| /* |
| * Written by: Garry Forsgren, Unisys Corporation |
| * Natalie Protasevich, Unisys Corporation |
| * This file contains the code to configure and interface |
| * with Unisys ES7000 series hardware system manager. |
| * |
| * Copyright (c) 2003 Unisys Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * Contact information: Unisys Corporation, Township Line & Union Meeting |
| * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or: |
| * |
| * http://www.unisys.com |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/smp.h> |
| #include <linux/string.h> |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <asm/io.h> |
| #include <asm/nmi.h> |
| #include <asm/smp.h> |
| #include <asm/atomic.h> |
| #include <asm/apicdef.h> |
| #include <asm/genapic.h> |
| #include <asm/setup.h> |
| |
| /* |
| * ES7000 chipsets |
| */ |
| |
| #define NON_UNISYS 0 |
| #define ES7000_CLASSIC 1 |
| #define ES7000_ZORRO 2 |
| |
| |
| #define MIP_REG 1 |
| #define MIP_PSAI_REG 4 |
| |
| #define MIP_BUSY 1 |
| #define MIP_SPIN 0xf0000 |
| #define MIP_VALID 0x0100000000000000ULL |
| #define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff) |
| |
| #define MIP_RD_LO(VALUE) (VALUE & 0xffffffff) |
| |
| struct mip_reg_info { |
| unsigned long long mip_info; |
| unsigned long long delivery_info; |
| unsigned long long host_reg; |
| unsigned long long mip_reg; |
| }; |
| |
| struct part_info { |
| unsigned char type; |
| unsigned char length; |
| unsigned char part_id; |
| unsigned char apic_mode; |
| unsigned long snum; |
| char ptype[16]; |
| char sname[64]; |
| char pname[64]; |
| }; |
| |
| struct psai { |
| unsigned long long entry_type; |
| unsigned long long addr; |
| unsigned long long bep_addr; |
| }; |
| |
| struct es7000_mem_info { |
| unsigned char type; |
| unsigned char length; |
| unsigned char resv[6]; |
| unsigned long long start; |
| unsigned long long size; |
| }; |
| |
| struct es7000_oem_table { |
| unsigned long long hdr; |
| struct mip_reg_info mip; |
| struct part_info pif; |
| struct es7000_mem_info shm; |
| struct psai psai; |
| }; |
| |
| #ifdef CONFIG_ACPI |
| |
| struct oem_table { |
| struct acpi_table_header Header; |
| u32 OEMTableAddr; |
| u32 OEMTableSize; |
| }; |
| |
| extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); |
| extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr); |
| #endif |
| |
| struct mip_reg { |
| unsigned long long off_0; |
| unsigned long long off_8; |
| unsigned long long off_10; |
| unsigned long long off_18; |
| unsigned long long off_20; |
| unsigned long long off_28; |
| unsigned long long off_30; |
| unsigned long long off_38; |
| }; |
| |
| #define MIP_SW_APIC 0x1020b |
| #define MIP_FUNC(VALUE) (VALUE & 0xff) |
| |
| /* |
| * ES7000 Globals |
| */ |
| |
| static volatile unsigned long *psai = NULL; |
| static struct mip_reg *mip_reg; |
| static struct mip_reg *host_reg; |
| static int mip_port; |
| static unsigned long mip_addr, host_addr; |
| |
| int es7000_plat; |
| |
| /* |
| * GSI override for ES7000 platforms. |
| */ |
| |
| static unsigned int base; |
| |
| static int |
| es7000_rename_gsi(int ioapic, int gsi) |
| { |
| if (es7000_plat == ES7000_ZORRO) |
| return gsi; |
| |
| if (!base) { |
| int i; |
| for (i = 0; i < nr_ioapics; i++) |
| base += nr_ioapic_registers[i]; |
| } |
| |
