arch/arm/kernel/kprobes-test.h - maze/linux - Git at Google

 /*
  * arch/arm/kernel/kprobes-test.h
  *
  * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #define VERBOSE 0 /* Set to '1' for more logging of test cases */

 #ifdef CONFIG_THUMB2_KERNEL
 #define NORMAL_ISA "16"
 #else
 #define NORMAL_ISA "32"
 #endif


 /* Flags used in kprobe_test_flags */
 #define TEST_FLAG_NO_ITBLOCK	(1<<0)
 #define TEST_FLAG_FULL_ITBLOCK	(1<<1)
 #define TEST_FLAG_NARROW_INSTR	(1<<2)

 extern int kprobe_test_flags;
 extern int kprobe_test_cc_position;


 #define TEST_MEMORY_SIZE 256


 /*
  * Test case structures.
  *
  * The arguments given to test cases can be one of three types.
  *
  *   ARG_TYPE_REG
  *	Load a register with the given value.
  *
  *   ARG_TYPE_PTR
  *	Load a register with a pointer into the stack buffer (SP + given value).
  *
  *   ARG_TYPE_MEM
  *	Store the given value into the stack buffer at [SP+index].
  *
  */

 #define	ARG_TYPE_END	0
 #define	ARG_TYPE_REG	1
 #define	ARG_TYPE_PTR	2
 #define	ARG_TYPE_MEM	3

 #define ARG_FLAG_UNSUPPORTED	0x01
 #define ARG_FLAG_SUPPORTED	0x02
 #define ARG_FLAG_THUMB		0x10	/* Must be 16 so TEST_ISA can be used */
 #define ARG_FLAG_ARM		0x20	/* Must be 32 so TEST_ISA can be used */

 struct test_arg {
 	u8	type;		/* ARG_TYPE_x */
 	u8	_padding[7];
 };

 struct test_arg_regptr {
 	u8	type;		/* ARG_TYPE_REG or ARG_TYPE_PTR */
 	u8	reg;
 	u8	_padding[2];
 	u32	val;
 };

 struct test_arg_mem {
 	u8	type;		/* ARG_TYPE_MEM */
 	u8	index;
 	u8	_padding[2];
 	u32	val;
 };

 struct test_arg_end {
 	u8	type;		/* ARG_TYPE_END */
 	u8	flags;		/* ARG_FLAG_x */
 	u16	code_offset;
 	u16	branch_offset;
 	u16	end_offset;
 };


 /*
  * Building blocks for test cases.
  *
  * Each test case is wrapped between TESTCASE_START and TESTCASE_END.
  *
  * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
  * used followed by a terminating TEST_ARG_END.
  *
  * After this, the instruction to be tested is defined with TEST_INSTRUCTION.
  * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
  *
  * Some specific test cases may make use of other custom constructs.
  */

 #if VERBOSE
 #define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
 #else
 #define verbose(fmt, ...)
 #endif

 #define TEST_GROUP(title)					\
 	verbose("\n");						\
 	verbose(title"\n");					\
 	verbose("---------------------------------------------------------\n");

 #define TESTCASE_START(title)					\
 	__asm__ __volatile__ (					\
 	"bl	__kprobes_test_case_start		\n\t"	\
 	/* don't use .asciz here as 'title' may be */		\
 	/* multiple strings to be concatenated.  */		\
 	".ascii "#title"				\n\t"	\
 	".byte	0					\n\t"	\
 	".align	2					\n\t"

 #define	TEST_ARG_REG(reg, val)					\
 	".byte	"__stringify(ARG_TYPE_REG)"		\n\t"	\
 	".byte	"#reg"					\n\t"	\
 	".short	0					\n\t"	\
 	".word	"#val"					\n\t"

 #define	TEST_ARG_PTR(reg, val)					\
 	".byte	"__stringify(ARG_TYPE_PTR)"		\n\t"	\
 	".byte	"#reg"					\n\t"	\
 	".short	0					\n\t"	\
 	".word	"#val"					\n\t"

 #define	TEST_ARG_MEM(index, val)				\
 	".byte	"__stringify(ARG_TYPE_MEM)"		\n\t"	\
 	".byte	"#index"				\n\t"	\
 	".short	0					\n\t"	\
 	".word	"#val"					\n\t"

 #define	TEST_ARG_END(flags)					\
 	".byte	"__stringify(ARG_TYPE_END)"		\n\t"	\
 	".byte	"TEST_ISA flags"			\n\t"	\
 	".short	50f-0f					\n\t"	\
 	".short	2f-0f					\n\t"	\
 	".short	99f-0f					\n\t"	\
 	".code "TEST_ISA"				\n\t"	\
 	"0:						\n\t"

