| /* |
| * $Id: mtd_blkdevs.c,v 1.26 2005/07/29 19:42:04 tpoynor Exp $ |
| * |
| * (C) 2003 David Woodhouse <dwmw2@infradead.org> |
| * |
| * Interface to Linux 2.5 block layer for MTD 'translation layers'. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/list.h> |
| #include <linux/fs.h> |
| #include <linux/mtd/blktrans.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/blkdev.h> |
| #include <linux/blkpg.h> |
| #include <linux/spinlock.h> |
| #include <linux/hdreg.h> |
| #include <linux/init.h> |
| #include <asm/semaphore.h> |
| #include <asm/uaccess.h> |
| |
| static LIST_HEAD(blktrans_majors); |
| |
| extern struct semaphore mtd_table_mutex; |
| extern struct mtd_info *mtd_table[]; |
| |
| struct mtd_blkcore_priv { |
| struct completion thread_dead; |
| int exiting; |
| wait_queue_head_t thread_wq; |
| struct request_queue *rq; |
| spinlock_t queue_lock; |
| }; |
| |
| static int do_blktrans_request(struct mtd_blktrans_ops *tr, |
| struct mtd_blktrans_dev *dev, |
| struct request *req) |
| { |
| unsigned long block, nsect; |
| char *buf; |
| |
| block = req->sector; |
| nsect = req->current_nr_sectors; |
| buf = req->buffer; |
| |
| if (!(req->flags & REQ_CMD)) |
| return 0; |
| |
| if (block + nsect > get_capacity(req->rq_disk)) |
| return 0; |
| |
| switch(rq_data_dir(req)) { |
| case READ: |
| for (; nsect > 0; nsect--, block++, buf += 512) |
| if (tr->readsect(dev, block, buf)) |
| return 0; |
| return 1; |
| |
| case WRITE: |
| if (!tr->writesect) |
| return 0; |
| |
| for (; nsect > 0; nsect--, block++, buf += 512) |
| if (tr->writesect(dev, block, buf)) |
| return 0; |
| return 1; |
| |
| default: |
| printk(KERN_NOTICE "Unknown request %ld\n", rq_data_dir(req)); |
| return 0; |
| } |
| } |
| |
| static int mtd_blktrans_thread(void *arg) |
| { |
| struct mtd_blktrans_ops *tr = arg; |
| struct request_queue *rq = tr->blkcore_priv->rq; |
| |
| /* we might get involved when memory gets low, so use PF_MEMALLOC */ |
| current->flags |= PF_MEMALLOC | PF_NOFREEZE; |
| |
| daemonize("%sd", tr->name); |
| |
| /* daemonize() doesn't do this for us since some kernel threads |
| actually want to deal with signals. We can't just call |
| exit_sighand() since that'll cause an oops when we finally |
| do exit. */ |
| spin_lock_irq(¤t->sighand->siglock); |
| sigfillset(¤t->blocked); |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| |
| spin_lock_irq(rq->queue_lock); |
| |
| while (!tr->blkcore_priv->exiting) { |
| struct request *req; |
| struct mtd_blktrans_dev *dev; |
| int res = 0; |
| DECLARE_WAITQUEUE(wait, current); |
| |
| req = elv_next_request(rq); |
| |
| if (!req) { |
| add_wait_queue(&tr->blkcore_priv->thread_wq, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_unlock_irq(rq->queue_lock); |
| |
| schedule(); |
| remove_wait_queue(&tr->blkcore_priv->thread_wq, &wait); |
| |
| spin_lock_irq(rq->queue_lock); |
| |
| continue; |
| } |
| |
| dev = req->rq_disk->private_data; |
| tr = dev->tr; |
| |
| spin_unlock_irq(rq->queue_lock); |
| |
| down(&dev->sem); |
| res = do_blktrans_request(tr, dev, req); |
| up(&dev->sem); |
| |
| spin_lock_irq(rq->queue_lock); |
| |
| end_request(req, res); |
| } |
| spin_unlock_irq(rq->queue_lock); |
| |
| complete_and_exit(&tr->blkcore_priv->thread_dead, 0); |
| } |
| |
| static void mtd_blktrans_request(struct request_queue *rq) |
| { |
| struct mtd_blktrans_ops *tr = rq->queuedata; |
| wake_up(&tr->blkcore_priv->thread_wq); |
| } |
| |
| |
| static int blktrans_open(struct inode *i, struct file *f) |
| { |
| struct mtd_blktrans_dev *dev; |
| struct mtd_blktrans_ops *tr; |
| int ret = -ENODEV; |
| |
| dev = i->i_bdev->bd_disk->private_data; |
| tr = dev->tr; |
| |
| if (!try_module_get(dev->mtd->owner)) |
| goto out; |
| |
| if (!try_module_get(tr->owner)) |
| goto out_tr; |
| |
| /* FIXME: Locking. A hot pluggable device can go away |
| (del_mtd_device can be called for it) without its module |
| being unloaded. */ |
| dev->mtd->usecount++; |
| |
| ret = 0; |
