Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
hwmon: (max6642): Better chip detection schema
hwmon: (coretemp) Further relax temperature range checks
hwmon: (coretemp) Fix TjMax detection for older CPUs
hwmon: (coretemp) Relax target temperature range check
hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index de3d246..85e9379 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -296,7 +296,7 @@
* If the TjMax is not plausible, an assumption
* will be used
*/
- if (val > 80 && val < 120) {
+ if (val) {
dev_info(dev, "TjMax is %d C.\n", val);
return val * 1000;
}
@@ -304,24 +304,9 @@
/*
* An assumption is made for early CPUs and unreadable MSR.
- * NOTE: the given value may not be correct.
+ * NOTE: the calculated value may not be correct.
*/
-
- switch (c->x86_model) {
- case 0xe:
- case 0xf:
- case 0x16:
- case 0x1a:
- dev_warn(dev, "TjMax is assumed as 100 C!\n");
- return 100000;
- case 0x17:
- case 0x1c: /* Atom CPUs */
- return adjust_tjmax(c, id, dev);
- default:
- dev_warn(dev, "CPU (model=0x%x) is not supported yet,"
- " using default TjMax of 100C.\n", c->x86_model);
- return 100000;
- }
+ return adjust_tjmax(c, id, dev);
}
static void __devinit get_ucode_rev_on_cpu(void *edx)
@@ -341,7 +326,7 @@
err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
if (!err) {
val = (eax >> 16) & 0xff;
- if (val > 80 && val < 120)
+ if (val)
return val * 1000;
}
dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu);
diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c
index 0f9fc40..e855d3b 100644
--- a/drivers/hwmon/max6642.c
+++ b/drivers/hwmon/max6642.c
@@ -136,15 +136,29 @@
if (man_id != 0x4D)
return -ENODEV;
+ /* sanity check */
+ if (i2c_smbus_read_byte_data(client, 0x04) != 0x4D
+ || i2c_smbus_read_byte_data(client, 0x06) != 0x4D
+ || i2c_smbus_read_byte_data(client, 0xff) != 0x4D)
+ return -ENODEV;
+
/*
* We read the config and status register, the 4 lower bits in the
* config register should be zero and bit 5, 3, 1 and 0 should be
* zero in the status register.
*/
reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG);
+ if ((reg_config & 0x0f) != 0x00)
+ return -ENODEV;
+
+ /* in between, another round of sanity checks */
+ if (i2c_smbus_read_byte_data(client, 0x04) != reg_config
+ || i2c_smbus_read_byte_data(client, 0x06) != reg_config
+ || i2c_smbus_read_byte_data(client, 0xff) != reg_config)
+ return -ENODEV;
+
reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS);
- if (((reg_config & 0x0f) != 0x00) ||
- ((reg_status & 0x2b) != 0x00))
+ if ((reg_status & 0x2b) != 0x00)
return -ENODEV;
strlcpy(info->type, "max6642", I2C_NAME_SIZE);
@@ -246,7 +260,7 @@
set_temp_max, 0, MAX6642_REG_W_LOCAL_HIGH);
static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
set_temp_max, 1, MAX6642_REG_W_REMOTE_HIGH);
-static SENSOR_DEVICE_ATTR(temp_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
@@ -256,7 +270,7 @@
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
- &sensor_dev_attr_temp_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
NULL