 #define TEST_INSTRUCTION(instruction)				\
 	"50:	nop					\n\t"	\
 	"1:	"instruction"				\n\t"	\
 	"	nop					\n\t"

 #define TEST_BRANCH_F(instruction, xtra_dist)			\
 	TEST_INSTRUCTION(instruction)				\
 	".if "#xtra_dist"				\n\t"	\
 	"	b	99f				\n\t"	\
 	".space "#xtra_dist"				\n\t"	\
 	".endif						\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"

 #define TEST_BRANCH_B(instruction, xtra_dist)			\
 	"	b	50f				\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"	\
 	"	b	99f				\n\t"	\
 	".if "#xtra_dist"				\n\t"	\
 	".space "#xtra_dist"				\n\t"	\
 	".endif						\n\t"	\
 	TEST_INSTRUCTION(instruction)

 #define TESTCASE_END						\
 	"2:						\n\t"	\
 	"99:						\n\t"	\
 	"	bl __kprobes_test_case_end_"TEST_ISA"	\n\t"	\
 	".code "NORMAL_ISA"				\n\t"	\
 	: :							\
 	: "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc"	\
 	);


 /*
  * Macros to define test cases.
  *
  * Those of the form TEST_{R,P,M}* can be used to define test cases
  * which take combinations of the three basic types of arguments. E.g.
  *
  *   TEST_R	One register argument
  *   TEST_RR	Two register arguments
  *   TEST_RPR	A register, a pointer, then a register argument
  *
  * For testing instructions which may branch, there are macros TEST_BF_*
  * and TEST_BB_* for branching forwards and backwards.
  *
  * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
  * the just verify that a kprobe is or is not allowed on the given instruction.
  */

 #define TEST(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
 	TEST_INSTRUCTION(code)			\
 	TESTCASE_END

 #define TEST_UNSUPPORTED(code)					\
 	TESTCASE_START(code)					\
 	TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED))	\
 	TEST_INSTRUCTION(code)					\
 	TESTCASE_END

 #define TEST_SUPPORTED(code)					\
 	TESTCASE_START(code)					\
 	TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED))	\
 	TEST_INSTRUCTION(code)					\
 	TESTCASE_END

 #define TEST_R(code1, reg, val, code2)			\
 	TESTCASE_START(code1 #reg code2)		\
 	TEST_ARG_REG(reg, val)				\
 	TEST_ARG_END("")				\
 	TEST_INSTRUCTION(code1 #reg code2)		\
 	TESTCASE_END

 #define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_REG(reg1, val1)				\
 	TEST_ARG_REG(reg2, val2)				\
 	TEST_ARG_END("")					\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)		\
 	TESTCASE_END

 #define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TEST_ARG_REG(reg1, val1)						\
 	TEST_ARG_REG(reg2, val2)						\
 	TEST_ARG_REG(reg3, val3)						\
 	TEST_ARG_END("")							\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TESTCASE_END

 #define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4)		\
 	TEST_ARG_REG(reg1, val1)						\
 	TEST_ARG_REG(reg2, val2)						\
 	TEST_ARG_REG(reg3, val3)						\
 	TEST_ARG_REG(reg4, val4)						\
 	TEST_ARG_END("")							\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4)	\
 	TESTCASE_END

 #define TEST_P(code1, reg1, val1, code2)	\
 	TESTCASE_START(code1 #reg1 code2)	\
 	TEST_ARG_PTR(reg1, val1)		\
 	TEST_ARG_END("")			\
 	TEST_INSTRUCTION(code1 #reg1 code2)	\
 	TESTCASE_END

 #define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_PTR(reg1, val1)				\
 	TEST_ARG_REG(reg2, val2)				\
 	TEST_ARG_END("")					\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)		\
 	TESTCASE_END

 #define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_REG(reg1, val1)				\
 	TEST_ARG_PTR(reg2, val2)				\
 	TEST_ARG_END("")					\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)		\
 	TESTCASE_END

 #define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TEST_ARG_PTR(reg1, val1)						\
 	TEST_ARG_REG(reg2, val2)						\
 	TEST_ARG_REG(reg3, val3)						\
 	TEST_ARG_END("")							\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TESTCASE_END

 #define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TEST_ARG_REG(reg1, val1)						\
 	TEST_ARG_PTR(reg2, val2)						\
 	TEST_ARG_REG(reg3, val3)						\
 	TEST_ARG_END("")							\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TESTCASE_END

