| /* |
| * linux/drivers/s390/cio/cmf.c ($Revision: 1.16 $) |
| * |
| * Linux on zSeries Channel Measurement Facility support |
| * |
| * Copyright 2000,2003 IBM Corporation |
| * |
| * Author: Arnd Bergmann <arndb@de.ibm.com> |
| * |
| * original idea from Natarajan Krishnaswami <nkrishna@us.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/bootmem.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| |
| #include <asm/ccwdev.h> |
| #include <asm/cio.h> |
| #include <asm/cmb.h> |
| |
| #include "cio.h" |
| #include "css.h" |
| #include "device.h" |
| #include "ioasm.h" |
| #include "chsc.h" |
| |
| /* parameter to enable cmf during boot, possible uses are: |
| * "s390cmf" -- enable cmf and allocate 2 MB of ram so measuring can be |
| * used on any subchannel |
| * "s390cmf=<num>" -- enable cmf and allocate enough memory to measure |
| * <num> subchannel, where <num> is an integer |
| * between 1 and 65535, default is 1024 |
| */ |
| #define ARGSTRING "s390cmf" |
| |
| /* indices for READCMB */ |
| enum cmb_index { |
| /* basic and exended format: */ |
| cmb_ssch_rsch_count, |
| cmb_sample_count, |
| cmb_device_connect_time, |
| cmb_function_pending_time, |
| cmb_device_disconnect_time, |
| cmb_control_unit_queuing_time, |
| cmb_device_active_only_time, |
| /* extended format only: */ |
| cmb_device_busy_time, |
| cmb_initial_command_response_time, |
| }; |
| |
| /** |
| * enum cmb_format - types of supported measurement block formats |
| * |
| * @CMF_BASIC: traditional channel measurement blocks supported |
| * by all machines that we run on |
| * @CMF_EXTENDED: improved format that was introduced with the z990 |
| * machine |
| * @CMF_AUTODETECT: default: use extended format when running on a z990 |
| * or later machine, otherwise fall back to basic format |
| **/ |
| enum cmb_format { |
| CMF_BASIC, |
| CMF_EXTENDED, |
| CMF_AUTODETECT = -1, |
| }; |
| /** |
| * format - actual format for all measurement blocks |
| * |
| * The format module parameter can be set to a value of 0 (zero) |
| * or 1, indicating basic or extended format as described for |
| * enum cmb_format. |
| */ |
| static int format = CMF_AUTODETECT; |
| module_param(format, bool, 0444); |
| |
| /** |
| * struct cmb_operations - functions to use depending on cmb_format |
| * |
| * all these functions operate on a struct cmf_device. There is only |
| * one instance of struct cmb_operations because all cmf_device |
| * objects are guaranteed to be of the same type. |
| * |
| * @alloc: allocate memory for a channel measurement block, |
| * either with the help of a special pool or with kmalloc |
| * @free: free memory allocated with @alloc |
| * @set: enable or disable measurement |
| * @readall: read a measurement block in a common format |
| * @reset: clear the data in the associated measurement block and |
| * reset its time stamp |
| */ |
| struct cmb_operations { |
| int (*alloc) (struct ccw_device*); |
| void(*free) (struct ccw_device*); |
| int (*set) (struct ccw_device*, u32); |
| u64 (*read) (struct ccw_device*, int); |
| int (*readall)(struct ccw_device*, struct cmbdata *); |
| void (*reset) (struct ccw_device*); |
| |
| struct attribute_group *attr_group; |
| }; |
| static struct cmb_operations *cmbops; |
| |
| /* our user interface is designed in terms of nanoseconds, |
| * while the hardware measures total times in its own |
| * unit.*/ |
| static inline u64 time_to_nsec(u32 value) |
| { |
| return ((u64)value) * 128000ull; |
| } |
| |
| /* |