| if (!ioapic && (gsi < 16)) |
| gsi += base; |
| return gsi; |
| } |
| |
| static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) |
| { |
| unsigned long vect = 0, psaival = 0; |
| |
| if (psai == NULL) |
| return -1; |
| |
| vect = ((unsigned long)__pa(eip)/0x1000) << 16; |
| psaival = (0x1000000 | vect | cpu); |
| |
| while (*psai & 0x1000000) |
| ; |
| |
| *psai = psaival; |
| |
| return 0; |
| } |
| |
| static int __init es7000_update_genapic(void) |
| { |
| apic->wakeup_cpu = wakeup_secondary_cpu_via_mip; |
| |
| /* MPENTIUMIII */ |
| if (boot_cpu_data.x86 == 6 && |
| (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) { |
| es7000_update_genapic_to_cluster(); |
| apic->wait_for_init_deassert = NULL; |
| apic->wakeup_cpu = wakeup_secondary_cpu_via_mip; |
| } |
| |
| return 0; |
| } |
| |
| void __init |
| setup_unisys(void) |
| { |
| /* |
| * Determine the generation of the ES7000 currently running. |
| * |
| * es7000_plat = 1 if the machine is a 5xx ES7000 box |
| * es7000_plat = 2 if the machine is a x86_64 ES7000 box |
| * |
| */ |
| if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) |
| es7000_plat = ES7000_ZORRO; |
| else |
| es7000_plat = ES7000_CLASSIC; |
| ioapic_renumber_irq = es7000_rename_gsi; |
| |
| x86_quirks->update_genapic = es7000_update_genapic; |
| } |
| |
| /* |
| * Parse the OEM Table |
| */ |
| |
| int __init |
| parse_unisys_oem (char *oemptr) |
| { |
| int i; |
| int success = 0; |
| unsigned char type, size; |
| unsigned long val; |
| char *tp = NULL; |
| struct psai *psaip = NULL; |
| struct mip_reg_info *mi; |
| struct mip_reg *host, *mip; |
| |
| tp = oemptr; |
| |
| tp += 8; |
| |
| for (i=0; i <= 6; i++) { |
| type = *tp++; |
| size = *tp++; |
| tp -= 2; |
| switch (type) { |
| case MIP_REG: |
| mi = (struct mip_reg_info *)tp; |
| val = MIP_RD_LO(mi->host_reg); |
| host_addr = val; |
| host = (struct mip_reg *)val; |
| host_reg = __va(host); |
| val = MIP_RD_LO(mi->mip_reg); |
| mip_port = MIP_PORT(mi->mip_info); |
| mip_addr = val; |
| mip = (struct mip_reg *)val; |
| mip_reg = __va(mip); |
| pr_debug("es7000_mipcfg: host_reg = 0x%lx \n", |
| (unsigned long)host_reg); |
| pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n", |
| (unsigned long)mip_reg); |
| success++; |
| break; |
| case MIP_PSAI_REG: |
| psaip = (struct psai *)tp; |
| if (tp != NULL) { |
| if (psaip->addr) |
| psai = __va(psaip->addr); |
| else |
| psai = NULL; |
| success++; |
| } |
| break; |
| default: |
| break; |
| } |
| tp += size; |
| } |
| |
| if (success < 2) { |
| es7000_plat = NON_UNISYS; |
| } else |
| setup_unisys(); |
| return es7000_plat; |
| } |
| |
| #ifdef CONFIG_ACPI |
| static unsigned long oem_addrX; |
| static unsigned long oem_size; |
| int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) |
| { |
| struct acpi_table_header *header = NULL; |
| int i = 0; |
| acpi_size tbl_size; |
| |
| while (ACPI_SUCCESS(acpi_get_table_with_size("OEM1", i++, &header, &tbl_size))) { |
| if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) { |
| struct oem_table *t = (struct oem_table *)header; |
| |
| oem_addrX = t->OEMTableAddr; |
| oem_size = t->OEMTableSize; |
| early_acpi_os_unmap_memory(header, tbl_size); |
| |
| *oem_addr = (unsigned long)__acpi_map_table(oem_addrX, |
| oem_size); |
| return 0; |
| } |
| early_acpi_os_unmap_memory(header, tbl_size); |
