| # |
| # Multimedia Video device configuration |
| # |
| |
| menu "Video Capture Adapters" |
| depends on VIDEO_DEV |
| |
| comment "Video Capture Adapters" |
| |
| config VIDEO_ADV_DEBUG |
| bool "Enable advanced debug functionality" |
| depends on VIDEO_DEV |
| default n |
| ---help--- |
| Say Y here to enable advanced debugging functionality on some |
| V4L devices. |
| In doubt, say N. |
| |
| config VIDEO_HELPER_CHIPS_AUTO |
| bool "Autoselect pertinent encoders/decoders and other helper chips" |
| default y |
| ---help--- |
| Most video cards may require additional modules to encode or |
| decode audio/video standards. This option will autoselect |
| all pertinent modules to each selected video module. |
| |
| Unselect this only if you know exaclty what you are doing, since |
| it may break support on some boards. |
| |
| In doubt, say Y. |
| |
| # |
| # Encoder / Decoder module configuration |
| # |
| |
| menu "Encoders/decoders and other helper chips" |
| depends on VIDEO_DEV && !VIDEO_HELPER_CHIPS_AUTO |
| |
| comment "Audio Decoders" |
| |
| config VIDEO_TVAUDIO |
| tristate "Simple audio decoder chips" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for several audio decoder chips found on some bt8xx boards: |
| Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, |
| tea6320, tea6420, tda8425, ta8874z. |
| Microchip: pic16c54 based design on ProVideo PV951 board. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tvaudio. |
| |
| config VIDEO_TDA7432 |
| tristate "Philips TDA7432 audio processor chip" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for tda7432 audio decoder chip found on some bt8xx boards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tda7432. |
| |
| config VIDEO_TDA9840 |
| tristate "Philips TDA9840 audio processor chip" |
| depends on VIDEO_DEV && I2C |
| ---help--- |
| Support for tda9840 audio decoder chip found on some Zoran boards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tda9840. |
| |
| config VIDEO_TDA9875 |
| tristate "Philips TDA9875 audio processor chip" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for tda9875 audio decoder chip found on some bt8xx boards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tda9875. |
| |
| config VIDEO_TEA6415C |
| tristate "Philips TEA6415C audio processor chip" |
| depends on VIDEO_DEV && I2C |
| ---help--- |
| Support for tea6415c audio decoder chip found on some bt8xx boards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tea6415c. |
| |
| config VIDEO_TEA6420 |
| tristate "Philips TEA6420 audio processor chip" |
| depends on VIDEO_DEV && I2C |
| ---help--- |
| Support for tea6420 audio decoder chip found on some bt8xx boards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tea6420. |
| |
| config VIDEO_MSP3400 |
| tristate "Micronas MSP34xx audio decoders" |
| depends on VIDEO_V4L2 && I2C |
| ---help--- |
| Support for the Micronas MSP34xx series of audio decoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called msp3400. |
| |
| config VIDEO_CS53L32A |
| tristate "Cirrus Logic CS53L32A audio ADC" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Cirrus Logic CS53L32A low voltage |
| stereo A/D converter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cs53l32a. |
| |
| config VIDEO_TLV320AIC23B |
| tristate "Texas Instruments TLV320AIC23B audio codec" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Texas Instruments TLV320AIC23B audio codec. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tlv320aic23b. |
| |
| config VIDEO_WM8775 |
| tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Wolfson Microelectronics WM8775 high |
| performance stereo A/D Converter with a 4 channel input mixer. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wm8775. |
| |
| config VIDEO_WM8739 |
| tristate "Wolfson Microelectronics WM8739 stereo audio ADC" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Wolfson Microelectronics WM8739 |
| stereo A/D Converter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wm8739. |
| |
| comment "MPEG video encoders" |
| |
| config VIDEO_CX2341X |
| tristate "Conexant CX2341x MPEG encoders" |
| depends on VIDEO_V4L2 && EXPERIMENTAL |
| ---help--- |
| Support for the Conexant CX23416 MPEG encoders |
| and CX23415 MPEG encoder/decoders. |
| |
| This module currently supports the encoding functions only. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cx2341x. |
| |
| source "drivers/media/video/cx25840/Kconfig" |
| |
| comment "Video encoders" |
| |
| config VIDEO_SAA7127 |
