| /* |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * Copyright (C) 2012 Marek Vasut <marex@denx.de> |
| * on behalf of DENX Software Engineering GmbH |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/usb/otg.h> |
| #include <linux/stmp_device.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| |
| #define DRIVER_NAME "mxs_phy" |
| |
| #define HW_USBPHY_PWD 0x00 |
| #define HW_USBPHY_CTRL 0x30 |
| #define HW_USBPHY_CTRL_SET 0x34 |
| #define HW_USBPHY_CTRL_CLR 0x38 |
| |
| #define BM_USBPHY_CTRL_SFTRST BIT(31) |
| #define BM_USBPHY_CTRL_CLKGATE BIT(30) |
| #define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) |
| #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) |
| #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) |
| |
| struct mxs_phy { |
| struct usb_phy phy; |
| struct clk *clk; |
| }; |
| |
| #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) |
| |
| static void mxs_phy_hw_init(struct mxs_phy *mxs_phy) |
| { |
| void __iomem *base = mxs_phy->phy.io_priv; |
| |
| stmp_reset_block(base + HW_USBPHY_CTRL); |
| |
| /* Power up the PHY */ |
| writel(0, base + HW_USBPHY_PWD); |
| |
| /* enable FS/LS device */ |
| writel(BM_USBPHY_CTRL_ENUTMILEVEL2 | |
| BM_USBPHY_CTRL_ENUTMILEVEL3, |
| base + HW_USBPHY_CTRL_SET); |
| } |
| |
| static int mxs_phy_init(struct usb_phy *phy) |
| { |
| struct mxs_phy *mxs_phy = to_mxs_phy(phy); |
| |
| clk_prepare_enable(mxs_phy->clk); |
| mxs_phy_hw_init(mxs_phy); |
| |
| return 0; |
| } |
| |
| static void mxs_phy_shutdown(struct usb_phy *phy) |
| { |
| struct mxs_phy *mxs_phy = to_mxs_phy(phy); |
| |
| writel(BM_USBPHY_CTRL_CLKGATE, |
| phy->io_priv + HW_USBPHY_CTRL_SET); |
| |
| clk_disable_unprepare(mxs_phy->clk); |
| } |
| |
| static int mxs_phy_suspend(struct usb_phy *x, int suspend) |
| { |
| struct mxs_phy *mxs_phy = to_mxs_phy(x); |
| |
| if (suspend) { |
| writel(0xffffffff, x->io_priv + HW_USBPHY_PWD); |
| writel(BM_USBPHY_CTRL_CLKGATE, |
| x->io_priv + HW_USBPHY_CTRL_SET); |
| clk_disable_unprepare(mxs_phy->clk); |
| } else { |
| clk_prepare_enable(mxs_phy->clk); |
| writel(BM_USBPHY_CTRL_CLKGATE, |
| x->io_priv + HW_USBPHY_CTRL_CLR); |
| writel(0, x->io_priv + HW_USBPHY_PWD); |
| } |
| |
| return 0; |
| } |
| |
| static int mxs_phy_on_connect(struct usb_phy *phy, |
| enum usb_device_speed speed) |
| { |
| dev_dbg(phy->dev, "%s speed device has connected\n", |
| (speed == USB_SPEED_HIGH) ? "high" : "non-high"); |
| |
| if (speed == USB_SPEED_HIGH) |
| writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, |
| phy->io_priv + HW_USBPHY_CTRL_SET); |
| |
| return 0; |
| } |
| |
| static int mxs_phy_on_disconnect(struct usb_phy *phy, |
| enum usb_device_speed speed) |
| { |
| dev_dbg(phy->dev, "%s speed device has disconnected\n", |
| (speed == USB_SPEED_HIGH) ? "high" : "non-high"); |
| |
| if (speed == USB_SPEED_HIGH) |
| writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, |
| phy->io_priv + HW_USBPHY_CTRL_CLR); |
| |
| return 0; |
| } |
| |
| static int mxs_phy_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| void __iomem *base; |
| struct clk *clk; |
| struct mxs_phy *mxs_phy; |
| int ret; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "can't get device resources\n"); |
| return -ENOENT; |
| } |
| |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, |
| "can't get the clock, err=%ld", PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| |
| mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); |
| if (!mxs_phy) { |
| dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n"); |
| return -ENOMEM; |
| } |
| |
| mxs_phy->phy.io_priv = base; |
| mxs_phy->phy.dev = &pdev->dev; |
| mxs_phy->phy.label = DRIVER_NAME; |
| mxs_phy->phy.init = mxs_phy_init; |
| mxs_phy->phy.shutdown = mxs_phy_shutdown; |
| mxs_phy->phy.set_suspend = mxs_phy_suspend; |
| mxs_phy->phy.notify_connect = mxs_phy_on_connect; |
| mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; |
| |
| ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); |
| |
| mxs_phy->clk = clk; |
| |
| platform_set_drvdata(pdev, &mxs_phy->phy); |
| |
| ret = usb_add_phy_dev(&mxs_phy->phy); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mxs_phy_remove(struct platform_device *pdev) |
| { |
| struct mxs_phy *mxs_phy = platform_get_drvdata(pdev); |
| |
| usb_remove_phy(&mxs_phy->phy); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mxs_phy_dt_ids[] = { |
| { .compatible = "fsl,imx23-usbphy", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); |
| |
| static struct platform_driver mxs_phy_driver = { |
| .probe = mxs_phy_probe, |
| .remove = mxs_phy_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = mxs_phy_dt_ids, |
| }, |
| }; |
| |
| static int __init mxs_phy_module_init(void) |
| { |
| return platform_driver_register(&mxs_phy_driver); |
| } |
| postcore_initcall(mxs_phy_module_init); |
| |
| static void __exit mxs_phy_module_exit(void) |
| { |
| platform_driver_unregister(&mxs_phy_driver); |
| } |
| module_exit(mxs_phy_module_exit); |
| |
| MODULE_ALIAS("platform:mxs-usb-phy"); |
| MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); |
| MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); |
| MODULE_DESCRIPTION("Freescale MXS USB PHY driver"); |
| MODULE_LICENSE("GPL"); |