| * Users are usually interested in average times, |
| * not accumulated time. |
| * This also helps us with atomicity problems |
| * when reading sinlge values. |
| */ |
| static inline u64 time_to_avg_nsec(u32 value, u32 count) |
| { |
| u64 ret; |
| |
| /* no samples yet, avoid division by 0 */ |
| if (count == 0) |
| return 0; |
| |
| /* value comes in units of 128 µsec */ |
| ret = time_to_nsec(value); |
| do_div(ret, count); |
| |
| return ret; |
| } |
| |
| /* activate or deactivate the channel monitor. When area is NULL, |
| * the monitor is deactivated. The channel monitor needs to |
| * be active in order to measure subchannels, which also need |
| * to be enabled. */ |
| static inline void |
| cmf_activate(void *area, unsigned int onoff) |
| { |
| register void * __gpr2 asm("2"); |
| register long __gpr1 asm("1"); |
| |
| __gpr2 = area; |
| __gpr1 = onoff ? 2 : 0; |
| /* activate channel measurement */ |
| asm("schm" : : "d" (__gpr2), "d" (__gpr1) ); |
| } |
| |
| static int |
| set_schib(struct ccw_device *cdev, u32 mme, int mbfc, unsigned long address) |
| { |
| int ret; |
| int retry; |
| struct subchannel *sch; |
| struct schib *schib; |
| |
| sch = to_subchannel(cdev->dev.parent); |
| schib = &sch->schib; |
| /* msch can silently fail, so do it again if necessary */ |
| for (retry = 0; retry < 3; retry++) { |
| /* prepare schib */ |
| stsch(sch->irq, schib); |
| schib->pmcw.mme = mme; |
| schib->pmcw.mbfc = mbfc; |
| /* address can be either a block address or a block index */ |
| if (mbfc) |
| schib->mba = address; |
| else |
| schib->pmcw.mbi = address; |
| |
| /* try to submit it */ |
| switch(ret = msch_err(sch->irq, schib)) { |
| case 0: |
| break; |
| case 1: |
| case 2: /* in I/O or status pending */ |
| ret = -EBUSY; |
| break; |
| case 3: /* subchannel is no longer valid */ |
| ret = -ENODEV; |
| break; |
| default: /* msch caught an exception */ |
| ret = -EINVAL; |
| break; |
| } |
| stsch(sch->irq, schib); /* restore the schib */ |
| |
| if (ret) |
| break; |
| |
| /* check if it worked */ |
| if (schib->pmcw.mme == mme && |
| schib->pmcw.mbfc == mbfc && |
| (mbfc ? (schib->mba == address) |
| : (schib->pmcw.mbi == address))) |
| return 0; |
| |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| struct set_schib_struct { |
| u32 mme; |
| int mbfc; |
| unsigned long address; |
| wait_queue_head_t wait; |
| int ret; |
| }; |
| |
| static int set_schib_wait(struct ccw_device *cdev, u32 mme, |
| int mbfc, unsigned long address) |
| { |
| struct set_schib_struct s = { |
| .mme = mme, |
| .mbfc = mbfc, |
| .address = address, |
| .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s.wait), |
| }; |
| |
| spin_lock_irq(cdev->ccwlock); |
| s.ret = set_schib(cdev, mme, mbfc, address); |
| if (s.ret != -EBUSY) { |
| goto out_nowait; |
| } |
| |
| if (cdev->private->state != DEV_STATE_ONLINE) { |
| s.ret = -EBUSY; |
| /* if the device is not online, don't even try again */ |
| goto out_nowait; |
| } |
| cdev->private->state = DEV_STATE_CMFCHANGE; |
| cdev->private->cmb_wait = &s; |
| s.ret = 1; |
| |
| spin_unlock_irq(cdev->ccwlock); |
| if (wait_event_interruptible(s.wait, s.ret != 1)) { |
| spin_lock_irq(cdev->ccwlock); |
| if (s.ret == 1) { |
| s.ret = -ERESTARTSYS; |
| cdev->private->cmb_wait = 0; |
| if (cdev->private->state == DEV_STATE_CMFCHANGE) |
| cdev->private->state = DEV_STATE_ONLINE; |
| } |
| spin_unlock_irq(cdev->ccwlock); |
| } |
| return s.ret; |
| |
| out_nowait: |
| spin_unlock_irq(cdev->ccwlock); |
