| /* |
| * PowerPC version |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP |
| * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> |
| * Adapted for Power Macintosh by Paul Mackerras. |
| * Low-level exception handlers and MMU support |
| * rewritten by Paul Mackerras. |
| * Copyright (C) 1996 Paul Mackerras. |
| * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). |
| * |
| * This file contains the system call entry code, context switch |
| * code, and exception/interrupt return code for PowerPC. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/errno.h> |
| #include <asm/unistd.h> |
| #include <asm/processor.h> |
| #include <asm/page.h> |
| #include <asm/mmu.h> |
| #include <asm/thread_info.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/cputable.h> |
| #include <asm/firmware.h> |
| #include <asm/bug.h> |
| #include <asm/ptrace.h> |
| #include <asm/irqflags.h> |
| #include <asm/ftrace.h> |
| |
| /* |
| * System calls. |
| */ |
| .section ".toc","aw" |
| .SYS_CALL_TABLE: |
| .tc .sys_call_table[TC],.sys_call_table |
| |
| /* This value is used to mark exception frames on the stack. */ |
| exception_marker: |
| .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER |
| |
| .section ".text" |
| .align 7 |
| |
| #undef SHOW_SYSCALLS |
| |
| .globl system_call_common |
| system_call_common: |
| andi. r10,r12,MSR_PR |
| mr r10,r1 |
| addi r1,r1,-INT_FRAME_SIZE |
| beq- 1f |
| ld r1,PACAKSAVE(r13) |
| 1: std r10,0(r1) |
| std r11,_NIP(r1) |
| std r12,_MSR(r1) |
| std r0,GPR0(r1) |
| std r10,GPR1(r1) |
| ACCOUNT_CPU_USER_ENTRY(r10, r11) |
| /* |
| * This "crclr so" clears CR0.SO, which is the error indication on |
| * return from this system call. There must be no cmp instruction |
| * between it and the "mfcr r9" below, otherwise if XER.SO is set, |
| * CR0.SO will get set, causing all system calls to appear to fail. |
| */ |
| crclr so |
| std r2,GPR2(r1) |
| std r3,GPR3(r1) |
| std r4,GPR4(r1) |
| std r5,GPR5(r1) |
| std r6,GPR6(r1) |
| std r7,GPR7(r1) |
| std r8,GPR8(r1) |
| li r11,0 |
| std r11,GPR9(r1) |
| std r11,GPR10(r1) |
| std r11,GPR11(r1) |
| std r11,GPR12(r1) |
| std r9,GPR13(r1) |
| mfcr r9 |
| mflr r10 |
| li r11,0xc01 |
| std r9,_CCR(r1) |
| std r10,_LINK(r1) |
| std r11,_TRAP(r1) |
| mfxer r9 |
| mfctr r10 |
| std r9,_XER(r1) |
| std r10,_CTR(r1) |
| std r3,ORIG_GPR3(r1) |
| ld r2,PACATOC(r13) |
| addi r9,r1,STACK_FRAME_OVERHEAD |
| ld r11,exception_marker@toc(r2) |
| std r11,-16(r9) /* "regshere" marker */ |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| bl .trace_hardirqs_on |
| REST_GPR(0,r1) |
| REST_4GPRS(3,r1) |
| REST_2GPRS(7,r1) |
| addi r9,r1,STACK_FRAME_OVERHEAD |
| ld r12,_MSR(r1) |
| #endif /* CONFIG_TRACE_IRQFLAGS */ |
| li r10,1 |
| stb r10,PACASOFTIRQEN(r13) |
| stb r10,PACAHARDIRQEN(r13) |
| std r10,SOFTE(r1) |
| #ifdef CONFIG_PPC_ISERIES |
| BEGIN_FW_FTR_SECTION |
| /* Hack for handling interrupts when soft-enabling on iSeries */ |
| cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ |
| andi. r10,r12,MSR_PR /* from kernel */ |
| crand 4*cr0+eq,4*cr1+eq,4*cr0+eq |
| bne 2f |
| b hardware_interrupt_entry |
| 2: |
| END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) |
| #endif /* CONFIG_PPC_ISERIES */ |
| |
| /* Hard enable interrupts */ |
| #ifdef CONFIG_PPC_BOOK3E |
| wrteei 1 |
| #else |
| mfmsr r11 |
| ori r11,r11,MSR_EE |