| tristate "Philips SAA7127/9 digital video encoders" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Philips SAA7127/9 digital video encoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7127. |
| |
| config VIDEO_SAA7185 |
| tristate "Philips SAA7185 video encoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for the Philips SAA7185 video encoder. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7185. |
| |
| config VIDEO_ADV7170 |
| tristate "Analog Devices ADV7170 video encoder driver" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for the Analog Devices ADV7170 video encoder driver |
| |
| To compile this driver as a module, choose M here: the |
| module will be called adv7170. |
| |
| config VIDEO_ADV7175 |
| tristate "Analog Devices ADV7175 video encoder driver" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for the Analog Devices ADV7175 video encoder driver |
| |
| To compile this driver as a module, choose M here: the |
| module will be called adv7175. |
| |
| comment "Video decoders" |
| |
| config VIDEO_BT819 |
| tristate "BT819A VideoStream Decoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for BT819A video decoder. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bt819. |
| |
| config VIDEO_BT856 |
| tristate "BT856 VideoStream Decoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for BT856 video decoder. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bt856. |
| |
| config VIDEO_BT866 |
| tristate "BT866 VideoStream Decoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for BT866 video decoder. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bt866. |
| |
| config VIDEO_KS0127 |
| tristate "KS0127 video decoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for KS0127 video decoder. |
| |
| This chip is used on AverMedia AVS6EYES Zoran-based MJPEG |
| cards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ks0127. |
| |
| config VIDEO_SAA7110 |
| tristate "Philips SAA7110 video decoder" |
| depends on VIDEO_V4L1 |
| ---help--- |
| Support for the Philips SAA7110 video decoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7110. |
| |
| config VIDEO_SAA7111 |
| tristate "Philips SAA7111 video decoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for the Philips SAA711 video decoder. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7111. |
| |
| config VIDEO_SAA7114 |
| tristate "Philips SAA7114 video decoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for the Philips SAA7114 video decoder. This driver |
| is used only on Zoran driver and should be moved soon to |
| SAA711x module. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7114. |
| |
| config VIDEO_SAA711X |
| tristate "Philips SAA7113/4/5 video decoders" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Philips SAA7113/4/5 video decoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7115. |
| |
| config VIDEO_SAA7191 |
| tristate "Philips SAA7191 video decoder" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for the Philips SAA7191 video decoder. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7191. |
| |
| config VIDEO_TVP5150 |
| tristate "Texas Instruments TVP5150 video decoder" |
| depends on VIDEO_V4L2 && I2C |
| ---help--- |
| Support for the Texas Instruments TVP5150 video decoder. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tvp5150. |
| |
| config VIDEO_VPX3220 |
| tristate "vpx3220a, vpx3216b & vpx3214c video decoder driver" |
| depends on VIDEO_V4L1 && I2C |
| ---help--- |
| Support for VPX322x video decoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called vpx3220. |
| |
| comment "Video improvement chips" |
| |
| config VIDEO_UPD64031A |
| tristate "NEC Electronics uPD64031A Ghost Reduction" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the NEC Electronics uPD64031A Ghost Reduction |
| video chip. It is most often found in NTSC TV cards made for |
| Japan and is used to reduce the 'ghosting' effect that can |
| be present in analog TV broadcasts. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called upd64031a. |
| |
| config VIDEO_UPD64083 |
| tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the NEC Electronics uPD64083 3-Dimensional Y/C |
| separation video chip. It is used to improve the quality of |
| the colors of a composite signal. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called upd64083. |
| |
| endmenu # encoder / decoder chips |
| |
| config VIDEO_VIVI |
| tristate "Virtual Video Driver" |
| depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 |
| select VIDEO_BUF |
| default n |
| ---help--- |
| Enables a virtual video driver. This device shows a color bar |
| and a timestamp, as a real device would generate by using V4L2 |