| return s.ret; |
| } |
| |
| void retry_set_schib(struct ccw_device *cdev) |
| { |
| struct set_schib_struct *s; |
| |
| s = cdev->private->cmb_wait; |
| cdev->private->cmb_wait = 0; |
| if (!s) { |
| WARN_ON(1); |
| return; |
| } |
| s->ret = set_schib(cdev, s->mme, s->mbfc, s->address); |
| wake_up(&s->wait); |
| } |
| |
| /** |
| * struct cmb_area - container for global cmb data |
| * |
| * @mem: pointer to CMBs (only in basic measurement mode) |
| * @list: contains a linked list of all subchannels |
| * @lock: protect concurrent access to @mem and @list |
| */ |
| struct cmb_area { |
| struct cmb *mem; |
| struct list_head list; |
| int num_channels; |
| spinlock_t lock; |
| }; |
| |
| static struct cmb_area cmb_area = { |
| .lock = SPIN_LOCK_UNLOCKED, |
| .list = LIST_HEAD_INIT(cmb_area.list), |
| .num_channels = 1024, |
| }; |
| |
| |
| /* ****** old style CMB handling ********/ |
| |
| /** int maxchannels |
| * |
| * Basic channel measurement blocks are allocated in one contiguous |
| * block of memory, which can not be moved as long as any channel |
| * is active. Therefore, a maximum number of subchannels needs to |
| * be defined somewhere. This is a module parameter, defaulting to |
| * a resonable value of 1024, or 32 kb of memory. |
| * Current kernels don't allow kmalloc with more than 128kb, so the |
| * maximum is 4096 |
| */ |
| |
| module_param_named(maxchannels, cmb_area.num_channels, uint, 0444); |
| |
| /** |
| * struct cmb - basic channel measurement block |
| * |
| * cmb as used by the hardware the fields are described in z/Architecture |
| * Principles of Operation, chapter 17. |
| * The area to be a contiguous array and may not be reallocated or freed. |
| * Only one cmb area can be present in the system. |
| */ |
| struct cmb { |
| u16 ssch_rsch_count; |
| u16 sample_count; |
| u32 device_connect_time; |
| u32 function_pending_time; |
| u32 device_disconnect_time; |
| u32 control_unit_queuing_time; |
| u32 device_active_only_time; |
| u32 reserved[2]; |
| }; |
| |
| /* insert a single device into the cmb_area list |
| * called with cmb_area.lock held from alloc_cmb |
| */ |
| static inline int |
| alloc_cmb_single (struct ccw_device *cdev) |
| { |
| struct cmb *cmb; |
| struct ccw_device_private *node; |
| int ret; |
| |
| spin_lock_irq(cdev->ccwlock); |
| if (!list_empty(&cdev->private->cmb_list)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* find first unused cmb in cmb_area.mem. |
| * this is a little tricky: cmb_area.list |
| * remains sorted by ->cmb pointers */ |
| cmb = cmb_area.mem; |
| list_for_each_entry(node, &cmb_area.list, cmb_list) { |
| if ((struct cmb*)node->cmb > cmb) |
| break; |
| cmb++; |
| } |
| if (cmb - cmb_area.mem >= cmb_area.num_channels) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* insert new cmb */ |
| list_add_tail(&cdev->private->cmb_list, &node->cmb_list); |
| cdev->private->cmb = cmb; |
| ret = 0; |
| out: |
| spin_unlock_irq(cdev->ccwlock); |
| return ret; |
| } |
| |
| static int |
| alloc_cmb (struct ccw_device *cdev) |
| { |
| int ret; |
| struct cmb *mem; |
| ssize_t size; |
| |
| spin_lock(&cmb_area.lock); |
| |
| if (!cmb_area.mem) { |
| /* there is no user yet, so we need a new area */ |
| size = sizeof(struct cmb) * cmb_area.num_channels; |
| WARN_ON(!list_empty(&cmb_area.list)); |
| |
| spin_unlock(&cmb_area.lock); |
| mem = (void*)__get_free_pages(GFP_KERNEL | GFP_DMA, |
| get_order(size)); |
| spin_lock(&cmb_area.lock); |
| |
