| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1996, 97, 2000, 2001 by Ralf Baechle |
| * Copyright (C) 2001 MIPS Technologies, Inc. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/signal.h> |
| #include <linux/module.h> |
| #include <asm/branch.h> |
| #include <asm/cpu.h> |
| #include <asm/cpu-features.h> |
| #include <asm/fpu.h> |
| #include <asm/fpu_emulator.h> |
| #include <asm/inst.h> |
| #include <asm/ptrace.h> |
| #include <asm/uaccess.h> |
| |
| /* |
| * Calculate and return exception PC in case of branch delay slot |
| * for microMIPS and MIPS16e. It does not clear the ISA mode bit. |
| */ |
| int __isa_exception_epc(struct pt_regs *regs) |
| { |
| unsigned short inst; |
| long epc = regs->cp0_epc; |
| |
| /* Calculate exception PC in branch delay slot. */ |
| if (__get_user(inst, (u16 __user *) msk_isa16_mode(epc))) { |
| /* This should never happen because delay slot was checked. */ |
| force_sig(SIGSEGV, current); |
| return epc; |
| } |
| if (cpu_has_mips16) { |
| if (((union mips16e_instruction)inst).ri.opcode |
| == MIPS16e_jal_op) |
| epc += 4; |
| else |
| epc += 2; |
| } else if (mm_insn_16bit(inst)) |
| epc += 2; |
| else |
| epc += 4; |
| |
| return epc; |
| } |
| |
| /* |
| * Compute return address and emulate branch in microMIPS mode after an |
| * exception only. It does not handle compact branches/jumps and cannot |
| * be used in interrupt context. (Compact branches/jumps do not cause |
| * exceptions.) |
| */ |
| int __microMIPS_compute_return_epc(struct pt_regs *regs) |
| { |
| u16 __user *pc16; |
| u16 halfword; |
| unsigned int word; |
| unsigned long contpc; |
| struct mm_decoded_insn mminsn = { 0 }; |
| |
| mminsn.micro_mips_mode = 1; |
| |
| /* This load never faults. */ |
| pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc); |
| __get_user(halfword, pc16); |
| pc16++; |
| contpc = regs->cp0_epc + 2; |
| word = ((unsigned int)halfword << 16); |
| mminsn.pc_inc = 2; |
| |
| if (!mm_insn_16bit(halfword)) { |
| __get_user(halfword, pc16); |
| pc16++; |
| contpc = regs->cp0_epc + 4; |
| mminsn.pc_inc = 4; |
| word |= halfword; |
| } |
| mminsn.insn = word; |
| |
| if (get_user(halfword, pc16)) |
| goto sigsegv; |
| mminsn.next_pc_inc = 2; |
| word = ((unsigned int)halfword << 16); |
| |
| if (!mm_insn_16bit(halfword)) { |
| pc16++; |
| if (get_user(halfword, pc16)) |
| goto sigsegv; |
| mminsn.next_pc_inc = 4; |
| word |= halfword; |
| } |
| mminsn.next_insn = word; |
| |
| mm_isBranchInstr(regs, mminsn, &contpc); |
| |
| regs->cp0_epc = contpc; |
| |
| return 0; |
| |
| sigsegv: |
| force_sig(SIGSEGV, current); |
| return -EFAULT; |
| } |
| |
| /* |
| * Compute return address and emulate branch in MIPS16e mode after an |
| * exception only. It does not handle compact branches/jumps and cannot |
| * be used in interrupt context. (Compact branches/jumps do not cause |
| * exceptions.) |
| */ |
| int __MIPS16e_compute_return_epc(struct pt_regs *regs) |
| { |
| u16 __user *addr; |
| union mips16e_instruction inst; |
| u16 inst2; |
| u32 fullinst; |
| long epc; |
| |
| epc = regs->cp0_epc; |
| |
| /* Read the instruction. */ |
| addr = (u16 __user *)msk_isa16_mode(epc); |
| if (__get_user(inst.full, addr)) { |
| force_sig(SIGSEGV, current); |
| return -EFAULT; |
| } |
| |
| switch (inst.ri.opcode) { |
| case MIPS16e_extend_op: |
| regs->cp0_epc += 4; |
| return 0; |
| |
| /* |
| * JAL and JALX in MIPS16e mode |
| */ |
| case MIPS16e_jal_op: |
| addr += 1; |
| if (__get_user(inst2, addr)) { |