| mtmsrd r11,1 |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| #ifdef SHOW_SYSCALLS |
| bl .do_show_syscall |
| REST_GPR(0,r1) |
| REST_4GPRS(3,r1) |
| REST_2GPRS(7,r1) |
| addi r9,r1,STACK_FRAME_OVERHEAD |
| #endif |
| clrrdi r11,r1,THREAD_SHIFT |
| ld r10,TI_FLAGS(r11) |
| andi. r11,r10,_TIF_SYSCALL_T_OR_A |
| bne- syscall_dotrace |
| syscall_dotrace_cont: |
| cmpldi 0,r0,NR_syscalls |
| bge- syscall_enosys |
| |
| system_call: /* label this so stack traces look sane */ |
| /* |
| * Need to vector to 32 Bit or default sys_call_table here, |
| * based on caller's run-mode / personality. |
| */ |
| ld r11,.SYS_CALL_TABLE@toc(2) |
| andi. r10,r10,_TIF_32BIT |
| beq 15f |
| addi r11,r11,8 /* use 32-bit syscall entries */ |
| clrldi r3,r3,32 |
| clrldi r4,r4,32 |
| clrldi r5,r5,32 |
| clrldi r6,r6,32 |
| clrldi r7,r7,32 |
| clrldi r8,r8,32 |
| 15: |
| slwi r0,r0,4 |
| ldx r10,r11,r0 /* Fetch system call handler [ptr] */ |
| mtctr r10 |
| bctrl /* Call handler */ |
| |
| syscall_exit: |
| std r3,RESULT(r1) |
| #ifdef SHOW_SYSCALLS |
| bl .do_show_syscall_exit |
| ld r3,RESULT(r1) |
| #endif |
| clrrdi r12,r1,THREAD_SHIFT |
| |
| ld r8,_MSR(r1) |
| #ifdef CONFIG_PPC_BOOK3S |
| /* No MSR:RI on BookE */ |
| andi. r10,r8,MSR_RI |
| beq- unrecov_restore |
| #endif |
| |
| /* Disable interrupts so current_thread_info()->flags can't change, |
| * and so that we don't get interrupted after loading SRR0/1. |
| */ |
| #ifdef CONFIG_PPC_BOOK3E |
| wrteei 0 |
| #else |
| mfmsr r10 |
| rldicl r10,r10,48,1 |
| rotldi r10,r10,16 |
| mtmsrd r10,1 |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| ld r9,TI_FLAGS(r12) |
| li r11,-_LAST_ERRNO |
| andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) |
| bne- syscall_exit_work |
| cmpld r3,r11 |
| ld r5,_CCR(r1) |
| bge- syscall_error |
| syscall_error_cont: |
| ld r7,_NIP(r1) |
| stdcx. r0,0,r1 /* to clear the reservation */ |
| andi. r6,r8,MSR_PR |
| ld r4,_LINK(r1) |
| /* |
| * Clear RI before restoring r13. If we are returning to |
| * userspace and we take an exception after restoring r13, |
| * we end up corrupting the userspace r13 value. |
| */ |
| #ifdef CONFIG_PPC_BOOK3S |
| /* No MSR:RI on BookE */ |
| li r12,MSR_RI |
| andc r11,r10,r12 |
| mtmsrd r11,1 /* clear MSR.RI */ |
| #endif /* CONFIG_PPC_BOOK3S */ |
| |
| beq- 1f |
| ACCOUNT_CPU_USER_EXIT(r11, r12) |
| ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ |
| 1: ld r2,GPR2(r1) |
| ld r1,GPR1(r1) |
| mtlr r4 |
| mtcr r5 |
| mtspr SPRN_SRR0,r7 |
| mtspr SPRN_SRR1,r8 |
| RFI |
| b . /* prevent speculative execution */ |
| |
| syscall_error: |
| oris r5,r5,0x1000 /* Set SO bit in CR */ |
| neg r3,r3 |
| std r5,_CCR(r1) |
| b syscall_error_cont |
| |
| /* Traced system call support */ |
| syscall_dotrace: |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .do_syscall_trace_enter |
| /* |
| * Restore argument registers possibly just changed. |
| * We use the return value of do_syscall_trace_enter |
| * for the call number to look up in the table (r0). |
| */ |
| mr r0,r3 |
| ld r3,GPR3(r1) |
| ld r4,GPR4(r1) |
| ld r5,GPR5(r1) |
| ld r6,GPR6(r1) |
| ld r7,GPR7(r1) |
| ld r8,GPR8(r1) |
| addi r9,r1,STACK_FRAME_OVERHEAD |
| clrrdi r10,r1,THREAD_SHIFT |
| ld r10,TI_FLAGS(r10) |
| b syscall_dotrace_cont |
| |
| syscall_enosys: |
| li r3,-ENOSYS |
| b syscall_exit |
| |
| syscall_exit_work: |
| /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr. |
