| /* |
| * Suspend and hibernation support for x86-64 |
| * |
| * Distribute under GPLv2 |
| * |
| * Copyright (c) 2007 Rafael J. Wysocki <rjw@sisk.pl> |
| * Copyright (c) 2002 Pavel Machek <pavel@suse.cz> |
| * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org> |
| */ |
| |
| #include <linux/smp.h> |
| #include <linux/suspend.h> |
| #include <asm/proto.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/mtrr.h> |
| |
| /* References to section boundaries */ |
| extern const void __nosave_begin, __nosave_end; |
| |
| static void fix_processor_context(void); |
| |
| struct saved_context saved_context; |
| |
| /** |
| * __save_processor_state - save CPU registers before creating a |
| * hibernation image and before restoring the memory state from it |
| * @ctxt - structure to store the registers contents in |
| * |
| * NOTE: If there is a CPU register the modification of which by the |
| * boot kernel (ie. the kernel used for loading the hibernation image) |
| * might affect the operations of the restored target kernel (ie. the one |
| * saved in the hibernation image), then its contents must be saved by this |
| * function. In other words, if kernel A is hibernated and different |
| * kernel B is used for loading the hibernation image into memory, the |
| * kernel A's __save_processor_state() function must save all registers |
| * needed by kernel A, so that it can operate correctly after the resume |
| * regardless of what kernel B does in the meantime. |
| */ |
| static void __save_processor_state(struct saved_context *ctxt) |
| { |
| kernel_fpu_begin(); |
| |
| /* |
| * descriptor tables |
| */ |
| store_gdt((struct desc_ptr *)&ctxt->gdt_limit); |
| store_idt((struct desc_ptr *)&ctxt->idt_limit); |
| store_tr(ctxt->tr); |
| |
| /* XMM0..XMM15 should be handled by kernel_fpu_begin(). */ |
| /* |
| * segment registers |
| */ |
| asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds)); |
| asm volatile ("movw %%es, %0" : "=m" (ctxt->es)); |
| asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs)); |
| asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs)); |
| asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss)); |
| |
| rdmsrl(MSR_FS_BASE, ctxt->fs_base); |
| rdmsrl(MSR_GS_BASE, ctxt->gs_base); |
| rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); |
| mtrr_save_fixed_ranges(NULL); |
| |
| /* |
| * control registers |
| */ |
| rdmsrl(MSR_EFER, ctxt->efer); |
| ctxt->cr0 = read_cr0(); |
| ctxt->cr2 = read_cr2(); |
| ctxt->cr3 = read_cr3(); |
| ctxt->cr4 = read_cr4(); |
| ctxt->cr8 = read_cr8(); |
| } |
| |
| void save_processor_state(void) |
| { |
| __save_processor_state(&saved_context); |
| } |
| |
| static void do_fpu_end(void) |
| { |
| /* |
| * Restore FPU regs if necessary |
| */ |
| kernel_fpu_end(); |
| } |
| |
| /** |
| * __restore_processor_state - restore the contents of CPU registers saved |
| * by __save_processor_state() |
| * @ctxt - structure to load the registers contents from |
| */ |
| static void __restore_processor_state(struct saved_context *ctxt) |
| { |
| /* |
| * control registers |
| */ |
| wrmsrl(MSR_EFER, ctxt->efer); |
| write_cr8(ctxt->cr8); |
| write_cr4(ctxt->cr4); |
| write_cr3(ctxt->cr3); |
| write_cr2(ctxt->cr2); |
| write_cr0(ctxt->cr0); |
| |
| /* |
| * now restore the descriptor tables to their proper values |
| * ltr is done i fix_processor_context(). |
| */ |
| load_gdt((const struct desc_ptr *)&ctxt->gdt_limit); |
| load_idt((const struct desc_ptr *)&ctxt->idt_limit); |
| |
| |
| /* |
| * segment registers |
| */ |
| asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds)); |
| asm volatile ("movw %0, %%es" :: "r" (ctxt->es)); |
| asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs)); |
| load_gs_index(ctxt->gs); |
| asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss)); |
| |
| wrmsrl(MSR_FS_BASE, ctxt->fs_base); |
| wrmsrl(MSR_GS_BASE, ctxt->gs_base); |
| wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); |
| |
| fix_processor_context(); |
| |
| do_fpu_end(); |
| mtrr_ap_init(); |
| } |
| |
| void restore_processor_state(void) |
| { |
| __restore_processor_state(&saved_context); |
| } |
| |
| static void fix_processor_context(void) |
| { |
| int cpu = smp_processor_id(); |
| struct tss_struct *t = &per_cpu(init_tss, cpu); |
| |
| /* |
| * This just modifies memory; should not be necessary. But... This |
| * is necessary, because 386 hardware has concept of busy TSS or some |
| * similar stupidity. |
| */ |
| set_tss_desc(cpu, t); |
| |
| get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9; |
| |
| syscall_init(); /* This sets MSR_*STAR and related */ |