| api. |
| Say Y here if you want to test video apps or debug V4L devices. |
| In doubt, say N. |
| |
| source "drivers/media/video/bt8xx/Kconfig" |
| |
| config VIDEO_SAA6588 |
| tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards" |
| depends on I2C && VIDEO_BT848 |
| |
| help |
| Support for Radio Data System (RDS) decoder. This allows seeing |
| radio station identification transmitted using this standard. |
| Currently, it works only with bt8x8 chips. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa6588. |
| |
| config VIDEO_PMS |
| tristate "Mediavision Pro Movie Studio Video For Linux" |
| depends on ISA && VIDEO_V4L1 |
| help |
| Say Y if you have such a thing. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pms. |
| |
| config VIDEO_PLANB |
| tristate "PlanB Video-In on PowerMac" |
| depends on PPC_PMAC && VIDEO_V4L1 && BROKEN |
| help |
| PlanB is the V4L driver for the PowerMac 7x00/8x00 series video |
| input hardware. If you want to experiment with this, say Y. |
| Otherwise, or if you don't understand a word, say N. See |
| <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info. |
| |
| Saying M will compile this driver as a module (planb). |
| |
| config VIDEO_BWQCAM |
| tristate "Quickcam BW Video For Linux" |
| depends on PARPORT && VIDEO_V4L1 |
| help |
| Say Y have if you the black and white version of the QuickCam |
| camera. See the next option for the color version. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bw-qcam. |
| |
| config VIDEO_CQCAM |
| tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" |
| depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1 |
| help |
| This is the video4linux driver for the colour version of the |
| Connectix QuickCam. If you have one of these cameras, say Y here, |
| otherwise say N. This driver does not work with the original |
| monochrome QuickCam, QuickCam VC or QuickClip. It is also available |
| as a module (c-qcam). |
| Read <file:Documentation/video4linux/CQcam.txt> for more information. |
| |
| config VIDEO_W9966 |
| tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" |
| depends on PARPORT_1284 && PARPORT && VIDEO_V4L1 |
| help |
| Video4linux driver for Winbond's w9966 based Webcams. |
| Currently tested with the LifeView FlyCam Supra. |
| If you have one of these cameras, say Y here |
| otherwise say N. |
| This driver is also available as a module (w9966). |
| |
| Check out <file:Documentation/video4linux/w9966.txt> for more |
| information. |
| |
| config VIDEO_CPIA |
| tristate "CPiA Video For Linux" |
| depends on VIDEO_V4L1 |
| ---help--- |
| This is the video4linux driver for cameras based on Vision's CPiA |
| (Colour Processor Interface ASIC), such as the Creative Labs Video |
| Blaster Webcam II. If you have one of these cameras, say Y here |
| and select parallel port and/or USB lowlevel support below, |
| otherwise say N. This will not work with the Creative Webcam III. |
| |
| Please read <file:Documentation/video4linux/README.cpia> for more |
| information. |
| |
| This driver is also available as a module (cpia). |
| |
| config VIDEO_CPIA_PP |
| tristate "CPiA Parallel Port Lowlevel Support" |
| depends on PARPORT_1284 && VIDEO_CPIA && PARPORT |
| help |
| This is the lowlevel parallel port support for cameras based on |
| Vision's CPiA (Colour Processor Interface ASIC), such as the |
| Creative Webcam II. If you have the parallel port version of one |
| of these cameras, say Y here, otherwise say N. It is also available |
| as a module (cpia_pp). |
| |
| config VIDEO_CPIA_USB |
| tristate "CPiA USB Lowlevel Support" |
| depends on VIDEO_CPIA && USB |
| help |
| This is the lowlevel USB support for cameras based on Vision's CPiA |
| (Colour Processor Interface ASIC), such as the Creative Webcam II. |
| If you have the USB version of one of these cameras, say Y here, |
| otherwise say N. This will not work with the Creative Webcam III. |
| It is also available as a module (cpia_usb). |
| |
| source "drivers/media/video/cpia2/Kconfig" |
| |
| config VIDEO_SAA5246A |
| tristate "SAA5246A, SAA5281 Teletext processor" |
| depends on I2C && VIDEO_V4L2 |
| help |
| Support for I2C bus based teletext using the SAA5246A or SAA5281 |
| chip. Useful only if you live in Europe. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa5246a. |
| |
| config VIDEO_SAA5249 |
| tristate "SAA5249 Teletext processor" |
| depends on VIDEO_DEV && I2C && VIDEO_V4L2 |
| help |
| Support for I2C bus based teletext using the SAA5249 chip. At the |
| moment this is only useful on some European WinTV cards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa5249. |