| If TIF_NOERROR is set, just save r3 as it is. */ |
| |
| andi. r0,r9,_TIF_RESTOREALL |
| beq+ 0f |
| REST_NVGPRS(r1) |
| b 2f |
| 0: cmpld r3,r11 /* r10 is -LAST_ERRNO */ |
| blt+ 1f |
| andi. r0,r9,_TIF_NOERROR |
| bne- 1f |
| ld r5,_CCR(r1) |
| neg r3,r3 |
| oris r5,r5,0x1000 /* Set SO bit in CR */ |
| std r5,_CCR(r1) |
| 1: std r3,GPR3(r1) |
| 2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) |
| beq 4f |
| |
| /* Clear per-syscall TIF flags if any are set. */ |
| |
| li r11,_TIF_PERSYSCALL_MASK |
| addi r12,r12,TI_FLAGS |
| 3: ldarx r10,0,r12 |
| andc r10,r10,r11 |
| stdcx. r10,0,r12 |
| bne- 3b |
| subi r12,r12,TI_FLAGS |
| |
| 4: /* Anything else left to do? */ |
| andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) |
| beq .ret_from_except_lite |
| |
| /* Re-enable interrupts */ |
| #ifdef CONFIG_PPC_BOOK3E |
| wrteei 1 |
| #else |
| mfmsr r10 |
| ori r10,r10,MSR_EE |
| mtmsrd r10,1 |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .do_syscall_trace_leave |
| b .ret_from_except |
| |
| /* Save non-volatile GPRs, if not already saved. */ |
| _GLOBAL(save_nvgprs) |
| ld r11,_TRAP(r1) |
| andi. r0,r11,1 |
| beqlr- |
| SAVE_NVGPRS(r1) |
| clrrdi r0,r11,1 |
| std r0,_TRAP(r1) |
| blr |
| |
| |
| /* |
| * The sigsuspend and rt_sigsuspend system calls can call do_signal |
| * and thus put the process into the stopped state where we might |
| * want to examine its user state with ptrace. Therefore we need |
| * to save all the nonvolatile registers (r14 - r31) before calling |
| * the C code. Similarly, fork, vfork and clone need the full |
| * register state on the stack so that it can be copied to the child. |
| */ |
| |
| _GLOBAL(ppc_fork) |
| bl .save_nvgprs |
| bl .sys_fork |
| b syscall_exit |
| |
| _GLOBAL(ppc_vfork) |
| bl .save_nvgprs |
| bl .sys_vfork |
| b syscall_exit |
| |
| _GLOBAL(ppc_clone) |
| bl .save_nvgprs |
| bl .sys_clone |
| b syscall_exit |
| |
| _GLOBAL(ppc32_swapcontext) |
| bl .save_nvgprs |
| bl .compat_sys_swapcontext |
| b syscall_exit |
| |
| _GLOBAL(ppc64_swapcontext) |
| bl .save_nvgprs |
| bl .sys_swapcontext |
| b syscall_exit |
| |
| _GLOBAL(ret_from_fork) |
| bl .schedule_tail |
| REST_NVGPRS(r1) |
| li r3,0 |
| b syscall_exit |
| |
| /* |
| * This routine switches between two different tasks. The process |
| * state of one is saved on its kernel stack. Then the state |
| * of the other is restored from its kernel stack. The memory |
| * management hardware is updated to the second process's state. |
| * Finally, we can return to the second process, via ret_from_except. |
| * On entry, r3 points to the THREAD for the current task, r4 |
| * points to the THREAD for the new task. |
| * |
| * Note: there are two ways to get to the "going out" portion |
| * of this code; either by coming in via the entry (_switch) |
| * or via "fork" which must set up an environment equivalent |
| * to the "_switch" path. If you change this you'll have to change |
| * the fork code also. |
| * |
| * The code which creates the new task context is in 'copy_thread' |
| * in arch/powerpc/kernel/process.c |
| */ |
| .align 7 |
| _GLOBAL(_switch) |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-SWITCH_FRAME_SIZE(r1) |
| /* r3-r13 are caller saved -- Cort */ |
| SAVE_8GPRS(14, r1) |
| SAVE_10GPRS(22, r1) |
| mflr r20 /* Return to switch caller */ |
| mfmsr r22 |