| if (cmb_area.mem) { |
| /* ok, another thread was faster */ |
| free_pages((unsigned long)mem, get_order(size)); |
| } else if (!mem) { |
| /* no luck */ |
| ret = -ENOMEM; |
| goto out; |
| } else { |
| /* everything ok */ |
| memset(mem, 0, size); |
| cmb_area.mem = mem; |
| cmf_activate(cmb_area.mem, 1); |
| } |
| } |
| |
| /* do the actual allocation */ |
| ret = alloc_cmb_single(cdev); |
| out: |
| spin_unlock(&cmb_area.lock); |
| |
| return ret; |
| } |
| |
| static void |
| free_cmb(struct ccw_device *cdev) |
| { |
| struct ccw_device_private *priv; |
| |
| priv = cdev->private; |
| |
| spin_lock(&cmb_area.lock); |
| spin_lock_irq(cdev->ccwlock); |
| |
| if (list_empty(&priv->cmb_list)) { |
| /* already freed */ |
| goto out; |
| } |
| |
| priv->cmb = NULL; |
| list_del_init(&priv->cmb_list); |
| |
| if (list_empty(&cmb_area.list)) { |
| ssize_t size; |
| size = sizeof(struct cmb) * cmb_area.num_channels; |
| cmf_activate(NULL, 0); |
| free_pages((unsigned long)cmb_area.mem, get_order(size)); |
| cmb_area.mem = NULL; |
| } |
| out: |
| spin_unlock_irq(cdev->ccwlock); |
| spin_unlock(&cmb_area.lock); |
| } |
| |
| static int |
| set_cmb(struct ccw_device *cdev, u32 mme) |
| { |
| u16 offset; |
| |
| if (!cdev->private->cmb) |
| return -EINVAL; |
| |
| offset = mme ? (struct cmb *)cdev->private->cmb - cmb_area.mem : 0; |
| |
| return set_schib_wait(cdev, mme, 0, offset); |
| } |
| |
| static u64 |
| read_cmb (struct ccw_device *cdev, int index) |
| { |
| /* yes, we have to put it on the stack |
| * because the cmb must only be accessed |
| * atomically, e.g. with mvc */ |
| struct cmb cmb; |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| if (!cdev->private->cmb) { |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return 0; |
| } |
| |
| cmb = *(struct cmb*)cdev->private->cmb; |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| |
| switch (index) { |
| case cmb_ssch_rsch_count: |
| return cmb.ssch_rsch_count; |
| case cmb_sample_count: |
| return cmb.sample_count; |
| case cmb_device_connect_time: |
| val = cmb.device_connect_time; |
| break; |
| case cmb_function_pending_time: |
| val = cmb.function_pending_time; |
| break; |
| case cmb_device_disconnect_time: |
| val = cmb.device_disconnect_time; |
| break; |
| case cmb_control_unit_queuing_time: |
| val = cmb.control_unit_queuing_time; |
| break; |
| case cmb_device_active_only_time: |
| val = cmb.device_active_only_time; |
| break; |
| default: |
| return 0; |
| } |
| return time_to_avg_nsec(val, cmb.sample_count); |
| } |
| |
| static int |
| readall_cmb (struct ccw_device *cdev, struct cmbdata *data) |
| { |
| /* yes, we have to put it on the stack |
| * because the cmb must only be accessed |
| * atomically, e.g. with mvc */ |
| struct cmb cmb; |
| unsigned long flags; |
| u64 time; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| if (!cdev->private->cmb) { |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return -ENODEV; |
| } |
| |
| cmb = *(struct cmb*)cdev->private->cmb; |
| time = get_clock() - cdev->private->cmb_start_time; |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| |
| memset(data, 0, sizeof(struct cmbdata)); |
| |
| /* we only know values before device_busy_time */ |
| data->size = offsetof(struct cmbdata, device_busy_time); |
| |
| /* convert to nanoseconds */ |
| data->elapsed_time = (time * 1000) >> 12; |
| |
| /* copy data to new structure */ |
| data->ssch_rsch_count = cmb.ssch_rsch_count; |
| data->sample_count = cmb.sample_count; |