| } |
| return -1; |
| } |
| |
| void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr) |
| { |
| if (!oem_addr) |
| return; |
| |
| __acpi_unmap_table((char *)oem_addr, oem_size); |
| } |
| #endif |
| |
| static void |
| es7000_spin(int n) |
| { |
| int i = 0; |
| |
| while (i++ < n) |
| rep_nop(); |
| } |
| |
| static int __init |
| es7000_mip_write(struct mip_reg *mip_reg) |
| { |
| int status = 0; |
| int spin; |
| |
| spin = MIP_SPIN; |
| while (((unsigned long long)host_reg->off_38 & |
| (unsigned long long)MIP_VALID) != 0) { |
| if (--spin <= 0) { |
| printk("es7000_mip_write: Timeout waiting for Host Valid Flag"); |
| return -1; |
| } |
| es7000_spin(MIP_SPIN); |
| } |
| |
| memcpy(host_reg, mip_reg, sizeof(struct mip_reg)); |
| outb(1, mip_port); |
| |
| spin = MIP_SPIN; |
| |
| while (((unsigned long long)mip_reg->off_38 & |
| (unsigned long long)MIP_VALID) == 0) { |
| if (--spin <= 0) { |
| printk("es7000_mip_write: Timeout waiting for MIP Valid Flag"); |
| return -1; |
| } |
| es7000_spin(MIP_SPIN); |
| } |
| |
| status = ((unsigned long long)mip_reg->off_0 & |
| (unsigned long long)0xffff0000000000ULL) >> 48; |
| mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 & |
| (unsigned long long)~MIP_VALID); |
| return status; |
| } |
| |
| void __init es7000_enable_apic_mode(void) |
| { |
| struct mip_reg es7000_mip_reg; |
| int mip_status; |
| |
| if (!es7000_plat) |
| return; |
| |
| printk("ES7000: Enabling APIC mode.\n"); |
| memset(&es7000_mip_reg, 0, sizeof(struct mip_reg)); |
| es7000_mip_reg.off_0 = MIP_SW_APIC; |
| es7000_mip_reg.off_38 = MIP_VALID; |
| |
| while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) { |
| printk("es7000_enable_apic_mode: command failed, status = %x\n", |
| mip_status); |
| } |
| } |
| |
| /* |
| * APIC driver for the Unisys ES7000 chipset. |
| */ |
| #define APIC_DEFINITION 1 |
| #include <linux/threads.h> |
| #include <linux/cpumask.h> |
| #include <asm/mpspec.h> |
| #include <asm/genapic.h> |
| #include <asm/fixmap.h> |
| #include <asm/apicdef.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <linux/smp.h> |
| #include <asm/ipi.h> |
| |
| #define APIC_DFR_VALUE_CLUSTER (APIC_DFR_CLUSTER) |
| #define INT_DELIVERY_MODE_CLUSTER (dest_LowestPrio) |
| #define INT_DEST_MODE_CLUSTER (1) /* logical delivery broadcast to all procs */ |
| |
| #define APIC_DFR_VALUE (APIC_DFR_FLAT) |
| |
| extern void es7000_enable_apic_mode(void); |
| extern int apic_version [MAX_APICS]; |
| extern u8 cpu_2_logical_apicid[]; |
| extern unsigned int boot_cpu_physical_apicid; |
| |
| extern int parse_unisys_oem (char *oemptr); |
| extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); |
| extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr); |
| extern void setup_unisys(void); |
| |
| #define apicid_cluster(apicid) (apicid & 0xF0) |
| #define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu) |
| |
| static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask) |
| { |
| /* Careful. Some cpus do not strictly honor the set of cpus |
| * specified in the interrupt destination when using lowest |
| * priority interrupt delivery mode. |
| * |
| * In particular there was a hyperthreading cpu observed to |
| * deliver interrupts to the wrong hyperthread when only one |
| * hyperthread was specified in the interrupt desitination. |