| li r0, MSR_FP |
| #ifdef CONFIG_VSX |
| BEGIN_FTR_SECTION |
| oris r0,r0,MSR_VSX@h /* Disable VSX */ |
| END_FTR_SECTION_IFSET(CPU_FTR_VSX) |
| #endif /* CONFIG_VSX */ |
| #ifdef CONFIG_ALTIVEC |
| BEGIN_FTR_SECTION |
| oris r0,r0,MSR_VEC@h /* Disable altivec */ |
| mfspr r24,SPRN_VRSAVE /* save vrsave register value */ |
| std r24,THREAD_VRSAVE(r3) |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) |
| #endif /* CONFIG_ALTIVEC */ |
| and. r0,r0,r22 |
| beq+ 1f |
| andc r22,r22,r0 |
| MTMSRD(r22) |
| isync |
| 1: std r20,_NIP(r1) |
| mfcr r23 |
| std r23,_CCR(r1) |
| std r1,KSP(r3) /* Set old stack pointer */ |
| |
| #ifdef CONFIG_SMP |
| /* We need a sync somewhere here to make sure that if the |
| * previous task gets rescheduled on another CPU, it sees all |
| * stores it has performed on this one. |
| */ |
| sync |
| #endif /* CONFIG_SMP */ |
| |
| addi r6,r4,-THREAD /* Convert THREAD to 'current' */ |
| std r6,PACACURRENT(r13) /* Set new 'current' */ |
| |
| ld r8,KSP(r4) /* new stack pointer */ |
| #ifdef CONFIG_PPC_BOOK3S |
| BEGIN_FTR_SECTION |
| BEGIN_FTR_SECTION_NESTED(95) |
| clrrdi r6,r8,28 /* get its ESID */ |
| clrrdi r9,r1,28 /* get current sp ESID */ |
| FTR_SECTION_ELSE_NESTED(95) |
| clrrdi r6,r8,40 /* get its 1T ESID */ |
| clrrdi r9,r1,40 /* get current sp 1T ESID */ |
| ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95) |
| FTR_SECTION_ELSE |
| b 2f |
| ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB) |
| clrldi. r0,r6,2 /* is new ESID c00000000? */ |
| cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ |
| cror eq,4*cr1+eq,eq |
| beq 2f /* if yes, don't slbie it */ |
| |
| /* Bolt in the new stack SLB entry */ |
| ld r7,KSP_VSID(r4) /* Get new stack's VSID */ |
| oris r0,r6,(SLB_ESID_V)@h |
| ori r0,r0,(SLB_NUM_BOLTED-1)@l |
| BEGIN_FTR_SECTION |
| li r9,MMU_SEGSIZE_1T /* insert B field */ |
| oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h |
| rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0 |
| END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) |
| |
| /* Update the last bolted SLB. No write barriers are needed |
| * here, provided we only update the current CPU's SLB shadow |
| * buffer. |
| */ |
| ld r9,PACA_SLBSHADOWPTR(r13) |
| li r12,0 |
| std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */ |
| std r7,SLBSHADOW_STACKVSID(r9) /* Save VSID */ |
| std r0,SLBSHADOW_STACKESID(r9) /* Save ESID */ |
| |
| /* No need to check for CPU_FTR_NO_SLBIE_B here, since when |
| * we have 1TB segments, the only CPUs known to have the errata |
| * only support less than 1TB of system memory and we'll never |
| * actually hit this code path. |
| */ |
| |
| slbie r6 |
| slbie r6 /* Workaround POWER5 < DD2.1 issue */ |
| slbmte r7,r0 |
| isync |
| 2: |
| #endif /* !CONFIG_PPC_BOOK3S */ |
| |
| clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ |
| /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE |
| because we don't need to leave the 288-byte ABI gap at the |
| top of the kernel stack. */ |
| addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE |
| |
| mr r1,r8 /* start using new stack pointer */ |
| std r7,PACAKSAVE(r13) |
| |
| ld r6,_CCR(r1) |
| mtcrf 0xFF,r6 |
| |
| #ifdef CONFIG_ALTIVEC |
| BEGIN_FTR_SECTION |
| ld r0,THREAD_VRSAVE(r4) |
| mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) |
| #endif /* CONFIG_ALTIVEC */ |
| |
