| # |
| # X86 Platform Specific Drivers |
| # |
| |
| menuconfig X86_PLATFORM_DEVICES |
| bool "X86 Platform Specific Device Drivers" |
| default y |
| ---help--- |
| Say Y here to get to see options for device drivers for various |
| x86 platforms, including vendor-specific laptop extension drivers. |
| This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if X86_PLATFORM_DEVICES |
| |
| config ACER_WMI |
| tristate "Acer WMI Laptop Extras" |
| depends on ACPI |
| depends on LEDS_CLASS |
| depends on NEW_LEDS |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on SERIO_I8042 |
| depends on RFKILL || RFKILL = n |
| select ACPI_WMI |
| ---help--- |
| This is a driver for newer Acer (and Wistron) laptops. It adds |
| wireless radio and bluetooth control, and on some laptops, |
| exposes the mail LED and LCD backlight. |
| |
| For more information about this driver see |
| <file:Documentation/laptops/acer-wmi.txt> |
| |
| If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M |
| here. |
| |
| config ACERHDF |
| tristate "Acer Aspire One temperature and fan driver" |
| depends on THERMAL && THERMAL_HWMON && ACPI |
| ---help--- |
| This is a driver for Acer Aspire One netbooks. It allows to access |
| the temperature sensor and to control the fan. |
| |
| After loading this driver the BIOS is still in control of the fan. |
| To let the kernel handle the fan, do: |
| echo -n enabled > /sys/class/thermal/thermal_zone0/mode |
| |
| For more information about this driver see |
| <http://piie.net/files/acerhdf_README.txt> |
| |
| If you have an Acer Aspire One netbook, say Y or M |
| here. |
| |
| config ASUS_LAPTOP |
| tristate "Asus Laptop Extras" |
| depends on ACPI |
| depends on !ACPI_ASUS |
| select LEDS_CLASS |
| select NEW_LEDS |
| select BACKLIGHT_CLASS_DEVICE |
| depends on INPUT |
| ---help--- |
| This is the new Linux driver for Asus laptops. It may also support some |
| MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate |
| standard ACPI events and input events. It also adds |
| support for video output switching, LCD backlight control, Bluetooth and |
| Wlan control, and most importantly, allows you to blink those fancy LEDs. |
| |
| For more information and a userspace daemon for handling the extra |
| buttons see <http://acpi4asus.sf.net>. |
| |
| If you have an ACPI-compatible ASUS laptop, say Y or M here. |
| |
| config DELL_LAPTOP |
| tristate "Dell Laptop Extras (EXPERIMENTAL)" |
| depends on X86 |
| depends on DCDBAS |
| depends on EXPERIMENTAL |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on RFKILL || RFKILL = n |
| depends on POWER_SUPPLY |
| depends on SERIO_I8042 |
| default n |
| ---help--- |
| This driver adds support for rfkill and backlight control to Dell |
| laptops. |
| |
| config DELL_WMI |
| tristate "Dell WMI extras" |
| depends on ACPI_WMI |
| depends on INPUT |
| ---help--- |
| Say Y here if you want to support WMI-based hotkeys on Dell laptops. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called dell-wmi. |
| |
| config FUJITSU_LAPTOP |
| tristate "Fujitsu Laptop Extras" |
| depends on ACPI |
| depends on INPUT |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on LEDS_CLASS || LEDS_CLASS=n |
| ---help--- |
| This is a driver for laptops built by Fujitsu: |
| |
| * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks |
| * Possibly other Fujitsu laptop models |
| * Tested with S6410 and S7020 |
| |
| It adds support for LCD brightness control and some hotkeys. |
| |
| If you have a Fujitsu laptop, say Y or M here. |
| |
| config FUJITSU_LAPTOP_DEBUG |
| bool "Verbose debug mode for Fujitsu Laptop Extras" |
| depends on FUJITSU_LAPTOP |
| default n |
| ---help--- |
| Enables extra debug output from the fujitsu extras driver, at the |
| expense of a slight increase in driver size. |
| |
| If you are not sure, say N here. |
| |
| config TC1100_WMI |
| tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)" |
| depends on !X86_64 |
| depends on EXPERIMENTAL |
| depends on ACPI |
| select ACPI_WMI |
| ---help--- |
| This is a driver for the WMI extensions (wireless and bluetooth power |
| control) of the HP Compaq TC1100 tablet. |
| |
| config HP_WMI |
| tristate "HP WMI extras" |
| depends on ACPI_WMI |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| help |
| Say Y here if you want to support WMI-based hotkeys on HP laptops and |