| if (tr->open && (ret = tr->open(dev))) { |
| dev->mtd->usecount--; |
| module_put(dev->mtd->owner); |
| out_tr: |
| module_put(tr->owner); |
| } |
| out: |
| return ret; |
| } |
| |
| static int blktrans_release(struct inode *i, struct file *f) |
| { |
| struct mtd_blktrans_dev *dev; |
| struct mtd_blktrans_ops *tr; |
| int ret = 0; |
| |
| dev = i->i_bdev->bd_disk->private_data; |
| tr = dev->tr; |
| |
| if (tr->release) |
| ret = tr->release(dev); |
| |
| if (!ret) { |
| dev->mtd->usecount--; |
| module_put(dev->mtd->owner); |
| module_put(tr->owner); |
| } |
| |
| return ret; |
| } |
| |
| |
| static int blktrans_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct mtd_blktrans_dev *dev = inode->i_bdev->bd_disk->private_data; |
| struct mtd_blktrans_ops *tr = dev->tr; |
| |
| switch (cmd) { |
| case BLKFLSBUF: |
| if (tr->flush) |
| return tr->flush(dev); |
| /* The core code did the work, we had nothing to do. */ |
| return 0; |
| |
| case HDIO_GETGEO: |
| if (tr->getgeo) { |
| struct hd_geometry g; |
| int ret; |
| |
| memset(&g, 0, sizeof(g)); |
| ret = tr->getgeo(dev, &g); |
| if (ret) |
| return ret; |
| |
| g.start = get_start_sect(inode->i_bdev); |
| if (copy_to_user((void __user *)arg, &g, sizeof(g))) |
| return -EFAULT; |
| return 0; |
| } /* else */ |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| struct block_device_operations mtd_blktrans_ops = { |
| .owner = THIS_MODULE, |
| .open = blktrans_open, |
| .release = blktrans_release, |
| .ioctl = blktrans_ioctl, |
| }; |
| |
| int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) |
| { |
| struct mtd_blktrans_ops *tr = new->tr; |
| struct list_head *this; |
| int last_devnum = -1; |
| struct gendisk *gd; |
| |
| if (!down_trylock(&mtd_table_mutex)) { |
| up(&mtd_table_mutex); |
| BUG(); |
| } |
| |
| list_for_each(this, &tr->devs) { |
| struct mtd_blktrans_dev *d = list_entry(this, struct mtd_blktrans_dev, list); |
| if (new->devnum == -1) { |
| /* Use first free number */ |
| if (d->devnum != last_devnum+1) { |
| /* Found a free devnum. Plug it in here */ |
| new->devnum = last_devnum+1; |
| list_add_tail(&new->list, &d->list); |
| goto added; |
| } |
| } else if (d->devnum == new->devnum) { |
| /* Required number taken */ |
| return -EBUSY; |
| } else if (d->devnum > new->devnum) { |
| /* Required number was free */ |
| list_add_tail(&new->list, &d->list); |
| goto added; |
| } |
| last_devnum = d->devnum; |
| } |
| if (new->devnum == -1) |
| new->devnum = last_devnum+1; |
| |
| if ((new->devnum << tr->part_bits) > 256) { |
| return -EBUSY; |
| } |
| |
| init_MUTEX(&new->sem); |
| list_add_tail(&new->list, &tr->devs); |
| added: |
| if (!tr->writesect) |
| new->readonly = 1; |
| |
| gd = alloc_disk(1 << tr->part_bits); |
| if (!gd) { |
| list_del(&new->list); |
| return -ENOMEM; |
| } |
| gd->major = tr->major; |
| gd->first_minor = (new->devnum) << tr->part_bits; |
| gd->fops = &mtd_blktrans_ops; |
| |
| if (tr->part_bits) |
| if (new->devnum < 26) |
| snprintf(gd->disk_name, sizeof(gd->disk_name), |
| "%s%c", tr->name, 'a' + new->devnum); |
| else |
| snprintf(gd->disk_name, sizeof(gd->disk_name), |
| "%s%c%c", tr->name, |
| 'a' - 1 + new->devnum / 26, |
| 'a' + new->devnum % 26); |
| else |
| snprintf(gd->disk_name, sizeof(gd->disk_name), |
| "%s%d", tr->name, new->devnum); |
| |
| /* 2.5 has capacity in units of 512 bytes while still |
| having BLOCK_SIZE_BITS set to 10. Just to keep us amused. */ |
| set_capacity(gd, (new->size * new->blksize) >> 9); |
| |
| gd->private_data = new; |
| new->blkcore_priv = gd; |
| gd->queue = tr->blkcore_priv->rq; |
| |
| if (new->readonly) |
| set_disk_ro(gd, 1); |
| |
| add_disk(gd); |
| |
| return 0; |
| } |
| |
| int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old) |
| { |
| if (!down_trylock(&mtd_table_mutex)) { |
| up(&mtd_table_mutex); |
| BUG(); |
| } |
| |
| list_del(&old->list); |
| |
| del_gendisk(old->blkcore_priv); |
| put_disk(old->blkcore_priv); |
| |
| return 0; |
| } |
| |