| /* r3-r13 are destroyed -- Cort */ |
| REST_8GPRS(14, r1) |
| REST_10GPRS(22, r1) |
| |
| /* convert old thread to its task_struct for return value */ |
| addi r3,r3,-THREAD |
| ld r7,_NIP(r1) /* Return to _switch caller in new task */ |
| mtlr r7 |
| addi r1,r1,SWITCH_FRAME_SIZE |
| blr |
| |
| .align 7 |
| _GLOBAL(ret_from_except) |
| ld r11,_TRAP(r1) |
| andi. r0,r11,1 |
| bne .ret_from_except_lite |
| REST_NVGPRS(r1) |
| |
| _GLOBAL(ret_from_except_lite) |
| /* |
| * Disable interrupts so that current_thread_info()->flags |
| * can't change between when we test it and when we return |
| * from the interrupt. |
| */ |
| #ifdef CONFIG_PPC_BOOK3E |
| wrteei 0 |
| #else |
| mfmsr r10 /* Get current interrupt state */ |
| rldicl r9,r10,48,1 /* clear MSR_EE */ |
| rotldi r9,r9,16 |
| mtmsrd r9,1 /* Update machine state */ |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| #ifdef CONFIG_PREEMPT |
| clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ |
| li r0,_TIF_NEED_RESCHED /* bits to check */ |
| ld r3,_MSR(r1) |
| ld r4,TI_FLAGS(r9) |
| /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ |
| rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING |
| and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ |
| bne do_work |
| |
| #else /* !CONFIG_PREEMPT */ |
| ld r3,_MSR(r1) /* Returning to user mode? */ |
| andi. r3,r3,MSR_PR |
| beq restore /* if not, just restore regs and return */ |
| |
| /* Check current_thread_info()->flags */ |
| clrrdi r9,r1,THREAD_SHIFT |
| ld r4,TI_FLAGS(r9) |
| andi. r0,r4,_TIF_USER_WORK_MASK |
| bne do_work |
| #endif |
| |
| restore: |
| BEGIN_FW_FTR_SECTION |
| ld r5,SOFTE(r1) |
| FW_FTR_SECTION_ELSE |
| b iseries_check_pending_irqs |
| ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) |
| 2: |
| TRACE_AND_RESTORE_IRQ(r5); |
| |
| #ifdef CONFIG_PERF_EVENTS |
| /* check paca->perf_event_pending if we're enabling ints */ |
| lbz r3,PACAPERFPEND(r13) |
| and. r3,r3,r5 |
| beq 27f |
| bl .perf_event_do_pending |
| 27: |
| #endif /* CONFIG_PERF_EVENTS */ |
| |
| /* extract EE bit and use it to restore paca->hard_enabled */ |
| ld r3,_MSR(r1) |
| rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ |
| stb r4,PACAHARDIRQEN(r13) |
| |
| #ifdef CONFIG_PPC_BOOK3E |
| b .exception_return_book3e |
| #else |
| ld r4,_CTR(r1) |
| ld r0,_LINK(r1) |
| mtctr r4 |
| mtlr r0 |
| ld r4,_XER(r1) |
| mtspr SPRN_XER,r4 |
| |
| REST_8GPRS(5, r1) |
| |
| andi. r0,r3,MSR_RI |
| beq- unrecov_restore |
| |
| stdcx. r0,0,r1 /* to clear the reservation */ |
| |
| /* |
| * Clear RI before restoring r13. If we are returning to |
| * userspace and we take an exception after restoring r13, |
| * we end up corrupting the userspace r13 value. |
| */ |
| mfmsr r4 |
| andc r4,r4,r0 /* r0 contains MSR_RI here */ |
| mtmsrd r4,1 |
| |
| /* |
| * r13 is our per cpu area, only restore it if we are returning to |
| * userspace |
| */ |
| andi. r0,r3,MSR_PR |
| beq 1f |
| ACCOUNT_CPU_USER_EXIT(r2, r4) |
| REST_GPR(13, r1) |
| 1: |
| mtspr SPRN_SRR1,r3 |
| |
| ld r2,_CCR(r1) |
| mtcrf 0xFF,r2 |
| ld r2,_NIP(r1) |
| mtspr SPRN_SRR0,r2 |
| |
| ld r0,GPR0(r1) |
| ld r2,GPR2(r1) |
| ld r3,GPR3(r1) |
| ld r4,GPR4(r1) |
| ld r1,GPR1(r1) |
| |
| rfid |
| b . /* prevent speculative execution */ |
| |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| iseries_check_pending_irqs: |
| #ifdef CONFIG_PPC_ISERIES |
