex_memcpy_fromio(void *dest, const PCI_IO_ADDR src, |
| unsigned long n) |
| { |
| __do_memcpy_fromio(dest, src, n); |
| scc_pciex_io_flush(iowa_mem_find_bus(src)); |
| } |
| |
| /* |
| * I/O port access to devices on PCIEX. |
| */ |
| |
| static inline unsigned long get_bus_address(struct pci_controller *phb, |
| unsigned long port) |
| { |
| return port - ((unsigned long)(phb->io_base_virt) - _IO_BASE); |
| } |
| |
| static u32 scc_pciex_read_port(struct pci_controller *phb, |
| unsigned long port, int size) |
| { |
| unsigned int byte_enable; |
| unsigned int cmd, shift; |
| unsigned long addr; |
| u32 data, ret; |
| |
| BUG_ON(((port & 0x3ul) + size) > 4); |
| |
| addr = get_bus_address(phb, port); |
| shift = addr & 0x3ul; |
| byte_enable = ((1 << size) - 1) << shift; |
| cmd = PEXDCMND_IO_READ | (byte_enable << PEXDCMND_BYTE_EN_SHIFT); |
| PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul)); |
| PEX_OUT(phb->cfg_addr, PEXDCMND, cmd); |
| data = PEX_IN(phb->cfg_addr, PEXDRDATA); |
| ret = (data >> (shift * 8)) & (0xFFFFFFFF >> ((4 - size) * 8)); |
| |
| pr_debug("PCIEX:PIO READ:port=0x%lx, addr=0x%lx, size=%d, be=%x," |
| " cmd=%x, data=%x, ret=%x\n", port, addr, size, byte_enable, |
| cmd, data, ret); |
| |
| return ret; |
| } |
| |
| static void scc_pciex_write_port(struct pci_controller *phb, |
| unsigned long port, int size, u32 val) |
| { |
| unsigned int byte_enable; |
| unsigned int cmd, shift; |
| unsigned long addr; |
| u32 data; |
| |
| BUG_ON(((port & 0x3ul) + size) > 4); |
| |
| addr = get_bus_address(phb, port); |
| shift = addr & 0x3ul; |
| byte_enable = ((1 << size) - 1) << shift; |
| cmd = PEXDCMND_IO_WRITE | (byte_enable << PEXDCMND_BYTE_EN_SHIFT); |
| data = (val & (0xFFFFFFFF >> (4 - size) * 8)) << (shift * 8); |
| PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul)); |
| PEX_OUT(phb->cfg_addr, PEXDCMND, cmd); |
| PEX_OUT(phb->cfg_addr, PEXDWDATA, data); |
| |
| pr_debug("PCIEX:PIO WRITE:port=0x%lx, addr=%lx, size=%d, val=%x," |
| " be=%x, cmd=%x, data=%x\n", port, addr, size, val, |
| byte_enable, cmd, data); |
| } |
| |
| static u8 __scc_pciex_inb(struct pci_controller *phb, unsigned long port) |
| { |
| return (u8)scc_pciex_read_port(phb, port, 1); |
| } |
| |
| static u16 __scc_pciex_inw(struct pci_controller *phb, unsigned long port) |
| { |
| u32 data; |
| if ((port & 0x3ul) < 3) |
| data = scc_pciex_read_port(phb, port, 2); |
| else { |
| u32 d1 = scc_pciex_read_port(phb, port, 1); |
| u32 d2 = scc_pciex_read_port(phb, port + 1, 1); |
| data = d1 | (d2 << 8); |
| } |
| return (u16)data; |
| } |
| |
| static u32 __scc_pciex_inl(struct pci_controller *phb, unsigned long port) |
| { |
| unsigned int mod = port & 0x3ul; |
| u32 data; |
| if (mod == 0) |
| data = scc_pciex_read_port(phb, port, 4); |
| else { |
| u32 d1 = scc_pciex_read_port(phb, port, 4 - mod); |
| u32 d2 = scc_pciex_read_port(phb, port + 1, mod); |
| data = d1 | (d2 << (mod * 8)); |
| } |
| return data; |
| } |
| |
| static void __scc_pciex_outb(struct pci_controller *phb, |
| u8 val, unsigned long port) |
| { |
| scc_pciex_write_port(phb, port, 1, (u32)val); |
| } |
| |
| static void __scc_pciex_outw(struct pci_controller *phb, |
| u16 val, unsigned long port) |
| { |
| if ((port & 0x3ul) < 3) |
| scc_pciex_write_port(phb, port, 2, (u32)val); |
| else { |
| u32 d1 = val & 0x000000FF; |
| u32 d2 = (val & 0x0000FF00) >> 8; |
| scc_pciex_write_port(phb, port, 1, d1); |