| to read data from WMI such as docking or ambient light sensor state. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called hp-wmi. |
| |
| config MSI_LAPTOP |
| tristate "MSI Laptop Extras" |
| depends on ACPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| ---help--- |
| This is a driver for laptops built by MSI (MICRO-STAR |
| INTERNATIONAL): |
| |
| MSI MegaBook S270 (MS-1013) |
| Cytron/TCM/Medion/Tchibo MD96100/SAM2000 |
| |
| It adds support for Bluetooth, WLAN and LCD brightness control. |
| |
| More information about this driver is available at |
| <http://0pointer.de/lennart/tchibo.html>. |
| |
| If you have an MSI S270 laptop, say Y or M here. |
| |
| config PANASONIC_LAPTOP |
| tristate "Panasonic Laptop Extras" |
| depends on INPUT && ACPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| ---help--- |
| This driver adds support for access to backlight control and hotkeys |
| on Panasonic Let's Note laptops. |
| |
| If you have a Panasonic Let's note laptop (such as the R1(N variant), |
| R2, R3, R5, T2, W2 and Y2 series), say Y. |
| |
| config COMPAL_LAPTOP |
| tristate "Compal Laptop Extras" |
| depends on ACPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| ---help--- |
| This is a driver for laptops built by Compal: |
| |
| Compal FL90/IFL90 |
| Compal FL91/IFL91 |
| Compal FL92/JFL92 |
| Compal FT00/IFT00 |
| |
| It adds support for Bluetooth, WLAN and LCD brightness control. |
| |
| If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here. |
| |
| config SONY_LAPTOP |
| tristate "Sony Laptop Extras" |
| depends on ACPI |
| select BACKLIGHT_CLASS_DEVICE |
| depends on INPUT |
| depends on RFKILL |
| ---help--- |
| This mini-driver drives the SNC and SPIC devices present in the ACPI |
| BIOS of the Sony Vaio laptops. |
| |
| It gives access to some extra laptop functionalities like Bluetooth, |
| screen brightness control, Fn keys and allows powering on/off some |
| devices. |
| |
| Read <file:Documentation/laptops/sony-laptop.txt> for more information. |
| |
| config SONYPI_COMPAT |
| bool "Sonypi compatibility" |
| depends on SONY_LAPTOP |
| ---help--- |
| Build the sonypi driver compatibility code into the sony-laptop driver. |
| |
| config THINKPAD_ACPI |
| tristate "ThinkPad ACPI Laptop Extras" |
| depends on ACPI |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| select BACKLIGHT_LCD_SUPPORT |
| select BACKLIGHT_CLASS_DEVICE |
| select HWMON |
| select NVRAM |
| select NEW_LEDS |
| select LEDS_CLASS |
| ---help--- |
| This is a driver for the IBM and Lenovo ThinkPad laptops. It adds |
| support for Fn-Fx key combinations, Bluetooth control, video |
| output switching, ThinkLight control, UltraBay eject and more. |
| For more information about this driver see |
| <file:Documentation/laptops/thinkpad-acpi.txt> and |
| <http://ibm-acpi.sf.net/> . |
| |
| This driver was formerly known as ibm-acpi. |
| |
| Extra functionality will be available if the rfkill (CONFIG_RFKILL) |
| and/or ALSA (CONFIG_SND) subsystems are available in the kernel. |
| Note that if you want ThinkPad-ACPI to be built-in instead of |
| modular, ALSA and rfkill will also have to be built-in. |
| |
| If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. |
| |
| config THINKPAD_ACPI_ALSA_SUPPORT |
| bool "Console audio control ALSA interface" |
| depends on THINKPAD_ACPI |
| depends on SND |
| depends on SND = y || THINKPAD_ACPI = SND |
| default y |
| ---help--- |
| Enables monitoring of the built-in console audio output control |
| (headphone and speakers), which is operated by the mute and (in |
| some ThinkPad models) volume hotkeys. |
| |
| If this option is enabled, ThinkPad-ACPI will export an ALSA card |
| with a single read-only mixer control, which should be used for |
| on-screen-display feedback purposes by the Desktop Environment. |
| |
| Optionally, the driver will also allow software control (the |
| ALSA mixer will be made read-write). Please refer to the driver |
| documentation for details. |
| |
| All IBM models have both volume and mute control. Newer Lenovo |
| models only have mute control (the volume hotkeys are just normal |
| keys and volume control is done through the main HDA mixer). |
| |
| config THINKPAD_ACPI_DEBUGFACILITIES |
| bool "Maintainer debug facilities" |
| depends on THINKPAD_ACPI |
| default n |
| ---help--- |
| Enables extra stuff in the thinkpad-acpi which is completely useless |