| force_sig(SIGSEGV, current); |
| return -EFAULT; |
| } |
| fullinst = ((unsigned)inst.full << 16) | inst2; |
| regs->regs[31] = epc + 6; |
| epc += 4; |
| epc >>= 28; |
| epc <<= 28; |
| /* |
| * JAL:5 X:1 TARGET[20-16]:5 TARGET[25:21]:5 TARGET[15:0]:16 |
| * |
| * ......TARGET[15:0].................TARGET[20:16]........... |
| * ......TARGET[25:21] |
| */ |
| epc |= |
| ((fullinst & 0xffff) << 2) | ((fullinst & 0x3e00000) >> 3) | |
| ((fullinst & 0x1f0000) << 7); |
| if (!inst.jal.x) |
| set_isa16_mode(epc); /* Set ISA mode bit. */ |
| regs->cp0_epc = epc; |
| return 0; |
| |
| /* |
| * J(AL)R(C) |
| */ |
| case MIPS16e_rr_op: |
| if (inst.rr.func == MIPS16e_jr_func) { |
| |
| if (inst.rr.ra) |
| regs->cp0_epc = regs->regs[31]; |
| else |
| regs->cp0_epc = |
| regs->regs[reg16to32[inst.rr.rx]]; |
| |
| if (inst.rr.l) { |
| if (inst.rr.nd) |
| regs->regs[31] = epc + 2; |
| else |
| regs->regs[31] = epc + 4; |
| } |
| return 0; |
| } |
| break; |
| } |
| |
| /* |
| * All other cases have no branch delay slot and are 16-bits. |
| * Branches do not cause an exception. |
| */ |
| regs->cp0_epc += 2; |
| |
| return 0; |
| } |
| |
| /** |
| * __compute_return_epc_for_insn - Computes the return address and do emulate |
| * branch simulation, if required. |
| * |
| * @regs: Pointer to pt_regs |
| * @insn: branch instruction to decode |
| * @returns: -EFAULT on error and forces SIGBUS, and on success |
| * returns 0 or BRANCH_LIKELY_TAKEN as appropriate after |
| * evaluating the branch. |
| */ |
| int __compute_return_epc_for_insn(struct pt_regs *regs, |
| union mips_instruction insn) |
| { |
| unsigned int bit, fcr31, dspcontrol; |
| long epc = regs->cp0_epc; |
| int ret = 0; |
| |
| switch (insn.i_format.opcode) { |
| /* |
| * jr and jalr are in r_format format. |
| */ |
| case spec_op: |
| switch (insn.r_format.func) { |
| case jalr_op: |
| regs->regs[insn.r_format.rd] = epc + 8; |
| /* Fall through */ |
| case jr_op: |
| regs->cp0_epc = regs->regs[insn.r_format.rs]; |
| break; |
| } |
| break; |
| |
| /* |
| * This group contains: |
| * bltz_op, bgez_op, bltzl_op, bgezl_op, |
| * bltzal_op, bgezal_op, bltzall_op, bgezall_op. |
| */ |
| case bcond_op: |
| switch (insn.i_format.rt) { |
| case bltz_op: |
| case bltzl_op: |
| if ((long)regs->regs[insn.i_format.rs] < 0) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == bltzl_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case bgez_op: |
| case bgezl_op: |
| if ((long)regs->regs[insn.i_format.rs] >= 0) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == bgezl_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case bltzal_op: |
| case bltzall_op: |
| regs->regs[31] = epc + 8; |
| if ((long)regs->regs[insn.i_format.rs] < 0) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == bltzall_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case bgezal_op: |
| case bgezall_op: |
| regs->regs[31] = epc + 8; |
| if ((long)regs->regs[insn.i_format.rs] >= 0) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == bgezall_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case bposge32_op: |
| if (!cpu_has_dsp) |
| goto sigill; |
| |
| dspcontrol = rddsp(0x01); |
| |
| if (dspcontrol >= 32) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| } |
| break; |
| |
| /* |
| * These are unconditional and in j_format. |
| */ |
| case jal_op: |
| regs->regs[31] = regs->cp0_epc + 8; |
| case j_op: |
| epc += 4; |
| epc >>= 28; |
| epc <<= 28; |
| epc |= (insn.j_format.target << 2); |
| regs->cp0_epc = epc; |