| scc_pciex_write_port(phb, port + 1, 1, d2); |
| } |
| } |
| |
| static void __scc_pciex_outl(struct pci_controller *phb, |
| u32 val, unsigned long port) |
| { |
| unsigned int mod = port & 0x3ul; |
| if (mod == 0) |
| scc_pciex_write_port(phb, port, 4, val); |
| else { |
| u32 d1 = val & (0xFFFFFFFFul >> (mod * 8)); |
| u32 d2 = val >> ((4 - mod) * 8); |
| scc_pciex_write_port(phb, port, 4 - mod, d1); |
| scc_pciex_write_port(phb, port + 1, mod, d2); |
| } |
| } |
| |
| #define PCIEX_PIO_FUNC(size, name) \ |
| static u##size scc_pciex_in##name(unsigned long port) \ |
| { \ |
| struct iowa_bus *bus = iowa_pio_find_bus(port); \ |
| u##size data = __scc_pciex_in##name(bus->phb, port); \ |
| scc_pciex_io_flush(bus); \ |
| return data; \ |
| } \ |
| static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \ |
| { \ |
| struct iowa_bus *bus = iowa_pio_find_bus(p); \ |
| __le##size *dst = b; \ |
| for (; c != 0; c--, dst++) \ |
| *dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \ |
| scc_pciex_io_flush(bus); \ |
| } \ |
| static void scc_pciex_out##name(u##size val, unsigned long port) \ |
| { \ |
| struct iowa_bus *bus = iowa_pio_find_bus(port); \ |
| __scc_pciex_out##name(bus->phb, val, port); \ |
| } \ |
| static void scc_pciex_outs##name(unsigned long p, const void *b, \ |
| unsigned long c) \ |
| { \ |
| struct iowa_bus *bus = iowa_pio_find_bus(p); \ |
| const __le##size *src = b; \ |
| for (; c != 0; c--, src++) \ |
| __scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \ |
| } |
| #define __le8 u8 |
| #define cpu_to_le8(x) (x) |
| #define le8_to_cpu(x) (x) |
| PCIEX_PIO_FUNC(8, b) |
| PCIEX_PIO_FUNC(16, w) |
| PCIEX_PIO_FUNC(32, l) |
| |
| static struct ppc_pci_io scc_pciex_ops = { |
| .readb = scc_pciex_readb, |
| .readw = scc_pciex_readw, |
| .readl = scc_pciex_readl, |
| .readq = scc_pciex_readq, |
| .readw_be = scc_pciex_readw_be, |
| .readl_be = scc_pciex_readl_be, |
| .readq_be = scc_pciex_readq_be, |
| .readsb = scc_pciex_readsb, |
| .readsw = scc_pciex_readsw, |
| .readsl = scc_pciex_readsl, |
| .memcpy_fromio = scc_pciex_memcpy_fromio, |
| .inb = scc_pciex_inb, |
| .inw = scc_pciex_inw, |
| .inl = scc_pciex_inl, |
| .outb = scc_pciex_outb, |
| .outw = scc_pciex_outw, |
| .outl = scc_pciex_outl, |
| .insb = scc_pciex_insb, |
| .insw = scc_pciex_insw, |
| .insl = scc_pciex_insl, |
| .outsb = scc_pciex_outsb, |
| .outsw = scc_pciex_outsw, |
| .outsl = scc_pciex_outsl, |
| }; |
| |
| static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data) |
| { |
| dma_addr_t dummy_page_da; |
| void *dummy_page_va; |
| |
| dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!dummy_page_va) { |
| pr_err("PCIEX:Alloc dummy_page_va failed\n"); |
| return -1; |
| } |
| |
| dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va, |
| PAGE_SIZE, DMA_FROM_DEVICE); |
| if (dma_mapping_error(bus->phb->parent, dummy_page_da)) { |
| pr_err("PCIEX:Map dummy page failed.\n"); |
| kfree(dummy_page_va); |
| return -1; |
| } |
| |
| PEX_OUT(bus->phb->cfg_addr, PEXDMRDADR0, dummy_page_da); |
| |
| return 0; |
| } |
| |
| /* |
| * config space access |
| */ |
| #define MK_PEXDADRS(bus_no, dev_no, func_no, addr) \ |
| ((uint32_t)(((addr) & ~0x3UL) | \ |
| ((bus_no) << PEXDADRS_BUSNO_SHIFT) | \ |
| ((dev_no) << PEXDADRS_DEVNO_SHIFT) | \ |
| ((func_no) << PEXDADRS_FUNCNO_SHIFT))) |
| |
| #define MK_PEXDCMND_BYTE_EN(addr, size) \ |
| ((((0x1 << (size))-1) << ((addr) & 0x3)) << PEXDCMND_BYTE_EN_SHIFT) |