| */ |
| *retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } }; |
| } |
| |
| |
| static void es7000_wait_for_init_deassert(atomic_t *deassert) |
| { |
| #ifndef CONFIG_ES7000_CLUSTERED_APIC |
| while (!atomic_read(deassert)) |
| cpu_relax(); |
| #endif |
| return; |
| } |
| |
| static unsigned int es7000_get_apic_id(unsigned long x) |
| { |
| return (x >> 24) & 0xFF; |
| } |
| |
| #ifdef CONFIG_ACPI |
| static int es7000_check_dsdt(void) |
| { |
| struct acpi_table_header header; |
| |
| if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) && |
| !strncmp(header.oem_id, "UNISYS", 6)) |
| return 1; |
| return 0; |
| } |
| #endif |
| |
| static void es7000_send_IPI_mask(const struct cpumask *mask, int vector) |
| { |
| default_send_IPI_mask_sequence_phys(mask, vector); |
| } |
| |
| static void es7000_send_IPI_allbutself(int vector) |
| { |
| default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector); |
| } |
| |
| static void es7000_send_IPI_all(int vector) |
| { |
| es7000_send_IPI_mask(cpu_online_mask, vector); |
| } |
| |
| static int es7000_apic_id_registered(void) |
| { |
| return 1; |
| } |
| |
| static const cpumask_t *target_cpus_cluster(void) |
| { |
| return &CPU_MASK_ALL; |
| } |
| |
| static const cpumask_t *es7000_target_cpus(void) |
| { |
| return &cpumask_of_cpu(smp_processor_id()); |
| } |
| |
| static unsigned long |
| es7000_check_apicid_used(physid_mask_t bitmap, int apicid) |
| { |
| return 0; |
| } |
| static unsigned long es7000_check_apicid_present(int bit) |
| { |
| return physid_isset(bit, phys_cpu_present_map); |
| } |
| |
| static unsigned long calculate_ldr(int cpu) |
| { |
| unsigned long id = xapic_phys_to_log_apicid(cpu); |
| |
| return (SET_APIC_LOGICAL_ID(id)); |
| } |
| |
| /* |
| * Set up the logical destination ID. |
| * |
| * Intel recommends to set DFR, LdR and TPR before enabling |
| * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel |
| * document number 292116). So here it goes... |
| */ |
| static void es7000_init_apic_ldr_cluster(void) |
| { |
| unsigned long val; |
| int cpu = smp_processor_id(); |
| |
| apic_write(APIC_DFR, APIC_DFR_VALUE_CLUSTER); |
| val = calculate_ldr(cpu); |
| apic_write(APIC_LDR, val); |
| } |
| |
| static void es7000_init_apic_ldr(void) |
| { |
| unsigned long val; |
| int cpu = smp_processor_id(); |
| |
| apic_write(APIC_DFR, APIC_DFR_VALUE); |
| val = calculate_ldr(cpu); |
| apic_write(APIC_LDR, val); |
| } |
| |
| static void es7000_setup_apic_routing(void) |
| { |
| int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id()); |
| printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", |
| (apic_version[apic] == 0x14) ? |
| "Physical Cluster" : "Logical Cluster", |
| nr_ioapics, cpus_addr(*es7000_target_cpus())[0]); |
| } |
| |
| static int es7000_apicid_to_node(int logical_apicid) |
| { |
| return 0; |
| } |
| |
| |
| static int es7000_cpu_present_to_apicid(int mps_cpu) |
| { |
| if (!mps_cpu) |
| return boot_cpu_physical_apicid; |
| else if (mps_cpu < nr_cpu_ids) |
| return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu); |
| else |
| return BAD_APICID; |
| } |
| |
| static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid) |
| { |
| static int id = 0; |
| physid_mask_t mask; |
| |
| mask = physid_mask_of_physid(id); |
| ++id; |
| |
