| /* ********************************************************************* |
| * BCM1280/BCM1400 Board Support Package |
| * |
| * SCD Constants and Macros File: bcm1480_scd.h |
| * |
| * This module contains constants and macros useful for |
| * manipulating the System Control and Debug module. |
| * |
| * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03) |
| * |
| ********************************************************************* |
| * |
| * Copyright 2000,2001,2002,2003 |
| * Broadcom Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| ********************************************************************* */ |
| |
| #ifndef _BCM1480_SCD_H |
| #define _BCM1480_SCD_H |
| |
| #include "sb1250_defs.h" |
| |
| /* ********************************************************************* |
| * Pull in the BCM1250's SCD since lots of stuff is the same. |
| ********************************************************************* */ |
| |
| #include "sb1250_scd.h" |
| |
| /* ********************************************************************* |
| * Some general notes: |
| * |
| * This file is basically a "what's new" header file. Since the |
| * BCM1250 and the new BCM1480 (and derivatives) share many common |
| * features, this file contains only what's new or changed from |
| * the 1250. (above, you can see that we include the 1250 symbols |
| * to get the base functionality). |
| * |
| * In software, be sure to use the correct symbols, particularly |
| * for blocks that are different between the two chip families. |
| * All BCM1480-specific symbols have _BCM1480_ in their names, |
| * and all BCM1250-specific and "base" functions that are common in |
| * both chips have no special names (this is for compatibility with |
| * older include files). Therefore, if you're working with the |
| * SCD, which is very different on each chip, A_SCD_xxx implies |
| * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 |
| * version. |
| ********************************************************************* */ |
| |
| /* ********************************************************************* |
| * System control/debug registers |
| ********************************************************************* */ |
| |
| /* |
| * System Identification and Revision Register (Table 12) |
| * Register: SCD_SYSTEM_REVISION |
| * This register is field compatible with the 1250. |
| */ |
| |
| /* |
| * New part definitions |
| */ |
| |
| #define K_SYS_PART_BCM1480 0x1406 |
| #define K_SYS_PART_BCM1280 0x1206 |
| #define K_SYS_PART_BCM1455 0x1407 |
| #define K_SYS_PART_BCM1255 0x1257 |
| |
| /* |
| * Manufacturing Information Register (Table 14) |
| * Register: SCD_SYSTEM_MANUF |
| */ |
| |
| /* |
| * System Configuration Register (Table 15) |
| * Register: SCD_SYSTEM_CFG |
| * Entire register is different from 1250, all new constants below |
| */ |
| |
| #define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) |
| #define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) |
| #define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) |
| #define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) |
| #define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) |
| #define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) |
| |
| #define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) |
| #define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_PLL_DIV) |
| #define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_PLL_DIV) |
| #define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_PLL_DIV,M_BCM1480_SYS_PLL_DIV) |
| |
| #define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) |
| #define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_SW_DIV) |
| #define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_SW_DIV) |
| #define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_SW_DIV,M_BCM1480_SYS_SW_DIV) |
| |
| #define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) |
| #define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) |
| |
| #define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) |
| #define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2,S_BCM1480_SYS_BOOT_MODE) |
| #define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_BOOT_MODE) |
| #define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x,S_BCM1480_SYS_BOOT_MODE,M_BCM1480_SYS_BOOT_MODE) |
| #define K_BCM1480_SYS_BOOT_MODE_ROM32 0 |
| #define K_BCM1480_SYS_BOOT_MODE_ROM8 1 |
| #define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2 |
| #define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3 |
| #define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) |
| |
| #define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) |
| #define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) |
| #define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) |
| #define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) |
| #define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) |
| #define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) |
| |
| #define S_BCM1480_SYS_CONFIG 26 |
| #define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6,S_BCM1480_SYS_CONFIG) |
| #define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_CONFIG) |
| #define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x,S_BCM1480_SYS_CONFIG,M_BCM1480_SYS_CONFIG) |
| |
| #define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32,15) |
| |
| #define S_BCM1480_SYS_NODEID 47 |
| #define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4,S_BCM1480_SYS_NODEID) |
| #define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_NODEID) |
| #define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x,S_BCM1480_SYS_NODEID,M_BCM1480_SYS_NODEID) |
| |