| |
| config TUNER_3036 |
| tristate "SAB3036 tuner" |
| depends on VIDEO_DEV && I2C && VIDEO_V4L1 |
| help |
| Say Y here to include support for Philips SAB3036 compatible tuners. |
| If in doubt, say N. |
| |
| config VIDEO_VINO |
| tristate "SGI Vino Video For Linux (EXPERIMENTAL)" |
| depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 |
| select I2C_ALGO_SGI |
| select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO |
| help |
| Say Y here to build in support for the Vino video input system found |
| on SGI Indy machines. |
| |
| config VIDEO_STRADIS |
| tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)" |
| depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64 |
| help |
| Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video |
| driver for PCI. There is a product page at |
| <http://www.stradis.com/>. |
| |
| config VIDEO_ZORAN_ZR36060 |
| tristate |
| |
| config VIDEO_ZORAN |
| tristate "Zoran ZR36057/36067 Video For Linux" |
| depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64 |
| help |
| Say Y for support for MJPEG capture cards based on the Zoran |
| 36057/36067 PCI controller chipset. This includes the Iomega |
| Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is |
| a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For |
| more information, check <file:Documentation/video4linux/Zoran>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called zr36067. |
| |
| config VIDEO_ZORAN_BUZ |
| tristate "Iomega Buz support" |
| depends on VIDEO_ZORAN |
| select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_ZORAN_ZR36060 |
| help |
| Support for the Iomega Buz MJPEG capture/playback card. |
| |
| config VIDEO_ZORAN_DC10 |
| tristate "Pinnacle/Miro DC10(+) support" |
| depends on VIDEO_ZORAN |
| select VIDEO_SAA7110 |
| select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_ZORAN_ZR36060 |
| help |
| Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback |
| card. |
| |
| config VIDEO_ZORAN_DC30 |
| tristate "Pinnacle/Miro DC30(+) support" |
| depends on VIDEO_ZORAN |
| select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO |
| help |
| Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback |
| card. This also supports really old DC10 cards based on the |
| zr36050 MJPEG codec and zr36016 VFE. |
| |
| config VIDEO_ZORAN_LML33 |
| tristate "Linux Media Labs LML33 support" |
| depends on VIDEO_ZORAN |
| select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_ZORAN_ZR36060 |
| help |
| Support for the Linux Media Labs LML33 MJPEG capture/playback |
| card. |
| |
| config VIDEO_ZORAN_LML33R10 |
| tristate "Linux Media Labs LML33R10 support" |
| depends on VIDEO_ZORAN |
| select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_ZORAN_ZR36060 |
| help |
| support for the Linux Media Labs LML33R10 MJPEG capture/playback |
| card. |
| |
| config VIDEO_ZORAN_AVS6EYES |
| tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" |
| depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1 |
| select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_ZORAN_ZR36060 |
| help |
| Support for the AverMedia 6 Eyes video surveillance card. |
| |
| config VIDEO_ZR36120 |
| tristate "Zoran ZR36120/36125 Video For Linux" |
| depends on PCI && I2C && VIDEO_V4L1 && BROKEN |
| help |
| Support for ZR36120/ZR36125 based frame grabber/overlay boards. |
| This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV, |
| and Buster boards. Please read the material in |
| <file:Documentation/video4linux/zr36120.txt> for more information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called zr36120. |
| |
| config VIDEO_MEYE |
| tristate "Sony Vaio Picturebook Motion Eye Video For Linux" |
| depends on PCI && SONYPI && VIDEO_V4L1 |
| ---help--- |
| This is the video4linux driver for the Motion Eye camera found |
| in the Vaio Picturebook laptops. Please read the material in |
| <file:Documentation/video4linux/meye.txt> for more information. |
| |
| If you say Y or M here, you need to say Y or M to "Sony Programmable |
| I/O Control Device" in the character device section. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called meye. |
| |
| source "drivers/media/video/saa7134/Kconfig" |
| |
| config VIDEO_MXB |
| tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" |
| depends on PCI && VIDEO_V4L1 && I2C |
| select VIDEO_SAA7146_VV |
| select VIDEO_TUNER |
| select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO |
| select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO |
| ---help--- |
| This is a video4linux driver for the 'Multimedia eXtension Board' |