| static void blktrans_notify_remove(struct mtd_info *mtd) |
| { |
| struct list_head *this, *this2, *next; |
| |
| list_for_each(this, &blktrans_majors) { |
| struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list); |
| |
| list_for_each_safe(this2, next, &tr->devs) { |
| struct mtd_blktrans_dev *dev = list_entry(this2, struct mtd_blktrans_dev, list); |
| |
| if (dev->mtd == mtd) |
| tr->remove_dev(dev); |
| } |
| } |
| } |
| |
| static void blktrans_notify_add(struct mtd_info *mtd) |
| { |
| struct list_head *this; |
| |
| if (mtd->type == MTD_ABSENT) |
| return; |
| |
| list_for_each(this, &blktrans_majors) { |
| struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list); |
| |
| tr->add_mtd(tr, mtd); |
| } |
| |
| } |
| |
| static struct mtd_notifier blktrans_notifier = { |
| .add = blktrans_notify_add, |
| .remove = blktrans_notify_remove, |
| }; |
| |
| int register_mtd_blktrans(struct mtd_blktrans_ops *tr) |
| { |
| int ret, i; |
| |
| /* Register the notifier if/when the first device type is |
| registered, to prevent the link/init ordering from fucking |
| us over. */ |
| if (!blktrans_notifier.list.next) |
| register_mtd_user(&blktrans_notifier); |
| |
| tr->blkcore_priv = kmalloc(sizeof(*tr->blkcore_priv), GFP_KERNEL); |
| if (!tr->blkcore_priv) |
| return -ENOMEM; |
| |
| memset(tr->blkcore_priv, 0, sizeof(*tr->blkcore_priv)); |
| |
| down(&mtd_table_mutex); |
| |
| ret = register_blkdev(tr->major, tr->name); |
| if (ret) { |
| printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n", |
| tr->name, tr->major, ret); |
| kfree(tr->blkcore_priv); |
| up(&mtd_table_mutex); |
| return ret; |
| } |
| spin_lock_init(&tr->blkcore_priv->queue_lock); |
| init_completion(&tr->blkcore_priv->thread_dead); |
| init_waitqueue_head(&tr->blkcore_priv->thread_wq); |
| |
| tr->blkcore_priv->rq = blk_init_queue(mtd_blktrans_request, &tr->blkcore_priv->queue_lock); |
| if (!tr->blkcore_priv->rq) { |
| unregister_blkdev(tr->major, tr->name); |
| kfree(tr->blkcore_priv); |
| up(&mtd_table_mutex); |
| return -ENOMEM; |
| } |
| |
| tr->blkcore_priv->rq->queuedata = tr; |
| |
| ret = kernel_thread(mtd_blktrans_thread, tr, CLONE_KERNEL); |
| if (ret < 0) { |
| blk_cleanup_queue(tr->blkcore_priv->rq); |
| unregister_blkdev(tr->major, tr->name); |
| kfree(tr->blkcore_priv); |
| up(&mtd_table_mutex); |
| return ret; |
| } |
| |
| INIT_LIST_HEAD(&tr->devs); |
| list_add(&tr->list, &blktrans_majors); |
| |
| for (i=0; i<MAX_MTD_DEVICES; i++) { |
| if (mtd_table[i] && mtd_table[i]->type != MTD_ABSENT) |
| tr->add_mtd(tr, mtd_table[i]); |
| } |
| |
| up(&mtd_table_mutex); |
| |
| return 0; |
| } |
| |
| int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr) |
| { |
| struct list_head *this, *next; |
| |
| down(&mtd_table_mutex); |
| |
| /* Clean up the kernel thread */ |
| tr->blkcore_priv->exiting = 1; |
| wake_up(&tr->blkcore_priv->thread_wq); |
| wait_for_completion(&tr->blkcore_priv->thread_dead); |
| |
| /* Remove it from the list of active majors */ |
| list_del(&tr->list); |
| |
| list_for_each_safe(this, next, &tr->devs) { |
| struct mtd_blktrans_dev *dev = list_entry(this, struct mtd_blktrans_dev, list); |
| tr->remove_dev(dev); |
| } |
| |
| blk_cleanup_queue(tr->blkcore_priv->rq); |
| unregister_blkdev(tr->major, tr->name); |
| |
| up(&mtd_table_mutex); |
| |
| kfree(tr->blkcore_priv); |
| |
| if (!list_empty(&tr->devs)) |
| BUG(); |
| return 0; |
| } |
| |
| static void __exit mtd_blktrans_exit(void) |
| { |
| /* No race here -- if someone's currently in register_mtd_blktrans |
| we're screwed anyway. */ |
| if (blktrans_notifier.list.next) |
| unregister_mtd_user(&blktrans_notifier); |
| } |
| |
| module_exit(mtd_blktrans_exit); |
| |
| EXPORT_SYMBOL_GPL(register_mtd_blktrans); |
| EXPORT_SYMBOL_GPL(deregister_mtd_blktrans); |
| EXPORT_SYMBOL_GPL(add_mtd_blktrans_dev); |
| EXPORT_SYMBOL_GPL(del_mtd_blktrans_dev); |
| |
| MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Common interface to block layer for MTD 'translation layers'"); |