| #define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) |
| #define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) |
| #define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) |
| #define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) |
| #define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) |
| #define S_BCM1480_SYS_DISABLECPU0 56 |
| #define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) |
| #define S_BCM1480_SYS_DISABLECPU1 57 |
| #define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) |
| #define S_BCM1480_SYS_DISABLECPU2 58 |
| #define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) |
| #define S_BCM1480_SYS_DISABLECPU3 59 |
| #define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) |
| |
| #define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) |
| #define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) |
| #define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) |
| #define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) |
| |
| /* |
| * Scratch Register (Table 16) |
| * Register: SCD_SYSTEM_SCRATCH |
| * Same as BCM1250 |
| */ |
| |
| |
| /* |
| * Mailbox Registers (Table 17) |
| * Registers: SCD_MBOX_{0,1}_CPU_x |
| * Same as BCM1250 |
| */ |
| |
| |
| /* |
| * See bcm1480_int.h for interrupt mapper registers. |
| */ |
| |
| |
| /* |
| * Watchdog Timer Initial Count Registers (Table 23) |
| * Registers: SCD_WDOG_INIT_CNT_x |
| * |
| * The watchdogs are almost the same as the 1250, except |
| * the configuration register has more bits to control the |
| * other CPUs. |
| */ |
| |
| |
| /* |
| * Watchdog Timer Configuration Registers (Table 25) |
| * Registers: SCD_WDOG_CFG_x |
| */ |
| |
| #define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) |
| |
| #define S_BCM1480_SCD_WDOG_RESET_TYPE 2 |
| #define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5,S_BCM1480_SCD_WDOG_RESET_TYPE) |
| #define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE) |
| #define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE,M_BCM1480_SCD_WDOG_RESET_TYPE) |
| |
| #define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ |
| #define K_BCM1480_SCD_WDOG_RESET_SOFT 1 |
| #define K_BCM1480_SCD_WDOG_RESET_CPU0 3 |
| #define K_BCM1480_SCD_WDOG_RESET_CPU1 5 |
| #define K_BCM1480_SCD_WDOG_RESET_CPU2 9 |
| #define K_BCM1480_SCD_WDOG_RESET_CPU3 17 |
| #define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31 |
| |
| |
| #define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) |
| |
| /* |
| * General Timer Initial Count Registers (Table 26) |
| * Registers: SCD_TIMER_INIT_x |
| * |
| * The timer registers are the same as the BCM1250 |
| */ |
| |
| |
| /* |
| * ZBbus Count Register (Table 29) |
| * Register: ZBBUS_CYCLE_COUNT |
| * |
| * Same as BCM1250 |
| */ |
| |
| /* |
| * ZBbus Compare Registers (Table 30) |
| * Registers: ZBBUS_CYCLE_CPx |
| * |
| * Same as BCM1250 |
| */ |
| |
| |
| /* |
| * System Performance Counter Configuration Register (Table 31) |
| * Register: PERF_CNT_CFG_0 |
| * |
| * Since the clear/enable bits are moved compared to the |
| * 1250 and there are more fields, this register will be BCM1480 specific. |
| */ |
| |
| #define S_BCM1480_SPC_CFG_SRC0 0 |
| #define M_BCM1480_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC0) |
| #define V_BCM1480_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC0) |
| #define G_BCM1480_SPC_CFG_SRC0(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC0,M_BCM1480_SPC_CFG_SRC0) |
| |
| #define S_BCM1480_SPC_CFG_SRC1 8 |
| #define M_BCM1480_SPC_CFG_SRC1 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC1) |
| #define V_BCM1480_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC1) |
| #define G_BCM1480_SPC_CFG_SRC1(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC1,M_BCM1480_SPC_CFG_SRC1) |
| |
| #define S_BCM1480_SPC_CFG_SRC2 16 |
| #define M_BCM1480_SPC_CFG_SRC2 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC2) |
| #define V_BCM1480_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC2) |
| #define G_BCM1480_SPC_CFG_SRC2(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC2,M_BCM1480_SPC_CFG_SRC2) |
| |
| #define S_BCM1480_SPC_CFG_SRC3 24 |
| #define M_BCM1480_SPC_CFG_SRC3 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC3) |
| #define V_BCM1480_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC3) |
| #define G_BCM1480_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC3,M_BCM1480_SPC_CFG_SRC3) |
| |
| #define S_BCM1480_SPC_CFG_SRC4 32 |
| #define M_BCM1480_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC4) |
| #define V_BCM1480_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC4) |
| #define G_BCM1480_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC4,M_BCM1480_SPC_CFG_SRC4) |
| |
| #define S_BCM1480_SPC_CFG_SRC5 40 |
| #define M_BCM1480_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC5) |
| #define V_BCM1480_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC5) |
| #define G_BCM1480_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC5,M_BCM1480_SPC_CFG_SRC5) |
| |
| #define S_BCM1480_SPC_CFG_SRC6 48 |
| #define M_BCM1480_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC6) |
| #define V_BCM1480_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC6) |
| #define G_BCM1480_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC6,M_BCM1480_SPC_CFG_SRC6) |
| |
| #define S_BCM1480_SPC_CFG_SRC7 56 |
| #define M_BCM1480_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC7) |
| #define V_BCM1480_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC7) |
| #define G_BCM1480_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC7,M_BCM1480_SPC_CFG_SRC7) |
| |
| /* |
| * System Performance Counter Control Register (Table 32) |
| * Register: PERF_CNT_CFG_1 |
| * BCM1480 specific |
| */ |
| |