| return mask; |
| } |
| |
| /* Mapping from cpu number to logical apicid */ |
| static int es7000_cpu_to_logical_apicid(int cpu) |
| { |
| #ifdef CONFIG_SMP |
| if (cpu >= nr_cpu_ids) |
| return BAD_APICID; |
| return (int)cpu_2_logical_apicid[cpu]; |
| #else |
| return logical_smp_processor_id(); |
| #endif |
| } |
| |
| static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map) |
| { |
| /* For clustered we don't have a good way to do this yet - hack */ |
| return physids_promote(0xff); |
| } |
| |
| static int es7000_check_phys_apicid_present(int cpu_physical_apicid) |
| { |
| boot_cpu_physical_apicid = read_apic_id(); |
| return (1); |
| } |
| |
| static unsigned int |
| es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask) |
| { |
| int cpus_found = 0; |
| int num_bits_set; |
| int apicid; |
| int cpu; |
| |
| num_bits_set = cpumask_weight(cpumask); |
| /* Return id to all */ |
| if (num_bits_set == nr_cpu_ids) |
| return 0xFF; |
| /* |
| * The cpus in the mask must all be on the apic cluster. If are not |
| * on the same apicid cluster return default value of target_cpus(): |
| */ |
| cpu = cpumask_first(cpumask); |
| apicid = es7000_cpu_to_logical_apicid(cpu); |
| |
| while (cpus_found < num_bits_set) { |
| if (cpumask_test_cpu(cpu, cpumask)) { |
| int new_apicid = es7000_cpu_to_logical_apicid(cpu); |
| |
| if (apicid_cluster(apicid) != |
| apicid_cluster(new_apicid)) { |
| printk ("%s: Not a valid mask!\n", __func__); |
| |
| return 0xFF; |
| } |
| apicid = new_apicid; |
| cpus_found++; |
| } |
| cpu++; |
| } |
| return apicid; |
| } |
| |
| static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask) |
| { |
| int cpus_found = 0; |
| int num_bits_set; |
| int apicid; |
| int cpu; |
| |
| num_bits_set = cpus_weight(*cpumask); |
| /* Return id to all */ |
| if (num_bits_set == nr_cpu_ids) |
| return es7000_cpu_to_logical_apicid(0); |
| /* |
| * The cpus in the mask must all be on the apic cluster. If are not |
| * on the same apicid cluster return default value of target_cpus(): |
| */ |
| cpu = first_cpu(*cpumask); |
| apicid = es7000_cpu_to_logical_apicid(cpu); |
| while (cpus_found < num_bits_set) { |
| if (cpu_isset(cpu, *cpumask)) { |
| int new_apicid = es7000_cpu_to_logical_apicid(cpu); |
| |
| if (apicid_cluster(apicid) != |
| apicid_cluster(new_apicid)) { |
| printk ("%s: Not a valid mask!\n", __func__); |
| |
| return es7000_cpu_to_logical_apicid(0); |
| } |
| apicid = new_apicid; |
| cpus_found++; |
| } |
| cpu++; |
| } |
| return apicid; |
| } |
| |
| static unsigned int |
| es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask, |
| const struct cpumask *andmask) |
| { |
| int apicid = es7000_cpu_to_logical_apicid(0); |
| cpumask_var_t cpumask; |
| |
| if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) |
| return apicid; |
| |
| cpumask_and(cpumask, inmask, andmask); |
| cpumask_and(cpumask, cpumask, cpu_online_mask); |
| apicid = es7000_cpu_mask_to_apicid(cpumask); |
| |
| free_cpumask_var(cpumask); |
| |
| return apicid; |
| } |
| |
| static int es7000_phys_pkg_id(int cpuid_apic, int index_msb) |
| { |
| return cpuid_apic >> index_msb; |
| } |
| |
| void __init es7000_update_genapic_to_cluster(void) |
| { |
| apic->target_cpus = target_cpus_cluster; |
| apic->irq_delivery_mode = INT_DELIVERY_MODE_CLUSTER; |