| ld r5,SOFTE(r1) |
| cmpdi 0,r5,0 |
| beq 2b |
| /* Check for pending interrupts (iSeries) */ |
| ld r3,PACALPPACAPTR(r13) |
| ld r3,LPPACAANYINT(r3) |
| cmpdi r3,0 |
| beq+ 2b /* skip do_IRQ if no interrupts */ |
| |
| li r3,0 |
| stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| bl .trace_hardirqs_off |
| mfmsr r10 |
| #endif |
| ori r10,r10,MSR_EE |
| mtmsrd r10 /* hard-enable again */ |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .do_IRQ |
| b .ret_from_except_lite /* loop back and handle more */ |
| #endif |
| |
| do_work: |
| #ifdef CONFIG_PREEMPT |
| andi. r0,r3,MSR_PR /* Returning to user mode? */ |
| bne user_work |
| /* Check that preempt_count() == 0 and interrupts are enabled */ |
| lwz r8,TI_PREEMPT(r9) |
| cmpwi cr1,r8,0 |
| ld r0,SOFTE(r1) |
| cmpdi r0,0 |
| crandc eq,cr1*4+eq,eq |
| bne restore |
| /* here we are preempting the current task */ |
| 1: |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| bl .trace_hardirqs_on |
| /* Note: we just clobbered r10 which used to contain the previous |
| * MSR before the hard-disabling done by the caller of do_work. |
| * We don't have that value anymore, but it doesn't matter as |
| * we will hard-enable unconditionally, we can just reload the |
| * current MSR into r10 |
| */ |
| mfmsr r10 |
| #endif /* CONFIG_TRACE_IRQFLAGS */ |
| li r0,1 |
| stb r0,PACASOFTIRQEN(r13) |
| stb r0,PACAHARDIRQEN(r13) |
| #ifdef CONFIG_PPC_BOOK3E |
| wrteei 1 |
| bl .preempt_schedule |
| wrteei 0 |
| #else |
| ori r10,r10,MSR_EE |
| mtmsrd r10,1 /* reenable interrupts */ |
| bl .preempt_schedule |
| mfmsr r10 |
| clrrdi r9,r1,THREAD_SHIFT |
| rldicl r10,r10,48,1 /* disable interrupts again */ |
| rotldi r10,r10,16 |
| mtmsrd r10,1 |
| #endif /* CONFIG_PPC_BOOK3E */ |
| ld r4,TI_FLAGS(r9) |
| andi. r0,r4,_TIF_NEED_RESCHED |
| bne 1b |
| b restore |
| |
| user_work: |
| #endif |
| /* Enable interrupts */ |
| #ifdef CONFIG_PPC_BOOK3E |
| wrteei 1 |
| #else |
| ori r10,r10,MSR_EE |
| mtmsrd r10,1 |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| andi. r0,r4,_TIF_NEED_RESCHED |
| beq 1f |
| bl .schedule |
| b .ret_from_except_lite |
| |
| 1: bl .save_nvgprs |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .do_signal |
| b .ret_from_except |
| |
| unrecov_restore: |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl .unrecoverable_exception |
| b unrecov_restore |
| |
| #ifdef CONFIG_PPC_RTAS |
| /* |
| * On CHRP, the Run-Time Abstraction Services (RTAS) have to be |
| * called with the MMU off. |
| * |
| * In addition, we need to be in 32b mode, at least for now. |
| * |
| * Note: r3 is an input parameter to rtas, so don't trash it... |
| */ |
| _GLOBAL(enter_rtas) |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */ |
| |
| /* Because RTAS is running in 32b mode, it clobbers the high order half |
| * of all registers that it saves. We therefore save those registers |
| * RTAS might touch to the stack. (r0, r3-r13 are caller saved) |
| */ |
| SAVE_GPR(2, r1) /* Save the TOC */ |
| SAVE_GPR(13, r1) /* Save paca */ |
| SAVE_8GPRS(14, r1) /* Save the non-volatiles */ |
| SAVE_10GPRS(22, r1) /* ditto */ |
| |
| mfcr r4 |
| std r4,_CCR(r1) |
| mfctr r5 |
| std r5,_CTR(r1) |
| mfspr r6,SPRN_XER |
| std r6,_XER(r1) |
| mfdar r7 |
| std r7,_DAR(r1) |
| mfdsisr r8 |
| std r8,_DSISR(r1) |
| |
| /* Temporary workaround to clear CR until RTAS can be modified to |
