if (BF533 || BF532 || BF531) | |
source "arch/blackfin/mach-bf533/boards/Kconfig" | |
menu "BF533/2/1 Specific Configuration" | |
comment "Interrupt Priority Assignment" | |
menu "Priority" | |
config UART_ERROR | |
int "UART ERROR" | |
default 7 | |
config SPORT0_ERROR | |
int "SPORT0 ERROR" | |
default 7 | |
config SPI_ERROR | |
int "SPI ERROR" | |
default 7 | |
config SPORT1_ERROR | |
int "SPORT1 ERROR" | |
default 7 | |
config PPI_ERROR | |
int "PPI ERROR" | |
default 7 | |
config DMA_ERROR | |
int "DMA ERROR" | |
default 7 | |
config PLLWAKE_ERROR | |
int "PLL WAKEUP ERROR" | |
default 7 | |
config RTC_ERROR | |
int "RTC ERROR" | |
default 8 | |
config DMA0_PPI | |
int "DMA0 PPI" | |
default 8 | |
config DMA1_SPORT0RX | |
int "DMA1 (SPORT0 RX)" | |
default 9 | |
config DMA2_SPORT0TX | |
int "DMA2 (SPORT0 TX)" | |
default 9 | |
config DMA3_SPORT1RX | |
int "DMA3 (SPORT1 RX)" | |
default 9 | |
config DMA4_SPORT1TX | |
int "DMA4 (SPORT1 TX)" | |
default 9 | |
config DMA5_SPI | |
int "DMA5 (SPI)" | |
default 10 | |
config DMA6_UARTRX | |
int "DMA6 (UART0 RX)" | |
default 10 | |
config DMA7_UARTTX | |
int "DMA7 (UART0 TX)" | |
default 10 | |
config TIMER0 | |
int "TIMER0" | |
default 11 | |
config TIMER1 | |
int "TIMER1" | |
default 11 | |
config TIMER2 | |
int "TIMER2" | |
default 11 | |
config PFA | |
int "PF Interrupt A" | |
default 12 | |
config PFB | |
int "PF Interrupt B" | |
default 12 | |
config MEMDMA0 | |
int "MEMORY DMA0" | |
default 13 | |
config MEMDMA1 | |
int "MEMORY DMA1" | |
default 13 | |
config WDTIMER | |
int "WATCH DOG TIMER" | |
default 13 | |
help | |
Enter the priority numbers between 7-13 ONLY. Others are Reserved. | |
This applies to all the above. It is not recommended to assign the | |
highest priority number 7 to UART or any other device. | |
endmenu | |
endmenu | |
endif |