| #define MK_PEXDCMND(cmd, addr, size) ((cmd) | MK_PEXDCMND_BYTE_EN(addr, size)) |
| |
| static uint32_t config_read_pciex_dev(unsigned int __iomem *base, |
| uint64_t bus_no, uint64_t dev_no, uint64_t func_no, |
| uint64_t off, uint64_t size) |
| { |
| uint32_t ret; |
| uint32_t addr, cmd; |
| |
| addr = MK_PEXDADRS(bus_no, dev_no, func_no, off); |
| cmd = MK_PEXDCMND(PEXDCMND_CONFIG_READ, off, size); |
| PEX_OUT(base, PEXDADRS, addr); |
| PEX_OUT(base, PEXDCMND, cmd); |
| ret = (PEX_IN(base, PEXDRDATA) |
| >> ((off & (4-size)) * 8)) & ((0x1 << (size * 8)) - 1); |
| return ret; |
| } |
| |
| static void config_write_pciex_dev(unsigned int __iomem *base, uint64_t bus_no, |
| uint64_t dev_no, uint64_t func_no, uint64_t off, uint64_t size, |
| uint32_t data) |
| { |
| uint32_t addr, cmd; |
| |
| addr = MK_PEXDADRS(bus_no, dev_no, func_no, off); |
| cmd = MK_PEXDCMND(PEXDCMND_CONFIG_WRITE, off, size); |
| PEX_OUT(base, PEXDADRS, addr); |
| PEX_OUT(base, PEXDCMND, cmd); |
| PEX_OUT(base, PEXDWDATA, |
| (data & ((0x1 << (size * 8)) - 1)) << ((off & (4-size)) * 8)); |
| } |
| |
| #define MK_PEXCADRS_BYTE_EN(off, len) \ |
| ((((0x1 << (len)) - 1) << ((off) & 0x3)) << PEXCADRS_BYTE_EN_SHIFT) |
| #define MK_PEXCADRS(cmd, addr, size) \ |
| ((cmd) | MK_PEXCADRS_BYTE_EN(addr, size) | ((addr) & ~0x3)) |
| static uint32_t config_read_pciex_rc(unsigned int __iomem *base, |
| uint32_t where, uint32_t size) |
| { |
| PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_READ, where, size)); |
| return (PEX_IN(base, PEXCRDATA) |
| >> ((where & (4 - size)) * 8)) & ((0x1 << (size * 8)) - 1); |
| } |
| |
| static void config_write_pciex_rc(unsigned int __iomem *base, uint32_t where, |
| uint32_t size, uint32_t val) |
| { |
| uint32_t data; |
| |
| data = (val & ((0x1 << (size * 8)) - 1)) << ((where & (4 - size)) * 8); |
| PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_WRITE, where, size)); |
| PEX_OUT(base, PEXCWDATA, data); |
| } |
| |
| /* Interfaces */ |
| /* Note: Work-around |
| * On SCC PCIEXC, one device is seen on all 32 dev_no. |
| * As SCC PCIEXC can have only one device on the bus, we look only one dev_no. |
| * (dev_no = 1) |
| */ |
| static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, unsigned int *val) |
| { |
| struct pci_controller *phb = pci_bus_to_host(bus); |
| |
| if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) { |
| *val = ~0; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| if (bus->number == 0 && PCI_SLOT(devfn) == 0) |
| *val = config_read_pciex_rc(phb->cfg_addr, where, size); |
| else |
| *val = config_read_pciex_dev(phb->cfg_addr, bus->number, |
| PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int scc_pciex_write_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, unsigned int val) |
| { |
| struct pci_controller *phb = pci_bus_to_host(bus); |
| |
| if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (bus->number == 0 && PCI_SLOT(devfn) == 0) |
| config_write_pciex_rc(phb->cfg_addr, where, size, val); |
| else |
| config_write_pciex_dev(phb->cfg_addr, bus->number, |
| PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops scc_pciex_pci_ops = { |
| scc_pciex_read_config, |
| scc_pciex_write_config, |
| }; |
| |
| static void pciex_clear_intr_all(unsigned int __iomem *base) |
| { |
| PEX_OUT(base, PEXAERRSTS, 0xffffffff); |
| PEX_OUT(base, PEXPRERRSTS, 0xffffffff); |
| PEX_OUT(base, PEXINTSTS, 0xffffffff); |
| } |