| * ignore all bits. |
| */ |
| li r0,0 |
| mtcr r0 |
| |
| #ifdef CONFIG_BUG |
| /* There is no way it is acceptable to get here with interrupts enabled, |
| * check it with the asm equivalent of WARN_ON |
| */ |
| lbz r0,PACASOFTIRQEN(r13) |
| 1: tdnei r0,0 |
| EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING |
| #endif |
| |
| /* Hard-disable interrupts */ |
| mfmsr r6 |
| rldicl r7,r6,48,1 |
| rotldi r7,r7,16 |
| mtmsrd r7,1 |
| |
| /* Unfortunately, the stack pointer and the MSR are also clobbered, |
| * so they are saved in the PACA which allows us to restore |
| * our original state after RTAS returns. |
| */ |
| std r1,PACAR1(r13) |
| std r6,PACASAVEDMSR(r13) |
| |
| /* Setup our real return addr */ |
| LOAD_REG_ADDR(r4,.rtas_return_loc) |
| clrldi r4,r4,2 /* convert to realmode address */ |
| mtlr r4 |
| |
| li r0,0 |
| ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI |
| andc r0,r6,r0 |
| |
| li r9,1 |
| rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) |
| ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP |
| andc r6,r0,r9 |
| ori r6,r6,MSR_RI |
| sync /* disable interrupts so SRR0/1 */ |
| mtmsrd r0 /* don't get trashed */ |
| |
| LOAD_REG_ADDR(r4, rtas) |
| ld r5,RTASENTRY(r4) /* get the rtas->entry value */ |
| ld r4,RTASBASE(r4) /* get the rtas->base value */ |
| |
| mtspr SPRN_SRR0,r5 |
| mtspr SPRN_SRR1,r6 |
| rfid |
| b . /* prevent speculative execution */ |
| |
| _STATIC(rtas_return_loc) |
| /* relocation is off at this point */ |
| mfspr r4,SPRN_SPRG_PACA /* Get PACA */ |
| clrldi r4,r4,2 /* convert to realmode address */ |
| |
| bcl 20,31,$+4 |
| 0: mflr r3 |
| ld r3,(1f-0b)(r3) /* get &.rtas_restore_regs */ |
| |
| mfmsr r6 |
| li r0,MSR_RI |
| andc r6,r6,r0 |
| sync |
| mtmsrd r6 |
| |
| ld r1,PACAR1(r4) /* Restore our SP */ |
| ld r4,PACASAVEDMSR(r4) /* Restore our MSR */ |
| |
| mtspr SPRN_SRR0,r3 |
| mtspr SPRN_SRR1,r4 |
| rfid |
| b . /* prevent speculative execution */ |
| |
| .align 3 |
| 1: .llong .rtas_restore_regs |
| |
| _STATIC(rtas_restore_regs) |
| /* relocation is on at this point */ |
| REST_GPR(2, r1) /* Restore the TOC */ |
| REST_GPR(13, r1) /* Restore paca */ |
| REST_8GPRS(14, r1) /* Restore the non-volatiles */ |
| REST_10GPRS(22, r1) /* ditto */ |
| |
| mfspr r13,SPRN_SPRG_PACA |
| |
| ld r4,_CCR(r1) |
| mtcr r4 |
| ld r5,_CTR(r1) |
| mtctr r5 |
| ld r6,_XER(r1) |
| mtspr SPRN_XER,r6 |
| ld r7,_DAR(r1) |
| mtdar r7 |
| ld r8,_DSISR(r1) |
| mtdsisr r8 |
| |
| addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */ |
| ld r0,16(r1) /* get return address */ |
| |
| mtlr r0 |
| blr /* return to caller */ |
| |
| #endif /* CONFIG_PPC_RTAS */ |
| |
| _GLOBAL(enter_prom) |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ |
| |
| /* Because PROM is running in 32b mode, it clobbers the high order half |
| * of all registers that it saves. We therefore save those registers |
| * PROM might touch to the stack. (r0, r3-r13 are caller saved) |
| */ |
| SAVE_GPR(2, r1) |
| SAVE_GPR(13, r1) |
| SAVE_8GPRS(14, r1) |
| SAVE_10GPRS(22, r1) |
| mfcr r10 |
| mfmsr r11 |
| std r10,_CCR(r1) |
| std r11,_MSR(r1) |
| |
| /* Get the PROM entrypoint */ |
| mtlr r4 |
| |
| /* Switch MSR to 32 bits mode |
| */ |
| #ifdef CONFIG_PPC_BOOK3E |
| rlwinm r11,r11,0,1,31 |
| mtmsr r11 |
| #else /* CONFIG_PPC_BOOK3E */ |
| mfmsr r11 |
| li r12,1 |
| rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) |
| andc r11,r11,r12 |
| li r12,1 |
| rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) |
| andc r11,r11,r12 |
| mtmsrd r11 |
| #endif /* CONFIG_PPC_BOOK3E */ |
| isync |
| |
| /* Enter PROM here... */ |
| blrl |
| |
| /* Just make sure that r1 top 32 bits didn't get |
| * corrupt by OF |
| */ |
| rldicl r1,r1,0,32 |
| |
| /* Restore the MSR (back to 64 bits) */ |
| ld r0,_MSR(r1) |
| MTMSRD(r0) |
| isync |
| |
| /* Restore other registers */ |
| REST_GPR(2, r1) |
| REST_GPR(13, r1) |
| REST_8GPRS(14, r1) |
| REST_10GPRS(22, r1) |
| ld r4,_CCR(r1) |
| mtcr r4 |
| |
| addi r1,r1,PROM_FRAME_SIZE |
| ld r0,16(r1) |
| mtlr r0 |
| blr |
| |
| #ifdef CONFIG_FUNCTION_TRACER |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| _GLOBAL(mcount) |
| _GLOBAL(_mcount) |
| blr |
| |
| _GLOBAL(ftrace_caller) |
| /* Taken from output of objdump from lib64/glibc */ |
| mflr r3 |
| ld r11, 0(r1) |
| stdu r1, -112(r1) |
| std r3, 128(r1) |
| ld r4, 16(r11) |
| subi r3, r3, MCOUNT_INSN_SIZE |
| .globl ftrace_call |
| ftrace_call: |
| bl ftrace_stub |
| nop |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| .globl ftrace_graph_call |
| ftrace_graph_call: |
| b ftrace_graph_stub |
| _GLOBAL(ftrace_graph_stub) |
| #endif |
| ld r0, 128(r1) |
| mtlr r0 |
| addi r1, r1, 112 |
| _GLOBAL(ftrace_stub) |
| blr |
| #else |
| _GLOBAL(mcount) |
| blr |
| |
| _GLOBAL(_mcount) |
| /* Taken from output of objdump from lib64/glibc */ |
| mflr r3 |
| ld r11, 0(r1) |
| stdu r1, -112(r1) |
| std r3, 128(r1) |
| ld r4, 16(r11) |
| |
| subi r3, r3, MCOUNT_INSN_SIZE |
| LOAD_REG_ADDR(r5,ftrace_trace_function) |
| ld r5,0(r5) |
| ld r5,0(r5) |
| mtctr r5 |
| bctrl |
| nop |
| |
| |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| b ftrace_graph_caller |
| #endif |
| ld r0, 128(r1) |
| mtlr r0 |
| addi r1, r1, 112 |
| _GLOBAL(ftrace_stub) |
| blr |
| |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| _GLOBAL(ftrace_graph_caller) |
| /* load r4 with local address */ |
| ld r4, 128(r1) |
| subi r4, r4, MCOUNT_INSN_SIZE |
| |
| /* get the parent address */ |
| ld r11, 112(r1) |
| addi r3, r11, 16 |
| |
| bl .prepare_ftrace_return |
| nop |
| |
| ld r0, 128(r1) |
| mtlr r0 |
| addi r1, r1, 112 |
| blr |
| |
| _GLOBAL(return_to_handler) |
| /* need to save return values */ |
| std r4, -24(r1) |
| std r3, -16(r1) |
| std r31, -8(r1) |
| mr r31, r1 |
| stdu r1, -112(r1) |
| |
| bl .ftrace_return_to_handler |
| nop |
| |
| /* return value has real return address */ |
| mtlr r3 |
| |
| ld r1, 0(r1) |
| ld r4, -24(r1) |
| ld r3, -16(r1) |
| ld r31, -8(r1) |
| |
| /* Jump back to real return address */ |
| blr |
| |
| _GLOBAL(mod_return_to_handler) |
| /* need to save return values */ |
| std r4, -32(r1) |
| std r3, -24(r1) |
| /* save TOC */ |
| std r2, -16(r1) |
| std r31, -8(r1) |
| mr r31, r1 |
| stdu r1, -112(r1) |
| |
| /* |
| * We are in a module using the module's TOC. |
| * Switch to our TOC to run inside the core kernel. |
| */ |
| ld r2, PACATOC(r13) |
| |
| bl .ftrace_return_to_handler |
| nop |
| |
| /* return value has real return address */ |
| mtlr r3 |
| |
| ld r1, 0(r1) |
| ld r4, -32(r1) |
| ld r3, -24(r1) |
| ld r2, -16(r1) |
| ld r31, -8(r1) |
| |
| /* Jump back to real return address */ |
| blr |
| #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ |
| #endif /* CONFIG_FUNCTION_TRACER */ |