| |
| /* time fields are converted to nanoseconds while copying */ |
| data->device_connect_time = time_to_nsec(cmb.device_connect_time); |
| data->function_pending_time = time_to_nsec(cmb.function_pending_time); |
| data->device_disconnect_time = time_to_nsec(cmb.device_disconnect_time); |
| data->control_unit_queuing_time |
| = time_to_nsec(cmb.control_unit_queuing_time); |
| data->device_active_only_time |
| = time_to_nsec(cmb.device_active_only_time); |
| |
| return 0; |
| } |
| |
| static void |
| reset_cmb(struct ccw_device *cdev) |
| { |
| struct cmb *cmb; |
| spin_lock_irq(cdev->ccwlock); |
| cmb = cdev->private->cmb; |
| if (cmb) |
| memset (cmb, 0, sizeof (*cmb)); |
| cdev->private->cmb_start_time = get_clock(); |
| spin_unlock_irq(cdev->ccwlock); |
| } |
| |
| static struct attribute_group cmf_attr_group; |
| |
| static struct cmb_operations cmbops_basic = { |
| .alloc = alloc_cmb, |
| .free = free_cmb, |
| .set = set_cmb, |
| .read = read_cmb, |
| .readall = readall_cmb, |
| .reset = reset_cmb, |
| .attr_group = &cmf_attr_group, |
| }; |
| |
| /* ******** extended cmb handling ********/ |
| |
| /** |
| * struct cmbe - extended channel measurement block |
| * |
| * cmb as used by the hardware, may be in any 64 bit physical location, |
| * the fields are described in z/Architecture Principles of Operation, |
| * third edition, chapter 17. |
| */ |
| struct cmbe { |
| u32 ssch_rsch_count; |
| u32 sample_count; |
| u32 device_connect_time; |
| u32 function_pending_time; |
| u32 device_disconnect_time; |
| u32 control_unit_queuing_time; |
| u32 device_active_only_time; |
| u32 device_busy_time; |
| u32 initial_command_response_time; |
| u32 reserved[7]; |
| }; |
| |
| /* kmalloc only guarantees 8 byte alignment, but we need cmbe |
| * pointers to be naturally aligned. Make sure to allocate |
| * enough space for two cmbes */ |
| static inline struct cmbe* cmbe_align(struct cmbe *c) |
| { |
| unsigned long addr; |
| addr = ((unsigned long)c + sizeof (struct cmbe) - sizeof(long)) & |
| ~(sizeof (struct cmbe) - sizeof(long)); |
| return (struct cmbe*)addr; |
| } |
| |
| static int |
| alloc_cmbe (struct ccw_device *cdev) |
| { |
| struct cmbe *cmbe; |
| cmbe = kmalloc (sizeof (*cmbe) * 2, GFP_KERNEL); |
| if (!cmbe) |
| return -ENOMEM; |
| |
| spin_lock_irq(cdev->ccwlock); |
| if (cdev->private->cmb) { |
| kfree(cmbe); |
| spin_unlock_irq(cdev->ccwlock); |
| return -EBUSY; |
| } |
| |
| cdev->private->cmb = cmbe; |
| spin_unlock_irq(cdev->ccwlock); |
| |
| /* activate global measurement if this is the first channel */ |
| spin_lock(&cmb_area.lock); |
| if (list_empty(&cmb_area.list)) |
| cmf_activate(NULL, 1); |
| list_add_tail(&cdev->private->cmb_list, &cmb_area.list); |
| spin_unlock(&cmb_area.lock); |
| |
| return 0; |
| } |
| |
| static void |
| free_cmbe (struct ccw_device *cdev) |
| { |
| spin_lock_irq(cdev->ccwlock); |
| if (cdev->private->cmb) |
| kfree(cdev->private->cmb); |
| cdev->private->cmb = NULL; |
| spin_unlock_irq(cdev->ccwlock); |
| |
| /* deactivate global measurement if this is the last channel */ |
| spin_lock(&cmb_area.lock); |
| list_del_init(&cdev->private->cmb_list); |
| if (list_empty(&cmb_area.list)) |
| cmf_activate(NULL, 0); |
| spin_unlock(&cmb_area.lock); |
| } |
| |
| static int |
| set_cmbe(struct ccw_device *cdev, u32 mme) |
| { |
| unsigned long mba; |
| |
| if (!cdev->private->cmb) |
| return -EINVAL; |
| mba = mme ? (unsigned long) cmbe_align(cdev->private->cmb) : 0; |
| |