| TV card by Siemens-Nixdorf. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mxb. |
| |
| config VIDEO_DPC |
| tristate "Philips-Semiconductors 'dpc7146 demonstration board'" |
| depends on PCI && VIDEO_V4L1 && I2C |
| select VIDEO_SAA7146_VV |
| select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO |
| ---help--- |
| This is a video4linux driver for the 'dpc7146 demonstration |
| board' by Philips-Semiconductors. It's the reference design |
| for SAA7146 bases boards, so if you have some unsupported |
| saa7146 based, analog video card, chances are good that it |
| will work with this skeleton driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called dpc7146. |
| |
| config VIDEO_HEXIUM_ORION |
| tristate "Hexium HV-PCI6 and Orion frame grabber" |
| depends on PCI && VIDEO_V4L2 && I2C |
| select VIDEO_SAA7146_VV |
| ---help--- |
| This is a video4linux driver for the Hexium HV-PCI6 and |
| Orion frame grabber cards by Hexium. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hexium_orion. |
| |
| config VIDEO_HEXIUM_GEMINI |
| tristate "Hexium Gemini frame grabber" |
| depends on PCI && VIDEO_V4L2 && I2C |
| select VIDEO_SAA7146_VV |
| ---help--- |
| This is a video4linux driver for the Hexium Gemini frame |
| grabber card by Hexium. Please note that the Gemini Dual |
| card is *not* fully supported. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hexium_gemini. |
| |
| source "drivers/media/video/cx88/Kconfig" |
| |
| config VIDEO_M32R_AR |
| tristate "AR devices" |
| depends on M32R && VIDEO_V4L1 |
| ---help--- |
| This is a video4linux driver for the Renesas AR (Artificial Retina) |
| camera module. |
| |
| config VIDEO_M32R_AR_M64278 |
| tristate "AR device with color module M64278(VGA)" |
| depends on PLAT_M32700UT |
| select VIDEO_M32R_AR |
| ---help--- |
| This is a video4linux driver for the Renesas AR (Artificial |
| Retina) with M64278E-800 camera module. |
| This module supports VGA(640x480 pixels) resolutions. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called arv. |
| |
| # |
| # USB Multimedia device configuration |
| # |
| |
| menu "V4L USB devices" |
| depends on USB && VIDEO_DEV |
| |
| source "drivers/media/video/em28xx/Kconfig" |
| |
| source "drivers/media/video/usbvideo/Kconfig" |
| |
| source "drivers/media/video/et61x251/Kconfig" |
| |
| config VIDEO_OVCAMCHIP |
| tristate "OmniVision Camera Chip support" |
| depends on I2C && VIDEO_V4L1 |
| ---help--- |
| Support for the OmniVision OV6xxx and OV7xxx series of camera chips. |
| This driver is intended to be used with the ov511 and w9968cf USB |
| camera drivers. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ovcamchip. |
| |
| config USB_W9968CF |
| tristate "USB W996[87]CF JPEG Dual Mode Camera support" |
| depends on USB && VIDEO_V4L1 && I2C |
| select VIDEO_OVCAMCHIP |
| ---help--- |
| Say Y here if you want support for cameras based on OV681 or |
| Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. |
| |
| This driver has an optional plugin, which is distributed as a |
| separate module only (released under GPL). It allows to use higher |
| resolutions and framerates, but cannot be included in the official |
| Linux kernel for performance purposes. |
| |
| See <file:Documentation/video4linux/w9968cf.txt> for more info. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w9968cf. |
| |
| config USB_OV511 |
| tristate "USB OV511 Camera support" |
| depends on USB && VIDEO_V4L1 |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. See <file:Documentation/video4linux/ov511.txt> |
| for more information and for a list of supported cameras. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ov511. |
| |
| config USB_SE401 |
| tristate "USB SE401 Camera support" |
| depends on USB && VIDEO_V4L1 |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. See <file:Documentation/video4linux/se401.txt> |
| for more information and for a list of supported cameras. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called se401. |
| |
| source "drivers/media/video/sn9c102/Kconfig" |
| |
| config USB_STV680 |
| tristate "USB STV680 (Pencam) Camera support" |
| depends on USB && VIDEO_V4L1 |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. This includes the Pencam line of cameras. |
| See <file:Documentation/video4linux/stv680.txt> for more information |
| and for a list of supported cameras. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called stv680. |
| |
| source "drivers/media/video/zc0301/Kconfig" |
| |
| source "drivers/media/video/pwc/Kconfig" |
| |
| endmenu # V4L USB devices |
| |
| endmenu |