| /* |
| * linux/drivers/mtd/onenand/omap-onenand.c |
| * |
| * Copyright (c) 2005 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * |
| * Derived from linux/drivers/mtd/nand/omap-nand-flash.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Overview: |
| * This is a device driver for the OneNAND flash device for TI OMAP boards. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <asm/io.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/tc.h> |
| #include <asm/sizes.h> |
| |
| #define OMAP_ONENAND_FLASH_START1 OMAP_CS2A_PHYS |
| #define OMAP_ONENAND_FLASH_START2 OMAP_CS0_PHYS |
| /* |
| * MTD structure for OMAP board |
| */ |
| static struct mtd_info *omap_onenand_mtd = NULL; |
| |
| /* |
| * Define partitions for flash devices |
| */ |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| static struct mtd_partition static_partition[] = { |
| { |
| .name = "X-Loader + U-Boot", |
| .offset = 0, |
| .size = SZ_128K, |
| .mask_flags = MTD_WRITEABLE /* force read-only */ |
| }, |
| { |
| .name = "U-Boot Environment", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_128K, |
| .mask_flags = MTD_WRITEABLE /* force read-only */ |
| }, |
| { |
| .name = "kernel", |
| .offset = MTDPART_OFS_APPEND, |
| .size = 2 * SZ_1M |
| }, |
| { |
| .name = "filesystem0", |
| .offset = MTDPART_OFS_APPEND, |
| .size = SZ_16M, |
| }, |
| { |
| .name = "filesystem1", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| const char *part_probes[] = { "cmdlinepart", NULL, }; |
| |
| #endif |
| |
| /* Scan to find existance of the device at base. |
| This also allocates oob and data internal buffers */ |
| static char onenand_name[] = "onenand"; |
| |
| /* |
| * Main initialization routine |
| */ |
| static int __init omap_onenand_init (void) |
| { |
| struct onenand_chip *this; |
| struct mtd_partition *dynamic_partition = 0; |
| int err = 0; |
| |
| /* Allocate memory for MTD device structure and private data */ |
| omap_onenand_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct onenand_chip), |
| GFP_KERNEL); |
| if (!omap_onenand_mtd) { |
| printk (KERN_WARNING "Unable to allocate OneNAND MTD device structure.\n"); |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| /* Get pointer to private data */ |
| this = (struct onenand_chip *) (&omap_onenand_mtd[1]); |
| |
| /* Initialize structures */ |
| memset((char *) omap_onenand_mtd, 0, sizeof(struct mtd_info) + sizeof(struct onenand_chip)); |
| |
| /* Link the private data with the MTD structure */ |
| omap_onenand_mtd->priv = this; |
| |
| /* try the first address */ |
| this->base = ioremap(OMAP_ONENAND_FLASH_START1, SZ_128K); |
| omap_onenand_mtd->name = onenand_name; |
| if (onenand_scan(omap_onenand_mtd, 1)){ |
| /* try the second address */ |
| iounmap(this->base); |
| this->base = ioremap(OMAP_ONENAND_FLASH_START2, SZ_128K); |
| if (onenand_scan(omap_onenand_mtd, 1)) { |
| iounmap(this->base); |
| err = -ENXIO; |
| goto out_mtd; |
| } |
| } |
| |
| /* Register the partitions */ |
| switch (omap_onenand_mtd->size) { |
| case SZ_128M: |
| case SZ_64M: |
| case SZ_32M: |
| #ifdef CONFIG_MTD_PARTITIONS |
| err = parse_mtd_partitions(omap_onenand_mtd, part_probes, |
| &dynamic_partition, 0); |
| if (err > 0) |
| err = add_mtd_partitions(omap_onenand_mtd, |
| dynamic_partition, err); |
| else if (1) |
| err = add_mtd_partitions(omap_onenand_mtd, |
| static_partition, |
| ARRAY_SIZE(static_partition)); |
| else |
| #endif |
| err = add_mtd_device(omap_onenand_mtd); |
| if (err) |
| goto out_buf; |
| break; |
| |
| default: |
| printk(KERN_WARNING "Unsupported OneNAND device\n"); |
| err = -ENXIO; |
| goto out_buf; |
| } |
| |
| return 0; |
| |
| out_buf: |
| onenand_release(omap_onenand_mtd); |
| iounmap(this->base); |
| out_mtd: |
| kfree(omap_onenand_mtd); |
| out: |
| return err; |
| } |
| |
| /* |
| * Clean up routine |
| */ |
| static void __exit omap_onenand_cleanup (void) |
| { |
| struct onenand_chip *this = omap_onenand_mtd->priv; |
| |
| /* onenand_release frees MTD partitions, MTD structure |
| and onenand internal buffers */ |
| onenand_release(omap_onenand_mtd); |
| iounmap(this->base); |
| kfree(omap_onenand_mtd); |
| } |
| |
| module_init(omap_onenand_init); |
| module_exit(omap_onenand_cleanup); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>"); |
| MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP boards"); |