| if (insn.i_format.opcode == jalx_op) |
| set_isa16_mode(regs->cp0_epc); |
| break; |
| |
| /* |
| * These are conditional and in i_format. |
| */ |
| case beq_op: |
| case beql_op: |
| if (regs->regs[insn.i_format.rs] == |
| regs->regs[insn.i_format.rt]) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == beql_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case bne_op: |
| case bnel_op: |
| if (regs->regs[insn.i_format.rs] != |
| regs->regs[insn.i_format.rt]) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == bnel_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case blez_op: /* not really i_format */ |
| case blezl_op: |
| /* rt field assumed to be zero */ |
| if ((long)regs->regs[insn.i_format.rs] <= 0) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == bnel_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case bgtz_op: |
| case bgtzl_op: |
| /* rt field assumed to be zero */ |
| if ((long)regs->regs[insn.i_format.rs] > 0) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == bnel_op) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| /* |
| * And now the FPA/cp1 branch instructions. |
| */ |
| case cop1_op: |
| preempt_disable(); |
| if (is_fpu_owner()) |
| asm volatile("cfc1\t%0,$31" : "=r" (fcr31)); |
| else |
| fcr31 = current->thread.fpu.fcr31; |
| preempt_enable(); |
| |
| bit = (insn.i_format.rt >> 2); |
| bit += (bit != 0); |
| bit += 23; |
| switch (insn.i_format.rt & 3) { |
| case 0: /* bc1f */ |
| case 2: /* bc1fl */ |
| if (~fcr31 & (1 << bit)) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == 2) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| |
| case 1: /* bc1t */ |
| case 3: /* bc1tl */ |
| if (fcr31 & (1 << bit)) { |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| if (insn.i_format.rt == 3) |
| ret = BRANCH_LIKELY_TAKEN; |
| } else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| } |
| break; |
| #ifdef CONFIG_CPU_CAVIUM_OCTEON |
| case lwc2_op: /* This is bbit0 on Octeon */ |
| if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt)) |
| == 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| case ldc2_op: /* This is bbit032 on Octeon */ |
| if ((regs->regs[insn.i_format.rs] & |
| (1ull<<(insn.i_format.rt+32))) == 0) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| case swc2_op: /* This is bbit1 on Octeon */ |
| if (regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt)) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| case sdc2_op: /* This is bbit132 on Octeon */ |
| if (regs->regs[insn.i_format.rs] & |
| (1ull<<(insn.i_format.rt+32))) |
| epc = epc + 4 + (insn.i_format.simmediate << 2); |
| else |
| epc += 8; |
| regs->cp0_epc = epc; |
| break; |
| #endif |
| } |
| |
| return ret; |
| |
| sigill: |
| printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm); |
| force_sig(SIGBUS, current); |
| return -EFAULT; |
| } |
| EXPORT_SYMBOL_GPL(__compute_return_epc_for_insn); |
| |
| int __compute_return_epc(struct pt_regs *regs) |
| { |
| unsigned int __user *addr; |
| long epc; |
| union mips_instruction insn; |
| |
| epc = regs->cp0_epc; |
| if (epc & 3) |
| goto unaligned; |
| |
| /* |
| * Read the instruction |
| */ |
| addr = (unsigned int __user *) epc; |
| if (__get_user(insn.word, addr)) { |
| force_sig(SIGSEGV, current); |
| return -EFAULT; |
| } |
| |
| return __compute_return_epc_for_insn(regs, insn); |
| |
| unaligned: |
| printk("%s: unaligned epc - sending SIGBUS.\n", current->comm); |
| force_sig(SIGBUS, current); |
| return -EFAULT; |
| } |