| /* |
| * Marvell MVEBU pinctrl driver |
| * |
| * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #ifndef __PINCTRL_MVEBU_H__ |
| #define __PINCTRL_MVEBU_H__ |
| |
| /** |
| * struct mvebu_mpp_ctrl - describe a mpp control |
| * @name: name of the control group |
| * @pid: first pin id handled by this control |
| * @npins: number of pins controlled by this control |
| * @mpp_get: (optional) special function to get mpp setting |
| * @mpp_set: (optional) special function to set mpp setting |
| * @mpp_gpio_req: (optional) special function to request gpio |
| * @mpp_gpio_dir: (optional) special function to set gpio direction |
| * |
| * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or |
| * internal function, inside the SoC. Each muxable unit can be switched |
| * between two or more different settings, e.g. assign mpp pin 13 to |
| * uart1 or sata. |
| * |
| * If optional mpp_get/_set functions are set these are used to get/set |
| * a specific mode. Otherwise it is assumed that the mpp control is based |
| * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir |
| * functions can be used to allow pin settings with varying gpio pins. |
| */ |
| struct mvebu_mpp_ctrl { |
| const char *name; |
| u8 pid; |
| u8 npins; |
| unsigned *pins; |
| int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config); |
| int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config); |
| int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid); |
| int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input); |
| }; |
| |
| /** |
| * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting |
| * @val: ctrl setting value |
| * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode |
| * @subname: (optional) additional ctrl setting name, e.g. rts, cts |
| * @variant: (optional) variant identifier mask |
| * @flags: (private) flags to store gpi/gpo/gpio capabilities |
| * |
| * A ctrl_setting describes a specific internal mux function that a mpp pin |
| * can be switched to. The value (val) will be written in the corresponding |
| * register for common mpp pin configuration registers on MVEBU. SoC specific |
| * mpp_get/_set function may use val to distinguish between different settings. |
| * |
| * The name will be used to switch to this setting in DT description, e.g. |
| * marvell,function = "uart2". subname is only for debugging purposes. |
| * |
| * If name is one of "gpi", "gpo", "gpio" gpio capabilities are |
| * parsed during initialization and stored in flags. |
| * |
| * The variant can be used to combine different revisions of one SoC to a |
| * common pinctrl driver. It is matched (AND) with variant of soc_info to |
| * determine if a setting is available on the current SoC revision. |
| */ |
| struct mvebu_mpp_ctrl_setting { |
| u8 val; |
| const char *name; |
| const char *subname; |
| u8 variant; |
| u8 flags; |
| #define MVEBU_SETTING_GPO (1 << 0) |
| #define MVEBU_SETTING_GPI (1 << 1) |
| }; |
| |
| /** |
| * struct mvebu_mpp_mode - link ctrl and settings |
| * @pid: first pin id handled by this mode |
| * @settings: list of settings available for this mode |
| * |
| * A mode connects all available settings with the corresponding mpp_ctrl |
| * given by pid. |
| */ |
| struct mvebu_mpp_mode { |
| u8 pid; |
| struct mvebu_mpp_ctrl_setting *settings; |
| }; |
| |
| /** |
| * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu |
| * @variant: variant mask of soc_info |
| * @controls: list of available mvebu_mpp_ctrls |
| * @ncontrols: number of available mvebu_mpp_ctrls |
| * @modes: list of available mvebu_mpp_modes |
| * @nmodes: number of available mvebu_mpp_modes |
| * @gpioranges: list of pinctrl_gpio_ranges |
| * @ngpioranges: number of available pinctrl_gpio_ranges |
| * |
| * This struct describes all pinctrl related information for a specific SoC. |
| * If variant is unequal 0 it will be matched (AND) with variant of each |
| * setting and allows to distinguish between different revisions of one SoC. |
| */ |
| struct mvebu_pinctrl_soc_info { |
| u8 variant; |
| struct mvebu_mpp_ctrl *controls; |
| int ncontrols; |
| struct mvebu_mpp_mode *modes; |
| int nmodes; |
| struct pinctrl_gpio_range *gpioranges; |
| int ngpioranges; |
| }; |
| |
| #define MPP_REG_CTRL(_idl, _idh) \ |
| { \ |
| .name = NULL, \ |
| .pid = _idl, \ |
| .npins = _idh - _idl + 1, \ |
| .pins = (unsigned[_idh - _idl + 1]) { }, \ |
| .mpp_get = NULL, \ |
| .mpp_set = NULL, \ |
| .mpp_gpio_req = NULL, \ |
| .mpp_gpio_dir = NULL, \ |
| } |
| |
| #define MPP_FUNC_CTRL(_idl, _idh, _name, _func) \ |
| { \ |
| .name = _name, \ |
| .pid = _idl, \ |
| .npins = _idh - _idl + 1, \ |
| .pins = (unsigned[_idh - _idl + 1]) { }, \ |
| .mpp_get = _func ## _get, \ |
| .mpp_set = _func ## _set, \ |
| .mpp_gpio_req = NULL, \ |
| .mpp_gpio_dir = NULL, \ |
| } |
| |
| #define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func) \ |
| { \ |
| .name = _name, \ |
| .pid = _idl, \ |
| .npins = _idh - _idl + 1, \ |
| .pins = (unsigned[_idh - _idl + 1]) { }, \ |
| .mpp_get = _func ## _get, \ |
| .mpp_set = _func ## _set, \ |
| .mpp_gpio_req = _func ## _gpio_req, \ |
| .mpp_gpio_dir = _func ## _gpio_dir, \ |
| } |
| |
| #define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ |
| { \ |
| .val = _val, \ |
| .name = _name, \ |
| .subname = _subname, \ |
| .variant = _mask, \ |
| .flags = 0, \ |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| #define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ |
| _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) |
| #else |
| #define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ |
| _MPP_VAR_FUNCTION(_val, _name, NULL, _mask) |
| #endif |
| |
| #define MPP_FUNCTION(_val, _name, _subname) \ |
| MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1) |
| |
| #define MPP_MODE(_id, ...) \ |
| { \ |
| .pid = _id, \ |
| .settings = (struct mvebu_mpp_ctrl_setting[]){ \ |
| __VA_ARGS__, { } }, \ |
| } |
| |
| #define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \ |
| { \ |
| .name = "mvebu-gpio", \ |
| .id = _id, \ |
| .pin_base = _pinbase, \ |
| .base = _gpiobase, \ |
| .npins = _npins, \ |
| } |
| |
| int mvebu_pinctrl_probe(struct platform_device *pdev); |
| int mvebu_pinctrl_remove(struct platform_device *pdev); |
| |
| #endif |