| for normal use. Read the driver source to find out what it does. |
| |
| Say N here, unless you were told by a kernel maintainer to do |
| otherwise. |
| |
| config THINKPAD_ACPI_DEBUG |
| bool "Verbose debug mode" |
| depends on THINKPAD_ACPI |
| default n |
| ---help--- |
| Enables extra debugging information, at the expense of a slightly |
| increase in driver size. |
| |
| If you are not sure, say N here. |
| |
| config THINKPAD_ACPI_UNSAFE_LEDS |
| bool "Allow control of important LEDs (unsafe)" |
| depends on THINKPAD_ACPI |
| default n |
| ---help--- |
| Overriding LED state on ThinkPads can mask important |
| firmware alerts (like critical battery condition), or misled |
| the user into damaging the hardware (undocking or ejecting |
| the bay while buses are still active), etc. |
| |
| LED control on the ThinkPad is write-only (with very few |
| exceptions on very ancient models), which makes it |
| impossible to know beforehand if important information will |
| be lost when one changes LED state. |
| |
| Users that know what they are doing can enable this option |
| and the driver will allow control of every LED, including |
| the ones on the dock stations. |
| |
| Never enable this option on a distribution kernel. |
| |
| Say N here, unless you are building a kernel for your own |
| use, and need to control the important firmware LEDs. |
| |
| config THINKPAD_ACPI_VIDEO |
| bool "Video output control support" |
| depends on THINKPAD_ACPI |
| default y |
| ---help--- |
| Allows the thinkpad_acpi driver to provide an interface to control |
| the various video output ports. |
| |
| This feature often won't work well, depending on ThinkPad model, |
| display state, video output devices in use, whether there is a X |
| server running, phase of the moon, and the current mood of |
| Schroedinger's cat. If you can use X.org's RandR to control |
| your ThinkPad's video output ports instead of this feature, |
| don't think twice: do it and say N here to save some memory. |
| |
| If you are not sure, say Y here. |
| |
| config THINKPAD_ACPI_HOTKEY_POLL |
| bool "Support NVRAM polling for hot keys" |
| depends on THINKPAD_ACPI |
| default y |
| ---help--- |
| Some thinkpad models benefit from NVRAM polling to detect a few of |
| the hot key press events. If you know your ThinkPad model does not |
| need to do NVRAM polling to support any of the hot keys you use, |
| unselecting this option will save about 1kB of memory. |
| |
| ThinkPads T40 and newer, R52 and newer, and X31 and newer are |
| unlikely to need NVRAM polling in their latest BIOS versions. |
| |
| NVRAM polling can detect at most the following keys: ThinkPad/Access |
| IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute, |
| Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12). |
| |
| If you are not sure, say Y here. The driver enables polling only if |
| it is strictly necessary to do so. |
| |
| config INTEL_MENLOW |
| tristate "Thermal Management driver for Intel menlow platform" |
| depends on ACPI_THERMAL |
| select THERMAL |
| ---help--- |
| ACPI thermal management enhancement driver on |
| Intel Menlow platform. |
| |
| If unsure, say N. |
| |
| config EEEPC_LAPTOP |
| tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" |
| depends on ACPI |
| depends on INPUT |
| depends on EXPERIMENTAL |
| depends on RFKILL || RFKILL = n |
| depends on HOTPLUG_PCI |
| select BACKLIGHT_CLASS_DEVICE |
| select HWMON |
| select LEDS_CLASS |
| select NEW_LEDS |
| select INPUT_SPARSEKMAP |
| ---help--- |
| This driver supports the Fn-Fx keys on Eee PC laptops. |
| |
| It also gives access to some extra laptop functionalities like |
| Bluetooth, backlight and allows powering on/off some other |
| devices. |
| |
| If you have an Eee PC laptop, say Y or M here. |
| |
| |
| config ACPI_WMI |
| tristate "WMI" |
| depends on ACPI |
| help |
| This driver adds support for the ACPI-WMI (Windows Management |
| Instrumentation) mapper device (PNP0C14) found on some systems. |
| |
| ACPI-WMI is a proprietary extension to ACPI to expose parts of the |
| ACPI firmware to userspace - this is done through various vendor |
| defined methods and data blocks in a PNP0C14 device, which are then |
| made available for userspace to call. |
| |
| The implementation of this in Linux currently only exposes this to |
| other kernel space drivers. |
| |