| return set_schib_wait(cdev, mme, 1, mba); |
| } |
| |
| |
| u64 |
| read_cmbe (struct ccw_device *cdev, int index) |
| { |
| /* yes, we have to put it on the stack |
| * because the cmb must only be accessed |
| * atomically, e.g. with mvc */ |
| struct cmbe cmb; |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| if (!cdev->private->cmb) { |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return 0; |
| } |
| |
| cmb = *cmbe_align(cdev->private->cmb); |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| |
| switch (index) { |
| case cmb_ssch_rsch_count: |
| return cmb.ssch_rsch_count; |
| case cmb_sample_count: |
| return cmb.sample_count; |
| case cmb_device_connect_time: |
| val = cmb.device_connect_time; |
| break; |
| case cmb_function_pending_time: |
| val = cmb.function_pending_time; |
| break; |
| case cmb_device_disconnect_time: |
| val = cmb.device_disconnect_time; |
| break; |
| case cmb_control_unit_queuing_time: |
| val = cmb.control_unit_queuing_time; |
| break; |
| case cmb_device_active_only_time: |
| val = cmb.device_active_only_time; |
| break; |
| case cmb_device_busy_time: |
| val = cmb.device_busy_time; |
| break; |
| case cmb_initial_command_response_time: |
| val = cmb.initial_command_response_time; |
| break; |
| default: |
| return 0; |
| } |
| return time_to_avg_nsec(val, cmb.sample_count); |
| } |
| |
| static int |
| readall_cmbe (struct ccw_device *cdev, struct cmbdata *data) |
| { |
| /* yes, we have to put it on the stack |
| * because the cmb must only be accessed |
| * atomically, e.g. with mvc */ |
| struct cmbe cmb; |
| unsigned long flags; |
| u64 time; |
| |
| spin_lock_irqsave(cdev->ccwlock, flags); |
| if (!cdev->private->cmb) { |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| return -ENODEV; |
| } |
| |
| cmb = *cmbe_align(cdev->private->cmb); |
| time = get_clock() - cdev->private->cmb_start_time; |
| spin_unlock_irqrestore(cdev->ccwlock, flags); |
| |
| memset (data, 0, sizeof(struct cmbdata)); |
| |
| /* we only know values before device_busy_time */ |
| data->size = offsetof(struct cmbdata, device_busy_time); |
| |
| /* conver to nanoseconds */ |
| data->elapsed_time = (time * 1000) >> 12; |
| |
| /* copy data to new structure */ |
| data->ssch_rsch_count = cmb.ssch_rsch_count; |
| data->sample_count = cmb.sample_count; |
| |
| /* time fields are converted to nanoseconds while copying */ |
| data->device_connect_time = time_to_nsec(cmb.device_connect_time); |
| data->function_pending_time = time_to_nsec(cmb.function_pending_time); |
| data->device_disconnect_time = time_to_nsec(cmb.device_disconnect_time); |
| data->control_unit_queuing_time |
| = time_to_nsec(cmb.control_unit_queuing_time); |
| data->device_active_only_time |
| = time_to_nsec(cmb.device_active_only_time); |
| data->device_busy_time = time_to_nsec(cmb.device_busy_time); |
| data->initial_command_response_time |
| = time_to_nsec(cmb.initial_command_response_time); |
| |
| return 0; |
| } |
| |
| static void |
| reset_cmbe(struct ccw_device *cdev) |
| { |
| struct cmbe *cmb; |
| spin_lock_irq(cdev->ccwlock); |
| cmb = cmbe_align(cdev->private->cmb); |
| if (cmb) |
| memset (cmb, 0, sizeof (*cmb)); |
| cdev->private->cmb_start_time = get_clock(); |
| spin_unlock_irq(cdev->ccwlock); |
| } |
| |
| static struct attribute_group cmf_attr_group_ext; |
| |
| static struct cmb_operations cmbops_extended = { |
| .alloc = alloc_cmbe, |
| .free = free_cmbe, |
| .set = set_cmbe, |
| .read = read_cmbe, |