| apic->irq_dest_mode = INT_DEST_MODE_CLUSTER; |
| |
| apic->init_apic_ldr = es7000_init_apic_ldr_cluster; |
| |
| apic->cpu_mask_to_apicid = es7000_cpu_mask_to_apicid_cluster; |
| } |
| |
| static int probe_es7000(void) |
| { |
| /* probed later in mptable/ACPI hooks */ |
| return 0; |
| } |
| |
| static __init int |
| es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid) |
| { |
| if (mpc->oemptr) { |
| struct mpc_oemtable *oem_table = |
| (struct mpc_oemtable *)mpc->oemptr; |
| |
| if (!strncmp(oem, "UNISYS", 6)) |
| return parse_unisys_oem((char *)oem_table); |
| } |
| return 0; |
| } |
| |
| #ifdef CONFIG_ACPI |
| /* Hook from generic ACPI tables.c */ |
| static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) |
| { |
| unsigned long oem_addr = 0; |
| int check_dsdt; |
| int ret = 0; |
| |
| /* check dsdt at first to avoid clear fix_map for oem_addr */ |
| check_dsdt = es7000_check_dsdt(); |
| |
| if (!find_unisys_acpi_oem_table(&oem_addr)) { |
| if (check_dsdt) |
| ret = parse_unisys_oem((char *)oem_addr); |
| else { |
| setup_unisys(); |
| ret = 1; |
| } |
| /* |
| * we need to unmap it |
| */ |
| unmap_unisys_acpi_oem_table(oem_addr); |
| } |
| return ret; |
| } |
| #else |
| static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) |
| { |
| return 0; |
| } |
| #endif |
| |
| |
| struct genapic apic_es7000 = { |
| |
| .name = "es7000", |
| .probe = probe_es7000, |
| .acpi_madt_oem_check = es7000_acpi_madt_oem_check, |
| .apic_id_registered = es7000_apic_id_registered, |
| |
| .irq_delivery_mode = dest_Fixed, |
| /* phys delivery to target CPUs: */ |
| .irq_dest_mode = 0, |
| |
| .target_cpus = es7000_target_cpus, |
| .disable_esr = 1, |
| .dest_logical = 0, |
| .check_apicid_used = es7000_check_apicid_used, |
| .check_apicid_present = es7000_check_apicid_present, |
| |
| .vector_allocation_domain = es7000_vector_allocation_domain, |
| .init_apic_ldr = es7000_init_apic_ldr, |
| |
| .ioapic_phys_id_map = es7000_ioapic_phys_id_map, |
| .setup_apic_routing = es7000_setup_apic_routing, |
| .multi_timer_check = NULL, |
| .apicid_to_node = es7000_apicid_to_node, |
| .cpu_to_logical_apicid = es7000_cpu_to_logical_apicid, |
| .cpu_present_to_apicid = es7000_cpu_present_to_apicid, |
| .apicid_to_cpu_present = es7000_apicid_to_cpu_present, |
| .setup_portio_remap = NULL, |
| .check_phys_apicid_present = es7000_check_phys_apicid_present, |
| .enable_apic_mode = es7000_enable_apic_mode, |
| .phys_pkg_id = es7000_phys_pkg_id, |
| .mps_oem_check = es7000_mps_oem_check, |
| |
| .get_apic_id = es7000_get_apic_id, |
| .set_apic_id = NULL, |
| .apic_id_mask = 0xFF << 24, |
| |
| .cpu_mask_to_apicid = es7000_cpu_mask_to_apicid, |
| .cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and, |
| |
| .send_IPI_mask = es7000_send_IPI_mask, |
| .send_IPI_mask_allbutself = NULL, |
| .send_IPI_allbutself = es7000_send_IPI_allbutself, |
| .send_IPI_all = es7000_send_IPI_all, |
| .send_IPI_self = default_send_IPI_self, |
| |
| .wakeup_cpu = NULL, |
| |
| .trampoline_phys_low = 0x467, |
| .trampoline_phys_high = 0x469, |
| |
| .wait_for_init_deassert = es7000_wait_for_init_deassert, |
| |
| /* Nothing to do for most platforms, since cleared by the INIT cycle: */ |
| .smp_callin_clear_local_apic = NULL, |
| .store_NMI_vector = NULL, |
| .inquire_remote_apic = default_inquire_remote_apic, |
| }; |