| This driver is a required dependency to build the firmware specific |
| drivers needed on many machines, including Acer and HP laptops. |
| |
| It is safe to enable this driver even if your DSDT doesn't define |
| any ACPI-WMI devices. |
| |
| config MSI_WMI |
| tristate "MSI WMI extras" |
| depends on ACPI_WMI |
| depends on INPUT |
| depends on BACKLIGHT_CLASS_DEVICE |
| select INPUT_SPARSEKMAP |
| help |
| Say Y here if you want to support WMI-based hotkeys on MSI laptops. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called msi-wmi. |
| |
| config ACPI_ASUS |
| tristate "ASUS/Medion Laptop Extras (DEPRECATED)" |
| depends on ACPI |
| select BACKLIGHT_CLASS_DEVICE |
| ---help--- |
| This driver provides support for extra features of ACPI-compatible |
| ASUS laptops. As some of Medion laptops are made by ASUS, it may also |
| support some Medion laptops (such as 9675 for example). It makes all |
| the extra buttons generate standard ACPI events that go through |
| /proc/acpi/events, and (on some models) adds support for changing the |
| display brightness and output, switching the LCD backlight on and off, |
| and most importantly, allows you to blink those fancy LEDs intended |
| for reporting mail and wireless status. |
| |
| Note: display switching code is currently considered EXPERIMENTAL, |
| toying with these values may even lock your machine. |
| |
| All settings are changed via /proc/acpi/asus directory entries. Owner |
| and group for these entries can be set with asus_uid and asus_gid |
| parameters. |
| |
| More information and a userspace daemon for handling the extra buttons |
| at <http://acpi4asus.sf.net>. |
| |
| If you have an ACPI-compatible ASUS laptop, say Y or M here. This |
| driver is still under development, so if your laptop is unsupported or |
| something works not quite as expected, please use the mailing list |
| available on the above page (acpi4asus-user@lists.sourceforge.net). |
| |
| NOTE: This driver is deprecated and will probably be removed soon, |
| use asus-laptop instead. |
| |
| config TOPSTAR_LAPTOP |
| tristate "Topstar Laptop Extras" |
| depends on ACPI |
| depends on INPUT |
| ---help--- |
| This driver adds support for hotkeys found on Topstar laptops. |
| |
| If you have a Topstar laptop, say Y or M here. |
| |
| config ACPI_TOSHIBA |
| tristate "Toshiba Laptop Extras" |
| depends on ACPI |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| select INPUT_POLLDEV |
| select BACKLIGHT_CLASS_DEVICE |
| ---help--- |
| This driver adds support for access to certain system settings |
| on "legacy free" Toshiba laptops. These laptops can be recognized by |
| their lack of a BIOS setup menu and APM support. |
| |
| On these machines, all system configuration is handled through the |
| ACPI. This driver is required for access to controls not covered |
| by the general ACPI drivers, such as LCD brightness, video output, |
| etc. |
| |
| This driver differs from the non-ACPI Toshiba laptop driver (located |
| under "Processor type and features") in several aspects. |
| Configuration is accessed by reading and writing text files in the |
| /proc tree instead of by program interface to /dev. Furthermore, no |
| power management functions are exposed, as those are handled by the |
| general ACPI drivers. |
| |
| More information about this driver is available at |
| <http://memebeam.org/toys/ToshibaAcpiDriver>. |
| |
| If you have a legacy free Toshiba laptop (such as the Libretto L1 |
| series), say Y. |
| |
| config TOSHIBA_BT_RFKILL |
| tristate "Toshiba Bluetooth RFKill switch support" |
| depends on ACPI |
| ---help--- |
| This driver adds support for Bluetooth events for the RFKill |
| switch on modern Toshiba laptops with full ACPI support and |
| an RFKill switch. |
| |
| This driver handles RFKill events for the TOS6205 Bluetooth, |
| and re-enables it when the switch is set back to the 'on' |
| position. |
| |
| If you have a modern Toshiba laptop with a Bluetooth and an |
| RFKill switch (such as the Portege R500), say Y. |
| |
| config ACPI_CMPC |
| tristate "CMPC Laptop Extras" |
| depends on X86 && ACPI |
| select INPUT |
| select BACKLIGHT_CLASS_DEVICE |
| default n |
| help |
| Support for Intel Classmate PC ACPI devices, including some |
| keys as input device, backlight device, tablet and accelerometer |
| devices. |
| |
| endif # X86_PLATFORM_DEVICES |