| .readall = readall_cmbe, |
| .reset = reset_cmbe, |
| .attr_group = &cmf_attr_group_ext, |
| }; |
| |
| |
| static ssize_t |
| cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx) |
| { |
| return sprintf(buf, "%lld\n", |
| (unsigned long long) cmf_read(to_ccwdev(dev), idx)); |
| } |
| |
| static ssize_t |
| cmb_show_avg_sample_interval(struct device *dev, char *buf) |
| { |
| struct ccw_device *cdev; |
| long interval; |
| unsigned long count; |
| |
| cdev = to_ccwdev(dev); |
| interval = get_clock() - cdev->private->cmb_start_time; |
| count = cmf_read(cdev, cmb_sample_count); |
| if (count) |
| interval /= count; |
| else |
| interval = -1; |
| return sprintf(buf, "%ld\n", interval); |
| } |
| |
| static ssize_t |
| cmb_show_avg_utilization(struct device *dev, char *buf) |
| { |
| struct cmbdata data; |
| u64 utilization; |
| unsigned long t, u; |
| int ret; |
| |
| ret = cmf_readall(to_ccwdev(dev), &data); |
| if (ret) |
| return ret; |
| |
| utilization = data.device_connect_time + |
| data.function_pending_time + |
| data.device_disconnect_time; |
| |
| /* shift to avoid long long division */ |
| while (-1ul < (data.elapsed_time | utilization)) { |
| utilization >>= 8; |
| data.elapsed_time >>= 8; |
| } |
| |
| /* calculate value in 0.1 percent units */ |
| t = (unsigned long) data.elapsed_time / 1000; |
| u = (unsigned long) utilization / t; |
| |
| return sprintf(buf, "%02ld.%01ld%%\n", u/ 10, u - (u/ 10) * 10); |
| } |
| |
| #define cmf_attr(name) \ |
| static ssize_t show_ ## name (struct device * dev, char * buf) \ |
| { return cmb_show_attr((dev), buf, cmb_ ## name); } \ |
| static DEVICE_ATTR(name, 0444, show_ ## name, NULL); |
| |
| #define cmf_attr_avg(name) \ |
| static ssize_t show_avg_ ## name (struct device * dev, char * buf) \ |
| { return cmb_show_attr((dev), buf, cmb_ ## name); } \ |
| static DEVICE_ATTR(avg_ ## name, 0444, show_avg_ ## name, NULL); |
| |
| cmf_attr(ssch_rsch_count); |
| cmf_attr(sample_count); |
| cmf_attr_avg(device_connect_time); |
| cmf_attr_avg(function_pending_time); |
| cmf_attr_avg(device_disconnect_time); |
| cmf_attr_avg(control_unit_queuing_time); |
| cmf_attr_avg(device_active_only_time); |
| cmf_attr_avg(device_busy_time); |
| cmf_attr_avg(initial_command_response_time); |
| |
| static DEVICE_ATTR(avg_sample_interval, 0444, cmb_show_avg_sample_interval, NULL); |
| static DEVICE_ATTR(avg_utilization, 0444, cmb_show_avg_utilization, NULL); |
| |
| static struct attribute *cmf_attributes[] = { |
| &dev_attr_avg_sample_interval.attr, |
| &dev_attr_avg_utilization.attr, |
| &dev_attr_ssch_rsch_count.attr, |
| &dev_attr_sample_count.attr, |
| &dev_attr_avg_device_connect_time.attr, |
| &dev_attr_avg_function_pending_time.attr, |
| &dev_attr_avg_device_disconnect_time.attr, |
| &dev_attr_avg_control_unit_queuing_time.attr, |
| &dev_attr_avg_device_active_only_time.attr, |
| 0, |
| }; |
| |
| static struct attribute_group cmf_attr_group = { |
| .name = "cmf", |
| .attrs = cmf_attributes, |
| }; |
| |
| static struct attribute *cmf_attributes_ext[] = { |
| &dev_attr_avg_sample_interval.attr, |
| &dev_attr_avg_utilization.attr, |
| &dev_attr_ssch_rsch_count.attr, |
| &dev_attr_sample_count.attr, |
| &dev_attr_avg_device_connect_time.attr, |
| &dev_attr_avg_function_pending_time.attr, |
| &dev_attr_avg_device_disconnect_time.attr, |
| &dev_attr_avg_control_unit_queuing_time.attr, |
| &dev_attr_avg_device_active_only_time.attr, |
| &dev_attr_avg_device_busy_time.attr, |