 #define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TEST_ARG_REG(reg1, val1)						\
 	TEST_ARG_REG(reg2, val2)						\
 	TEST_ARG_PTR(reg3, val3)						\
 	TEST_ARG_END("")							\
 	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
 	TESTCASE_END

 #define TEST_BF_P(code1, reg1, val1, code2)	\
 	TESTCASE_START(code1 #reg1 code2)	\
 	TEST_ARG_PTR(reg1, val1)		\
 	TEST_ARG_END("")			\
 	TEST_BRANCH_F(code1 #reg1 code2, 0)	\
 	TESTCASE_END

 #define TEST_BF_X(code, xtra_dist)		\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
 	TEST_BRANCH_F(code, xtra_dist)		\
 	TESTCASE_END

 #define TEST_BB_X(code, xtra_dist)		\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
 	TEST_BRANCH_B(code, xtra_dist)		\
 	TESTCASE_END

 #define TEST_BF_RX(code1, reg, val, code2, xtra_dist)	\
 	TESTCASE_START(code1 #reg code2)		\
 	TEST_ARG_REG(reg, val)				\
 	TEST_ARG_END("")				\
 	TEST_BRANCH_F(code1 #reg code2, xtra_dist)	\
 	TESTCASE_END

 #define TEST_BB_RX(code1, reg, val, code2, xtra_dist)	\
 	TESTCASE_START(code1 #reg code2)		\
 	TEST_ARG_REG(reg, val)				\
 	TEST_ARG_END("")				\
 	TEST_BRANCH_B(code1 #reg code2, xtra_dist)	\
 	TESTCASE_END

 #define TEST_BF(code)	TEST_BF_X(code, 0)
 #define TEST_BB(code)	TEST_BB_X(code, 0)

 #define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
 #define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)

 #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_REG(reg1, val1)				\
 	TEST_ARG_REG(reg2, val2)				\
 	TEST_ARG_END("")					\
 	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0)		\
 	TESTCASE_END

 #define TEST_X(code, codex)			\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
 	TEST_INSTRUCTION(code)			\
 	"	b	99f		\n\t"	\
 	"	"codex"			\n\t"	\
 	TESTCASE_END

 #define TEST_RX(code1, reg, val, code2, codex)		\
 	TESTCASE_START(code1 #reg code2)		\
 	TEST_ARG_REG(reg, val)				\
 	TEST_ARG_END("")				\
 	TEST_INSTRUCTION(code1 __stringify(reg) code2)	\
 	"	b	99f		\n\t"		\
 	"	"codex"			\n\t"		\
 	TESTCASE_END

 #define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex)		\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)				\
 	TEST_ARG_REG(reg1, val1)						\
 	TEST_ARG_REG(reg2, val2)						\
 	TEST_ARG_END("")							\
 	TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3)	\
 	"	b	99f		\n\t"					\
 	"	"codex"			\n\t"					\
 	TESTCASE_END


 /* Various values used in test cases... */
 #define N(val)	(val ^ 0xffffffff)
 #define VAL1	0x12345678
 #define VAL2	N(VAL1)
 #define VAL3	0xa5f801
 #define VAL4	N(VAL3)
 #define VALM	0x456789ab
 #define VALR	0xdeaddead
 #define HH1	0x0123fecb
 #define HH2	0xa9874567


 #ifdef CONFIG_THUMB2_KERNEL
 void kprobe_thumb16_test_cases(void);
 void kprobe_thumb32_test_cases(void);
 #else
 void kprobe_arm_test_cases(void);
 #endif
	/*
	* arch/arm/kernel/kprobes-test.h
	*
	* Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#define VERBOSE 0 /* Set to '1' for more logging of test cases */

	#ifdef CONFIG_THUMB2_KERNEL
	#define NORMAL_ISA "16"
	#else
	#define NORMAL_ISA "32"
	#endif


	/* Flags used in kprobe_test_flags */
	#define TEST_FLAG_NO_ITBLOCK (1<<0)
	#define TEST_FLAG_FULL_ITBLOCK (1<<1)
	#define TEST_FLAG_NARROW_INSTR (1<<2)

	extern int kprobe_test_flags;
	extern int kprobe_test_cc_position;


	#define TEST_MEMORY_SIZE 256


	/*
	* Test case structures.
	*
	* The arguments given to test cases can be one of three types.
	*
	* ARG_TYPE_REG
	* Load a register with the given value.
	*
	* ARG_TYPE_PTR
	* Load a register with a pointer into the stack buffer (SP + given value).
	*
	* ARG_TYPE_MEM
	* Store the given value into the stack buffer at [SP+index].
	*
	*/