| #define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) |
| #define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) |
| |
| /* |
| * System Performance Counters (Table 33) |
| * Registers: PERF_CNT_x |
| */ |
| |
| #define S_BCM1480_SPC_CNT_COUNT 0 |
| #define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40,S_BCM1480_SPC_CNT_COUNT) |
| #define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CNT_COUNT) |
| #define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x,S_BCM1480_SPC_CNT_COUNT,M_BCM1480_SPC_CNT_COUNT) |
| |
| #define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) |
| |
| |
| /* |
| * Bus Watcher Error Status Register (Tables 36, 37) |
| * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG |
| * Same as BCM1250. |
| */ |
| |
| /* |
| * Bus Watcher Error Data Registers (Table 38) |
| * Registers: BUS_ERR_DATA_x |
| * Same as BCM1250. |
| */ |
| |
| /* |
| * Bus Watcher L2 ECC Counter Register (Table 39) |
| * Register: BUS_L2_ERRORS |
| * Same as BCM1250. |
| */ |
| |
| |
| /* |
| * Bus Watcher Memory and I/O Error Counter Register (Table 40) |
| * Register: BUS_MEM_IO_ERRORS |
| * Same as BCM1250. |
| */ |
| |
| |
| /* |
| * Address Trap Registers |
| * |
| * Register layout same as BCM1250, almost. The bus agents |
| * are different, and the address trap configuration bits are |
| * slightly different. |
| */ |
| |
| #define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4,0) |
| #define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40,0) |
| |
| #define S_BCM1480_ATRAP_CFG_CNT 0 |
| #define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3,S_BCM1480_ATRAP_CFG_CNT) |
| #define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CNT) |
| #define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CNT,M_BCM1480_ATRAP_CFG_CNT) |
| |
| #define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) |
| #define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) |
| #define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) |
| #define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) |
| #define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) |
| |
| #define S_BCM1480_ATRAP_CFG_AGENTID 8 |
| #define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4,S_BCM1480_ATRAP_CFG_AGENTID) |
| #define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID) |
| #define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID,M_BCM1480_ATRAP_CFG_AGENTID) |
| |
| |
| #define K_BCM1480_BUS_AGENT_CPU0 0 |
| #define K_BCM1480_BUS_AGENT_CPU1 1 |
| #define K_BCM1480_BUS_AGENT_NC 2 |
| #define K_BCM1480_BUS_AGENT_IOB 3 |
| #define K_BCM1480_BUS_AGENT_SCD 4 |
| #define K_BCM1480_BUS_AGENT_L2C 6 |
| #define K_BCM1480_BUS_AGENT_MC 7 |
| #define K_BCM1480_BUS_AGENT_CPU2 8 |
| #define K_BCM1480_BUS_AGENT_CPU3 9 |
| #define K_BCM1480_BUS_AGENT_PM 10 |
| |
| #define S_BCM1480_ATRAP_CFG_CATTR 12 |
| #define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2,S_BCM1480_ATRAP_CFG_CATTR) |
| #define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CATTR) |
| #define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CATTR,M_BCM1480_ATRAP_CFG_CATTR) |
| |
| #define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0 |
| #define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 |
| #define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2 |
| #define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3 |
| |
| #define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) |
| |
| |
| /* |
| * Trace Event Registers (Table 47) |
| * Same as BCM1250. |
| */ |
| |
| /* |
| * Trace Sequence Control Registers (Table 48) |
| * Registers: TRACE_SEQUENCE_x |
| * |
| * Same as BCM1250 except for two new fields. |
| */ |
| |
| |
| #define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25) |
| |
| #define S_BCM1480_SCD_TRSEQ_SWFUNC 26 |
| #define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2,S_BCM1480_SCD_TRSEQ_SWFUNC) |
| #define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC) |
| #define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC,M_BCM1480_SCD_TRSEQ_SWFUNC) |
| |
| /* |
| * Trace Control Register (Table 49) |
| * Register: TRACE_CFG |
| * |
| * Bits 0..8 are the same as the BCM1250, rest are different. |
| * Entire register is redefined below. |
| */ |
| |
| #define M_BCM1480_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) |
| #define M_BCM1480_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) |
| #define M_BCM1480_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) |
| #define M_BCM1480_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3) |
| #define M_BCM1480_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4) |
| #define M_BCM1480_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) |
| #define M_BCM1480_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) |
| #define M_BCM1480_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) |
| #define M_BCM1480_SCD_TRACE_CFG_FORCE_CNT _SB_MAKEMASK1(8) |
| |
| #define S_BCM1480_SCD_TRACE_CFG_MODE 16 |
| #define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE) |
| #define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE) |
| #define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE,M_BCM1480_SCD_TRACE_CFG_MODE) |
| |
| #define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0 |
| #define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 |
| #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 |
| |
| #define S_BCM1480_SCD_TRACE_CFG_CUR_ADDR 24 |
| #define M_BCM1480_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR) |
| #define V_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR) |
| #define G_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR,M_BCM1480_SCD_TRACE_CFG_CUR_ADDR) |
| |
| #endif /* _BCM1480_SCD_H */ |