| &dev_attr_avg_initial_command_response_time.attr, |
| 0, |
| }; |
| |
| static struct attribute_group cmf_attr_group_ext = { |
| .name = "cmf", |
| .attrs = cmf_attributes_ext, |
| }; |
| |
| static ssize_t cmb_enable_show(struct device *dev, char *buf) |
| { |
| return sprintf(buf, "%d\n", to_ccwdev(dev)->private->cmb ? 1 : 0); |
| } |
| |
| static ssize_t cmb_enable_store(struct device *dev, const char *buf, size_t c) |
| { |
| struct ccw_device *cdev; |
| int ret; |
| |
| cdev = to_ccwdev(dev); |
| |
| switch (buf[0]) { |
| case '0': |
| ret = disable_cmf(cdev); |
| if (ret) |
| printk(KERN_INFO "disable_cmf failed (%d)\n", ret); |
| break; |
| case '1': |
| ret = enable_cmf(cdev); |
| if (ret && ret != -EBUSY) |
| printk(KERN_INFO "enable_cmf failed (%d)\n", ret); |
| break; |
| } |
| |
| return c; |
| } |
| |
| DEVICE_ATTR(cmb_enable, 0644, cmb_enable_show, cmb_enable_store); |
| |
| /* enable_cmf/disable_cmf: module interface for cmf (de)activation */ |
| int |
| enable_cmf(struct ccw_device *cdev) |
| { |
| int ret; |
| |
| ret = cmbops->alloc(cdev); |
| cmbops->reset(cdev); |
| if (ret) |
| return ret; |
| ret = cmbops->set(cdev, 2); |
| if (ret) { |
| cmbops->free(cdev); |
| return ret; |
| } |
| ret = sysfs_create_group(&cdev->dev.kobj, cmbops->attr_group); |
| if (!ret) |
| return 0; |
| cmbops->set(cdev, 0); //FIXME: this can fail |
| cmbops->free(cdev); |
| return ret; |
| } |
| |
| int |
| disable_cmf(struct ccw_device *cdev) |
| { |
| int ret; |
| |
| ret = cmbops->set(cdev, 0); |
| if (ret) |
| return ret; |
| cmbops->free(cdev); |
| sysfs_remove_group(&cdev->dev.kobj, cmbops->attr_group); |
| return ret; |
| } |
| |
| u64 |
| cmf_read(struct ccw_device *cdev, int index) |
| { |
| return cmbops->read(cdev, index); |
| } |
| |
| int |
| cmf_readall(struct ccw_device *cdev, struct cmbdata *data) |
| { |
| return cmbops->readall(cdev, data); |
| } |
| |
| static int __init |
| init_cmf(void) |
| { |
| char *format_string; |
| char *detect_string = "parameter"; |
| |
| /* We cannot really autoprobe this. If the user did not give a parameter, |
| see if we are running on z990 or up, otherwise fall back to basic mode. */ |
| |
| if (format == CMF_AUTODETECT) { |
| if (!css_characteristics_avail || |
| !css_general_characteristics.ext_mb) { |
| format = CMF_BASIC; |
| } else { |
| format = CMF_EXTENDED; |
| } |
| detect_string = "autodetected"; |
| } else { |
| detect_string = "parameter"; |
| } |
| |
| switch (format) { |
| case CMF_BASIC: |
| format_string = "basic"; |
| cmbops = &cmbops_basic; |
| if (cmb_area.num_channels > 4096 || cmb_area.num_channels < 1) { |
| printk(KERN_ERR "Basic channel measurement facility" |
| " can only use 1 to 4096 devices\n" |
| KERN_ERR "when the cmf driver is built" |
| " as a loadable module\n"); |
| return 1; |
| } |
| break; |
| case CMF_EXTENDED: |
| format_string = "extended"; |
| cmbops = &cmbops_extended; |
| break; |
| default: |
| printk(KERN_ERR "Invalid format %d for channel " |
| "measurement facility\n", format); |
| return 1; |
| } |
| |
| printk(KERN_INFO "Channel measurement facility using %s format (%s)\n", |
| format_string, detect_string); |
| return 0; |
| } |
| |
| module_init(init_cmf); |
| |
| |
| MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("channel measurement facility base driver\n" |
| "Copyright 2003 IBM Corporation\n"); |
| |
| EXPORT_SYMBOL_GPL(enable_cmf); |
| EXPORT_SYMBOL_GPL(disable_cmf); |
| EXPORT_SYMBOL_GPL(cmf_read); |
| EXPORT_SYMBOL_GPL(cmf_readall); |