| load_TR_desc(); /* This does ltr */ |
| load_LDT(¤t->active_mm->context); /* This does lldt */ |
| |
| /* |
| * Now maybe reload the debug registers |
| */ |
| if (current->thread.debugreg7){ |
| loaddebug(¤t->thread, 0); |
| loaddebug(¤t->thread, 1); |
| loaddebug(¤t->thread, 2); |
| loaddebug(¤t->thread, 3); |
| /* no 4 and 5 */ |
| loaddebug(¤t->thread, 6); |
| loaddebug(¤t->thread, 7); |
| } |
| } |
| |
| #ifdef CONFIG_HIBERNATION |
| /* Defined in arch/x86_64/kernel/suspend_asm.S */ |
| extern int restore_image(void); |
| |
| /* |
| * Address to jump to in the last phase of restore in order to get to the image |
| * kernel's text (this value is passed in the image header). |
| */ |
| unsigned long restore_jump_address; |
| |
| /* |
| * Value of the cr3 register from before the hibernation (this value is passed |
| * in the image header). |
| */ |
| unsigned long restore_cr3; |
| |
| pgd_t *temp_level4_pgt; |
| |
| void *relocated_restore_code; |
| |
| static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end) |
| { |
| long i, j; |
| |
| i = pud_index(address); |
| pud = pud + i; |
| for (; i < PTRS_PER_PUD; pud++, i++) { |
| unsigned long paddr; |
| pmd_t *pmd; |
| |
| paddr = address + i*PUD_SIZE; |
| if (paddr >= end) |
| break; |
| |
| pmd = (pmd_t *)get_safe_page(GFP_ATOMIC); |
| if (!pmd) |
| return -ENOMEM; |
| set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE)); |
| for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) { |
| unsigned long pe; |
| |
| if (paddr >= end) |
| break; |
| pe = __PAGE_KERNEL_LARGE_EXEC | paddr; |
| pe &= __supported_pte_mask; |
| set_pmd(pmd, __pmd(pe)); |
| } |
| } |
| return 0; |
| } |
| |
| static int set_up_temporary_mappings(void) |
| { |
| unsigned long start, end, next; |
| int error; |
| |
| temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC); |
| if (!temp_level4_pgt) |
| return -ENOMEM; |
| |
| /* It is safe to reuse the original kernel mapping */ |
| set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), |
| init_level4_pgt[pgd_index(__START_KERNEL_map)]); |
| |
| /* Set up the direct mapping from scratch */ |
| start = (unsigned long)pfn_to_kaddr(0); |
| end = (unsigned long)pfn_to_kaddr(end_pfn); |
| |
| for (; start < end; start = next) { |
| pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC); |
| if (!pud) |
| return -ENOMEM; |
| next = start + PGDIR_SIZE; |
| if (next > end) |
| next = end; |
| if ((error = res_phys_pud_init(pud, __pa(start), __pa(next)))) |
| return error; |
| set_pgd(temp_level4_pgt + pgd_index(start), |
| mk_kernel_pgd(__pa(pud))); |
| } |
| return 0; |
| } |
| |
| int swsusp_arch_resume(void) |
| { |
| int error; |
| |
| /* We have got enough memory and from now on we cannot recover */ |
| if ((error = set_up_temporary_mappings())) |
| return error; |
| |
| relocated_restore_code = (void *)get_safe_page(GFP_ATOMIC); |
| if (!relocated_restore_code) |
| return -ENOMEM; |
| memcpy(relocated_restore_code, &core_restore_code, |
| &restore_registers - &core_restore_code); |
| |
| restore_image(); |
| return 0; |
| } |
| |
| /* |
| * pfn_is_nosave - check if given pfn is in the 'nosave' section |
| */ |
| |
| int pfn_is_nosave(unsigned long pfn) |
| { |
| unsigned long nosave_begin_pfn = __pa_symbol(&__nosave_begin) >> PAGE_SHIFT; |
| unsigned long nosave_end_pfn = PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT; |
| return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn); |
| } |
| |
| struct restore_data_record { |
| unsigned long jump_address; |
| unsigned long cr3; |
| unsigned long magic; |
| }; |
| |
| #define RESTORE_MAGIC 0x0123456789ABCDEFUL |
| |
| /** |
| * arch_hibernation_header_save - populate the architecture specific part |
| * of a hibernation image header |
| * @addr: address to save the data at |
| */ |
| int arch_hibernation_header_save(void *addr, unsigned int max_size) |
| { |
| struct restore_data_record *rdr = addr; |
| |
| if (max_size < sizeof(struct restore_data_record)) |
| return -EOVERFLOW; |
| rdr->jump_address = restore_jump_address; |
| rdr->cr3 = restore_cr3; |
| rdr->magic = RESTORE_MAGIC; |
| return 0; |
| } |
| |
| /** |
| * arch_hibernation_header_restore - read the architecture specific data |
| * from the hibernation image header |
| * @addr: address to read the data from |
| */ |
| int arch_hibernation_header_restore(void *addr) |
| { |
| struct restore_data_record *rdr = addr; |
| |
| restore_jump_address = rdr->jump_address; |
| restore_cr3 = rdr->cr3; |
| return (rdr->magic == RESTORE_MAGIC) ? 0 : -EINVAL; |
| } |
| #endif /* CONFIG_HIBERNATION */ |