	#define ARG_TYPE_END 0
	#define ARG_TYPE_REG 1
	#define ARG_TYPE_PTR 2
	#define ARG_TYPE_MEM 3

	#define ARG_FLAG_UNSUPPORTED 0x01
	#define ARG_FLAG_SUPPORTED 0x02
	#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */
	#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */

	struct test_arg {
	u8 type; /* ARG_TYPE_x */
	u8 _padding[7];
	};

	struct test_arg_regptr {
	u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */
	u8 reg;
	u8 _padding[2];
	u32 val;
	};

	struct test_arg_mem {
	u8 type; /* ARG_TYPE_MEM */
	u8 index;
	u8 _padding[2];
	u32 val;
	};

	struct test_arg_end {
	u8 type; /* ARG_TYPE_END */
	u8 flags; /* ARG_FLAG_x */
	u16 code_offset;
	u16 branch_offset;
	u16 end_offset;
	};


	/*
	* Building blocks for test cases.
	*
	* Each test case is wrapped between TESTCASE_START and TESTCASE_END.
	*
	* To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
	* used followed by a terminating TEST_ARG_END.
	*
	* After this, the instruction to be tested is defined with TEST_INSTRUCTION.
	* Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
	*
	* Some specific test cases may make use of other custom constructs.
	*/

	#if VERBOSE
	#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
	#else
	#define verbose(fmt, ...)
	#endif

	#define TEST_GROUP(title) \
	verbose("\n"); \
	verbose(title"\n"); \
	verbose("---------------------------------------------------------\n");

	#define TESTCASE_START(title) \
	__asm__ __volatile__ ( \
	"bl __kprobes_test_case_start \n\t" \
	/* don't use .asciz here as 'title' may be */ \
	/* multiple strings to be concatenated. */ \
	".ascii "#title" \n\t" \
	".byte 0 \n\t" \
	".align 2 \n\t"

	#define TEST_ARG_REG(reg, val) \
	".byte "__stringify(ARG_TYPE_REG)" \n\t" \
	".byte "#reg" \n\t" \
	".short 0 \n\t" \
	".word "#val" \n\t"

	#define TEST_ARG_PTR(reg, val) \
	".byte "__stringify(ARG_TYPE_PTR)" \n\t" \
	".byte "#reg" \n\t" \
	".short 0 \n\t" \
	".word "#val" \n\t"

	#define TEST_ARG_MEM(index, val) \
	".byte "__stringify(ARG_TYPE_MEM)" \n\t" \
	".byte "#index" \n\t" \
	".short 0 \n\t" \
	".word "#val" \n\t"

	#define TEST_ARG_END(flags) \
	".byte "__stringify(ARG_TYPE_END)" \n\t" \
	".byte "TEST_ISA flags" \n\t" \
	".short 50f-0f \n\t" \
	".short 2f-0f \n\t" \
	".short 99f-0f \n\t" \
	".code "TEST_ISA" \n\t" \
	"0: \n\t"

	#define TEST_INSTRUCTION(instruction) \
	"50: nop \n\t" \
	"1: "instruction" \n\t" \
	" nop \n\t"

	#define TEST_BRANCH_F(instruction, xtra_dist) \
	TEST_INSTRUCTION(instruction) \
	".if "#xtra_dist" \n\t" \
	" b 99f \n\t" \
	".space "#xtra_dist" \n\t" \
	".endif \n\t" \
	" b 99f \n\t" \
	"2: nop \n\t"

	#define TEST_BRANCH_B(instruction, xtra_dist) \
	" b 50f \n\t" \
	" b 99f \n\t" \
	"2: nop \n\t" \
	" b 99f \n\t" \
	".if "#xtra_dist" \n\t" \
	".space "#xtra_dist" \n\t" \
	".endif \n\t" \
	TEST_INSTRUCTION(instruction)

	#define TESTCASE_END \
	"2: \n\t" \
	"99: \n\t" \
	" bl __kprobes_test_case_end_"TEST_ISA" \n\t" \
	".code "NORMAL_ISA" \n\t" \
	: : \
	: "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \
	);


	/*
	* Macros to define test cases.
	*
	* Those of the form TEST_{R,P,M}* can be used to define test cases
	* which take combinations of the three basic types of arguments. E.g.
	*
	* TEST_R One register argument
	* TEST_RR Two register arguments
	* TEST_RPR A register, a pointer, then a register argument
	*
	* For testing instructions which may branch, there are macros TEST_BF_*
	* and TEST_BB_* for branching forwards and backwards.
	*
	* TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
	* the just verify that a kprobe is or is not allowed on the given instruction.
	*/