| |
| #if 0 |
| static void pciex_disable_intr_all(unsigned int *base) |
| { |
| PEX_OUT(base, PEXINTMASK, 0x0); |
| PEX_OUT(base, PEXAERRMASK, 0x0); |
| PEX_OUT(base, PEXPRERRMASK, 0x0); |
| PEX_OUT(base, PEXVDMASK, 0x0); |
| } |
| #endif |
| |
| static void pciex_enable_intr_all(unsigned int __iomem *base) |
| { |
| PEX_OUT(base, PEXINTMASK, 0x0000e7f1); |
| PEX_OUT(base, PEXAERRMASK, 0x03ff01ff); |
| PEX_OUT(base, PEXPRERRMASK, 0x0001010f); |
| PEX_OUT(base, PEXVDMASK, 0x00000001); |
| } |
| |
| static void pciex_check_status(unsigned int __iomem *base) |
| { |
| uint32_t err = 0; |
| uint32_t intsts, aerr, prerr, rcvcp, lenerr; |
| uint32_t maea, maec; |
| |
| intsts = PEX_IN(base, PEXINTSTS); |
| aerr = PEX_IN(base, PEXAERRSTS); |
| prerr = PEX_IN(base, PEXPRERRSTS); |
| rcvcp = PEX_IN(base, PEXRCVCPLIDA); |
| lenerr = PEX_IN(base, PEXLENERRIDA); |
| |
| if (intsts || aerr || prerr || rcvcp || lenerr) |
| err = 1; |
| |
| pr_info("PCEXC interrupt!!\n"); |
| pr_info("PEXINTSTS :0x%08x\n", intsts); |
| pr_info("PEXAERRSTS :0x%08x\n", aerr); |
| pr_info("PEXPRERRSTS :0x%08x\n", prerr); |
| pr_info("PEXRCVCPLIDA :0x%08x\n", rcvcp); |
| pr_info("PEXLENERRIDA :0x%08x\n", lenerr); |
| |
| /* print detail of Protection Error */ |
| if (intsts & 0x00004000) { |
| uint32_t i, n; |
| for (i = 0; i < 4; i++) { |
| n = 1 << i; |
| if (prerr & n) { |
| maea = PEX_IN(base, PEXMAEA(i)); |
| maec = PEX_IN(base, PEXMAEC(i)); |
| pr_info("PEXMAEC%d :0x%08x\n", i, maec); |
| pr_info("PEXMAEA%d :0x%08x\n", i, maea); |
| } |
| } |
| } |
| |
| if (err) |
| pciex_clear_intr_all(base); |
| } |
| |
| static irqreturn_t pciex_handle_internal_irq(int irq, void *dev_id) |
| { |
| struct pci_controller *phb = dev_id; |
| |
| pr_debug("PCIEX:pciex_handle_internal_irq(irq=%d)\n", irq); |
| |
| BUG_ON(phb->cfg_addr == NULL); |
| |
| pciex_check_status(phb->cfg_addr); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static __init int celleb_setup_pciex(struct device_node *node, |
| struct pci_controller *phb) |
| { |
| struct resource r; |
| struct of_irq oirq; |
| int virq; |
| |
| /* SMMIO registers; used inside this file */ |
| if (of_address_to_resource(node, 0, &r)) { |
| pr_err("PCIEXC:Failed to get config resource.\n"); |
| return 1; |
| } |
| phb->cfg_addr = ioremap(r.start, r.end - r.start + 1); |
| if (!phb->cfg_addr) { |
| pr_err("PCIEXC:Failed to remap SMMIO region.\n"); |
| return 1; |
| } |
| |
| /* Not use cfg_data, cmd and data regs are near address reg */ |
| phb->cfg_data = NULL; |
| |
| /* set pci_ops */ |
| phb->ops = &scc_pciex_pci_ops; |
| |
| /* internal interrupt handler */ |
| if (of_irq_map_one(node, 1, &oirq)) { |
| pr_err("PCIEXC:Failed to map irq\n"); |
| goto error; |
| } |
| virq = irq_create_of_mapping(oirq.controller, oirq.specifier, |
| oirq.size); |
| if (request_irq(virq, pciex_handle_internal_irq, |
| IRQF_DISABLED, "pciex", (void *)phb)) { |
| pr_err("PCIEXC:Failed to request irq\n"); |
| goto error; |
| } |
| |
| /* enable all interrupts */ |
| pciex_clear_intr_all(phb->cfg_addr); |
| pciex_enable_intr_all(phb->cfg_addr); |
| /* MSI: TBD */ |
| |
| return 0; |
| |
| error: |
| phb->cfg_data = NULL; |
| if (phb->cfg_addr) |
| iounmap(phb->cfg_addr); |
| phb->cfg_addr = NULL; |
| return 1; |
| } |
| |
| struct celleb_phb_spec celleb_pciex_spec __initdata = { |
| .setup = celleb_setup_pciex, |
| .ops = &scc_pciex_ops, |
| .iowa_init = &scc_pciex_iowa_init, |
| }; |