| /* |
| Copyright (C) 2004 - 2007 rt2x00 SourceForge Project |
| <http://rt2x00.serialmonkey.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the |
| Free Software Foundation, Inc., |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| Module: rt2x00rfkill |
| Abstract: rt2x00 rfkill routines. |
| */ |
| |
| #include <linux/input-polldev.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/rfkill.h> |
| |
| #include "rt2x00.h" |
| #include "rt2x00lib.h" |
| |
| static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) |
| { |
| struct rt2x00_dev *rt2x00dev = data; |
| int retval = 0; |
| |
| if (unlikely(!rt2x00dev)) |
| return 0; |
| |
| /* |
| * Only continue if there are enabled interfaces. |
| */ |
| if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) |
| return 0; |
| |
| if (state == RFKILL_STATE_ON) { |
| INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); |
| __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); |
| retval = rt2x00lib_enable_radio(rt2x00dev); |
| } else if (state == RFKILL_STATE_OFF) { |
| INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); |
| __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); |
| rt2x00lib_disable_radio(rt2x00dev); |
| } |
| |
| return retval; |
| } |
| |
| static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev) |
| { |
| struct rt2x00_dev *rt2x00dev = poll_dev->private; |
| int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); |
| |
| if (rt2x00dev->rfkill->state != state) { |
| input_report_key(poll_dev->input, KEY_WLAN, 1); |
| input_report_key(poll_dev->input, KEY_WLAN, 0); |
| } |
| } |
| |
| void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) |
| { |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) |
| return; |
| |
| if (rfkill_register(rt2x00dev->rfkill)) { |
| ERROR(rt2x00dev, "Failed to register rfkill handler.\n"); |
| return; |
| } |
| |
| if (input_register_polled_device(rt2x00dev->poll_dev)) { |
| ERROR(rt2x00dev, "Failed to register polled device.\n"); |
| rfkill_unregister(rt2x00dev->rfkill); |
| return; |
| } |
| |
| __set_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state); |
| |
| /* |
| * Force initial poll which will detect the initial device state, |
| * and correctly sends the signal to the rfkill layer about this |
| * state. |
| */ |
| rt2x00rfkill_poll(rt2x00dev->poll_dev); |
| } |
| |
| void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) |
| { |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || |
| !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) |
| return; |
| |
| input_unregister_polled_device(rt2x00dev->poll_dev); |
| rfkill_unregister(rt2x00dev->rfkill); |
| |
| __clear_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state); |
| } |
| |
| static struct input_polled_dev * |
| rt2x00rfkill_allocate_polldev(struct rt2x00_dev *rt2x00dev) |
| { |
| struct input_polled_dev *poll_dev; |
| |
| poll_dev = input_allocate_polled_device(); |
| if (!poll_dev) |
| return NULL; |
| |
| poll_dev->private = rt2x00dev; |
| poll_dev->poll = rt2x00rfkill_poll; |
| poll_dev->poll_interval = RFKILL_POLL_INTERVAL; |
| |
| poll_dev->input->name = rt2x00dev->ops->name; |
| poll_dev->input->phys = wiphy_name(rt2x00dev->hw->wiphy); |
| poll_dev->input->id.bustype = BUS_HOST; |
| poll_dev->input->id.vendor = 0x1814; |
| poll_dev->input->id.product = rt2x00dev->chip.rt; |
| poll_dev->input->id.version = rt2x00dev->chip.rev; |
| poll_dev->input->dev.parent = wiphy_dev(rt2x00dev->hw->wiphy); |
| poll_dev->input->evbit[0] = BIT(EV_KEY); |
| set_bit(KEY_WLAN, poll_dev->input->keybit); |
| |
| return poll_dev; |
| } |
| |
| void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) |
| { |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) |
| return; |
| |
| rt2x00dev->rfkill = |
| rfkill_allocate(wiphy_dev(rt2x00dev->hw->wiphy), RFKILL_TYPE_WLAN); |
| if (!rt2x00dev->rfkill) { |
| ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n"); |
| return; |
| } |
| |
| rt2x00dev->rfkill->name = rt2x00dev->ops->name; |
| rt2x00dev->rfkill->data = rt2x00dev; |
| rt2x00dev->rfkill->state = -1; |
| rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio; |
| |
| rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev); |
| if (!rt2x00dev->poll_dev) { |
| ERROR(rt2x00dev, "Failed to allocate polled device.\n"); |
| rfkill_free(rt2x00dev->rfkill); |
| rt2x00dev->rfkill = NULL; |
| return; |
| } |
| |
| return; |
| } |
| |
| void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) |
| { |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) |
| return; |
| |
| input_free_polled_device(rt2x00dev->poll_dev); |
| rt2x00dev->poll_dev = NULL; |
| |
| rfkill_free(rt2x00dev->rfkill); |
| rt2x00dev->rfkill = NULL; |
| } |
| |
| void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev) |
| { |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) |
| return; |
| |
| input_free_polled_device(rt2x00dev->poll_dev); |
| rt2x00dev->poll_dev = NULL; |
| } |
| |
| void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev) |
| { |
| if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || |
| !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) |
| return; |
| |
| rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev); |
| if (!rt2x00dev->poll_dev) { |
| ERROR(rt2x00dev, "Failed to allocate polled device.\n"); |
| return; |
| } |
| } |