	#define TEST(code) \
	TESTCASE_START(code) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code) \
	TESTCASE_END

	#define TEST_UNSUPPORTED(code) \
	TESTCASE_START(code) \
	TEST_ARG_END("\|"__stringify(ARG_FLAG_UNSUPPORTED)) \
	TEST_INSTRUCTION(code) \
	TESTCASE_END

	#define TEST_SUPPORTED(code) \
	TESTCASE_START(code) \
	TEST_ARG_END("\|"__stringify(ARG_FLAG_SUPPORTED)) \
	TEST_INSTRUCTION(code) \
	TESTCASE_END

	#define TEST_R(code1, reg, val, code2) \
	TESTCASE_START(code1 #reg code2) \
	TEST_ARG_REG(reg, val) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg code2) \
	TESTCASE_END

	#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \
	TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
	TESTCASE_END

	#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_REG(reg3, val3) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TESTCASE_END

	#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \
	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_REG(reg3, val3) \
	TEST_ARG_REG(reg4, val4) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
	TESTCASE_END

	#define TEST_P(code1, reg1, val1, code2) \
	TESTCASE_START(code1 #reg1 code2) \
	TEST_ARG_PTR(reg1, val1) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2) \
	TESTCASE_END

	#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \
	TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
	TEST_ARG_PTR(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
	TESTCASE_END

	#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \
	TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_PTR(reg2, val2) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
	TESTCASE_END

	#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TEST_ARG_PTR(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_REG(reg3, val3) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TESTCASE_END

	#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_PTR(reg2, val2) \
	TEST_ARG_REG(reg3, val3) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TESTCASE_END

	#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_PTR(reg3, val3) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
	TESTCASE_END

	#define TEST_BF_P(code1, reg1, val1, code2) \
	TESTCASE_START(code1 #reg1 code2) \
	TEST_ARG_PTR(reg1, val1) \
	TEST_ARG_END("") \
	TEST_BRANCH_F(code1 #reg1 code2, 0) \
	TESTCASE_END

	#define TEST_BF_X(code, xtra_dist) \
	TESTCASE_START(code) \
	TEST_ARG_END("") \
	TEST_BRANCH_F(code, xtra_dist) \
	TESTCASE_END

	#define TEST_BB_X(code, xtra_dist) \
	TESTCASE_START(code) \
	TEST_ARG_END("") \
	TEST_BRANCH_B(code, xtra_dist) \
	TESTCASE_END

	#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
	TESTCASE_START(code1 #reg code2) \
	TEST_ARG_REG(reg, val) \
	TEST_ARG_END("") \
	TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
	TESTCASE_END

	#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
	TESTCASE_START(code1 #reg code2) \
	TEST_ARG_REG(reg, val) \
	TEST_ARG_END("") \
	TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
	TESTCASE_END

	#define TEST_BF(code) TEST_BF_X(code, 0)
	#define TEST_BB(code) TEST_BB_X(code, 0)

	#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
	#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)

	#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
	TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_END("") \
	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
	TESTCASE_END

	#define TEST_X(code, codex) \
	TESTCASE_START(code) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code) \
	" b 99f \n\t" \
	" "codex" \n\t" \
	TESTCASE_END

	#define TEST_RX(code1, reg, val, code2, codex) \
	TESTCASE_START(code1 #reg code2) \
	TEST_ARG_REG(reg, val) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 __stringify(reg) code2) \
	" b 99f \n\t" \
	" "codex" \n\t" \
	TESTCASE_END

	#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \
	TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
	TEST_ARG_REG(reg1, val1) \
	TEST_ARG_REG(reg2, val2) \
	TEST_ARG_END("") \
	TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \
	" b 99f \n\t" \
	" "codex" \n\t" \
	TESTCASE_END


	/* Various values used in test cases... */
	#define N(val) (val ^ 0xffffffff)
	#define VAL1 0x12345678
	#define VAL2 N(VAL1)
	#define VAL3 0xa5f801
	#define VAL4 N(VAL3)
	#define VALM 0x456789ab
	#define VALR 0xdeaddead
	#define HH1 0x0123fecb
	#define HH2 0xa9874567


	#ifdef CONFIG_THUMB2_KERNEL
	void kprobe_thumb16_test_cases(void);
	void kprobe_thumb32_test_cases(void);
	#else
	void kprobe_arm_test_cases(void);
	#endif